Some work on iclass, started on some better support in 'hf iclass list' and also...

[proxmark3-svn] / common / lfdemod.c

diff --git a/common/lfdemod.c b/common/lfdemod.c
index a03e7f0243d92ee4d29c556665b92af29e4b73cb..79c99f7333827988c3922c14d11f1a2220d30b4b 100644 (file)
--- a/common/lfdemod.c
+++ b/common/lfdemod.c
@@ -16,66 +16,66 @@
 //takes 1s and 0s and searches for EM410x format - output EM ID
 uint64_t Em410xDecode(uint8_t *BitStream,uint32_t BitLen)
 {
 //takes 1s and 0s and searches for EM410x format - output EM ID
 uint64_t Em410xDecode(uint8_t *BitStream,uint32_t BitLen)
 {

-  //no arguments needed - built this way in case we want this to be a direct call from "data " cmds in the future
-  //  otherwise could be a void with no arguments
-  //set defaults
-  int high=0, low=128;
-  uint64_t lo=0; //hi=0,
-
-  uint32_t i = 0;
-  uint32_t initLoopMax = 65;
-  if (initLoopMax>BitLen) initLoopMax=BitLen;
-
-  for (;i < initLoopMax; ++i) //65 samples should be plenty to find high and low values
-  {
-    if (BitStream[i] > high)
-      high = BitStream[i];
-    else if (BitStream[i] < low)
-      low = BitStream[i];
-  }
-  if (((high !=1)||(low !=0))){  //allow only 1s and 0s 
-   // PrintAndLog("no data found"); 
-    return 0;
-  }
-  uint8_t parityTest=0;
-   // 111111111 bit pattern represent start of frame
-  uint8_t frame_marker_mask[] = {1,1,1,1,1,1,1,1,1};
-  uint32_t idx = 0;
-  uint32_t ii=0;
-  uint8_t resetCnt = 0;
-  while( (idx + 64) < BitLen) {
- restart:
-    // search for a start of frame marker
-    if ( memcmp(BitStream+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0)
-    { // frame marker found
-      idx+=9;//sizeof(frame_marker_mask);
-      for (i=0; i<10;i++){
-        for(ii=0; ii<5; ++ii){
-          parityTest += BitStream[(i*5)+ii+idx];        
-        }
-        if (parityTest== ((parityTest>>1)<<1)){
-          parityTest=0;
-          for (ii=0; ii<4;++ii){
-            //hi = (hi<<1)|(lo>>31);
-            lo=(lo<<1LL)|(BitStream[(i*5)+ii+idx]);
-          }
-          //PrintAndLog("DEBUG: EM parity passed parity val: %d, i:%d, ii:%d,idx:%d, Buffer: %d%d%d%d%d,lo: %d",parityTest,i,ii,idx,BitStream[idx+ii+(i*5)-5],BitStream[idx+ii+(i*5)-4],BitStream[idx+ii+(i*5)-3],BitStream[idx+ii+(i*5)-2],BitStream[idx+ii+(i*5)-1],lo);          
-        }else {//parity failed
-          //PrintAndLog("DEBUG: EM parity failed parity val: %d, i:%d, ii:%d,idx:%d, Buffer: %d%d%d%d%d",parityTest,i,ii,idx,BitStream[idx+ii+(i*5)-5],BitStream[idx+ii+(i*5)-4],BitStream[idx+ii+(i*5)-3],BitStream[idx+ii+(i*5)-2],BitStream[idx+ii+(i*5)-1]);
-          parityTest=0;
-          idx-=8;
-          if (resetCnt>5)return 0;
-          resetCnt++;
-          goto restart;//continue;
+    //no arguments needed - built this way in case we want this to be a direct call from "data " cmds in the future
+    //  otherwise could be a void with no arguments
+    //set defaults
+    int high=0, low=128;
+    uint64_t lo=0; //hi=0,
+
+    uint32_t i = 0;
+    uint32_t initLoopMax = 65;
+    if (initLoopMax>BitLen) initLoopMax=BitLen;
+
+    for (;i < initLoopMax; ++i) //65 samples should be plenty to find high and low values
+    {
+        if (BitStream[i] > high)
+            high = BitStream[i];
+        else if (BitStream[i] < low)
+            low = BitStream[i];
+    }
+    if (((high !=1)||(low !=0))){  //allow only 1s and 0s
+        // PrintAndLog("no data found");
+        return 0;
+    }
+    uint8_t parityTest=0;
+    // 111111111 bit pattern represent start of frame
+    uint8_t frame_marker_mask[] = {1,1,1,1,1,1,1,1,1};
+    uint32_t idx = 0;
+    uint32_t ii=0;
+    uint8_t resetCnt = 0;
+    while( (idx + 64) < BitLen) {
+restart:
+        // search for a start of frame marker
+        if ( memcmp(BitStream+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0)
+        { // frame marker found
+            idx+=9;//sizeof(frame_marker_mask);
+            for (i=0; i<10;i++){
+                for(ii=0; ii<5; ++ii){
+                    parityTest += BitStream[(i*5)+ii+idx];
+                }
+                if (parityTest== ((parityTest>>1)<<1)){
+                    parityTest=0;
+                    for (ii=0; ii<4;++ii){
+                        //hi = (hi<<1)|(lo>>31);
+                        lo=(lo<<1LL)|(BitStream[(i*5)+ii+idx]);
+                    }
+                    //PrintAndLog("DEBUG: EM parity passed parity val: %d, i:%d, ii:%d,idx:%d, Buffer: %d%d%d%d%d,lo: %d",parityTest,i,ii,idx,BitStream[idx+ii+(i*5)-5],BitStream[idx+ii+(i*5)-4],BitStream[idx+ii+(i*5)-3],BitStream[idx+ii+(i*5)-2],BitStream[idx+ii+(i*5)-1],lo);
+                }else {//parity failed
+                    //PrintAndLog("DEBUG: EM parity failed parity val: %d, i:%d, ii:%d,idx:%d, Buffer: %d%d%d%d%d",parityTest,i,ii,idx,BitStream[idx+ii+(i*5)-5],BitStream[idx+ii+(i*5)-4],BitStream[idx+ii+(i*5)-3],BitStream[idx+ii+(i*5)-2],BitStream[idx+ii+(i*5)-1]);
+                    parityTest=0;
+                    idx-=8;
+                    if (resetCnt>5)return 0;
+                    resetCnt++;
+                    goto restart;//continue;
+                }
+            }
+            //skip last 5 bit parity test for simplicity.
+            return lo;
+        }else{
+            idx++;

         }
         }

-      }
-      //skip last 5 bit parity test for simplicity.
-      return lo;
-    }else{
-      idx++;

     }
     }

-  }
-  return 0;
+    return 0;

 }
 
 //by marshmellow
 }
 
 //by marshmellow


@@ -84,125 +84,125 @@ uint64_t Em410xDecode(uint8_t *BitStream,uint32_t BitLen)
 //prints binary found and saves in graphbuffer for further commands
 int askmandemod(uint8_t * BinStream,uint32_t *BitLen,int *clk, int *invert)
 {
 //prints binary found and saves in graphbuffer for further commands
 int askmandemod(uint8_t * BinStream,uint32_t *BitLen,int *clk, int *invert)
 {

