CHG: revert legiccrc8 to old algo.

[proxmark3-svn] / armsrc / iclass.c

diff --git a/armsrc/iclass.c b/armsrc/iclass.c
index 2dff8a4e7246d4cef8cee4c0ee589ae50c1abd11..42deea86040145dcf3b82d5b7e1a9722b551da3d 100644 (file)
--- a/armsrc/iclass.c
+++ b/armsrc/iclass.c
@@ -633,8 +633,6 @@ static RAMFUNC int ManchesterDecoding(int v)
 //-----------------------------------------------------------------------------
 void RAMFUNC SnoopIClass(void)
 {
 //-----------------------------------------------------------------------------
 void RAMFUNC SnoopIClass(void)
 {

-
-

     // We won't start recording the frames that we acquire until we trigger;
     // a good trigger condition to get started is probably when we see a
     // response from the tag.
     // We won't start recording the frames that we acquire until we trigger;
     // a good trigger condition to get started is probably when we see a
     // response from the tag.


@@ -655,8 +653,9 @@ void RAMFUNC SnoopIClass(void)
     // The DMA buffer, used to stream samples from the FPGA
     uint8_t *dmaBuf = BigBuf_malloc(DMA_BUFFER_SIZE);
  
     // The DMA buffer, used to stream samples from the FPGA
     uint8_t *dmaBuf = BigBuf_malloc(DMA_BUFFER_SIZE);
  

-       set_tracing(TRUE);

        clear_trace();
        clear_trace();

+       set_tracing(TRUE);
+       

     iso14a_set_trigger(FALSE);
 
     int lastRxCounter;
     iso14a_set_trigger(FALSE);
 
     int lastRxCounter;


@@ -678,7 +677,11 @@ void RAMFUNC SnoopIClass(void)
     FpgaSetupSsc();
     upTo = dmaBuf;
     lastRxCounter = DMA_BUFFER_SIZE;
     FpgaSetupSsc();
     upTo = dmaBuf;
     lastRxCounter = DMA_BUFFER_SIZE;

-    FpgaSetupSscDma((uint8_t *)dmaBuf, DMA_BUFFER_SIZE);
+       // Setup and start DMA.
+       if ( !FpgaSetupSscDma((uint8_t*) dmaBuf, DMA_BUFFER_SIZE) ){
+               if (MF_DBGLEVEL > 1) Dbprintf("FpgaSetupSscDma failed. Exiting"); 
+               return;
+       }

 
     // And the reader -> tag commands
     memset(&Uart, 0, sizeof(Uart));
 
     // And the reader -> tag commands
     memset(&Uart, 0, sizeof(Uart));


@@ -705,22 +708,22 @@ void RAMFUNC SnoopIClass(void)
     for(;;) {
         LED_A_ON();
         WDT_HIT();
     for(;;) {
         LED_A_ON();
         WDT_HIT();

-        int behindBy = (lastRxCounter - AT91C_BASE_PDC_SSC->PDC_RCR) &
-                                (DMA_BUFFER_SIZE-1);
-        if(behindBy > maxBehindBy) {
+        int behindBy = (lastRxCounter - AT91C_BASE_PDC_SSC->PDC_RCR) & (DMA_BUFFER_SIZE-1);
+
+        if ( behindBy > maxBehindBy) {

             maxBehindBy = behindBy;
             maxBehindBy = behindBy;

-            if(behindBy > (9 * DMA_BUFFER_SIZE / 10)) {
+            if ( behindBy > (9 * DMA_BUFFER_SIZE / 10)) {

                 Dbprintf("blew circular buffer! behindBy=0x%x", behindBy);
                 goto done;
             }
         }
                 Dbprintf("blew circular buffer! behindBy=0x%x", behindBy);
                 goto done;
             }
         }

-        if(behindBy < 1) continue;
+        if( behindBy < 1) continue;

 
 

-       LED_A_OFF();
+               LED_A_OFF();

         smpl = upTo[0];
         upTo++;
         lastRxCounter -= 1;
         smpl = upTo[0];
         upTo++;
         lastRxCounter -= 1;

