FIX: Some uninitialized variables, some syntax suger, and some extra WDT_HIT calls...

[proxmark3-svn] / common / protocols.h

diff --git a/common/protocols.h b/common/protocols.h
index 01b738c2b6076ec1fed19d7d47dd2b2033683442..875b0af0fb3e5343206fb9ae789137e749b8ee92 100644 (file)
--- a/common/protocols.h
+++ b/common/protocols.h
@@ -31,6 +31,9 @@ ISO14443B
        05 = REQB
        1D = ATTRIB
        50 = HALT
        05 = REQB
        1D = ATTRIB
        50 = HALT

+       
+       BA = PING (reader -> tag)
+       AB = PONG (tag -> reader)

 SRIX4K (tag does not respond to 05)
        06 00 = INITIATE
        0E xx = SELECT ID (xx = Chip-ID)
 SRIX4K (tag does not respond to 05)
        06 00 = INITIATE
        0E xx = SELECT ID (xx = Chip-ID)


@@ -88,7 +91,29 @@ NXP/Philips CUSTOM COMMANDS
        BA = Enable Privacy
        BB = 64bit Password Protection
        40 = Long Range CMD (Standard ISO/TR7003:1990)
        BA = Enable Privacy
        BB = 64bit Password Protection
        40 = Long Range CMD (Standard ISO/TR7003:1990)

-               */
+
+ISO 7816-4 Basic interindustry commands. For command APDU's.
+       B0 = READ BINARY
+       D0 = WRITE BINARY
+       D6 = UPDATE BINARY
+       0E = ERASE BINARY
+       B2 = READ RECORDS
+       D2 = WRITE RECORDS
+       E2 = APPEND RECORD
+       DC = UPDATE RECORD
+       CA = GET DATA
+       DA = PUT DATA
+       A4 = SELECT FILE
+       20 = VERIFY
+       88 = INTERNAL AUTHENTICATION
+       82 = EXTERNAL AUTHENTICATION
+       B4 = GET CHALLENGE
+       70 = MANAGE CHANNEL
+
+       For response APDU's
+       90 00 = OK
+       6x xx = ERROR
+*/

 
 #define ICLASS_CMD_ACTALL           0x0A
 #define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
 
 #define ICLASS_CMD_ACTALL           0x0A
 #define ICLASS_CMD_READ_OR_IDENTIFY 0x0C


@@ -109,7 +134,7 @@ NXP/Philips CUSTOM COMMANDS
 #define ISO14443A_CMD_WUPA       0x52
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT     0x93
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2   0x95
 #define ISO14443A_CMD_WUPA       0x52
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT     0x93
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2   0x95

-#define ISO14443A_CMD_WRITEBLOCK 0xA0 // or 0xA2 ?
+#define ISO14443A_CMD_WRITEBLOCK 0xA0

 #define ISO14443A_CMD_HALT       0x50
 #define ISO14443A_CMD_RATS       0xE0
 
 #define ISO14443A_CMD_HALT       0x50
 #define ISO14443A_CMD_RATS       0xE0
 


@@ -123,9 +148,40 @@ NXP/Philips CUSTOM COMMANDS
 #define MIFARE_CMD_RESTORE      0xC2
 #define MIFARE_CMD_TRANSFER     0xB0
 
 #define MIFARE_CMD_RESTORE      0xC2
 #define MIFARE_CMD_TRANSFER     0xB0
 

-#define MIFARE_ULC_WRITE        0xA0
+#define MIFARE_EV1_PERSONAL_UID 0x40
+#define MIFARE_EV1_SETMODE             0x43
+
+
+#define MIFARE_ULC_WRITE        0xA2
+//#define MIFARE_ULC__COMP_WRITE  0xA0