-  int i;
-  int high = 0, low = 128;
-  *clk=DetectASKClock(BinStream,(size_t)*BitLen,*clk); //clock default
-
-  if (*clk<8) *clk =64;
-  if (*clk<32) *clk=32;
-  if (*invert != 0 && *invert != 1) *invert=0;
-  uint32_t initLoopMax = 200;
-  if (initLoopMax>*BitLen) initLoopMax=*BitLen;
-  // Detect high and lows 
-  for (i = 0; i < initLoopMax; ++i) //200 samples should be enough to find high and low values
-  {
-    if (BinStream[i] > high)
-      high = BinStream[i];
-    else if (BinStream[i] < low)
-      low = BinStream[i];
-  }
-  if ((high < 158) ){  //throw away static 
-    //PrintAndLog("no data found"); 
-    return -2;
-  }
-  //25% fuzz in case highs and lows aren't clipped [marshmellow]
-  high=(int)((high-128)*.75)+128;
-  low= (int)((low-128)*.75)+128;
- 
-  //PrintAndLog("DEBUG - valid high: %d - valid low: %d",high,low);
-  int lastBit = 0;  //set first clock check
-  uint32_t bitnum = 0;     //output counter
-  int tol = 0;  //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
-  if (*clk==32)tol=1;    //clock tolerance may not be needed anymore currently set to + or - 1 but could be increased for poor waves or removed entirely 
-  int iii = 0;
-  uint32_t gLen = *BitLen;
-  if (gLen > 3000) gLen=3000;
-  uint8_t errCnt =0;
-  uint32_t bestStart = *BitLen;
-  uint32_t bestErrCnt = (*BitLen/1000);
-  uint32_t maxErr = (*BitLen/1000);
-  //PrintAndLog("DEBUG - lastbit - %d",lastBit);
-  //loop to find first wave that works
-  for (iii=0; iii < gLen; ++iii){
-    if ((BinStream[iii]>=high)||(BinStream[iii]<=low)){
-      lastBit=iii-*clk;    
-      errCnt=0;
-      //loop through to see if this start location works
-      for (i = iii; i < *BitLen; ++i) {   
-        if ((BinStream[i] >= high) && ((i-lastBit)>(*clk-tol))){
-          lastBit+=*clk;
-        } else if ((BinStream[i] <= low) && ((i-lastBit)>(*clk-tol))){
-          //low found and we are expecting a bar
-          lastBit+=*clk;
-        } else {
-          //mid value found or no bar supposed to be here
-          if ((i-lastBit)>(*clk+tol)){
-            //should have hit a high or low based on clock!!
-           
-            //debug
-            //PrintAndLog("DEBUG - no wave in expected area - location: %d, expected: %d-%d, lastBit: %d - resetting search",i,(lastBit+(clk-((int)(tol)))),(lastBit+(clk+((int)(tol)))),lastBit);
-            
-            errCnt++;
-            lastBit+=*clk;//skip over until hit too many errors
-            if (errCnt>(maxErr)) break;  //allow 1 error for every 1000 samples else start over
-          }
-        }
-        if ((i-iii) >(400 * *clk)) break; //got plenty of bits
-      }
-      //we got more than 64 good bits and not all errors
-      if ((((i-iii)/ *clk) > (64+errCnt)) && (errCnt<maxErr)) {
-        //possible good read
-        if (errCnt==0){
-                                       bestStart=iii;
-                                       bestErrCnt=errCnt;
-                                       break;  //great read - finish
-        } 
-        if (errCnt<bestErrCnt){  //set this as new best run
-          bestErrCnt=errCnt;
-          bestStart = iii;
+    int i;
+    int high = 0, low = 128;
+    *clk=DetectASKClock(BinStream,(size_t)*BitLen,*clk); //clock default
+
+    if (*clk<8) *clk =64;
+    if (*clk<32) *clk=32;
+    if (*invert != 0 && *invert != 1) *invert=0;
+    uint32_t initLoopMax = 200;
+    if (initLoopMax>*BitLen) initLoopMax=*BitLen;
+    // Detect high and lows
+    for (i = 0; i < initLoopMax; ++i) //200 samples should be enough to find high and low values
+    {
+        if (BinStream[i] > high)
+            high = BinStream[i];
+        else if (BinStream[i] < low)
+            low = BinStream[i];
+    }
+    if ((high < 158) ){  //throw away static
+        //PrintAndLog("no data found");
+        return -2;
+    }
+    //25% fuzz in case highs and lows aren't clipped [marshmellow]
+    high=(int)((high-128)*.75)+128;
+    low= (int)((low-128)*.75)+128;
+
+    //PrintAndLog("DEBUG - valid high: %d - valid low: %d",high,low);
+    int lastBit = 0;  //set first clock check
+    uint32_t bitnum = 0;     //output counter
+    int tol = 0;  //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
+    if (*clk==32)tol=1;    //clock tolerance may not be needed anymore currently set to + or - 1 but could be increased for poor waves or removed entirely
+    int iii = 0;
+    uint32_t gLen = *BitLen;
+    if (gLen > 3000) gLen=3000;
+    uint8_t errCnt =0;
+    uint32_t bestStart = *BitLen;
+    uint32_t bestErrCnt = (*BitLen/1000);
+    uint32_t maxErr = (*BitLen/1000);
+    //PrintAndLog("DEBUG - lastbit - %d",lastBit);
+    //loop to find first wave that works
+    for (iii=0; iii < gLen; ++iii){
+        if ((BinStream[iii]>=high)||(BinStream[iii]<=low)){
+            lastBit=iii-*clk;
+            errCnt=0;
+            //loop through to see if this start location works
+            for (i = iii; i < *BitLen; ++i) {
+                if ((BinStream[i] >= high) && ((i-lastBit)>(*clk-tol))){
+                    lastBit+=*clk;
+                } else if ((BinStream[i] <= low) && ((i-lastBit)>(*clk-tol))){
+                    //low found and we are expecting a bar
+                    lastBit+=*clk;
+                } else {
+                    //mid value found or no bar supposed to be here
+                    if ((i-lastBit)>(*clk+tol)){
+                        //should have hit a high or low based on clock!!
+
+                        //debug
+                        //PrintAndLog("DEBUG - no wave in expected area - location: %d, expected: %d-%d, lastBit: %d - resetting search",i,(lastBit+(clk-((int)(tol)))),(lastBit+(clk+((int)(tol)))),lastBit);
+
+                        errCnt++;
+                        lastBit+=*clk;//skip over until hit too many errors
+                        if (errCnt>(maxErr)) break;  //allow 1 error for every 1000 samples else start over
+                    }
+                }
+                if ((i-iii) >(400 * *clk)) break; //got plenty of bits
+            }
+            //we got more than 64 good bits and not all errors
+            if ((((i-iii)/ *clk) > (64+errCnt)) && (errCnt<maxErr)) {
+                //possible good read
+                if (errCnt==0){
+                    bestStart=iii;
+                    bestErrCnt=errCnt;
+                    break;  //great read - finish
+                }
+                if (errCnt<bestErrCnt){  //set this as new best run
+                    bestErrCnt=errCnt;
+                    bestStart = iii;
+                }
+            }