-        if(upTo - dmaBuf > DMA_BUFFER_SIZE) {
+        if (upTo - dmaBuf > DMA_BUFFER_SIZE) {

             upTo -= DMA_BUFFER_SIZE;
             lastRxCounter += DMA_BUFFER_SIZE;
             AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) upTo;
             upTo -= DMA_BUFFER_SIZE;
             lastRxCounter += DMA_BUFFER_SIZE;
             AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) upTo;


@@ -728,77 +731,75 @@ void RAMFUNC SnoopIClass(void)
         }
 
         //samples += 4;
         }
 
         //samples += 4;

-       samples += 1;
+               samples += 1;

 
 

-       if(smpl & 0xF) {
-               decbyte ^= (1 << (3 - div));
-       }
+               if(smpl & 0xF)
+                       decbyte ^= (1 << (3 - div));
+       

        
        

-       // FOR READER SIDE COMMUMICATION...
+               // FOR READER SIDE COMMUMICATION...

 
 

-       decbyter <<= 2;
-       decbyter ^= (smpl & 0x30);
+               decbyter <<= 2;
+               decbyter ^= (smpl & 0x30);

 
 

-       div++;
+               ++div;

        
        

-       if((div + 1) % 2 == 0) {
-               smpl = decbyter;        
-               if(OutOfNDecoding((smpl & 0xF0) >> 4)) {
-                   rsamples = samples - Uart.samples;
-                       time_stop = (GetCountSspClk()-time_0) << 4;
-                   LED_C_ON();
-
-                       //if(!LogTrace(Uart.output,Uart.byteCnt, rsamples, Uart.parityBits,TRUE)) break;
-                       //if(!LogTrace(NULL, 0, Uart.endTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER, 0, TRUE)) break;
-                       if(tracing)     {
-                               uint8_t parity[MAX_PARITY_SIZE];
-                               GetParity(Uart.output, Uart.byteCnt, parity);
-                               LogTrace(Uart.output,Uart.byteCnt, time_start, time_stop, parity, TRUE);
-                       }
-
+               if (( div + 1) % 2 == 0) {
+                       smpl = decbyter;        
+                       if ( OutOfNDecoding((smpl & 0xF0) >> 4)) {
+                               rsamples = samples - Uart.samples;
+                               time_stop = (GetCountSspClk()-time_0) << 4;
+                               LED_C_ON();
+
+                               //if(!LogTrace(Uart.output,Uart.byteCnt, rsamples, Uart.parityBits,TRUE)) break;
+                               //if(!LogTrace(NULL, 0, Uart.endTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER, 0, TRUE)) break;
+                               if(tracing)     {
+                                       uint8_t parity[MAX_PARITY_SIZE];
+                                       GetParity(Uart.output, Uart.byteCnt, parity);
+                                       LogTrace(Uart.output,Uart.byteCnt, time_start, time_stop, parity, TRUE);
+                               }

 
 

-                       /* And ready to receive another command. */
-                   Uart.state = STATE_UNSYNCD;
-                   /* And also reset the demod code, which might have been */
-                   /* false-triggered by the commands from the reader. */
-                   Demod.state = DEMOD_UNSYNCD;
-                   LED_B_OFF();
-                   Uart.byteCnt = 0;
-               }else{
-                       time_start = (GetCountSspClk()-time_0) << 4;
+                               /* And ready to receive another command. */
+                               Uart.state = STATE_UNSYNCD;
+                               /* And also reset the demod code, which might have been */
+                               /* false-triggered by the commands from the reader. */
+                               Demod.state = DEMOD_UNSYNCD;
+                               LED_B_OFF();
+                               Uart.byteCnt = 0;
+                       } else {
+                               time_start = (GetCountSspClk()-time_0) << 4;
+                       }
+                       decbyter = 0;

                }
                }

-               decbyter = 0;
-       }

 
 

-       if(div > 3) {
-               smpl = decbyte;
-               if(ManchesterDecoding(smpl & 0x0F)) {
-                       time_stop = (GetCountSspClk()-time_0) << 4;
+               if(div > 3) {
+                       smpl = decbyte;
+                       if(ManchesterDecoding(smpl & 0x0F)) {
+                               time_stop = (GetCountSspClk()-time_0) << 4;