 #define MIFARE_ULC_AUTH_1       0x1A
 #define MIFARE_ULC_AUTH_1       0x1A

-#define MIFARE_ULC_AUTH_2        0xAF
+#define MIFARE_ULC_AUTH_2       0xAF
+
+#define MIFARE_ULEV1_AUTH              0x1B
+#define MIFARE_ULEV1_VERSION   0x60
+#define MIFARE_ULEV1_FASTREAD  0x3A
+#define MIFARE_ULEV1_READ_CNT  0x39
+#define MIFARE_ULEV1_INCR_CNT  0xA5
+#define MIFARE_ULEV1_READSIG   0x3C
+#define MIFARE_ULEV1_CHECKTEAR 0x3E
+#define MIFARE_ULEV1_VCSL              0x4B
+
+
+// Magic Generation 1, parameter "work flags"
+// bit 0 - need get UID
+// bit 1 - send wupC (wakeup chinese)
+// bit 2 - send HALT cmd after sequence
+// bit 3 - turn on FPGA
+// bit 4 - turn off FPGA
+// bit 5 - set datain instead of issuing USB reply (called via ARM for StandAloneMode14a)
+#define MAGIC_UID                      0x01
+#define MAGIC_WUPC                     0x02
+#define MAGIC_HALT                     0x04
+#define MAGIC_INIT                     0x08
+#define MAGIC_OFF                      0x10
+#define MAGIC_DATAIN           0x20
+#define MAGIC_WIPE                     0x40
+#define MAGIC_SINGLE           (MAGIC_WUPC | MAGIC_HALT | MAGIC_INIT | MAGIC_OFF) //0x1E

 
 /**
 06 00 = INITIATE
 
 /**
 06 00 = INITIATE


@@ -149,6 +205,8 @@ NXP/Philips CUSTOM COMMANDS
 #define ISO14443B_RESET        0x0C
 #define ISO14443B_COMPLETION   0x0F
 #define ISO14443B_AUTHENTICATE 0x0A
 #define ISO14443B_RESET        0x0C
 #define ISO14443B_COMPLETION   0x0F
 #define ISO14443B_AUTHENTICATE 0x0A

+#define ISO14443B_PING            0xBA
+#define ISO14443B_PONG            0xAB

 
 //First byte is 26
 #define ISO15693_INVENTORY     0x01
 
 //First byte is 26
 #define ISO15693_INVENTORY     0x01


@@ -168,9 +226,26 @@ NXP/Philips CUSTOM COMMANDS
 #define ISO15693_READ_MULTI_SECSTATUS 0x2C
 
 
 #define ISO15693_READ_MULTI_SECSTATUS 0x2C
 
 

-#define ISO_14443A 0
-#define ICLASS     1
-#define ISO_14443B 2
+// Topaz command set:
+#define        TOPAZ_REQA                                              0x26    // Request
+#define        TOPAZ_WUPA                                              0x52    // WakeUp
+#define        TOPAZ_RID                                               0x78    // Read ID
+#define        TOPAZ_RALL                                              0x00    // Read All (all bytes)
+#define        TOPAZ_READ                                              0x01    // Read (a single byte)
+#define        TOPAZ_WRITE_E                                   0x53    // Write-with-erase (a single byte)
+#define        TOPAZ_WRITE_NE                                  0x1a    // Write-no-erase (a single byte)
+// additional commands for Dynamic Memory Model
+#define TOPAZ_RSEG                                             0x10    // Read segment
+#define TOPAZ_READ8                                            0x02    // Read (eight bytes)
+#define TOPAZ_WRITE_E8                                 0x54    // Write-with-erase (eight bytes)
+#define TOPAZ_WRITE_NE8                                        0x1B    // Write-no-erase (eight bytes)
+
+
+#define ISO_14443A     0
+#define ICLASS         1
+#define ISO_14443B     2
+#define TOPAZ          3
+#define ISO_7816_4  4

 
 //-- Picopass fuses
 #define FUSE_FPERS   0x80
 
 //-- Picopass fuses
 #define FUSE_FPERS   0x80


@@ -182,7 +257,82 @@ NXP/Philips CUSTOM COMMANDS
 #define FUSE_FPROD0  0x02
 #define FUSE_RA      0x01
 
