First check in.

[proxmark3-svn] / armsrc / lfops.c

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index 6b131c2617b6eca741dc34a3fe5d62e8a8606f89..11fc8c50a7864ee1f8a28d442dee66e7ac1a7af3 100644 (file)
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -8,12 +8,14 @@
 // Also routines for raw mode reading/simulating of LF waveform
 //-----------------------------------------------------------------------------
 
 // Also routines for raw mode reading/simulating of LF waveform
 //-----------------------------------------------------------------------------
 

-#include "proxmark3.h"
+#include "../include/proxmark3.h"

 #include "apps.h"
 #include "util.h"
 #include "apps.h"
 #include "util.h"

-#include "hitag2.h"
-#include "crc16.h"
+#include "../include/hitag2.h"
+#include "../common/crc16.h"

 #include "string.h"
 #include "string.h"

+#include "crapto1.h"
+#include "mifareutil.h"

 
 void LFSetupFPGAForADC(int divisor, bool lf_field)
 {
 
 void LFSetupFPGAForADC(int divisor, bool lf_field)
 {


@@ -1146,6 +1148,15 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 #define WRITE_0   144 // 192
 #define WRITE_1   400 // 432 for T55x7; 448 for E5550
 
 #define WRITE_0   144 // 192
 #define WRITE_1   400 // 432 for T55x7; 448 for E5550
 

+// VALUES TAKEN FROM EM4x function: SendForward
+//  START_GAP = 440; //(55*8)
+//  WRITE_GAP = 128; //(16*8)
+//  WRITE_1 = 256 32*8; //32 cycles at 125Khz (8us each) 1
+//    //These timings work for 4469/4269/4305 (with the 55*8 above)
+//  WRITE_0 = 23*8 , 9*8  SpinDelayUs(23*8); // (8us each) 0
+
+
+

 // Write one bit to card
 void T55xxWriteBit(int bit)
 {
 // Write one bit to card
 void T55xxWriteBit(int bit)
 {


@@ -1207,13 +1218,15 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod
 // Read one card block in page 0
 void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
 {
 // Read one card block in page 0
 void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
 {

-       uint8_t *dest = (uint8_t *)BigBuf;
-       int m=0, i=0;
+       uint8_t *dest =  mifare_get_bigbufptr();
+       uint16_t bufferlength = 16000;
+       uint32_t i = 0;
+
+       // Clear destination buffer before sending the command  0x80 = average.
+       memset(dest, 0x80, bufferlength);

   
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
   
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);

-       m = sizeof(BigBuf);
-  // Clear destination buffer before sending the command
-       memset(dest, 128, m);
+       

        // Connect the A/D to the peak-detected low-frequency path.
        SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
        // Now set up the SSC to get the ADC samples that are now streaming at us.
        // Connect the A/D to the peak-detected low-frequency path.
        SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
        // Now set up the SSC to get the ADC samples that are now streaming at us.


@@ -1254,31 +1267,33 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
        for(;;) {
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
                        AT91C_BASE_SSC->SSC_THR = 0x43;
        for(;;) {
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
                        AT91C_BASE_SSC->SSC_THR = 0x43;

+                       LED_D_ON();

                }
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
                        dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
                }
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
                        dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;

-                       // we don't care about actual value, only if it's more or less than a
-                       // threshold essentially we capture zero crossings for later analysis
-      //                       if(dest[i] < 127) dest[i] = 0; else dest[i] = 1;
-                       i++;
-                       if (i >= m) break;
+                       LED_D_OFF();
+                       ++i;
+                       if (i > bufferlength) break;

                }
        }
                }
        }

+ 
+       cmd_send(CMD_ACK,0,0,0,0,0);

   
   FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        LED_D_OFF();
   
   FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        LED_D_OFF();

-       DbpString("DONE!");