 
 

-                   rsamples = samples - Demod.samples;
-                   LED_B_ON();
+                               rsamples = samples - Demod.samples;
+                               LED_B_ON();

 
 

-                       if(tracing)     {
-                               uint8_t parity[MAX_PARITY_SIZE];
-                               GetParity(Demod.output, Demod.len, parity);
-                               LogTrace(Demod.output, Demod.len, time_start, time_stop, parity, FALSE);
-                       }
+                               if(tracing)     {
+                                       uint8_t parity[MAX_PARITY_SIZE];
+                                       GetParity(Demod.output, Demod.len, parity);
+                                       LogTrace(Demod.output, Demod.len, time_start, time_stop, parity, FALSE);
+                               }

 
 

-                   // And ready to receive another response.
-                   memset(&Demod, 0, sizeof(Demod));
-                       Demod.output = tagToReaderResponse;
-                   Demod.state = DEMOD_UNSYNCD;
-                   LED_C_OFF();
-               }else{
-                       time_start = (GetCountSspClk()-time_0) << 4;
+                               // And ready to receive another response.
+                               memset(&Demod, 0, sizeof(Demod));
+                               Demod.output = tagToReaderResponse;
+                               Demod.state = DEMOD_UNSYNCD;
+                               LED_C_OFF();
+                       } else {
+                               time_start = (GetCountSspClk()-time_0) << 4;
+                       }
+                       
+                       div = 0;
+                       decbyte = 0x00;

                }
                }

-               
-               div = 0;
-               decbyte = 0x00;
-       }
-       //}

 
 

-        if(BUTTON_PRESS()) {
+        if (BUTTON_PRESS()) {

             DbpString("cancelled_a");
             goto done;
         }
             DbpString("cancelled_a");
             goto done;
         }


@@ -810,21 +811,17 @@ void RAMFUNC SnoopIClass(void)
        Dbprintf("%x %x %x", Uart.byteCntMax, BigBuf_get_traceLen(), (int)Uart.output[0]);
 
 done:
        Dbprintf("%x %x %x", Uart.byteCntMax, BigBuf_get_traceLen(), (int)Uart.output[0]);
 
 done:

-    AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;
+    FpgaDisableSscDma();

     Dbprintf("%x %x %x", maxBehindBy, Uart.state, Uart.byteCnt);
        Dbprintf("%x %x %x", Uart.byteCntMax, BigBuf_get_traceLen(), (int)Uart.output[0]);
     Dbprintf("%x %x %x", maxBehindBy, Uart.state, Uart.byteCnt);
        Dbprintf("%x %x %x", Uart.byteCntMax, BigBuf_get_traceLen(), (int)Uart.output[0]);

-    LED_A_OFF();
-    LED_B_OFF();
-    LED_C_OFF();
-    LED_D_OFF();
+       LEDsoff();

        set_tracing(FALSE);     
 }
 
 void rotateCSN(uint8_t* originalCSN, uint8_t* rotatedCSN) {
        int i; 
        set_tracing(FALSE);     
 }
 
 void rotateCSN(uint8_t* originalCSN, uint8_t* rotatedCSN) {
        int i; 

-       for(i = 0; i < 8; i++) {
+       for(i = 0; i < 8; i++)

                rotatedCSN[i] = (originalCSN[i] >> 3) | (originalCSN[(i+1)%8] << 5);
                rotatedCSN[i] = (originalCSN[i] >> 3) | (originalCSN[(i+1)%8] << 5);

-       }

 }
 
 //-----------------------------------------------------------------------------
 }
 
 //-----------------------------------------------------------------------------


@@ -926,7 +923,7 @@ static void CodeIClassTagAnswer(const uint8_t *cmd, int len)
         * The mode FPGA_HF_SIMULATOR_MODULATE_424K_8BIT which we use to simulate tag,
         * works like this.
         * - A 1-bit input to the FPGA becomes 8 pulses on 423.5kHz (fc/32) (18.88us).
         * The mode FPGA_HF_SIMULATOR_MODULATE_424K_8BIT which we use to simulate tag,
         * works like this.
         * - A 1-bit input to the FPGA becomes 8 pulses on 423.5kHz (fc/32) (18.88us).

