*/\r
\r
#include "usb_cdc.h"\r
+#include "at91sam7s512.h"\r
#include "config_gpio.h"\r
\r
-#define MIN(a, b) (((a) < (b)) ? (a) : (b))\r
-#define MAX(a, b) (((a) > (b)) ? (a) : (b))\r
+\r
+#define AT91C_EP_CONTROL 0\r
#define AT91C_EP_IN_SIZE 0x40\r
#define AT91C_EP_OUT 1\r
#define AT91C_EP_OUT_SIZE 0x40\r
#define AT91C_EP_IN 2\r
\r
-const char devDescriptor[] = {\r
+static const char devDescriptor[] = {\r
/* Device descriptor */\r
0x12, // bLength\r
0x01, // bDescriptorType\r
- 0x10,0x01, // Complies with USB Spec. Release (0110h = release 1.10)\r
+ 0x00,0x02, // Complies with USB Spec. Release (0200h = release 2.0)\r
0x02, // bDeviceClass: CDC class code\r
0x00, // bDeviceSubclass: CDC class sub code\r
0x00, // bDeviceProtocol: CDC Device protocol\r
0x08, // bMaxPacketSize0\r
- 0x2d,0x2d, // Vendor ID (--)\r
- 0x4d,0x50, // Product ID (PM), transmitted in reverse\r
+ 0xc4,0x9a, // Vendor ID (0x9ac4 = J. Westhues)\r
+ 0x8f,0x4b, // Product ID (0x4b8f = Proxmark-3 RFID Instrument)\r
0x01,0x00, // Device release number (0001)\r
- 0x01, // iManufacturer // 0x01\r
- 0x00, // iProduct\r
- 0x00, // SerialNumber\r
+ 0x01, // iManufacturer\r
+ 0x02, // iProduct\r
+ 0x00, // iSerialNumber\r
0x01 // bNumConfigs\r
};\r
\r
-const char cfgDescriptor[] = {\r
+static const char cfgDescriptor[] = {\r
/* ============== CONFIGURATION 1 =========== */\r
/* Configuration 1 descriptor */\r
0x09, // CbLength\r
0x01, // CbConfigurationValue\r
0x00, // CiConfiguration\r
0xC0, // CbmAttributes 0xA0\r
- 0x00, // CMaxPower\r
+ 0xFA, // CMaxPower\r
\r
/* Communication Class Interface Descriptor Requirement */\r
0x09, // bLength\r
0x01, // bNumEndpoints\r
0x02, // bInterfaceClass\r
0x02, // bInterfaceSubclass\r
- 0x00, // bInterfaceProtocol\r
+ 0x01, // bInterfaceProtocol\r
0x00, // iInterface\r
\r
/* Header Functional Descriptor */\r
0x04, // bFunctionLength\r
0x24, // bDescriptor Type: CS_INTERFACE\r
0x02, // bDescriptor Subtype: ACM Func Desc\r
- 0x00, // bmCapabilities\r
+ 0x02, // bmCapabilities\r
\r
/* Union Functional Descriptor */\r
0x05, // bFunctionLength\r
0x00 // bInterval\r
};\r
\r
-const char strDescriptor[] = {\r
- 26, // Length\r
+static const char StrDescLanguageCodes[] = {\r
+ 4, // Length\r
+ 0x03, // Type is string\r
+ 0x09, 0x04 // supported language Code 0 = 0x0409 (English)\r
+};\r
+ \r
+static const char StrDescManufacturer[] = {\r
+ 26, // Length\r
0x03, // Type is string\r
'p', 0x00,\r
'r', 0x00,\r
'.', 0x00,\r
'o', 0x00,\r
'r', 0x00,\r
- 'g', 0x00,\r
+ 'g', 0x00\r
};\r
\r
+static const char StrDescProduct[] = {\r
+ 8, // Length\r
+ 0x03, // Type is string\r
+ 'P', 0x00,\r
+ 'M', 0x00,\r
+ '3', 0x00\r
+};\r
+ \r
+static const char* const pStrings[] =\r
+{\r
+ StrDescLanguageCodes,\r
+ StrDescManufacturer,\r
+ StrDescProduct\r
+};\r
\r
-/* USB standard request code */\r
+const char* getStringDescriptor(uint8_t idx)\r
+{\r
+ if(idx >= (sizeof(pStrings) / sizeof(pStrings[0]))) {\r
+ return(NULL);\r
+ } else {\r
+ return(pStrings[idx]);\r
+ }\r
+}\r
+\r
+// Bitmap for all status bits in CSR which must be written as 1 to cause no effect\r
+#define REG_NO_EFFECT_1_ALL AT91C_UDP_RX_DATA_BK0 | AT91C_UDP_RX_DATA_BK1 \\r
+ |AT91C_UDP_STALLSENT | AT91C_UDP_RXSETUP \\r
+ |AT91C_UDP_TXCOMP\r
+\r
+// Clear flags in the UDP_CSR register\r
+#define UDP_CLEAR_EP_FLAGS(endpoint, flags) { \\r
+ volatile unsigned int reg; \\r
+ reg = pUdp->UDP_CSR[(endpoint)]; \\r
+ reg |= REG_NO_EFFECT_1_ALL; \\r
+ reg &= ~(flags); \\r
+ pUdp->UDP_CSR[(endpoint)] = reg; \\r
+} \r
+\r
+// Set flags in the UDP_CSR register\r
+#define UDP_SET_EP_FLAGS(endpoint, flags) { \\r
+ volatile unsigned int reg; \\r
+ reg = pUdp->UDP_CSR[(endpoint)]; \\r
+ reg |= REG_NO_EFFECT_1_ALL; \\r
+ reg |= (flags); \\r
+ pUdp->UDP_CSR[(endpoint)] = reg; \\r
+}\r
+\r
+/* USB standard request codes */\r
#define STD_GET_STATUS_ZERO 0x0080\r
#define STD_GET_STATUS_INTERFACE 0x0081\r
#define STD_GET_STATUS_ENDPOINT 0x0082\r
// Enable the function\r
pUdp->UDP_FADDR = AT91C_UDP_FEN;\r
// Configure endpoint 0\r
