Updated tnp3.lua

[proxmark3-svn] / client / proxmark3.c

diff --git a/client/proxmark3.c b/client/proxmark3.c
index 3c7e64516d915c8a0864664a14af03d8ff75ce1e..d2bb2011249f5d04ad3cf9bdf9e9c04be98bb5a5 100644 (file)
--- a/client/proxmark3.c
+++ b/client/proxmark3.c
@@ -48,6 +48,11 @@ void SendCommand(UsbCommand *c) {
       return;
     }
 
+       /**
+       The while-loop below causes hangups at times, when the pm3 unit is unresponsive
+       or disconnected. The main console thread is alive, but comm thread just spins here.
+       Not good.../holiman
+       **/
   while(txcmd_pending);
   txcmd = *c;
   txcmd_pending = true;
@@ -62,21 +67,6 @@ struct main_loop_arg {
   char *script_cmds_file;
 };
 
-//static void *usb_receiver(void *targ) {
-//  struct receiver_arg *arg = (struct receiver_arg*)targ;
-//  UsbCommand cmdbuf;
-//
-//  while (arg->run) {
-//    if (ReceiveCommandPoll(&cmdbuf)) {
-//      UsbCommandReceived(&cmdbuf);
-//      fflush(NULL);
-//    }
-//  }
-//
-//  pthread_exit(NULL);
-//  return NULL;
-//}
-
 byte_t rx[0x1000000];
 byte_t* prx = rx;
 
@@ -207,25 +197,14 @@ static void *main_loop(void *targ) {
   return NULL;
 }
 
-//static void dumpHelp(char  *parent, ...)
-//{
-//  printf("## %s\n\n", parent);
-//  CommandReceived(parent);
-//  
-//  printf("\n");
-//}
-
-static void dumpAllHelp()
+static void dumpAllHelp(int markdown)
 {
-  offline=3;
-  printf("\n# Proxmark3 command dump\n\n");
-  printf("Some commands are available only if a Proxmark is actually connected,\n");
-  printf("Those commands are flagged with \"@\" in front of their description.\n");
+  printf("\n%sProxmark3 command dump%s\n\n",markdown?"# ":"",markdown?"":"\n======================");
+  printf("Some commands are available only if a Proxmark is actually connected.%s\n",markdown?"  ":"");
+  printf("Check column \"offline\" for their availability.\n");
   printf("\n");
   command_t *cmds = getTopLevelCommandTable();
-
-  dumpCommandsRecursive(cmds);
-
+  dumpCommandsRecursive(cmds, markdown);
 }
 
 int main(int argc, char* argv[]) {
@@ -234,17 +213,22 @@ int main(int argc, char* argv[]) {
        if (argc < 2) {
                printf("syntax: %s <port>\n\n",argv[0]);
                printf("\tLinux example:'%s /dev/ttyACM0'\n\n", argv[0]);
-    printf("help:   %s -h\n\n", argv[0]);
-    printf("\tDump all interactive help at once\n");
+               printf("help:   %s -h\n\n", argv[0]);
+               printf("\tDump all interactive help at once\n");
+               printf("markdown:   %s -m\n\n", argv[0]);
+               printf("\tDump all interactive help at once in markdown syntax\n");
                return 1;
        }
-  
-  if (strcmp(argv[1], "-h") == 0) {
-    printf("syntax: %s <port>\n\n",argv[0]);
-    printf("\tLinux example:'%s /dev/ttyACM0'\n\n", argv[0]);
-    dumpAllHelp();
-    return 0;
-  }  
+       if (strcmp(argv[1], "-h") == 0) {
+               printf("syntax: %s <port>\n\n",argv[0]);
+               printf("\tLinux example:'%s /dev/ttyACM0'\n\n", argv[0]);
+               dumpAllHelp(0);
+               return 0;
+       }
+       if (strcmp(argv[1], "-m") == 0) {
+               dumpAllHelp(1);
+               return 0;
+       }
        // Make sure to initialize
        struct main_loop_arg marg = {
                .usb_present = 0,
@@ -252,17 +236,6 @@ int main(int argc, char* argv[]) {
        };
        pthread_t main_loop_t;
 
-/*
-  usb_init();
-  if (!OpenProxmark(1)) {
-    fprintf(stderr,"PROXMARK3: NOT FOUND!\n");
-    marg.usb_present = 0;
-    offline = 1;
-  } else {
-    marg.usb_present = 1;
-    offline = 0;
-  }
-*/
   
        sp = uart_open(argv[1]);
        if (sp == INVALID_SERIAL_PORT) {
@@ -303,10 +276,6 @@ int main(int argc, char* argv[]) {
 
        pthread_join(main_loop_t, NULL);
 
-//  if (marg.usb_present == 1) {
-//    CloseProxmark();
-//  }
-
        // Clean up the port
        uart_close(sp);