         }
         }

-      }

     }
     }

-  }
-  if (bestErrCnt<maxErr){
-       //best run is good enough set to best run and set overwrite BinStream
-       iii=bestStart;
-       lastBit=bestStart-*clk;
-       bitnum=0;
-    for (i = iii; i < *BitLen; ++i) {   
-      if ((BinStream[i] >= high) && ((i-lastBit)>(*clk-tol))){
-        lastBit+=*clk;
-        BinStream[bitnum] =  *invert;
-        bitnum++;
-      } else if ((BinStream[i] <= low) && ((i-lastBit)>(*clk-tol))){
-        //low found and we are expecting a bar
-        lastBit+=*clk;
-        BinStream[bitnum] = 1-*invert; 
-        bitnum++;
-      } else {
-        //mid value found or no bar supposed to be here
-        if ((i-lastBit)>(*clk+tol)){
-          //should have hit a high or low based on clock!!
-         
-          //debug
-          //PrintAndLog("DEBUG - no wave in expected area - location: %d, expected: %d-%d, lastBit: %d - resetting search",i,(lastBit+(clk-((int)(tol)))),(lastBit+(clk+((int)(tol)))),lastBit);
-          if (bitnum > 0){
-            BinStream[bitnum]=77;
-            bitnum++;
-          }
-          
-          lastBit+=*clk;//skip over error
+    if (bestErrCnt<maxErr){
+        //best run is good enough set to best run and set overwrite BinStream
+        iii=bestStart;
+        lastBit=bestStart-*clk;
+        bitnum=0;
+        for (i = iii; i < *BitLen; ++i) {
+            if ((BinStream[i] >= high) && ((i-lastBit)>(*clk-tol))){
+                lastBit+=*clk;
+                BinStream[bitnum] =  *invert;
+                bitnum++;
+            } else if ((BinStream[i] <= low) && ((i-lastBit)>(*clk-tol))){
+                //low found and we are expecting a bar
+                lastBit+=*clk;
+                BinStream[bitnum] = 1-*invert;
+                bitnum++;
+            } else {
+                //mid value found or no bar supposed to be here
+                if ((i-lastBit)>(*clk+tol)){
+                    //should have hit a high or low based on clock!!
+
+                    //debug
+                    //PrintAndLog("DEBUG - no wave in expected area - location: %d, expected: %d-%d, lastBit: %d - resetting search",i,(lastBit+(clk-((int)(tol)))),(lastBit+(clk+((int)(tol)))),lastBit);
+                    if (bitnum > 0){
+                        BinStream[bitnum]=77;
+                        bitnum++;
+                    }
+
+                    lastBit+=*clk;//skip over error
+                }
+            }
+            if (bitnum >=400) break;

         }
         }

-      }
-      if (bitnum >=400) break;
+        *BitLen=bitnum;
+    } else{
+        *invert=bestStart;
+        *clk=iii;
+        return -1;

     }
     }

-    *BitLen=bitnum;
-       } else{
-       *invert=bestStart;
-       *clk=iii;
-       return -1; 
-  }    
-  return bestErrCnt;
+    return bestErrCnt;

 }
 
 //by marshmellow
 }
 
 //by marshmellow


@@ -210,46 +210,46 @@ int askmandemod(uint8_t * BinStream,uint32_t *BitLen,int *clk, int *invert)
 //run through 2 times and take least errCnt
 int manrawdecode(uint8_t * BitStream, int *bitLen)
 {
 //run through 2 times and take least errCnt
 int manrawdecode(uint8_t * BitStream, int *bitLen)
 {

-  int bitnum=0;
-  int errCnt =0;
-  int i=1;
-  int bestErr = 1000;
-  int bestRun = 0;
-  int ii=1;
-  for (ii=1;ii<3;++ii){
-       i=1;
-               for (i=i+ii;i<*bitLen-2;i+=2){
-                 if(BitStream[i]==1 && (BitStream[i+1]==0)){
-                 } else if((BitStream[i]==0)&& BitStream[i+1]==1){
-           } else {
-                     errCnt++;
-           }
-           if(bitnum>300) break;
-               }
-               if (bestErr>errCnt){
-                 bestErr=errCnt;
-                 bestRun=ii;
-               }       
-               errCnt=0;
-  }
-  errCnt=bestErr;
-  if (errCnt<20){
-       ii=bestRun;
-       i=1;
-               for (i=i+ii;i<*bitLen-2;i+=2){
-                 if(BitStream[i]==1 && (BitStream[i+1]==0)){
-                   BitStream[bitnum++]=0;
-                 } else if((BitStream[i]==0)&& BitStream[i+1]==1){
-                   BitStream[bitnum++]=1;
-           } else {
-             BitStream[bitnum++]=77;
-                     //errCnt++;
-           }
-           if(bitnum>300) break;
-               }
-       *bitLen=bitnum;
-       }   
-  return errCnt;
+    int bitnum=0;
+    int errCnt =0;
+    int i=1;
+    int bestErr = 1000;
+    int bestRun = 0;
+    int ii=1;
+    for (ii=1;ii<3;++ii){
+        i=1;
+        for (i=i+ii;i<*bitLen-2;i+=2){
+            if(BitStream[i]==1 && (BitStream[i+1]==0)){
+            } else if((BitStream[i]==0)&& BitStream[i+1]==1){
+            } else {
+                errCnt++;
+            }
+            if(bitnum>300) break;
+        }
+        if (bestErr>errCnt){
+            bestErr=errCnt;
+            bestRun=ii;
+        }
+        errCnt=0;
+    }
+    errCnt=bestErr;
+    if (errCnt<20){
+        ii=bestRun;
+        i=1;
+        for (i=i+ii;i<*bitLen-2;i+=2){
+            if(BitStream[i]==1 && (BitStream[i+1]==0)){
+                BitStream[bitnum++]=0;
+            } else if((BitStream[i]==0)&& BitStream[i+1]==1){
+                BitStream[bitnum++]=1;
+            } else {
+                BitStream[bitnum++]=77;
+                //errCnt++;
+            }
+            if(bitnum>300) break;
+        }
+        *bitLen=bitnum;
+    }
+    return errCnt;

 }
 
 
 }
 
 


@@ -257,23 +257,23 @@ int manrawdecode(uint8_t * BitStream, int *bitLen)
 //take 01 or 10 = 0 and 11 or 00 = 1
 int BiphaseRawDecode(uint8_t * BitStream, int *bitLen, int offset)
 {
 //take 01 or 10 = 0 and 11 or 00 = 1
 int BiphaseRawDecode(uint8_t * BitStream, int *bitLen, int offset)
 {

