-#include <stdarg.h>
-#include <stdio.h>
-#include <time.h>
+//-----------------------------------------------------------------------------
+// Copyright (C) 2009 Michael Gernoth <michael at gernoth.net>
+// Copyright (C) 2010 iZsh <izsh at fail0verflow.com>
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// UI utilities
+//-----------------------------------------------------------------------------
#include "ui.h"
-
double CursorScaleFactor;
-int PlotGridX, PlotGridY;
+int PlotGridX, PlotGridY, PlotGridXdefault= 64, PlotGridYdefault= 64;
int offline;
+int flushAfterWrite = 0;
+extern pthread_mutex_t print_lock;
static char *logfilename = "proxmark3.log";
void PrintAndLog(char *fmt, ...)
{
- va_list argptr, argptr2;
- static FILE *logfile = NULL;
- static int logging=1;
-
- if (logging && !logfile) {
- logfile=fopen(logfilename, "a");
- if (!logfile) {
- fprintf(stderr, "Can't open logfile, logging disabled!\n");
- logging=0;
- }
- }
-
- va_start(argptr, fmt);
- va_copy(argptr2, argptr);
- vprintf(fmt, argptr);
- va_end(argptr);
- printf("\n");
- if (logging && logfile) {
- vfprintf(logfile, fmt, argptr2);
- fprintf(logfile,"\n");
- fflush(logfile);
- }
- va_end(argptr2);
+ char *saved_line;
+ int saved_point;
+ va_list argptr, argptr2;
+ static FILE *logfile = NULL;
+ static int logging = 1;
+
+ // lock this section to avoid interlacing prints from different threats
+ pthread_mutex_lock(&print_lock);
+
+ if (logging && !logfile) {
+ logfile = fopen(logfilename, "a");
+ if (!logfile) {
+ fprintf(stderr, "Can't open logfile, logging disabled!\n");
+ logging=0;
+ }
+ }
+
+ int need_hack = (rl_readline_state & RL_STATE_READCMD) > 0;
+
+ if (need_hack) {
+ saved_point = rl_point;
+ saved_line = rl_copy_text(0, rl_end);
+ rl_save_prompt();
+ rl_replace_line("", 0);
+ rl_redisplay();
+ }
+
+ va_start(argptr, fmt);
+ va_copy(argptr2, argptr);
+ vprintf(fmt, argptr);
+ printf(" "); // cleaning prompt
+ va_end(argptr);
+ printf("\n");
+
+ if (need_hack) {
+ rl_restore_prompt();
+ rl_replace_line(saved_line, 0);
+ rl_point = saved_point;
+ rl_redisplay();
+ free(saved_line);
+ }
+
+ if (logging && logfile) {
+ vfprintf(logfile, fmt, argptr2);
+ fprintf(logfile,"\n");
+ fflush(logfile);
+ }
+ va_end(argptr2);
+
+ if (flushAfterWrite == 1) {
+ fflush(NULL);
+ }
+ //release lock
+ pthread_mutex_unlock(&print_lock);
}
-void SetLogFilename(char *fn)
-{
+void SetLogFilename(char *fn) {
logfilename = fn;
}
+
+void iceFsk3(int * data, const size_t len){
+
+ int i,j;
+
+ int * output = (int* ) malloc(sizeof(int) * len);
+ memset(output, 0x00, len);
+ float fc = 0.1125f; // center frequency
+ size_t adjustedLen = len;
+
+ // create very simple low-pass filter to remove images (2nd-order Butterworth)
+ float complex iir_buf[3] = {0,0,0};
+ float b[3] = {0.003621681514929, 0.007243363029857, 0.003621681514929};
+ float a[3] = {1.000000000000000, -1.822694925196308, 0.837181651256023};
+
+ float sample = 0; // input sample read from file
+ float complex x_prime = 1.0f; // save sample for estimating frequency
+ float complex x;
+
+ for (i=0; i<adjustedLen; ++i) {
+
+ sample = data[i]+128;
+
+ // remove DC offset and mix to complex baseband
+ x = (sample - 127.5f) * cexpf( _Complex_I * 2 * M_PI * fc * i );
+
+ // apply low-pass filter, removing spectral image (IIR using direct-form II)
+ iir_buf[2] = iir_buf[1];
+ iir_buf[1] = iir_buf[0];
+ iir_buf[0] = x - a[1]*iir_buf[1] - a[2]*iir_buf[2];
+ x = b[0]*iir_buf[0] +
+ b[1]*iir_buf[1] +
+ b[2]*iir_buf[2];
+
+ // compute instantaneous frequency by looking at phase difference
+ // between adjacent samples
+ float freq = cargf(x*conjf(x_prime));
+ x_prime = x; // retain this sample for next iteration
+
+ output[i] =(freq > 0)? 10 : -10;
+ }
+
+ // show data
+ for (j=0; j<adjustedLen; ++j)
+ data[j] = output[j];
+
+ CmdLtrim("30");
+ adjustedLen -= 30;
+
+ // zero crossings.
+ for (j=0; j<adjustedLen; ++j){
+ if ( data[j] == 10) break;
+ }
+ int startOne =j;
+
+ for (;j<adjustedLen; ++j){
+ if ( data[j] == -10 ) break;
+ }
+ int stopOne = j-1;
+
+ int fieldlen = stopOne-startOne;
+
+ fieldlen = (fieldlen == 39 || fieldlen == 41)? 40 : fieldlen;
+ fieldlen = (fieldlen == 59 || fieldlen == 51)? 50 : fieldlen;
+ if ( fieldlen != 40 && fieldlen != 50){
+ printf("Detected field Length: %d \n", fieldlen);
+ printf("Can only handle 40 or 50. Aborting...\n");
+ free(output);
+ return;
+ }
+
+ // FSK sequence start == 000111
+ int startPos = 0;
+ for (i =0; i<adjustedLen; ++i){
+ int dec = 0;
+ for ( j = 0; j < 6*fieldlen; ++j){
+ dec += data[i + j];
+ }
+ if (dec == 0) {
+ startPos = i;
+ break;
+ }
+ }
+
+ printf("000111 position: %d \n", startPos);
+
+ startPos += 6*fieldlen+5;
+
+ int bit =0;
+ printf("BINARY\n");
+ printf("R/40 : ");
+ for (i =startPos ; i < adjustedLen; i += 40){
+ bit = data[i]>0 ? 1:0;
+ printf("%d", bit );
+ }
+ printf("\n");
+
+ printf("R/50 : ");
+ for (i =startPos ; i < adjustedLen; i += 50){
+ bit = data[i]>0 ? 1:0;
+ printf("%d", bit ); }
+ printf("\n");
+
+ free(output);
+}
+
+float complex cexpf (float complex Z)
+{
+ float complex Res;
+ double rho = exp (__real__ Z);
+ __real__ Res = rho * cosf(__imag__ Z);
+ __imag__ Res = rho * sinf(__imag__ Z);
+ return Res;
+}
projects / proxmark3-svn / blobdiff