avoid compiler warning in client/cliparser/argtable3.c (#746)

[proxmark3-svn] / common / protocols.h

diff --git a/common/protocols.h b/common/protocols.h
index bb888d3ddf52f25945cfd1b37d778508bb1590ad..06a80de14e16e08796f4cdfc7f7a984f24f0d590 100644 (file)
--- a/common/protocols.h
+++ b/common/protocols.h
@@ -167,22 +167,50 @@ NXP/Philips CUSTOM COMMANDS
 #define ISO14443B_COMPLETION   0x0F
 #define ISO14443B_AUTHENTICATE 0x0A
 
-//First byte is 26
-#define ISO15693_INVENTORY     0x01
-#define ISO15693_STAYQUIET     0x02
-//First byte is 02
-#define ISO15693_READBLOCK            0x20
-#define ISO15693_WRITEBLOCK           0x21
-#define ISO15693_LOCKBLOCK            0x22
-#define ISO15693_READ_MULTI_BLOCK     0x23
-#define ISO15693_SELECT               0x25
-#define ISO15693_RESET_TO_READY       0x26
-#define ISO15693_WRITE_AFI            0x27
-#define ISO15693_LOCK_AFI             0x28
-#define ISO15693_WRITE_DSFID          0x29
-#define ISO15693_LOCK_DSFID           0x2A
-#define ISO15693_GET_SYSTEM_INFO      0x2B
-#define ISO15693_READ_MULTI_SECSTATUS 0x2C
+// ISO15693 COMMANDS
+#define ISO15693_INVENTORY                   0x01
+#define ISO15693_STAYQUIET                   0x02
+#define ISO15693_READBLOCK                   0x20
+#define ISO15693_WRITEBLOCK                  0x21
+#define ISO15693_LOCKBLOCK                   0x22
+#define ISO15693_READ_MULTI_BLOCK            0x23
+#define ISO15693_SELECT                      0x25
+#define ISO15693_RESET_TO_READY              0x26
+#define ISO15693_WRITE_AFI                   0x27
+#define ISO15693_LOCK_AFI                    0x28
+#define ISO15693_WRITE_DSFID                 0x29
+#define ISO15693_LOCK_DSFID                  0x2A
+#define ISO15693_GET_SYSTEM_INFO             0x2B
+#define ISO15693_READ_MULTI_SECSTATUS        0x2C
+
+// ISO15693 REQUEST FLAGS
+#define ISO15693_REQ_SUBCARRIER_TWO          (1<<0)
+#define ISO15693_REQ_DATARATE_HIGH           (1<<1)
+#define ISO15693_REQ_INVENTORY               (1<<2)
+#define ISO15693_REQ_PROTOCOL_EXT            (1<<3) // RFU
+#define ISO15693_REQ_OPTION                  (1<<6) // Command specific option selector
+// when REQ_INVENTORY is not set
+#define ISO15693_REQ_SELECT                  (1<<4) // only selected cards response
+#define ISO15693_REQ_ADDRESS                 (1<<5) // this req contains an address
+// when REQ_INVENTORY is set
+#define ISO15693_REQINV_AFI                  (1<<4) // AFI Field is present
+#define ISO15693_REQINV_SLOT1                (1<<5) // 1 Slot     (16 slots if not set)
+
+// ISO15693 RESPONSE FLAGS
+#define ISO15693_RES_ERROR                   (1<<0)
+#define ISO15693_RES_EXT                     (1<<3) // Protocol Extention      
+
+// ISO15693 RESPONSE ERROR CODES
+#define ISO15693_NOERROR                     0x00
+#define ISO15693_ERROR_CMD_NOT_SUP           0x01 // Command not supported
+#define ISO15693_ERROR_CMD_NOT_REC           0x02 // Command not recognized (eg. parameter error)
+#define ISO15693_ERROR_CMD_OPTION            0x03 // Command option not supported
+#define ISO15693_ERROR_GENERIC               0x0F // No additional Info about this error
+#define ISO15693_ERROR_BLOCK_UNAVAILABLE     0x10
+#define ISO15693_ERROR_BLOCK_LOCKED_ALREADY  0x11 // cannot lock again
+#define ISO15693_ERROR_BLOCK_LOCKED          0x12 // cannot be changed
+#define ISO15693_ERROR_BLOCK_WRITE           0x13 // Writing was unsuccessful
+#define ISO15693_ERROR_BLOCL_WRITELOCK       0x14 // Locking was unsuccessful
 
 
 // Topaz command set:
@@ -200,10 +228,12 @@ NXP/Philips CUSTOM COMMANDS
 #define TOPAZ_WRITE_NE8                                        0x1B    // Write-no-erase (eight bytes)
 
 
-#define ISO_14443A     0
-#define ICLASS         1
-#define ISO_14443B     2
-#define TOPAZ          3
+#define ISO_14443A    0
+#define ICLASS        1
+#define ISO_14443B    2
+#define TOPAZ         3
+#define PROTO_MIFARE  4
+#define ISO_7816_4    5
 
 //-- Picopass fuses
 #define FUSE_FPERS   0x80
@@ -215,6 +245,29 @@ NXP/Philips CUSTOM COMMANDS
 #define FUSE_FPROD0  0x02
 #define FUSE_RA      0x01
 
+// ISO 7816-4 Basic interindustry commands. For command APDU's.
+#define ISO7816_READ_BINARY              0xB0
+#define ISO7816_WRITE_BINARY             0xD0
+#define ISO7816_UPDATE_BINARY            0xD6
+#define ISO7816_ERASE_BINARY             0x0E
+#define ISO7816_READ_RECORDS             0xB2
+#define ISO7816_WRITE_RECORDS            0xD2
+#define ISO7816_APPEND_RECORD            0xE2
+#define ISO7816_UPDATE_RECORD            0xDC
+#define ISO7816_GET_DATA                 0xCA
+#define ISO7816_PUT_DATA                 0xDA
+#define ISO7816_SELECT_FILE              0xA4
+#define ISO7816_VERIFY                   0x20
+#define ISO7816_INTERNAL_AUTHENTICATION  0x88
+#define ISO7816_EXTERNAL_AUTHENTICATION  0x82
+#define ISO7816_GET_CHALLENGE            0xB4
+#define ISO7816_MANAGE_CHANNEL           0x70
+// ISO7816-4   For response APDU's
+#define ISO7816_OK                       0x9000
+//     6x xx = ERROR
+
+
+
 void printIclassDumpInfo(uint8_t* iclass_dump);
 void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);
 
@@ -238,6 +291,7 @@ void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *
 #define T55x7_MODULATION_MANCHESTER 0x00008000
 #define T55x7_MODULATION_BIPHASE    0x00010000
 #define T55x7_MODULATION_DIPHASE    0x00018000
+#define T55x7_X_MODE                0x00020000
 #define T55x7_BITRATE_RF_8          0
 #define T55x7_BITRATE_RF_16         0x00040000
 #define T55x7_BITRATE_RF_32         0x00080000