+ uint8_t readerType = 0;
+ uint8_t MAC[4]={0x00,0x00,0x00,0x00};
+ uint8_t KEY[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CSN[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CCNR[12]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ //uint8_t CC_temp[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t div_key[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t keytable[128] = {0};
+ int elite = 0;
+ uint8_t *used_key;
+ int i;
+ if (strlen(Cmd)<1)
+ {
+ PrintAndLog("Usage: hf iclass dump <Key> [e]");
+ PrintAndLog(" Key - A 16 byte master key");
+ PrintAndLog(" e - If 'e' is specified, the key is interpreted as the 16 byte");
+ PrintAndLog(" Custom Key (KCus), which can be obtained via reader-attack");
+ PrintAndLog(" See 'hf iclass sim 2'. This key should be on iclass-format");
+ PrintAndLog(" sample: hf iclass dump 0011223344556677");
+
+
+ return 0;
+ }
+
+ if (param_gethex(Cmd, 0, KEY, 16))
+ {
+ PrintAndLog("KEY must include 16 HEX symbols");
+ return 1;
+ }
+
+ if (param_getchar(Cmd, 1) == 'e')
+ {
+ PrintAndLog("Elite switch on");
+ elite = 1;
+
+ //calc h2
+ hash2(KEY, keytable);
+ printarr_human_readable("keytable", keytable, 128);
+
+ }
+
+ UsbCommand resp;
+ uint8_t key_sel[8] = {0};
+ uint8_t key_sel_p[8] = { 0 };
+
+ UsbCommand c = {CMD_READER_ICLASS, {0}};
+ c.arg[0] = FLAG_ICLASS_READER_ONLY_ONCE| FLAG_ICLASS_READER_GET_CC;
+ SendCommand(&c);
+
+
+
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,4500))
+ {
+ PrintAndLog("Command execute timeout");
+ return 0;
+ }
+
+ uint8_t isOK = resp.arg[0] & 0xff;
+ uint8_t * data = resp.d.asBytes;
+
+ memcpy(CSN,data,8);
+ memcpy(CCNR,data+8,8);
+
+ PrintAndLog("isOk:%02x", isOK);
+
+ if(isOK > 0)
+ {
+ PrintAndLog("CSN: %s",sprint_hex(CSN,8));
+ }
+ if(isOK <= 1){
+ PrintAndLog("Failed to obtain CC! Aborting");
+ return 0;
+ }
+ //Status 2 or higher
+
+ if(elite)
+ {
+ //Get the key index (hash1)
+ uint8_t key_index[8] = {0};
+
+ hash1(CSN, key_index);
+ printvar("hash1", key_index,8);
+ for(i = 0; i < 8 ; i++)
+ key_sel[i] = keytable[key_index[i]] & 0xFF;
+ PrintAndLog("Pre-fortified 'permuted' HS key that would be needed by an iclass reader to talk to above CSN:");
+ printvar("k_sel", key_sel,8);
+ //Permute from iclass format to standard format
+ permutekey_rev(key_sel,key_sel_p);
+ used_key = key_sel_p;
+ }else{
+ used_key = KEY;
+ }
+
+ PrintAndLog("Pre-fortified key that would be needed by the OmniKey reader to talk to above CSN:");
+ printvar("Used key",used_key,8);
+ diversifyKey(CSN,used_key, div_key);
+ PrintAndLog("Hash0, a.k.a diversified key, that is computed using Ksel and stored in the card (Block 3):");
+ printvar("Div key", div_key, 8);
+ printvar("CC_NR:",CCNR,12);
+ doMAC(CCNR,12,div_key, MAC);
+ printvar("MAC", MAC, 4);
+
+ uint8_t iclass_data[32000] = {0};
+ uint32_t iclass_datalen = 0;
+ uint32_t iclass_blocksFailed = 0;//Set to 1 if dump was incomplete
+
+ UsbCommand d = {CMD_READER_ICLASS_REPLAY, {readerType}};
+ memcpy(d.d.asBytes, MAC, 4);
+ clearCommandBuffer();
+ SendCommand(&d);
+ PrintAndLog("Waiting for device to dump data. Press button on device and key on keyboard to abort...");
+ while (true) {
+ printf(".");
+ if (ukbhit()) {
+ getchar();
+ printf("\naborted via keyboard!\n");
+ break;
+ }
+ if(WaitForResponseTimeout(CMD_ACK,&resp,4500))
+ {
+ uint32_t dataLength = resp.arg[0];
+ iclass_blocksFailed |= resp.arg[1];
+ if(dataLength > 0)
+ {
+ PrintAndLog("Got %d bytes data (total so far %d)" ,dataLength,iclass_datalen);
+ memcpy(iclass_data, resp.d.asBytes,dataLength);
+ iclass_datalen += dataLength;
+ }else
+ {//Last transfer, datalength 0 means the dump is finished
+ PrintAndLog("Dumped %d bytes of data from tag. ", iclass_datalen);
+ if(iclass_blocksFailed)
+ {
+ PrintAndLog("OBS! Some blocks failed to be dumped correctly!");
+ }
+ if(iclass_datalen > 0)
+ {
+ char filename[100] = {0};
+ //create a preferred filename
+ snprintf(filename, 100,"iclass_tagdump-%02x%02x%02x%02x%02x%02x%02x%02x",
+ CSN[0],CSN[1],CSN[2],CSN[3],
+ CSN[4],CSN[5],CSN[6],CSN[7]);
+ saveFile(filename,"bin",iclass_data, iclass_datalen );
+ }
+ //Aaaand we're finished
+ return 0;
+ }
+ }
+ }
+
projects / proxmark3-svn / blobdiff