Merge pull request #4 from gcohen55/ubuntu_makefile

[proxmark3-svn] / armsrc / lfops.c

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index c26d063b847fb1facdaea0b5ad714ca8249ff73a..3c7a544ebf9f0a95c7995b51d74ae34338639155 100644 (file)
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -402,7 +402,7 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
        for(;;) {
                //wait until SSC_CLK goes HIGH
                while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
        for(;;) {
                //wait until SSC_CLK goes HIGH
                while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {

-                       if(BUTTON_PRESS() || usb_poll()) {
+                       if(BUTTON_PRESS() || (usb_poll_validate_length() )) {

                                DbpString("Stopped");
                                return;
                        }
                                DbpString("Stopped");
                                return;
                        }


@@ -762,7 +762,7 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
        // Configure to go in 125Khz listen mode
        LFSetupFPGAForADC(95, true);
 
        // Configure to go in 125Khz listen mode
        LFSetupFPGAForADC(95, true);
 

-       while(!BUTTON_PRESS()) {
+       while(!BUTTON_PRESS() && !usb_poll_validate_length()) {

 
                WDT_HIT();
                if (ledcontrol) LED_A_ON();
 
                WDT_HIT();
                if (ledcontrol) LED_A_ON();


@@ -841,6 +841,96 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
        if (ledcontrol) LED_A_OFF();
 }
 
        if (ledcontrol) LED_A_OFF();
 }
 

+// loop to get raw HID waveform then FSK demodulate the TAG ID from it
+void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
+{
+       uint8_t *dest = BigBuf_get_addr();
+       //const size_t sizeOfBigBuff = BigBuf_max_traceLen();
+       size_t size; 
+       int idx=0;
+       // Configure to go in 125Khz listen mode
+       LFSetupFPGAForADC(95, true);
+
+       while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
+
+               WDT_HIT();
+               if (ledcontrol) LED_A_ON();
+
+               DoAcquisition_default(-1,true);
+               // FSK demodulator
+               //size = sizeOfBigBuff;  //variable size will change after demod so re initialize it before use
+               size = 50*128*2; //big enough to catch 2 sequences of largest format
+               idx = AWIDdemodFSK(dest, &size);
+               
+               if (idx>0 && size==96){
+               // Index map
+               // 0            10            20            30              40            50              60
+               // |            |             |             |               |             |               |
+               // 01234567 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 - to 96
+               // -----------------------------------------------------------------------------
+               // 00000001 000 1 110 1 101 1 011 1 101 1 010 0 000 1 000 1 010 0 001 0 110 1 100 0 000 1 000 1
+               // premable bbb o bbb o bbw o fff o fff o ffc o ccc o ccc o ccc o ccc o ccc o wxx o xxx o xxx o - to 96
+               //          |---26 bit---|    |-----117----||-------------142-------------|
+               // b = format bit len, o = odd parity of last 3 bits
+               // f = facility code, c = card number
+               // w = wiegand parity
+               // (26 bit format shown)
+
+               //get raw ID before removing parities
+               uint32_t rawLo = bytebits_to_byte(dest+idx+64,32);
+               uint32_t rawHi = bytebits_to_byte(dest+idx+32,32);
+               uint32_t rawHi2 = bytebits_to_byte(dest+idx,32);
+
+               size = removeParity(dest, idx+8, 4, 1, 88);
+               // ok valid card found!
+
+               // Index map
+               // 0           10         20        30          40        50        60
+               // |           |          |         |           |         |         |
+               // 01234567 8 90123456 7890123456789012 3 456789012345678901234567890123456
+               // -----------------------------------------------------------------------------
+               // 00011010 1 01110101 0000000010001110 1 000000000000000000000000000000000
+               // bbbbbbbb w ffffffff cccccccccccccccc w xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+               // |26 bit|   |-117--| |-----142------|
+               // b = format bit len, o = odd parity of last 3 bits
+               // f = facility code, c = card number
+               // w = wiegand parity
+               // (26 bit format shown)
+
+               uint32_t fc = 0;
+               uint32_t cardnum = 0;
+               uint32_t code1 = 0;
+               uint32_t code2 = 0;
+               uint8_t fmtLen = bytebits_to_byte(dest,8);
+               if (fmtLen==26){
+                       fc = bytebits_to_byte(dest+9, 8);
+                       cardnum = bytebits_to_byte(dest+17, 16);
+                       code1 = bytebits_to_byte(dest+8,fmtLen);
+                       Dbprintf("AWID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi2, rawHi, rawLo);
+               } else {
+                       cardnum = bytebits_to_byte(dest+8+(fmtLen-17), 16);
+                       if (fmtLen>32){
+                        code1 = bytebits_to_byte(dest+8,fmtLen-32);
+                        code2 = bytebits_to_byte(dest+8+(fmtLen-32),32);
+                        Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x%08x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, code2, rawHi2, rawHi, rawLo);
+                } else{
+                        code1 = bytebits_to_byte(dest+8,fmtLen);
+                        Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, rawHi2, rawHi, rawLo);
+                }
+                       }
+                       if (findone){
+                               if (ledcontrol) LED_A_OFF();
+                               return;
+                       }
+                       // reset
+               }
+               idx = 0;
+               WDT_HIT();
+       }
+       DbpString("Stopped");
+       if (ledcontrol) LED_A_OFF();
+}
+