-  uint8_t bitnum=0;
-  uint32_t errCnt =0;
-  uint32_t i=1;
-       i=offset;
-       for (;i<*bitLen-2;i+=2){
-         if((BitStream[i]==1 && BitStream[i+1]==0)||(BitStream[i]==0 && BitStream[i+1]==1)){
-           BitStream[bitnum++]=1;
-         } else if((BitStream[i]==0 && BitStream[i+1]==0)||(BitStream[i]==1 && BitStream[i+1]==1)){
-           BitStream[bitnum++]=0;
-    } else {
-           BitStream[bitnum++]=77;
-      errCnt++;
+    uint8_t bitnum=0;
+    uint32_t errCnt =0;
+    uint32_t i=1;
+    i=offset;
+    for (;i<*bitLen-2;i+=2){
+        if((BitStream[i]==1 && BitStream[i+1]==0)||(BitStream[i]==0 && BitStream[i+1]==1)){
+            BitStream[bitnum++]=1;
+        } else if((BitStream[i]==0 && BitStream[i+1]==0)||(BitStream[i]==1 && BitStream[i+1]==1)){
+            BitStream[bitnum++]=0;
+        } else {
+            BitStream[bitnum++]=77;
+            errCnt++;
+        }
+        if(bitnum>250) break;

     }
     }

-    if(bitnum>250) break;
-       }  
-  *bitLen=bitnum;
-  return errCnt;
+    *bitLen=bitnum;
+    return errCnt;

 }
 
 //by marshmellow
 }
 
 //by marshmellow


@@ -282,352 +282,352 @@ int BiphaseRawDecode(uint8_t * BitStream, int *bitLen, int offset)
 //prints binary found and saves in graphbuffer for further commands
 int askrawdemod(uint8_t *BinStream, int *bitLen,int *clk, int *invert)
 {
 //prints binary found and saves in graphbuffer for further commands
 int askrawdemod(uint8_t *BinStream, int *bitLen,int *clk, int *invert)
 {

-  uint32_t i;
- // int invert=0;  //invert default
-  int high = 0, low = 128;
-  *clk=DetectASKClock(BinStream,*bitLen,*clk); //clock default
-  uint8_t BitStream[502] = {0};
-
-  if (*clk<8) *clk =64;
-  if (*clk<32) *clk=32;
-  if (*invert != 0 && *invert != 1) *invert =0;
-  uint32_t initLoopMax = 200;
-  if (initLoopMax>*bitLen) initLoopMax=*bitLen;
-  // Detect high and lows 
-  for (i = 0; i < initLoopMax; ++i) //200 samples should be plenty to find high and low values
-  {
-    if (BinStream[i] > high)
-      high = BinStream[i];
-    else if (BinStream[i] < low)
-      low = BinStream[i];
-  }
-  if ((high < 158)){  //throw away static
- //   PrintAndLog("no data found"); 
-    return -2;
-  }
-  //25% fuzz in case highs and lows aren't clipped [marshmellow]
-  high=(int)((high-128)*.75)+128;
-  low= (int)((low-128)*.75)+128;
-
-  //PrintAndLog("DEBUG - valid high: %d - valid low: %d",high,low);
-  int lastBit = 0;  //set first clock check
-  uint32_t bitnum = 0;     //output counter
-  uint8_t tol = 0;  //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
-  if (*clk==32)tol=1;    //clock tolerance may not be needed anymore currently set to + or - 1 but could be increased for poor waves or removed entirely 
-  uint32_t iii = 0;
-  uint32_t gLen = *bitLen;
-  if (gLen > 500) gLen=500;
-  uint8_t errCnt =0;
-  uint32_t bestStart = *bitLen;
-  uint32_t bestErrCnt = (*bitLen/1000);
-  uint8_t midBit=0;
-  //PrintAndLog("DEBUG - lastbit - %d",lastBit);
-  //loop to find first wave that works
-  for (iii=0; iii < gLen; ++iii){
-    if ((BinStream[iii]>=high)||(BinStream[iii]<=low)){
-      lastBit=iii-*clk;    
-      //loop through to see if this start location works
-      for (i = iii; i < *bitLen; ++i) {  
-        if ((BinStream[i] >= high) && ((i-lastBit)>(*clk-tol))){
-          lastBit+=*clk;
-          BitStream[bitnum] =  *invert;
-          bitnum++;
-          midBit=0;
-        } else if ((BinStream[i] <= low) && ((i-lastBit)>(*clk-tol))){
-          //low found and we are expecting a bar
-          lastBit+=*clk;
-          BitStream[bitnum] = 1-*invert; 
-          bitnum++;
-          midBit=0;
-        } else if ((BinStream[i]<=low) && (midBit==0) && ((i-lastBit)>((*clk/2)-tol))){
-          //mid bar?
-          midBit=1;
-          BitStream[bitnum]= 1-*invert;
-          bitnum++;
-        } else if ((BinStream[i]>=high)&&(midBit==0) && ((i-lastBit)>((*clk/2)-tol))){
-          //mid bar?
-          midBit=1;
-          BitStream[bitnum]= *invert;
-          bitnum++;
-        } else if ((i-lastBit)>((*clk/2)+tol)&&(midBit==0)){
-          //no mid bar found
-          midBit=1;
-          BitStream[bitnum]= BitStream[bitnum-1];
-          bitnum++;
-        } else {
-          //mid value found or no bar supposed to be here
-
-          if ((i-lastBit)>(*clk+tol)){
-            //should have hit a high or low based on clock!!
-            //debug
-            //PrintAndLog("DEBUG - no wave in expected area - location: %d, expected: %d-%d, lastBit: %d - resetting search",i,(lastBit+(clk-((int)(tol)))),(lastBit+(clk+((int)(tol)))),lastBit);
-            if (bitnum > 0){
-              BitStream[bitnum]=77;
-              bitnum++;
-            }
-            
+    uint32_t i;
+    // int invert=0;  //invert default
+    int high = 0, low = 128;
+    *clk=DetectASKClock(BinStream,*bitLen,*clk); //clock default
+    uint8_t BitStream[502] = {0};

 
 

