//completed by Marshmellow
int EM4x50Read(const char *Cmd, bool verbose)
{
-
uint8_t fndClk[] = {8,16,32,40,50,64,128};
int clk = 0;
int invert = 0;
}
int usage_lf_em_read(void) {
- PrintAndLog("Read EM4x05/EM4x69. Tag must be on antenna. ");
+ PrintAndLog("Read EM 4x05/4x50/EM4x69. Tag must be on antenna. ");
PrintAndLog("");
PrintAndLog("Usage: lf em readword [h] <address> <pwd>");
PrintAndLog("Options:");
return 0;
}
-//search for given preamble in given BitStream and return success=1 or fail=0 and startIndex
-uint8_t EMpreambleSearch(uint8_t *BitStream, uint8_t *preamble, size_t pLen, size_t size, size_t *startIdx)
-{
- // Sanity check. If preamble length is bigger than bitstream length.
- if ( size <= pLen ) return 0;
- // em only sends preamble once, so look for it once in the first x bits
- uint8_t foundCnt = 0;
- for (int idx = 0; idx < size - pLen; idx++){
- if (memcmp(BitStream+idx, preamble, pLen) == 0){
- //first index found
- foundCnt++;
- if (foundCnt == 1) {
- *startIdx = idx;
- return 1;
- }
- }
- }
+int usage_lf_em_write(void) {
+ PrintAndLog("Write EM 4x05/4x50/4x69. Tag must be on antenna. ");
+ PrintAndLog("");
+ PrintAndLog("Usage: lf em writeword [h] <address> <data> <pwd>");
+ PrintAndLog("Options:");
+ PrintAndLog(" h - this help");
+ PrintAndLog(" address - memory address to write to. (0-15)");
+ PrintAndLog(" data - data to write (hex)");
+ PrintAndLog(" pwd - password (hex) (optional)");
+ PrintAndLog("samples:");
+ PrintAndLog(" lf em writeword 1");
+ PrintAndLog(" lf em writeword 1 deadc0de 11223344");
return 0;
}
-// FSK, PSK, ASK/MANCHESTER, ASK/BIPHASE, ASK/DIPHASE
-// should cover 90% of known used configs
-// the rest will need to be manually demoded for now...
-int demodEM4x05resp(uint8_t bitsNeeded) {
- int ans = 0;
- bool demodFound = false;
- DemodBufferLen = 0x00;
- // skip first two 0 bits as they might have been missed in the demod
- uint8_t preamble[6] = {0,0,1,0,1,0};
-
- // test for FSK wave (easiest to 99% ID)
- if (GetFskClock("", FALSE, FALSE)) {
- //valid fsk clocks found
- ans = FSKrawDemod("0 0", false);
- if (!ans) {
- if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305: FSK Demod failed");
- } else {
- // set size to 10 to only test first 4 positions for the preamble
- size_t size = (10 > DemodBufferLen) ? DemodBufferLen : 10;
- size_t startIdx = 0;
-
- if (g_debugMode) PrintAndLog("ANS: %d | %u | %u", ans, startIdx, size);
-
- uint8_t errChk = !EMpreambleSearch(DemodBuffer, preamble, sizeof(preamble), size, &startIdx);
- if ( errChk == 0) {
- if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305 preamble not found :: %d", startIdx);
- } else {
- //can't test size because the preamble doesn't repeat :(
- //meaning chances of false positives are high.
- demodFound = true;
- }
- }
- }
- // PSK clocks should be easy to detect ( but difficult to demod a non-repeating pattern... )
- if (!demodFound) {
- ans = GetPskClock("", FALSE, FALSE);
- if (ans>0) {
- PrintAndLog("PSK response possibly found, run `data rawd p1` to attempt to demod");
+#define EM_PREAMBLE_LEN 6
+// download samples from device
+// and copy them to Graphbuffer
+bool downloadSamplesEM(){
+
+ // 8 bit preamble + 32 bit word response (max clock (128) * 40bits = 5120 samples)
+ uint8_t got[6000];
+ GetFromBigBuf(got, sizeof(got), 0);
+ if ( !WaitForResponseTimeout(CMD_ACK, NULL, 2500) ) {
+ PrintAndLog("command execution time out");
+ return FALSE;
}
+ setGraphBuf(got, sizeof(got));
+ return TRUE;
+}
+//search for given preamble in given BitStream and return success=1 or fail=0 and startIndex
+bool doPreambleSearch(size_t *startIdx){
+
+ // sanity check
+ if ( DemodBufferLen < EM_PREAMBLE_LEN) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305 demodbuffer too small");
+ return FALSE;
}
-
- // more common than biphase
- if (!demodFound) {
- DemodBufferLen = 0x00;
- // try manchester - NOTE: ST only applies to T55x7 tags.