-        * - A 0-bit inptu to the FPGA becomes an unmodulated time of 18.88us
+        * - A 0-bit input to the FPGA becomes an unmodulated time of 18.88us

         *
         * In this mode the SOF can be written as 00011101 = 0x1D
         * The EOF can be written as 10111000 = 0xb8
         *
         * In this mode the SOF can be written as 00011101 = 0x1D
         * The EOF can be written as 10111000 = 0xb8


@@ -993,8 +990,9 @@ void SimulateIClass(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 
        // Enable and clear the trace
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 
        // Enable and clear the trace

-       set_tracing(TRUE);

        clear_trace();
        clear_trace();

+       set_tracing(TRUE);
+

        //Use the emulator memory for SIM
        uint8_t *emulator = BigBuf_get_EM_addr();
 
        //Use the emulator memory for SIM
        uint8_t *emulator = BigBuf_get_EM_addr();
 


@@ -1302,7 +1300,8 @@ int doIClassSimulation( int simulationMode, uint8_t *reader_mac_buf)
                        receivedCmd[3], receivedCmd[4], receivedCmd[5],
                        receivedCmd[6], receivedCmd[7], receivedCmd[8]);
                        // Do not respond
                        receivedCmd[3], receivedCmd[4], receivedCmd[5],
                        receivedCmd[6], receivedCmd[7], receivedCmd[8]);
                        // Do not respond

-                       modulated_response = resp_sof; modulated_response_size = 0; //order = 0;
+                       modulated_response = resp_sof;
+                       modulated_response_size = 0; //order = 0;

                        trace_data = NULL;
                        trace_data_size = 0;
                }
                        trace_data = NULL;
                        trace_data_size = 0;
                }


@@ -1331,23 +1330,17 @@ int doIClassSimulation( int simulationMode, uint8_t *reader_mac_buf)
                                GetParity(trace_data, trace_data_size, parity);
                                LogTrace(trace_data, trace_data_size, (t2r_time-time_0) << 4, (t2r_time-time_0) << 4, parity, FALSE);
                        }
                                GetParity(trace_data, trace_data_size, parity);
                                LogTrace(trace_data, trace_data_size, (t2r_time-time_0) << 4, (t2r_time-time_0) << 4, parity, FALSE);
                        }

-                       if(!tracing) {
+                       if(!tracing)

                                DbpString("Trace full");
                                DbpString("Trace full");

-                               //break;
-                       }

 
                }
        }
 
 
                }
        }
 

-       //Dbprintf("%x", cmdsRecvd);
-       LED_A_OFF();
-       LED_B_OFF();
-       LED_C_OFF();
-
+       LEDsoff();
+       

        if(buttonPressed)
        if(buttonPressed)

-       {

                DbpString("Button pressed");
                DbpString("Button pressed");

-       }
+       

        return buttonPressed;
 }
 
        return buttonPressed;
 }
 


@@ -1395,63 +1388,62 @@ static int SendIClassAnswer(uint8_t *resp, int respLen, int delay)
 //-----------------------------------------------------------------------------
 static void TransmitIClassCommand(const uint8_t *cmd, int len, int *samples, int *wait)
 {
 //-----------------------------------------------------------------------------
 static void TransmitIClassCommand(const uint8_t *cmd, int len, int *samples, int *wait)
 {

-  int c;
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
-  AT91C_BASE_SSC->SSC_THR = 0x00;
-  FpgaSetupSsc();
-
-   if (wait)
-   {
-     if(*wait < 10) *wait = 10;
-     
-  for(c = 0; c < *wait;) {
-    if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
-      AT91C_BASE_SSC->SSC_THR = 0x00;          // For exact timing!
-      c++;
-    }
-    if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
-      volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR;
-      (void)r;
-    }
-    WDT_HIT();
-  }
+       int c;
+       volatile uint32_t r;
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
+       AT91C_BASE_SSC->SSC_THR = 0x00;
+       FpgaSetupSsc();

 
 