 }
 
 // Read card traceability data (page 1)
 void T55xxReadTrace(void){
 }
 
 // Read card traceability data (page 1)
 void T55xxReadTrace(void){

-       uint8_t *dest = (uint8_t *)BigBuf;
-       int m=0, i=0;
+       uint8_t *dest =  mifare_get_bigbufptr();
+       uint16_t bufferlength = 16000;
+       int i=0;
+       
+       // Clear destination buffer before sending the command 0x80 = average
+       memset(dest, 0x80, bufferlength);  

   
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
   
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);

-       m = sizeof(BigBuf);
-  // Clear destination buffer before sending the command
-       memset(dest, 128, m);
+               

        // Connect the A/D to the peak-detected low-frequency path.
        SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
        // Now set up the SSC to get the ADC samples that are now streaming at us.
        // Connect the A/D to the peak-detected low-frequency path.
        SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
        // Now set up the SSC to get the ADC samples that are now streaming at us.


@@ -1309,17 +1324,20 @@ void T55xxReadTrace(void){
        for(;;) {
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
                        AT91C_BASE_SSC->SSC_THR = 0x43;
        for(;;) {
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
                        AT91C_BASE_SSC->SSC_THR = 0x43;

+                       LED_D_ON();

                }
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
                        dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
                }
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
                        dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;

-                       i++;
-                       if (i >= m) break;
+                       LED_D_OFF();
+                       ++i;                    
+                       if (i >= bufferlength) break;

                }
        }
   
                }
        }
   

+       cmd_send(CMD_ACK,0,0,0,0,0);
+  

   FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        LED_D_OFF();
   FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        LED_D_OFF();

-       DbpString("DONE!");

 }
 
 /*-------------- Cloning routines -----------*/
 }
 
 /*-------------- Cloning routines -----------*/


@@ -1763,7 +1781,6 @@ int IsBlock1PCF7931(uint8_t *Block) {
        
        return 0;
 }
        
        return 0;
 }

-

 #define ALLOC 16
 
 void ReadPCF7931() {
 #define ALLOC 16
 
 void ReadPCF7931() {


@@ -2023,6 +2040,7 @@ void SendForward(uint8_t fwd_bit_count) {
   }
 }
 
   }
 }
 

+

 void EM4xLogin(uint32_t Password) {
   
   uint8_t fwd_bit_count;
 void EM4xLogin(uint32_t Password) {
   
   uint8_t fwd_bit_count;


@@ -2040,9 +2058,14 @@ void EM4xLogin(uint32_t Password) {
 
 void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
   
 
 void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
   

+       uint8_t *dest =  mifare_get_bigbufptr();
+       uint16_t bufferlength = 16000;
+       uint32_t i = 0;
+
+       // Clear destination buffer before sending the command  0x80 = average.
+       memset(dest, 0x80, bufferlength);
+       

   uint8_t fwd_bit_count;
   uint8_t fwd_bit_count;

-  uint8_t *dest = (uint8_t *)BigBuf;
-  int m=0, i=0;

   
   //If password mode do login
   if (PwdMode == 1) EM4xLogin(Pwd);
   
   //If password mode do login
   if (PwdMode == 1) EM4xLogin(Pwd);


@@ -2051,9 +2074,6 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
   fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
   fwd_bit_count += Prepare_Addr( Address );
   
   fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
   fwd_bit_count += Prepare_Addr( Address );
   

-  m = sizeof(BigBuf);
-  // Clear destination buffer before sending the command
-  memset(dest, 128, m);

   // Connect the A/D to the peak-detected low-frequency path.
   SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
   // Now set up the SSC to get the ADC samples that are now streaming at us.
   // Connect the A/D to the peak-detected low-frequency path.
   SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
   // Now set up the SSC to get the ADC samples that are now streaming at us.


@@ -2069,10 +2089,12 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
     }
     if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
       dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
     }
     if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
       dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;

-      i++;
-      if (i >= m) break;
+               ++i;
+      if (i >= bufferlength) break;

     }
   }
     }
   }

+  
+       cmd_send(CMD_ACK,0,0,0,0,0);

   FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
   LED_D_OFF();
 }
   FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
   LED_D_OFF();
 }