-            errCnt++;
-            lastBit+=*clk;//skip over until hit too many errors
-            if (errCnt>((*bitLen/1000))){  //allow 1 error for every 1000 samples else start over
-              errCnt=0;
-              bitnum=0;//start over
-              break;
+    if (*clk<8) *clk =64;
+    if (*clk<32) *clk=32;
+    if (*invert != 0 && *invert != 1) *invert =0;
+    uint32_t initLoopMax = 200;
+    if (initLoopMax>*bitLen) initLoopMax=*bitLen;
+    // Detect high and lows
+    for (i = 0; i < initLoopMax; ++i) //200 samples should be plenty to find high and low values
+    {
+        if (BinStream[i] > high)
+            high = BinStream[i];
+        else if (BinStream[i] < low)
+            low = BinStream[i];
+    }
+    if ((high < 158)){  //throw away static
+        //   PrintAndLog("no data found");
+        return -2;
+    }
+    //25% fuzz in case highs and lows aren't clipped [marshmellow]
+    high=(int)((high-128)*.75)+128;
+    low= (int)((low-128)*.75)+128;
+
+    //PrintAndLog("DEBUG - valid high: %d - valid low: %d",high,low);
+    int lastBit = 0;  //set first clock check
+    uint32_t bitnum = 0;     //output counter
+    uint8_t tol = 0;  //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
+    if (*clk==32)tol=1;    //clock tolerance may not be needed anymore currently set to + or - 1 but could be increased for poor waves or removed entirely
+    uint32_t iii = 0;
+    uint32_t gLen = *bitLen;
+    if (gLen > 500) gLen=500;
+    uint8_t errCnt =0;
+    uint32_t bestStart = *bitLen;
+    uint32_t bestErrCnt = (*bitLen/1000);
+    uint8_t midBit=0;
+    //PrintAndLog("DEBUG - lastbit - %d",lastBit);
+    //loop to find first wave that works
+    for (iii=0; iii < gLen; ++iii){
+        if ((BinStream[iii]>=high)||(BinStream[iii]<=low)){
+            lastBit=iii-*clk;
+            //loop through to see if this start location works
+            for (i = iii; i < *bitLen; ++i) {
+                if ((BinStream[i] >= high) && ((i-lastBit)>(*clk-tol))){
+                    lastBit+=*clk;
+                    BitStream[bitnum] =  *invert;
+                    bitnum++;
+                    midBit=0;
+                } else if ((BinStream[i] <= low) && ((i-lastBit)>(*clk-tol))){
+                    //low found and we are expecting a bar
+                    lastBit+=*clk;
+                    BitStream[bitnum] = 1-*invert;
+                    bitnum++;
+                    midBit=0;
+                } else if ((BinStream[i]<=low) && (midBit==0) && ((i-lastBit)>((*clk/2)-tol))){
+                    //mid bar?
+                    midBit=1;
+                    BitStream[bitnum]= 1-*invert;
+                    bitnum++;
+                } else if ((BinStream[i]>=high)&&(midBit==0) && ((i-lastBit)>((*clk/2)-tol))){
+                    //mid bar?
+                    midBit=1;
+                    BitStream[bitnum]= *invert;
+                    bitnum++;
+                } else if ((i-lastBit)>((*clk/2)+tol)&&(midBit==0)){
+                    //no mid bar found
+                    midBit=1;
+                    BitStream[bitnum]= BitStream[bitnum-1];
+                    bitnum++;
+                } else {
+                    //mid value found or no bar supposed to be here
+
+                    if ((i-lastBit)>(*clk+tol)){
+                        //should have hit a high or low based on clock!!
+                        //debug
+                        //PrintAndLog("DEBUG - no wave in expected area - location: %d, expected: %d-%d, lastBit: %d - resetting search",i,(lastBit+(clk-((int)(tol)))),(lastBit+(clk+((int)(tol)))),lastBit);
+                        if (bitnum > 0){
+                            BitStream[bitnum]=77;
+                            bitnum++;
+                        }
+
+
+                        errCnt++;
+                        lastBit+=*clk;//skip over until hit too many errors
+                        if (errCnt>((*bitLen/1000))){  //allow 1 error for every 1000 samples else start over
+                            errCnt=0;
+                            bitnum=0;//start over
+                            break;
+                        }
+                    }
+                }
+                if (bitnum>500) break;
+            }
+            //we got more than 64 good bits and not all errors
+            if ((bitnum > (64+errCnt)) && (errCnt<(*bitLen/1000))) {
+                //possible good read
+                if (errCnt==0) break;  //great read - finish
+                if (bestStart == iii) break;  //if current run == bestErrCnt run (after exhausted testing) then finish
+                if (errCnt<bestErrCnt){  //set this as new best run
+                    bestErrCnt=errCnt;
+                    bestStart = iii;
+                }

             }
             }

-          }          

         }
         }

-        if (bitnum>500) break;
-      }
-      //we got more than 64 good bits and not all errors
-      if ((bitnum > (64+errCnt)) && (errCnt<(*bitLen/1000))) {
-        //possible good read
-        if (errCnt==0) break;  //great read - finish
-        if (bestStart == iii) break;  //if current run == bestErrCnt run (after exhausted testing) then finish 
-        if (errCnt<bestErrCnt){  //set this as new best run
-          bestErrCnt=errCnt;
-          bestStart = iii;
+        if (iii>=gLen){ //exhausted test
+            //if there was a ok test go back to that one and re-run the best run (then dump after that run)
+            if (bestErrCnt < (*bitLen/1000)) iii=bestStart;

         }
         }

-      }

     }
     }

-    if (iii>=gLen){ //exhausted test
-      //if there was a ok test go back to that one and re-run the best run (then dump after that run)
-      if (bestErrCnt < (*bitLen/1000)) iii=bestStart;
-    }
-  }
-  if (bitnum>16){
-    
-   // PrintAndLog("Data start pos:%d, lastBit:%d, stop pos:%d, numBits:%d",iii,lastBit,i,bitnum);
-    //move BitStream back to BinStream
-   // ClearGraph(0);
-    for (i=0; i < bitnum; ++i){
-      BinStream[i]=BitStream[i];
-    }
-    *bitLen=bitnum;
-   // RepaintGraphWindow();
-    //output
-   // if (errCnt>0){
-   //   PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
-   // }
-   // PrintAndLog("ASK decoded bitstream:");
-    // Now output the bitstream to the scrollback by line of 16 bits
-   // printBitStream2(BitStream,bitnum);
-    //int errCnt=0;
-    //errCnt=manrawdemod(BitStream,bitnum);
-
- //   Em410xDecode(Cmd);
-  } else return -1;
-  return errCnt;
+    if (bitnum>16){
+
+        // PrintAndLog("Data start pos:%d, lastBit:%d, stop pos:%d, numBits:%d",iii,lastBit,i,bitnum);
+        //move BitStream back to BinStream
+        // ClearGraph(0);
+        for (i=0; i < bitnum; ++i){
+            BinStream[i]=BitStream[i];
+        }
+        *bitLen=bitnum;
+        // RepaintGraphWindow();
+        //output
+        // if (errCnt>0){
+        //   PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
+        // }
+        // PrintAndLog("ASK decoded bitstream:");
+        // Now output the bitstream to the scrollback by line of 16 bits
+        // printBitStream2(BitStream,bitnum);
+        //int errCnt=0;
+        //errCnt=manrawdemod(BitStream,bitnum);
+
+        //   Em410xDecode(Cmd);
+    } else return -1;
+    return errCnt;

 }
 //translate wave to 11111100000 (1 for each short wave 0 for each long wave) 
 size_t fsk_wave_demod(uint8_t * dest, size_t size, uint8_t fchigh, uint8_t fclow)
 {
 }
 //translate wave to 11111100000 (1 for each short wave 0 for each long wave) 
 size_t fsk_wave_demod(uint8_t * dest, size_t size, uint8_t fchigh, uint8_t fclow)
 {