-   }
+       if (wait) {
+               if(*wait < 10) *wait = 10;

 
 

+               for(c = 0; c < *wait;) {
+                       if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
+                               AT91C_BASE_SSC->SSC_THR = 0x00;         // For exact timing!
+                               c++;
+                       }
+                       if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
+                               r = AT91C_BASE_SSC->SSC_RHR;
+                               (void)r;
+                       }
+                       WDT_HIT();
+               }
+       }

 
 

-  uint8_t sendbyte;
-  bool firstpart = TRUE;
-  c = 0;
-  for(;;) {
-    if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {

 
 

-      // DOUBLE THE SAMPLES!
-      if(firstpart) {
-       sendbyte = (cmd[c] & 0xf0) | (cmd[c] >> 4); 
-      }
-      else {
-       sendbyte = (cmd[c] & 0x0f) | (cmd[c] << 4);
-        c++;
-      }
-      if(sendbyte == 0xff) {
-       sendbyte = 0xfe;
-      }
-      AT91C_BASE_SSC->SSC_THR = sendbyte;
-      firstpart = !firstpart;
+       uint8_t sendbyte;
+       bool firstpart = TRUE;
+       c = 0;
+       for(;;) {
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {

 
 

-      if(c >= len) {
-        break;
-      }
-    }
-    if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
-      volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR;
-      (void)r;
-    }
-    WDT_HIT();
-  }
-  if (samples) *samples = (c + *wait) << 3;
-}
+                       // DOUBLE THE SAMPLES!
+                       if(firstpart) {
+                               sendbyte = (cmd[c] & 0xf0) | (cmd[c] >> 4); 
+                       }
+                       else {
+                               sendbyte = (cmd[c] & 0x0f) | (cmd[c] << 4);
+                               c++;
+                       }
+
+                       if(sendbyte == 0xff)
+                               sendbyte = 0xfe;

 
 

+                       AT91C_BASE_SSC->SSC_THR = sendbyte;
+                       firstpart = !firstpart;
+
+                       if(c >= len) break;
+
+               }
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
+                       r = AT91C_BASE_SSC->SSC_RHR;
+                       (void)r;
+               }
+               
+               WDT_HIT();
+       }
+       if (samples && wait) *samples = (c + *wait) << 3;
+}

 
 //-----------------------------------------------------------------------------
 // Prepare iClass reader command to send to FPGA
 
 //-----------------------------------------------------------------------------
 // Prepare iClass reader command to send to FPGA


@@ -1551,9 +1543,15 @@ static int GetIClassAnswer(uint8_t *receivedResponse, int maxLen, int *samples,
                        if (elapsed) (*elapsed)++;
                }
                if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
                        if (elapsed) (*elapsed)++;
                }
                if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {

-                       if(c < timeout) { c++; } else { return FALSE; }
+                       if(c < timeout)
+                               c++;
+                       else 
+                               return FALSE;
+                       

                        b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
                        b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;

+                       

                        skip = !skip;
                        skip = !skip;

+                       

                        if(skip) continue;
                
                        if(ManchesterDecoding(b & 0x0f)) {
                        if(skip) continue;
                
                        if(ManchesterDecoding(b & 0x0f)) {


@@ -1582,9 +1580,9 @@ void setupIclassReader()
 {
     FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
     // Reset trace buffer
 {
     FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
     // Reset trace buffer

-       set_tracing(TRUE);

        clear_trace();
        clear_trace();

-
+       set_tracing(TRUE);
+       

     // Setup SSC
     FpgaSetupSsc();
     // Start from off (no field generated)
     // Setup SSC
     FpgaSetupSsc();
     // Start from off (no field generated)


@@ -1705,7 +1703,9 @@ void ReaderIClass(uint8_t arg0) {
     while(!BUTTON_PRESS())
     {
                if (try_once && tryCnt > 5) break; 
     while(!BUTTON_PRESS())
     {
                if (try_once && tryCnt > 5) break; 

+               

                tryCnt++;
                tryCnt++;

+               

                if(!tracing) {
                        DbpString("Trace full");
                        break;
                if(!tracing) {
                        DbpString("Trace full");
                        break;