 #define FUSE_FPROD0  0x02
 #define FUSE_RA      0x01
 

+// ISO 7816-4 Basic interindustry commands. For command APDU's.
+#define ISO7816_READ_BINARY 0xB0
+#define ISO7816_WRITE_BINARY 0xD0
+#define ISO7816_UPDATE_BINARY 0xD6
+#define ISO7816_ERASE_BINARY 0x0E
+#define ISO7816_READ_RECORDS 0xB2
+#define ISO7816_WRITE_RECORDS 0xD2
+#define ISO7816_APPEND_RECORD 0xE2
+#define ISO7816_UPDATE_RECORD 0xDC
+#define ISO7816_GET_DATA 0xCA
+#define ISO7816_PUT_DATA 0xDA
+#define ISO7816_SELECT_FILE 0xA4
+#define ISO7816_VERIFY 0x20
+#define ISO7816_INTERNAL_AUTHENTICATION 0x88
+#define ISO7816_EXTERNAL_AUTHENTICATION 0x82
+#define ISO7816_GET_CHALLENGE 0xB4
+#define ISO7816_MANAGE_CHANNEL 0x70

 
 

+// ISO7816-4   For response APDU's
+#define ISO7816_OK     0x9000
+//     6x xx = ERROR
+       

 void printIclassDumpInfo(uint8_t* iclass_dump);
 void printIclassDumpInfo(uint8_t* iclass_dump);

+void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);
+
+/* T55x7 configuration register definitions */
+#define T55x7_POR_DELAY                                0x00000001
+#define T55x7_ST_TERMINATOR                    0x00000008
+#define T55x7_PWD                                      0x00000010
+#define T55x7_MAXBLOCK_SHIFT           5
+#define T55x7_AOR                                      0x00000200
+#define T55x7_PSKCF_RF_2                       0
+#define T55x7_PSKCF_RF_4                       0x00000400
+#define T55x7_PSKCF_RF_8                       0x00000800
+#define T55x7_MODULATION_DIRECT                0
+#define T55x7_MODULATION_PSK1          0x00001000
+#define T55x7_MODULATION_PSK2          0x00002000
+#define T55x7_MODULATION_PSK3          0x00003000
+#define T55x7_MODULATION_FSK1          0x00004000
+#define T55x7_MODULATION_FSK2          0x00005000
+#define T55x7_MODULATION_FSK1a         0x00006000
+#define T55x7_MODULATION_FSK2a         0x00007000
+#define T55x7_MODULATION_MANCHESTER    0x00008000
+#define T55x7_MODULATION_BIPHASE       0x00010000
+#define T55x7_MODULATION_DIPHASE       0x00018000
+#define T55x7_BITRATE_RF_8                     0
+#define T55x7_BITRATE_RF_16                    0x00040000
+#define T55x7_BITRATE_RF_32                    0x00080000
+#define T55x7_BITRATE_RF_40                    0x000C0000
+#define T55x7_BITRATE_RF_50                    0x00100000
+#define T55x7_BITRATE_RF_64                    0x00140000
+#define T55x7_BITRATE_RF_100           0x00180000
+#define T55x7_BITRATE_RF_128           0x001C0000
+
+/* T5555 (Q5) configuration register definitions */
+#define T5555_ST_TERMINATOR                    0x00000001
+#define T5555_MAXBLOCK_SHIFT           0x00000001
+#define T5555_MODULATION_MANCHESTER    0
+#define T5555_MODULATION_PSK1          0x00000010
+#define T5555_MODULATION_PSK2          0x00000020
+#define T5555_MODULATION_PSK3          0x00000030
+#define T5555_MODULATION_FSK1          0x00000040
+#define T5555_MODULATION_FSK2          0x00000050
+#define T5555_MODULATION_BIPHASE       0x00000060
+#define T5555_MODULATION_DIRECT                0x00000070
+#define T5555_INVERT_OUTPUT                    0x00000080
+#define T5555_PSK_RF_2                         0
+#define T5555_PSK_RF_4                         0x00000100
+#define T5555_PSK_RF_8                         0x00000200
+#define T5555_USE_PWD                          0x00000400
+#define T5555_USE_AOR                          0x00000800
+#define T5555_BITRATE_SHIFT         12 //(RF=2n+2)   ie 64=2*0x1F+2   or n = (RF-2)/2
+#define T5555_FAST_WRITE                       0x00004000
+#define T5555_PAGE_SELECT                      0x00008000
+
+uint32_t GetT55xxClockBit(uint32_t clock);

 
 

-#endif // PROTOCOLS_H
+#endif 
+// PROTOCOLS_H