+//-----------------------------------------------------------------------------
+// Copyright (C) 2009 Michael Gernoth <michael at gernoth.net>
+// Copyright (C) 2010 iZsh <izsh at fail0verflow.com>
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// UI utilities
+//-----------------------------------------------------------------------------
+
#include <stdarg.h>
+#include <stdlib.h>
#include <stdio.h>
#include <time.h>
+#include <readline/readline.h>
+#include <pthread.h>
#include "ui.h"
double CursorScaleFactor;
-int PlotGridX, PlotGridY;
+int PlotGridX, PlotGridY, PlotGridXdefault= 64, PlotGridYdefault= 64;
int offline;
+int flushAfterWrite = 0; //buzzy
+extern pthread_mutex_t print_lock;
static char *logfilename = "proxmark3.log";
void PrintAndLog(char *fmt, ...)
{
- va_list argptr, argptr2;
- static FILE *logfile = NULL;
- static int logging=1;
-
- if (logging && !logfile) {
- logfile=fopen(logfilename, "a");
- if (!logfile) {
- fprintf(stderr, "Can't open logfile, logging disabled!\n");
- logging=0;
- }
- }
-
- va_start(argptr, fmt);
- va_copy(argptr2, argptr);
- vprintf(fmt, argptr);
- va_end(argptr);
- printf("\n");
- if (logging && logfile) {
- vfprintf(logfile, fmt, argptr2);
- fprintf(logfile,"\n");
- fflush(logfile);
- }
- va_end(argptr2);
+ char *saved_line;
+ int saved_point;
+ va_list argptr, argptr2;
+ static FILE *logfile = NULL;
+ static int logging=1;
+
+ // lock this section to avoid interlacing prints from different threats
+ pthread_mutex_lock(&print_lock);
+
+ if (logging && !logfile) {
+ logfile=fopen(logfilename, "a");
+ if (!logfile) {
+ fprintf(stderr, "Can't open logfile, logging disabled!\n");
+ logging=0;
+ }
+ }
+
+ int need_hack = (rl_readline_state & RL_STATE_READCMD) > 0;
+
+ if (need_hack) {
+ saved_point = rl_point;
+ saved_line = rl_copy_text(0, rl_end);
+ rl_save_prompt();
+ rl_replace_line("", 0);
+ rl_redisplay();
+ }
+
+ va_start(argptr, fmt);
+ va_copy(argptr2, argptr);
+ vprintf(fmt, argptr);
+ printf(" "); // cleaning prompt
+ va_end(argptr);
+ printf("\n");
+
+ if (need_hack) {
+ rl_restore_prompt();
+ rl_replace_line(saved_line, 0);
+ rl_point = saved_point;
+ rl_redisplay();
+ free(saved_line);
+ }
+
+ if (logging && logfile) {
+ vfprintf(logfile, fmt, argptr2);
+ fprintf(logfile,"\n");
+ fflush(logfile);
+ }
+ va_end(argptr2);
+
+ if (flushAfterWrite == 1) //buzzy
+ {
+ fflush(NULL);
+ }
+ //release lock
+ pthread_mutex_unlock(&print_lock);
}
+
void SetLogFilename(char *fn)
{
logfilename = fn;
}
+
+
+uint8_t manchester_decode(const uint8_t * data, const size_t len, uint8_t * dataout){
+
+ size_t bytelength = len;
+
+ uint8_t bitStream[bytelength];
+ memset(bitStream, 0x00, bytelength);
+
+ int clock,high, low, bit, hithigh, hitlow, first, bit2idx, lastpeak;
+ int i,invert, lastval;
+ int bitidx = 0;
+ int lc = 0;
+ int warnings = 0;
+ high = 1;
+ low = bit = bit2idx = lastpeak = invert = lastval = hithigh = hitlow = first = 0;
+ clock = 0xFFFF;
+
+ /* Detect high and lows */
+ for (i = 0; i < bytelength; i++) {
+ if (data[i] > high)
+ high = data[i];
+ else if (data[i] < low)
+ low = data[i];
+ }
+
+ /* get clock */
+ int j=0;
+ for (i = 1; i < bytelength; i++) {
+ /* if this is the beginning of a peak */
+ j = i-1;
+ if ( data[j] != data[i] &&
+ data[i] == high)
+ {
+ /* find lowest difference between peaks */
+ if (lastpeak && i - lastpeak < clock)
+ clock = i - lastpeak;
+ lastpeak = i;
+ }
+ }
+
+ int tolerance = clock/4;
+ PrintAndLog(" Detected clock: %d",clock);
+
+ /* Detect first transition */
+ /* Lo-Hi (arbitrary) */
+ /* skip to the first high */
+ for (i= 0; i < bytelength; i++)
+ if (data[i] == high)
+ break;
+
+ /* now look for the first low */
+ for (; i < bytelength; i++) {
+ if (data[i] == low) {
+ lastval = i;
+ break;
+ }
+ }
+
+ /* If we're not working with 1/0s, demod based off clock */
+ if (high != 1)
+ {
+ bit = 0; /* We assume the 1st bit is zero, it may not be
+ * the case: this routine (I think) has an init problem.