-       uint32_t last_transition = 0;
-       uint32_t idx = 1;
-       uint32_t maxVal=0;
-       if (fchigh==0) fchigh=10;
-       if (fclow==0) fclow=8;
-       // we do care about the actual theshold value as sometimes near the center of the
-       // wave we may get static that changes direction of wave for one value
-       // if our value is too low it might affect the read.  and if our tag or
-       // antenna is weak a setting too high might not see anything. [marshmellow]
-       if (size<100) return 0;
-       for(idx=1; idx<100; idx++){
-    if(maxVal<dest[idx]) maxVal = dest[idx];
-  }
+    uint32_t last_transition = 0;
+    uint32_t idx = 1;
+    uint32_t maxVal=0;
+    if (fchigh==0) fchigh=10;
+    if (fclow==0) fclow=8;
+    // we do care about the actual theshold value as sometimes near the center of the
+    // wave we may get static that changes direction of wave for one value
+    // if our value is too low it might affect the read.  and if our tag or
+    // antenna is weak a setting too high might not see anything. [marshmellow]
+    if (size<100) return 0;
+    for(idx=1; idx<100; idx++){
+        if(maxVal<dest[idx]) maxVal = dest[idx];
+    }

     // set close to the top of the wave threshold with 25% margin for error
     // set close to the top of the wave threshold with 25% margin for error

-    // less likely to get a false transition up there. 
+    // less likely to get a false transition up there.

     // (but have to be careful not to go too high and miss some short waves)
     // (but have to be careful not to go too high and miss some short waves)

-  uint8_t threshold_value = (uint8_t)(((maxVal-128)*.75)+128); 
- //    idx=1;
-               //uint8_t threshold_value = 127;
-       
-       // sync to first lo-hi transition, and threshold
-
-       // Need to threshold first sample
-       
-       if(dest[0] < threshold_value) dest[0] = 0;
-       else dest[0] = 1;
-
-       size_t numBits = 0;
-       // count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8)
-       // or 10 (fc/10) cycles but in practice due to noise etc we may end up with with anywhere
-       // between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10
-       for(idx = 1; idx < size; idx++) {
-               // threshold current value
-
-               if (dest[idx] < threshold_value) dest[idx] = 0;
-               else dest[idx] = 1;
-
-               // Check for 0->1 transition
-               if (dest[idx-1] < dest[idx]) { // 0 -> 1 transition
-                       if ((idx-last_transition)<(fclow-2)){            //0-5 = garbage noise
-                               //do nothing with extra garbage
-                       } else if ((idx-last_transition) < (fchigh-1)) { //6-8 = 8 waves
-                               dest[numBits]=1;
-                       } else {                                                        //9+ = 10 waves
-                               dest[numBits]=0;
-                       }
-                       last_transition = idx;
-                       numBits++;
-               }
-       }
-       return numBits; //Actually, it returns the number of bytes, but each byte represents a bit: 1 or 0
+    uint8_t threshold_value = (uint8_t)(((maxVal-128)*.75)+128);
+    // idx=1;
+    //uint8_t threshold_value = 127;
+
+    // sync to first lo-hi transition, and threshold
+
+    // Need to threshold first sample
+
+    if(dest[0] < threshold_value) dest[0] = 0;
+    else dest[0] = 1;
+
+    size_t numBits = 0;
+    // count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8)
+    // or 10 (fc/10) cycles but in practice due to noise etc we may end up with with anywhere
+    // between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10
+    for(idx = 1; idx < size; idx++) {
+        // threshold current value
+
+        if (dest[idx] < threshold_value) dest[idx] = 0;
+        else dest[idx] = 1;
+
+        // Check for 0->1 transition
+        if (dest[idx-1] < dest[idx]) { // 0 -> 1 transition
+            if ((idx-last_transition)<(fclow-2)){            //0-5 = garbage noise
+                //do nothing with extra garbage
+            } else if ((idx-last_transition) < (fchigh-1)) { //6-8 = 8 waves
+                dest[numBits]=1;
+            } else {                                                   //9+ = 10 waves
+                dest[numBits]=0;
+            }
+            last_transition = idx;
+            numBits++;
+        }
+    }
+    return numBits; //Actually, it returns the number of bytes, but each byte represents a bit: 1 or 0

 }
 
 uint32_t myround2(float f)
 {
 }
 
 uint32_t myround2(float f)
 {

-  if (f >= 2000) return 2000;//something bad happened
-  return (uint32_t) (f + (float)0.5);
+    if (f >= 2000) return 2000;//something bad happened
+    return (uint32_t) (f + (float)0.5);

 }
 
 //translate 11111100000 to 10 
 size_t aggregate_bits(uint8_t *dest,size_t size,  uint8_t rfLen, uint8_t maxConsequtiveBits, uint8_t invert,uint8_t fchigh,uint8_t fclow )// uint8_t h2l_crossing_value,uint8_t l2h_crossing_value, 
 {
 }
 
 //translate 11111100000 to 10 
 size_t aggregate_bits(uint8_t *dest,size_t size,  uint8_t rfLen, uint8_t maxConsequtiveBits, uint8_t invert,uint8_t fchigh,uint8_t fclow )// uint8_t h2l_crossing_value,uint8_t l2h_crossing_value, 
 {

-       uint8_t lastval=dest[0];
-       uint32_t idx=0;
-       size_t numBits=0;
-       uint32_t n=1;
-
-       for( idx=1; idx < size; idx++) {
-
-               if (dest[idx]==lastval) {
-                       n++;
-                       continue;
-               }
-               //if lastval was 1, we have a 1->0 crossing
-               if ( dest[idx-1]==1 ) {
-                       n=myround2((float)(n+1)/((float)(rfLen)/(float)fclow));
-                       //n=(n+1) / h2l_crossing_value;
-               } else {// 0->1 crossing
-                       n=myround2((float)(n+1)/((float)(rfLen-2)/(float)fchigh));  //-2 for fudge factor
-                       //n=(n+1) / l2h_crossing_value;
-               }
-               if (n == 0) n = 1;
-
-               if(n < maxConsequtiveBits) //Consecutive 
-               {
-                       if(invert==0){ //invert bits 
-                               memset(dest+numBits, dest[idx-1] , n);
-                       }else{
-                               memset(dest+numBits, dest[idx-1]^1 , n);        
-                       }                       
-                       numBits += n;
-               }
-               n=0;
-               lastval=dest[idx];
-       }//end for
-       return numBits;
+    uint8_t lastval=dest[0];
+    uint32_t idx=0;
+    size_t numBits=0;
+    uint32_t n=1;
+
+    for( idx=1; idx < size; idx++) {
+
+        if (dest[idx]==lastval) {
+            n++;
+            continue;
+        }
+        //if lastval was 1, we have a 1->0 crossing
+        if ( dest[idx-1]==1 ) {
+            n=myround2((float)(n+1)/((float)(rfLen)/(float)fclow));
+            //n=(n+1) / h2l_crossing_value;
+        } else {// 0->1 crossing
+            n=myround2((float)(n+1)/((float)(rfLen-2)/(float)fchigh));  //-2 for fudge factor
+            //n=(n+1) / l2h_crossing_value;
+        }
+        if (n == 0) n = 1;
+
+        if(n < maxConsequtiveBits) //Consecutive
+        {
+            if(invert==0){ //invert bits
+                memset(dest+numBits, dest[idx-1] , n);
+            }else{
+                memset(dest+numBits, dest[idx-1]^1 , n);
+            }
+            numBits += n;
+        }
+        n=0;
+        lastval=dest[idx];
+    }//end for
+    return numBits;