- ans = ASKDemod_ext("0,0,1", false, false, 1, false);
- if (!ans) {
- if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305: ASK/Manchester Demod failed");
- } else {
- // set size to 10 to only test first 4 positions for the preamble
- size_t size = (10 > DemodBufferLen) ? DemodBufferLen : 10;
- size_t startIdx = 0;
-
- if (g_debugMode) PrintAndLog("ANS: %d | %u | %u", ans, startIdx, size);
-
- uint8_t errChk = !EMpreambleSearch(DemodBuffer, preamble, sizeof(preamble), size, &startIdx);
- if ( errChk == 0) {
- if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305 preamble not found :: %d", startIdx);
- } else {
- //can't test size because the preamble doesn't repeat :(
- //meaning chances of false positives are high.
- demodFound = true;
- }
+
+ // skip first two 0 bits as they might have been missed in the demod
+ uint8_t preamble[EM_PREAMBLE_LEN] = {0,0,1,0,1,0};
+
+ // set size to 10 to only test first 4 positions for the preamble
+ size_t size = (10 > DemodBufferLen) ? DemodBufferLen : 10;
+ *startIdx = 0;
+ uint8_t found = 0;
+
+ // em only sends preamble once, so look for it once in the first x bits
+ for (int idx = 0; idx < size - EM_PREAMBLE_LEN; idx++){
+ if (memcmp(DemodBuffer+idx, preamble, EM_PREAMBLE_LEN) == 0){
+ //first index found
+ *startIdx = idx;
+ found = 1;
+ break;
}
}
+
+ if ( !found) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305 preamble not found :: %d", *startIdx);
+ return FALSE;
+ }
+ return TRUE;
+}
- if (!demodFound) {
- DemodBufferLen = 0x00;
- //try biphase
- ans = ASKbiphaseDemod("0 0 1", FALSE);
- if (!ans) {
- if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305: ASK/biphase Demod failed");
- //return -1;
- } else {
- // set size to 10 to only test first 4 positions for the preamble
- size_t size = (10 > DemodBufferLen) ? DemodBufferLen : 10;
- size_t startIdx = 0;
-
- if (g_debugMode) PrintAndLog("ANS: %d | %u | %u", ans, startIdx, size);
-
- uint8_t errChk = !EMpreambleSearch(DemodBuffer, preamble, sizeof(preamble), size, &startIdx);
- if ( errChk == 0) {
- if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305 preamble not found :: %d", startIdx);
- //return -1;
- } else {
- //can't test size because the preamble doesn't repeat :(
- //meaning chances of false positives are high.
- demodFound = true;
- }
- }
+bool detectFSK(){
+ // detect fsk clock
+ if (!GetFskClock("", FALSE, FALSE)) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305: FSK clock failed");
+ return FALSE;
}
-
- if (!demodFound) {
- DemodBufferLen = 0x00;
- //try diphase (differential biphase or inverted)
+ // demod
+ int ans = FSKrawDemod("0 0", FALSE);
+ if (!ans) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305: FSK Demod failed");
+ return FALSE;
+ }
+ return TRUE;
+}
+// PSK clocks should be easy to detect ( but difficult to demod a non-repeating pattern... )
+bool detectPSK(){
+ int ans = GetPskClock("", FALSE, FALSE);
+ if (ans <= 0) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305: PSK clock failed");
+ return FALSE;
+ }
+ PrintAndLog("PSK response possibly found, run `data rawd p1` to attempt to demod");
+ return TRUE;
+}
+// try manchester - NOTE: ST only applies to T55x7 tags.
+bool detectASK_MAN(){
+ bool stcheck = FALSE;
+ int ans = ASKDemod_ext("0 0 0", FALSE, FALSE, 1, &stcheck);
+ if (!ans) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305: ASK/Manchester Demod failed");
+ return FALSE;
+ }
+ return TRUE;
+}
+bool detectASK_BI(){
+ int ans = ASKbiphaseDemod("0 0 1", FALSE);
+ if (!ans) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305: ASK/biphase normal demod failed");
+
ans = ASKbiphaseDemod("0 1 1", FALSE);
if (!ans) {
- if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305: ASK/biphase Demod failed");
- } else {
- // set size to 10 to only test first 4 positions for the preamble
- size_t size = (10 > DemodBufferLen) ? DemodBufferLen : 10;
- size_t startIdx = 0;
-
- if (g_debugMode) PrintAndLog("ANS: %d | %u | %u", ans, startIdx, size);
-
- uint8_t errChk = !EMpreambleSearch(DemodBuffer, preamble, sizeof(preamble), size, &startIdx);
- if ( errChk == 0) {
- if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305 preamble not found :: %d", startIdx);
- } else {
- //can't test size because the preamble doesn't repeat :(
- //meaning chances of false positives are high.