 void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
 {
        uint8_t *dest = BigBuf_get_addr();
 void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
 {
        uint8_t *dest = BigBuf_get_addr();


@@ -852,7 +942,7 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
        // Configure to go in 125Khz listen mode
        LFSetupFPGAForADC(95, true);
 
        // Configure to go in 125Khz listen mode
        LFSetupFPGAForADC(95, true);
 

-       while(!BUTTON_PRESS()) {
+       while(!BUTTON_PRESS() && !usb_poll_validate_length()) {

 
                WDT_HIT();
                if (ledcontrol) LED_A_ON();
 
                WDT_HIT();
                if (ledcontrol) LED_A_ON();


@@ -913,7 +1003,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
        // Configure to go in 125Khz listen mode
        LFSetupFPGAForADC(95, true);
 
        // Configure to go in 125Khz listen mode
        LFSetupFPGAForADC(95, true);
 

-       while(!BUTTON_PRESS()) {
+       while(!BUTTON_PRESS() && !usb_poll_validate_length()) {

                WDT_HIT();
                if (ledcontrol) LED_A_ON();
                DoAcquisition_default(-1,true);
                WDT_HIT();
                if (ledcontrol) LED_A_ON();
                DoAcquisition_default(-1,true);


@@ -1043,10 +1133,10 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
  * To compensate antenna falling times shorten the write times
  * and enlarge the gap ones.
  */
  * To compensate antenna falling times shorten the write times
  * and enlarge the gap ones.
  */

-#define START_GAP 31*8 // was 250 // SPEC:   8 - 50fc [15fc]
-#define WRITE_GAP 20*8 // was 160 // SPEC:   8 - 20fc [10fc]
-#define WRITE_0   18*8 // was 144 // SPEC:  16 - 32fc [24fc]  192
-#define WRITE_1   50*8 // was 400 // SPEC:  48 - 64fc [56fc]  432 for T55x7; 448 for E5550
+#define START_GAP 31*8 // was 250 // SPEC:  1*8 to 50*8 - typ 15*8 (or 15fc)
+#define WRITE_GAP 20*8 // was 160 // SPEC:  1*8 to 20*8 - typ 10*8 (or 10fc)
+#define WRITE_0   18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc)
+#define WRITE_1   50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc)  432 for T55x7; 448 for E5550

 
 //  VALUES TAKEN FROM EM4x function: SendForward
 //  START_GAP = 440;       (55*8) cycles at 125Khz (8us = 1cycle)
 
 //  VALUES TAKEN FROM EM4x function: SendForward
 //  START_GAP = 440;       (55*8) cycles at 125Khz (8us = 1cycle)