 }
 //by marshmellow  (from holiman's base)
 // full fsk demod from GraphBuffer wave to decoded 1s and 0s (no mandemod)
 int fskdemod(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow)
 {
 }
 //by marshmellow  (from holiman's base)
 // full fsk demod from GraphBuffer wave to decoded 1s and 0s (no mandemod)
 int fskdemod(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow)
 {

-  // FSK demodulator
-  size = fsk_wave_demod(dest, size, fchigh, fclow);
-  size = aggregate_bits(dest, size,rfLen,192,invert,fchigh,fclow);
-  return size;
+    // FSK demodulator
+    size = fsk_wave_demod(dest, size, fchigh, fclow);
+    size = aggregate_bits(dest, size,rfLen,192,invert,fchigh,fclow);
+    return size;

 }
 // loop to get raw HID waveform then FSK demodulate the TAG ID from it
 int HIDdemodFSK(uint8_t *dest, size_t size, uint32_t *hi2, uint32_t *hi, uint32_t *lo)
 {
 }
 // loop to get raw HID waveform then FSK demodulate the TAG ID from it
 int HIDdemodFSK(uint8_t *dest, size_t size, uint32_t *hi2, uint32_t *hi, uint32_t *lo)
 {

-       
-       size_t idx=0; //, found=0; //size=0,
-       // FSK demodulator
-       size = fskdemod(dest, size,50,0,10,8);
-
-       // final loop, go over previously decoded manchester data and decode into usable tag ID
-       // 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0
-       uint8_t frame_marker_mask[] = {1,1,1,0,0,0};
-       int numshifts = 0;
-       idx = 0;
-       //one scan
-       while( idx + sizeof(frame_marker_mask) < size) {
-       // search for a start of frame marker
-               if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0)
-               { // frame marker found
-                       idx+=sizeof(frame_marker_mask);
-                       while(dest[idx] != dest[idx+1] && idx < size-2)
-                       {       
-                               // Keep going until next frame marker (or error)
-                               // Shift in a bit. Start by shifting high registers
-                               *hi2 = (*hi2<<1)|(*hi>>31);
-                               *hi = (*hi<<1)|(*lo>>31);
-                               //Then, shift in a 0 or one into low
-                               if (dest[idx] && !dest[idx+1])  // 1 0
-                                       *lo=(*lo<<1)|0;
-                               else // 0 1
-                                       *lo=(*lo<<1)|1;
-                               numshifts++;
-                               idx += 2;
-                       }
-                       // Hopefully, we read a tag and  hit upon the next frame marker
-                       if(idx + sizeof(frame_marker_mask) < size)
-                       {
-                               if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0)
-                               {
-                                       //good return 
-                                       return idx;
-                               }
-                       }
-                       // reset
-                       *hi2 = *hi = *lo = 0;
-                       numshifts = 0;
-               }else   {
-                       idx++;
-               }
-       }
-       return -1;
+
+    size_t idx=0; //, found=0; //size=0,
+    // FSK demodulator
+    size = fskdemod(dest, size,50,0,10,8);
+
+    // final loop, go over previously decoded manchester data and decode into usable tag ID
+    // 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0
+    uint8_t frame_marker_mask[] = {1,1,1,0,0,0};
+    int numshifts = 0;
+    idx = 0;
+    //one scan
+    while( idx + sizeof(frame_marker_mask) < size) {
+        // search for a start of frame marker
+        if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0)
+        { // frame marker found
+            idx+=sizeof(frame_marker_mask);
+            while(dest[idx] != dest[idx+1] && idx < size-2)
+            {
+                // Keep going until next frame marker (or error)
+                // Shift in a bit. Start by shifting high registers
+                *hi2 = (*hi2<<1)|(*hi>>31);
+                *hi = (*hi<<1)|(*lo>>31);
+                //Then, shift in a 0 or one into low
+                if (dest[idx] && !dest[idx+1]) // 1 0
+                    *lo=(*lo<<1)|0;
+                else // 0 1
+                    *lo=(*lo<<1)|1;
+                numshifts++;
+                idx += 2;
+            }
+            // Hopefully, we read a tag and     hit upon the next frame marker
+            if(idx + sizeof(frame_marker_mask) < size)
+            {
+                if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0)
+                {
+                    //good return
+                    return idx;
+                }
+            }
+            // reset
+            *hi2 = *hi = *lo = 0;
+            numshifts = 0;
+        }else  {
+            idx++;
+        }
+    }
+    return -1;

 }
 
 uint32_t bytebits_to_byte(uint8_t* src, int numbits)
 {
 }
 
 uint32_t bytebits_to_byte(uint8_t* src, int numbits)
 {

-       uint32_t num = 0;
-       for(int i = 0 ; i < numbits ; i++)
-       {
-               num = (num << 1) | (*src);
-               src++;
-       }
-       return num;
+    uint32_t num = 0;
+    for(int i = 0 ; i < numbits ; i++)
+    {
+        num = (num << 1) | (*src);
+        src++;
+    }
+    return num;

 }
 
 int IOdemodFSK(uint8_t *dest, size_t size)
 {
 }
 
 int IOdemodFSK(uint8_t *dest, size_t size)
 {

-  uint32_t idx=0;
-       //make sure buffer has data
-       if (size < 66) return -1;
-       //test samples are not just noise
-       uint8_t testMax=0;
-       for(idx=0;idx<65;idx++){
-               if (testMax<dest[idx]) testMax=dest[idx];
-       }
-       idx=0;
-       //if not just noise
-       if (testMax>170){
-               // FSK demodulator
-               size = fskdemod(dest, size,64,1,10,8);  //  RF/64 and invert
-               if (size < 65) return -1;  //did we get a good demod?
-               //Index map
-               //0           10          20          30          40          50          60
-               //|           |           |           |           |           |           |
-               //01234567 8 90123456 7 89012345 6 78901234 5 67890123 4 56789012 3 45678901 23
-               //-----------------------------------------------------------------------------
-               //00000000 0 11110000 1 facility 1 version* 1 code*one 1 code*two 1 ???????? 11
-               //
-               //XSF(version)facility:codeone+codetwo
-               //Handle the data
-         uint8_t mask[] = {0,0,0,0,0,0,0,0,0,1};
-               for( idx=0; idx < (size - 65); idx++) {
-       if ( memcmp(dest + idx, mask, sizeof(mask))==0) {
-               //frame marker found
-               if (!dest[idx+8] && dest[idx+17]==1 && dest[idx+26]==1 && dest[idx+35]==1 && dest[idx+44]==1 && dest[idx+53]==1){
-                       //confirmed proper separator bits found
-                       //return start position
-                                       return (int) idx;
-                               }
-                       }               
-               }
-       }       
-       return 0;
+    uint32_t idx=0;
+    //make sure buffer has data
+    if (size < 66) return -1;
+    //test samples are not just noise
+    uint8_t testMax=0;
+    for(idx=0;idx<65;idx++){
+        if (testMax<dest[idx]) testMax=dest[idx];
+    }
+    idx=0;
+    //if not just noise
+    if (testMax>20){
+        // FSK demodulator
+        size = fskdemod(dest, size,64,1,10,8);  //  RF/64 and invert
+        if (size < 65) return -1;  //did we get a good demod?
+        //Index map
+        //0           10          20          30          40          50          60
+        //|           |           |           |           |           |           |
+        //01234567 8 90123456 7 89012345 6 78901234 5 67890123 4 56789012 3 45678901 23
+        //-----------------------------------------------------------------------------
+        //00000000 0 11110000 1 facility 1 version* 1 code*one 1 code*two 1 ???????? 11
+        //
+        //XSF(version)facility:codeone+codetwo
+        //Handle the data
+        uint8_t mask[] = {0,0,0,0,0,0,0,0,0,1};
+        for( idx=0; idx < (size - 65); idx++) {
+            if ( memcmp(dest + idx, mask, sizeof(mask))==0) {
+                //frame marker found
+                if (!dest[idx+8] && dest[idx+17]==1 && dest[idx+26]==1 && dest[idx+35]==1 && dest[idx+44]==1 && dest[idx+53]==1){
+                    //confirmed proper separator bits found
+                    //return start position
+                    return (int) idx;
+                }
+            }
+        }
+    }
+    return 0;