- demodFound = true;
- }
+ if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305: ASK/biphase inverted demod failed");
+ return FALSE;
}
}
+ return TRUE;
+}
- if (demodFound && bitsNeeded < DemodBufferLen) {
- if (bitsNeeded > 0) {
- setDemodBuf(DemodBuffer + ans + sizeof(preamble), bitsNeeded, 0);
+// param: idx - start index in demoded data.
+int setDemodBufferEM(uint8_t bitsNeeded, size_t idx){
+ if ( bitsNeeded < DemodBufferLen) {
+ setDemodBuf(DemodBuffer + idx + EM_PREAMBLE_LEN, bitsNeeded, 0);
CmdPrintDemodBuff("x");
- }
return 1;
}
return -1;
}
+// FSK, PSK, ASK/MANCHESTER, ASK/BIPHASE, ASK/DIPHASE
+// should cover 90% of known used configs
+// the rest will need to be manually demoded for now...
+int demodEM4x05resp(uint8_t bitsNeeded) {
+ size_t startIdx = 0;
+
+ if (detectASK_MAN() && doPreambleSearch( &startIdx ))
+ return setDemodBufferEM(bitsNeeded, startIdx);
+
+ if (detectASK_BI() && doPreambleSearch( &startIdx ))
+ return setDemodBufferEM(bitsNeeded, startIdx);
+
+ if (detectFSK() && doPreambleSearch( &startIdx ))
+ return setDemodBufferEM(bitsNeeded, startIdx);
+
+ if (detectPSK() && doPreambleSearch( &startIdx ))
+ return setDemodBufferEM(bitsNeeded, startIdx);
+
+ return -1;
+}
+
int CmdReadWord(const char *Cmd) {
int addr, pwd;
bool usePwd = false;
PrintAndLog("Command timed out");
return -1;
}
-
- uint8_t got[6000];
- GetFromBigBuf(got, sizeof(got), 0);
- if ( !WaitForResponseTimeout(CMD_ACK, NULL, 2500) ) {
- PrintAndLog("command execution time out");
+
+ if (!downloadSamplesEM())
return -1;
- }
- setGraphBuf(got, sizeof(got));
+
int testLen = (GraphTraceLen < 1000) ? GraphTraceLen : 1000;
if (graphJustNoise(GraphBuffer, testLen)) {
- PrintAndLog("no tag not found");
+ PrintAndLog("Tag not found");
return -1;
}
//attempt demod:
//need 32 bits from a read word
- return demodEM4x05resp(32);
+ int result = demodEM4x05resp(44);
+ if (result == -1)
+ PrintAndLog("Read failed");
+
+ return result;
}
-int usage_lf_em_write(void) {
- PrintAndLog("Write EM4x05/EM4x69. Tag must be on antenna. ");
- PrintAndLog("");
- PrintAndLog("Usage: lf em writeword [h] <address> <data> <pwd>");
- PrintAndLog("Options:");
- PrintAndLog(" h - this help");
- PrintAndLog(" address - memory address to write to. (0-15)");
- PrintAndLog(" data - data to write (hex)");
- PrintAndLog(" pwd - password (hex) (optional)");
- PrintAndLog("samples:");
- PrintAndLog(" lf em writeword 1");
- PrintAndLog(" lf em writeword 1 deadc0de 11223344");
- return 0;
-}
int CmdWriteWord(const char *Cmd) {
uint8_t ctmp = param_getchar(Cmd, 0);
if ( strlen(Cmd) == 0 || ctmp == 'H' || ctmp == 'h' ) return usage_lf_em_write();
- bool usePwd = false;
-
+ bool usePwd = false;
int addr = 16; // default to invalid address
int data = 0xFFFFFFFF; // default to blank data
int pwd = 0xFFFFFFFF; // default to blank password
data = param_get32ex(Cmd, 1, -1, 16);
pwd = param_get32ex(Cmd, 2, -1, 16);
-
if ( (addr > 15) || (addr < 0 ) || ( addr == -1) ) {
PrintAndLog("Address must be between 0 and 15");
return 1;
return -1;
}
- //get response if there is one
- uint8_t got[6000]; // 8 bit preamble + 32 bit word response (max clock (128) * 40bits = 5120 samples)
- GetFromBigBuf(got, sizeof(got), 0);
- if ( !WaitForResponseTimeout(CMD_ACK, NULL, 8000) ) {
- PrintAndLog("command execution time out");
- return -2;
- }
- setGraphBuf(got, sizeof(got));
-
+ if (!downloadSamplesEM())
+ return -1;
+
//todo: check response for 00001010 then write data for write confirmation!
//attempt demod:
//need 0 bits demoded (after preamble) to verify write cmd
int result = demodEM4x05resp(0);
- if (result == 1) {
+ if (result == 1)
PrintAndLog("Write Verified");
- }
+
return result;
- return 0;
}
static command_t CommandTable[] = {
projects / proxmark3-svn / blobdiff