+ * Ed.
+ */
+ for (; i < (int)(bytelength / clock); i++)
+ {
+ hithigh = 0;
+ hitlow = 0;
+ first = 1;
+
+ /* Find out if we hit both high and low peaks */
+ for (j = 0; j < clock; j++)
+ {
+ if (data[(i * clock) + j] == high)
+ hithigh = 1;
+ else if (data[(i * clock) + j] == low)
+ hitlow = 1;
+
+ /* it doesn't count if it's the first part of our read
+ because it's really just trailing from the last sequence */
+ if (first && (hithigh || hitlow))
+ hithigh = hitlow = 0;
+ else
+ first = 0;
+
+ if (hithigh && hitlow)
+ break;
+ }
+
+ /* If we didn't hit both high and low peaks, we had a bit transition */
+ if (!hithigh || !hitlow)
+ bit ^= 1;
+
+ bitStream[bit2idx++] = bit ^ invert;
+ }
+ }
+ /* standard 1/0 bitstream */
+ else {
+ /* Then detect duration between 2 successive transitions */
+ for (bitidx = 1; i < bytelength; i++) {
+
+ if (data[i-1] != data[i]) {
+ lc = i-lastval;
+ lastval = i;
+
+ // Error check: if bitidx becomes too large, we do not
+ // have a Manchester encoded bitstream or the clock is really
+ // wrong!
+ if (bitidx > (bytelength*2/clock+8) ) {
+ PrintAndLog("Error: the clock you gave is probably wrong, aborting.");
+ return 0;
+ }
+ // Then switch depending on lc length:
+ // Tolerance is 1/4 of clock rate (arbitrary)
+ if (abs(lc-clock/2) < tolerance) {
+ // Short pulse : either "1" or "0"
+ bitStream[bitidx++] = data[i-1];
+ } else if (abs(lc-clock) < tolerance) {
+ // Long pulse: either "11" or "00"
+ bitStream[bitidx++] = data[i-1];
+ bitStream[bitidx++] = data[i-1];
+ } else {
+ // Error
+ warnings++;
+ PrintAndLog("Warning: Manchester decode error for pulse width detection.");
+ if (warnings > 10) {
+ PrintAndLog("Error: too many detection errors, aborting.");
+ return 0;
+ }
+ }
+ }
+ }
+ }
+ // At this stage, we now have a bitstream of "01" ("1") or "10" ("0"), parse it into final decoded bitstream
+ // Actually, we overwrite BitStream with the new decoded bitstream, we just need to be careful
+ // to stop output at the final bitidx2 value, not bitidx
+ for (i = 0; i < bitidx; i += 2) {
+ if ((bitStream[i] == 0) && (bitStream[i+1] == 1)) {
+ bitStream[bit2idx++] = 1 ^ invert;
+ }
+ else if ((bitStream[i] == 1) && (bitStream[i+1] == 0)) {
+ bitStream[bit2idx++] = 0 ^ invert;
+ }
+ else {
+ // We cannot end up in this state, this means we are unsynchronized,
+ // move up 1 bit:
+ i++;
+ warnings++;
+ PrintAndLog("Unsynchronized, resync...");
+ if (warnings > 10) {
+ PrintAndLog("Error: too many decode errors, aborting.");
+ return 0;
+ }
+ }
+ }
+
+ // PrintAndLog(" Manchester decoded bitstream : %d bits", (bit2idx-16));
+ // uint8_t mod = (bit2idx-16) % blocksize;
+ // uint8_t div = (bit2idx-16) / blocksize;
+
+ // // Now output the bitstream to the scrollback by line of 16 bits
+ // for (i = 0; i < div*blocksize; i+=blocksize) {
+ // PrintAndLog(" %s", sprint_bin(bitStream+i,blocksize) );
+ // }
+ // if ( mod > 0 ){
+ // PrintAndLog(" %s", sprint_bin(bitStream+i, mod) );
+ // }
+
+ if ( bit2idx > 0 )
+ memcpy(dataout, bitStream, bit2idx);
+
+ free(bitStream);
+ return bit2idx;
+}
+
+void PrintPaddedManchester( uint8_t* bitStream, size_t len, size_t blocksize){
+
+ PrintAndLog(" Manchester decoded bitstream : %d bits", len);
+
+ uint8_t mod = len % blocksize;
+ uint8_t div = len / blocksize;
+ int i;
+ // Now output the bitstream to the scrollback by line of 16 bits
+ for (i = 0; i < div*blocksize; i+=blocksize) {
+ PrintAndLog(" %s", sprint_bin(bitStream+i,blocksize) );
+ }
+ if ( mod > 0 ){
+ PrintAndLog(" %s", sprint_bin(bitStream+i, mod) );
+ }
+}
projects / proxmark3-svn / blobdiff