output ssp_frame, ssp_din, ssp_clk;
output dbg;
input [1:0] subcarrier_frequency;
- input [2:0] minor_mode;
+ input [3:0] minor_mode;
assign adc_clk = ck_1356meg; // sample frequency is 13,56 MHz
// These are the correlators: we correlate against in-phase and quadrature
// versions of our reference signal, and keep the (signed) results or the
// resulting amplitude to send out later over the SSP.
- if(corr_i_cnt == 6'd0)
+ if (corr_i_cnt == 6'd0)
begin
if (minor_mode == `FPGA_HF_READER_MODE_SNIFF_AMPLITUDE)
begin
end
// for each Q/I pair report two reader signal samples when sniffing. Store the 2nd.
- if(corr_i_cnt == 6'd32)
+ if (corr_i_cnt == 6'd32)
after_hysteresis_prev <= after_hysteresis;
// Then the result from last time is serialized and send out to the ARM.
// ssp_clk should be the adc_clk divided by 64/16 = 4.
// ssp_clk frequency = 13,56MHz / 4 = 3.39MHz
- if(corr_i_cnt[1:0] == 2'b00)
+ if (corr_i_cnt[1:0] == 2'b00)
begin
// Don't shift if we just loaded new data, obviously.
- if(corr_i_cnt != 6'd0)
+ if (corr_i_cnt != 6'd0)
begin
corr_i_out[7:0] <= {corr_i_out[6:0], corr_q_out[7]};
corr_q_out[7:1] <= corr_q_out[6:0];
// set ssp_frame signal for corr_i_cnt = 1..3
// (send one frame with 16 Bits)
- if (corr_i_cnt == 6'd2)
+ if (corr_i_cnt == 6'd1)
ssp_frame <= 1'b1;
- if (corr_i_cnt == 6'd14)
+ if (corr_i_cnt == 6'd5)
ssp_frame <= 1'b0;
end
assign ssp_din = corr_i_out[7];
+// a jamming signal
+reg jam_signal;
+reg [3:0] jam_counter;
+
+always @(negedge adc_clk)
+begin
+ if (corr_i_cnt == 6'd0)
+ begin
+ jam_counter <= jam_counter + 1;
+ jam_signal <= jam_counter[1] ^ jam_counter[3];
+ end
+end
+
// Antenna drivers
reg pwr_hi, pwr_oe4;
pwr_hi = ck_1356meg & ~ssp_dout;
pwr_oe4 = 1'b0;
end
+ else if (minor_mode == `FPGA_HF_READER_MODE_SEND_JAM)
+ begin
+ pwr_hi = ck_1356meg & jam_signal;
+ pwr_oe4 = 1'b0;
+ end
else if (minor_mode == `FPGA_HF_READER_MODE_SNIFF_IQ
|| minor_mode == `FPGA_HF_READER_MODE_SNIFF_AMPLITUDE
|| minor_mode == `FPGA_HF_READER_MODE_SNIFF_PHASE)
- begin
+ begin // all off
pwr_hi = 1'b0;
pwr_oe4 = 1'b0;
end
pwr_hi = ck_1356meg;
pwr_oe4 = 1'b0;
end
-end
+end
// always on
assign pwr_oe1 = 1'b0;