 }
 
 // by marshmellow
 }
 
 // by marshmellow


@@ -635,67 +635,67 @@ int IOdemodFSK(uint8_t *dest, size_t size)
 // maybe somehow adjust peak trimming value based on samples to fix?
 int DetectASKClock(uint8_t dest[], size_t size, int clock)
 {
 // maybe somehow adjust peak trimming value based on samples to fix?
 int DetectASKClock(uint8_t dest[], size_t size, int clock)
 {

-  int i=0;
-  int peak=0;
-  int low=128;
-  int clk[]={16,32,40,50,64,100,128,256};
-  int loopCnt = 256;  //don't need to loop through entire array...
-  if (size<loopCnt) loopCnt = size;
-
-  //if we already have a valid clock quit
-  for (;i<8;++i)
-       if (clk[i]==clock) return clock;
-
-  //get high and low peak
-  for (i=0;i<loopCnt;++i){
-    if(dest[i]>peak){
-      peak = dest[i]; 
-    }
-    if(dest[i]<low){
-      low = dest[i];
+    int i=0;
+    int peak=0;
+    int low=128;
+    int clk[]={16,32,40,50,64,100,128,256};
+    int loopCnt = 256;  //don't need to loop through entire array...
+    if (size<loopCnt) loopCnt = size;
+
+    //if we already have a valid clock quit
+    for (;i<8;++i)
+        if (clk[i]==clock) return clock;
+
+    //get high and low peak
+    for (i=0;i<loopCnt;++i){
+        if(dest[i]>peak){
+            peak = dest[i];
+        }
+        if(dest[i]<low){
+            low = dest[i];
+        }

     }
     }

-  }
-  peak=(int)((peak-128)*.75)+128;
-  low= (int)((low-128)*.75)+128;
-  int ii;
-  int clkCnt;
-  int tol = 0;
-  int bestErr=1000;
-  int errCnt[]={0,0,0,0,0,0,0,0};
-  //test each valid clock from smallest to greatest to see which lines up
-  for(clkCnt=0; clkCnt<6;++clkCnt){
-    if (clk[clkCnt]==32){
-      tol=1;
-    }else{
-      tol=0;
+    peak=(int)((peak-128)*.75)+128;
+    low= (int)((low-128)*.75)+128;
+    int ii;
+    int clkCnt;
+    int tol = 0;
+    int bestErr=1000;
+    int errCnt[]={0,0,0,0,0,0,0,0};
+    //test each valid clock from smallest to greatest to see which lines up
+    for(clkCnt=0; clkCnt<6;++clkCnt){
+        if (clk[clkCnt]==32){
+            tol=1;
+        }else{
+            tol=0;
+        }
+        bestErr=1000;
+        //try lining up the peaks by moving starting point (try first 256)
+        for (ii=0; ii<loopCnt; ++ii){
+            if ((dest[ii]>=peak) || (dest[ii]<=low)){
+                errCnt[clkCnt]=0;
+                // now that we have the first one lined up test rest of wave array
+                for (i=0; i<((int)(size/clk[clkCnt])-1); ++i){
+                    if (dest[ii+(i*clk[clkCnt])]>=peak || dest[ii+(i*clk[clkCnt])]<=low){
+                    }else if(dest[ii+(i*clk[clkCnt])-tol]>=peak || dest[ii+(i*clk[clkCnt])-tol]<=low){
+                    }else if(dest[ii+(i*clk[clkCnt])+tol]>=peak || dest[ii+(i*clk[clkCnt])+tol]<=low){
+                    }else{  //error no peak detected
+                        errCnt[clkCnt]++;
+                    }
+                }
+                //if we found no errors this is correct one - return this clock
+                if(errCnt[clkCnt]==0) return clk[clkCnt];
+                //if we found errors see if it is lowest so far and save it as best run
+                if(errCnt[clkCnt]<bestErr) bestErr=errCnt[clkCnt];
+            }
+        }

     }
     }

-    bestErr=1000;
-    //try lining up the peaks by moving starting point (try first 256) 
-    for (ii=0; ii<loopCnt; ++ii){
-      if ((dest[ii]>=peak) || (dest[ii]<=low)){
-        errCnt[clkCnt]=0;
-        // now that we have the first one lined up test rest of wave array
-        for (i=0; i<((int)(size/clk[clkCnt])-1); ++i){
-          if (dest[ii+(i*clk[clkCnt])]>=peak || dest[ii+(i*clk[clkCnt])]<=low){
-          }else if(dest[ii+(i*clk[clkCnt])-tol]>=peak || dest[ii+(i*clk[clkCnt])-tol]<=low){
-          }else if(dest[ii+(i*clk[clkCnt])+tol]>=peak || dest[ii+(i*clk[clkCnt])+tol]<=low){
-          }else{  //error no peak detected
-            errCnt[clkCnt]++;
-          }    
+    int iii=0;
+    int best=0;
+    for (iii=0; iii<6;++iii){
+        if (errCnt[iii]<errCnt[best]){
+            best = iii;

         }
         }

-        //if we found no errors this is correct one - return this clock
-        if(errCnt[clkCnt]==0) return clk[clkCnt];
-        //if we found errors see if it is lowest so far and save it as best run
-        if(errCnt[clkCnt]<bestErr) bestErr=errCnt[clkCnt];
-      }
-    } 
-  }
-  int iii=0;
-  int best=0;
-  for (iii=0; iii<6;++iii){
-    if (errCnt[iii]<errCnt[best]){
-      best = iii;

     }
     }

-  }
-  return clk[best];
+    return clk[best];

 }
 }