armsrc/fpgaloader.c: forgot the copyright notice

[proxmark3-svn] / armsrc / appmain.c

diff --git a/armsrc/appmain.c b/armsrc/appmain.c
index b5a85deba690cef7d98e0a4629a16b4d163f218b..b7bc87e70c631fe8be5c7901e0c96462f7292d32 100644 (file)
--- a/armsrc/appmain.c
+++ b/armsrc/appmain.c
@@ -214,6 +214,7 @@ void MeasureAntennaTuning(void)
  * ( hopefully around 95 if it is tuned to 125kHz!)
  */
   
  * ( hopefully around 95 if it is tuned to 125kHz!)
  */
   

+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);

        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
        for (i=255; i>19; i--) {
     WDT_HIT();
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
        for (i=255; i>19; i--) {
     WDT_HIT();


@@ -236,6 +237,7 @@ void MeasureAntennaTuning(void)
 
   LED_A_ON();
        // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
 
   LED_A_ON();
        // Let the FPGA drive the high-frequency antenna around 13.56 MHz.

+       FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
        SpinDelay(20);
        // Vref = 3300mV, and an 10:1 voltage divider on the input
        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
        SpinDelay(20);
        // Vref = 3300mV, and an 10:1 voltage divider on the input


@@ -264,6 +266,7 @@ void MeasureAntennaTuningHf(void)
 
        for (;;) {
                // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
 
        for (;;) {
                // Let the FPGA drive the high-frequency antenna around 13.56 MHz.

+               FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

                FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
                SpinDelay(20);
                // Vref = 3300mV, and an 10:1 voltage divider on the input
                FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
                SpinDelay(20);
                // Vref = 3300mV, and an 10:1 voltage divider on the input


@@ -286,6 +289,7 @@ void SimulateTagHfListen(void)
 
        // We're using this mode just so that I can test it out; the simulated
        // tag mode would work just as well and be simpler.
 
        // We're using this mode just so that I can test it out; the simulated
        // tag mode would work just as well and be simpler.

+       FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP);
 
        // We need to listen to the high-frequency, peak-detected path.
        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP);
 
        // We need to listen to the high-frequency, peak-detected path.


@@ -336,7 +340,7 @@ extern struct version_information version_information;
 extern char *_bootphase1_version_pointer, _flash_start, _flash_end;
 void SendVersion(void)
 {
 extern char *_bootphase1_version_pointer, _flash_start, _flash_end;
 void SendVersion(void)
 {

-       char temp[48]; /* Limited data payload in USB packets */
+       char temp[256]; /* Limited data payload in USB packets */

        DbpString("Prox/RFID mark3 RFID instrument");
 
        /* Try to find the bootrom version information. Expect to find a pointer at
        DbpString("Prox/RFID mark3 RFID instrument");
 
        /* Try to find the bootrom version information. Expect to find a pointer at


@@ -365,6 +369,7 @@ void SendVersion(void)
 void SamyRun()
 {
        DbpString("Stand-alone mode! No PC necessary.");
 void SamyRun()
 {
        DbpString("Stand-alone mode! No PC necessary.");

+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);

 
        // 3 possible options? no just 2 for now
 #define OPTS 2
 
        // 3 possible options? no just 2 for now
 #define OPTS 2


@@ -639,9 +644,15 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_HID_SIM_TAG:
                        CmdHIDsimTAG(c->arg[0], c->arg[1], 1);                                  // Simulate HID tag by ID
                        break;
                case CMD_HID_SIM_TAG:
                        CmdHIDsimTAG(c->arg[0], c->arg[1], 1);                                  // Simulate HID tag by ID
                        break;

-    case CMD_HID_CLONE_TAG: // Clone HID tag by ID to T55x7
+               case CMD_HID_CLONE_TAG: // Clone HID tag by ID to T55x7

                        CopyHIDtoT55x7(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
                        break;
                        CopyHIDtoT55x7(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
                        break;

+               case CMD_IO_DEMOD_FSK:
+                       CmdIOdemodFSK(1, 0, 0, 1);                                      // Demodulate IO tag
+                       break;
+               case CMD_IO_CLONE_TAG: // Clone IO tag by ID to T55x7
+                       CopyIOtoT55x7(c->arg[0], c->arg[1], c->d.asBytes[0]);
+                       break;

                case CMD_EM410X_WRITE_TAG:
                        WriteEM410x(c->arg[0], c->arg[1], c->arg[2]);
                        break;
                case CMD_EM410X_WRITE_TAG:
                        WriteEM410x(c->arg[0], c->arg[1], c->arg[2]);
                        break;


@@ -782,12 +793,24 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_MIFARE_READBL:
                        MifareReadBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_READBL:
                        MifareReadBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;

+               case CMD_MIFAREU_READBL:
+                       MifareUReadBlock(c->arg[0],c->d.asBytes);
+                       break;
+               case CMD_MIFAREU_READCARD:
+                       MifareUReadCard(c->arg[0],c->d.asBytes);
+                        break;

                case CMD_MIFARE_READSC:
                        MifareReadSector(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_WRITEBL:
                        MifareWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_READSC:
                        MifareReadSector(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_WRITEBL:
                        MifareWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;

+               case CMD_MIFAREU_WRITEBL_COMPAT:
+                       MifareUWriteBlock(c->arg[0], c->d.asBytes);
+                        break;
+               case CMD_MIFAREU_WRITEBL:
+                        MifareUWriteBlock_Special(c->arg[0], c->d.asBytes);
+                        break;

                case CMD_MIFARE_NESTED:
                        MifareNested(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_NESTED:
                        MifareNested(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;


@@ -905,6 +928,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        break;
 
                case CMD_SET_LF_DIVISOR:
                        break;
 
                case CMD_SET_LF_DIVISOR:

+                       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);

                        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->arg[0]);
                        break;
 
                        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->arg[0]);
                        break;
 


@@ -999,7 +1023,8 @@ void  __attribute__((noreturn)) AppMain(void)
        AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
 
        // Load the FPGA image, which we have stored in our flash.
        AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
 
        // Load the FPGA image, which we have stored in our flash.

-       FpgaDownloadAndGo();
+       // (the HF version by default)
+       FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

 
        StartTickCount();
        
 
        StartTickCount();