- pUdp->UDP_CSR[0] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL);\r
+ pUdp->UDP_CSR[AT91C_EP_CONTROL] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL);\r
}\r
else if (isr & AT91C_UDP_EPINT0) {\r
pUdp->UDP_ICR = AT91C_UDP_EPINT0;\r
return (pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank);\r
}\r
\r
+/**\r
+ In github PR #129, some users appears to get a false positive from\r
+ usb_poll, which returns true, but the usb_read operation\r
+ still returns 0.\r
+ This check is basically the same as above, but also checks\r
+ that the length available to read is non-zero, thus hopefully fixes the\r
+ bug.\r
+**/\r
+bool usb_poll_validate_length()\r
+{\r
+\r
+ if (!usb_check()) return false;\r
+ if (!(pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank)) return false;\r
+ return (pUdp->UDP_CSR[AT91C_EP_OUT] >> 16) > 0;\r
+}\r
+\r
//*----------------------------------------------------------------------------\r
//* \fn usb_read\r
//* \brief Read available data from Endpoint OUT\r
//*----------------------------------------------------------------------------\r
uint32_t usb_read(byte_t* data, size_t len) {\r
- byte_t bank = btReceiveBank;\r
+ byte_t bank = btReceiveBank;\r
uint32_t packetSize, nbBytesRcv = 0;\r
- uint32_t time_out = 0;\r
+ uint32_t time_out = 0;\r
\r
while (len) {\r
if (!usb_check()) break;\r
\r
if ( pUdp->UDP_CSR[AT91C_EP_OUT] & bank ) {\r
packetSize = MIN(pUdp->UDP_CSR[AT91C_EP_OUT] >> 16, len);\r
- len -= packetSize;\r
+ len -= packetSize;\r
while(packetSize--)\r
data[nbBytesRcv++] = pUdp->UDP_FDR[AT91C_EP_OUT];\r
- pUdp->UDP_CSR[AT91C_EP_OUT] &= ~(bank);\r
+ UDP_CLEAR_EP_FLAGS(AT91C_EP_OUT, bank);\r
if (bank == AT91C_UDP_RX_DATA_BK0) {\r
bank = AT91C_UDP_RX_DATA_BK1;\r
- } else {\r
+ } else {\r
bank = AT91C_UDP_RX_DATA_BK0;\r
- }\r
+ }\r
}\r
- if (time_out++ == 0x1fff) break;\r
+ if (time_out++ == 0x1fff) break;\r
}\r
\r
btReceiveBank = bank;\r
cpt = MIN(length, AT91C_EP_IN_SIZE-1);\r
length -= cpt;\r
while (cpt--) pUdp->UDP_FDR[AT91C_EP_IN] = *data++;\r
- pUdp->UDP_CSR[AT91C_EP_IN] |= AT91C_UDP_TXPKTRDY;\r
+ UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY);\r
\r
while (length) {\r
// Fill the second bank\r
cpt = MIN(length, AT91C_EP_IN_SIZE-1);\r
length -= cpt;\r
while (cpt--) pUdp->UDP_FDR[AT91C_EP_IN] = *data++;\r
- // Wait for the the first bank to be sent\r
+ // Wait for the first bank to be sent\r
while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) {\r
if (!usb_check()) return length;\r
}\r
- pUdp->UDP_CSR[AT91C_EP_IN] &= ~(AT91C_UDP_TXCOMP);\r
+ UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP);\r
while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP);\r
- pUdp->UDP_CSR[AT91C_EP_IN] |= AT91C_UDP_TXPKTRDY;\r
+ UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY);\r
}\r
\r
// Wait for the end of transfer\r
if (!usb_check()) return length;\r
}\r
\r
- pUdp->UDP_CSR[AT91C_EP_IN] &= ~(AT91C_UDP_TXCOMP);\r
+ UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP);\r
while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP);\r
\r
return length;\r
while (cpt--)\r
pUdp->UDP_FDR[0] = *pData++;\r
\r
- if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) {\r
- pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);\r
- while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP);\r
+ if (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) {\r
+ UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP);\r
+ while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP);\r
}\r
\r
- pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;\r
+ UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXPKTRDY);\r
do {\r
- csr = pUdp->UDP_CSR[0];\r
+ csr = pUdp->UDP_CSR[AT91C_EP_CONTROL];\r
\r
// Data IN stage has been stopped by a status OUT\r
if (csr & AT91C_UDP_RX_DATA_BK0) {\r
- pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0);\r
+ UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0);\r
return;\r
}\r
} while ( !(csr & AT91C_UDP_TXCOMP) );\r
\r
} while (length);\r
\r
- if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) {\r
- pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);\r
- while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP);\r
+ if (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) {\r
+ UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP);\r
+ while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP);\r
}\r
}\r
\r
//* \brief Send zero length packet through the control endpoint\r
//*----------------------------------------------------------------------------\r
void AT91F_USB_SendZlp(AT91PS_UDP pUdp) {\r
- pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;\r
- while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) );\r
- pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);\r
- while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP);\r
+ UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXPKTRDY);\r
+ while ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) );\r
+ UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP);\r
+ while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP);\r
}\r
\r
//*----------------------------------------------------------------------------\r
//* \brief Stall the control endpoint\r
//*----------------------------------------------------------------------------\r
void AT91F_USB_SendStall(AT91PS_UDP pUdp) {\r
- pUdp->UDP_CSR[0] |= AT91C_UDP_FORCESTALL;\r
- while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_ISOERROR) );\r
- pUdp->UDP_CSR[0] &= ~(AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR);\r
- while (pUdp->UDP_CSR[0] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR));\r
+ UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_FORCESTALL);\r
+ while ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_ISOERROR) );\r
+ UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR);\r
+ while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR));\r
}\r
\r
//*----------------------------------------------------------------------------\r
byte_t bmRequestType, bRequest;\r
uint16_t wValue, wIndex, wLength, wStatus;\r
\r
- if ( !(pUdp->UDP_CSR[0] & AT91C_UDP_RXSETUP) )\r
+ if ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP) )\r
return;\r
\r
bmRequestType = pUdp->UDP_FDR[0];\r
wLength |= (pUdp->UDP_FDR[0] << 8);\r
\r
if (bmRequestType & 0x80) {\r
- pUdp->UDP_CSR[0] |= AT91C_UDP_DIR;\r
- while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_DIR) );\r
+ UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_DIR);\r
+ while ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_DIR) );\r
}\r
- pUdp->UDP_CSR[0] &= ~AT91C_UDP_RXSETUP;\r
- while ( (pUdp->UDP_CSR[0] & AT91C_UDP_RXSETUP) );\r
+ UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RXSETUP);\r
+ while ( (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP) );\r
\r
// Handle supported standard device request Cf Table 9-3 in USB specification Rev 1.1\r
switch ((bRequest << 8) | bmRequestType) {\r
AT91F_USB_SendData(pUdp, devDescriptor, MIN(sizeof(devDescriptor), wLength));\r
else if (wValue == 0x200) // Return Configuration Descriptor\r
AT91F_USB_SendData(pUdp, cfgDescriptor, MIN(sizeof(cfgDescriptor), wLength));\r
- else if ((wValue & 0x300) == 0x300) // Return String Descriptor\r
- AT91F_USB_SendData(pUdp, strDescriptor, MIN(sizeof(strDescriptor), wLength));\r
+ else if ((wValue & 0xF00) == 0x300) { // Return String Descriptor\r
+ const char *strDescriptor = getStringDescriptor(wValue & 0xff);\r
+ if (strDescriptor != NULL) {\r
+ AT91F_USB_SendData(pUdp, strDescriptor, MIN(strDescriptor[0], wLength));\r
+ } else {\r
+ AT91F_USB_SendStall(pUdp);\r
+ }\r
+ }\r
else\r
AT91F_USB_SendStall(pUdp);\r
break;\r
\r
// handle CDC class requests\r
case SET_LINE_CODING:\r
- while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_RX_DATA_BK0) );\r
- pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0);\r
+ while ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RX_DATA_BK0) );\r
+ UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0);\r
AT91F_USB_SendZlp(pUdp);\r
break;\r
case GET_LINE_CODING:\r
projects / proxmark3-svn / blobdiff