- uint64_t id = 0;
- unsigned int card;
-
- sscanf(Cmd, "%" PRIx64 " %d", &id, &card);
-
- if (id >= 0x10000000000) {
- PrintAndLog("Error! Given EM410x ID is longer than 40 bits.\n");
- return 0;
- }
-
- if (card > 1) {
- PrintAndLog("Error! Bad card type selected.\n");
- return 0;
- }
+ uint64_t id = 0xFFFFFFFFFFFFFFFF; // invalid id value
+ int card = 0xFF; // invalid card value
+ unsigned int clock = 0; // invalid clock value
+
+ sscanf(Cmd, "%" PRIx64 " %d %d", &id, &card, &clock);
+
+ // Check ID
+ if (id == 0xFFFFFFFFFFFFFFFF) {
+ PrintAndLog("Error! ID is required.\n");
+ return 0;
+ }
+ if (id >= 0x10000000000) {
+ PrintAndLog("Error! Given EM410x ID is longer than 40 bits.\n");
+ return 0;
+ }
+
+ // Check Card
+ if (card == 0xFF) {
+ PrintAndLog("Error! Card type required.\n");
+ return 0;
+ }
+ if (card < 0) {
+ PrintAndLog("Error! Bad card type selected.\n");
+ return 0;
+ }
+
+ // Check Clock
+ if (card == 1)
+ {
+ // Default: 64
+ if (clock == 0)
+ clock = 64;
+
+ // Allowed clock rates: 16, 32 and 64
+ if ((clock != 16) && (clock != 32) && (clock != 64)) {
+ PrintAndLog("Error! Clock rate %d not valid. Supported clock rates are 16, 32 and 64.\n", clock);
+ return 0;
+ }
+ }
+ else if (clock != 0)
+ {
+ PrintAndLog("Error! Clock rate is only supported on T55x7 tags.\n");
+ return 0;
+ }
+
+ if (card == 1) {
+ PrintAndLog("Writing %s tag with UID 0x%010" PRIx64 " (clock rate: %d)", "T55x7", id, clock);
+ // NOTE: We really should pass the clock in as a separate argument, but to
+ // provide for backwards-compatibility for older firmware, and to avoid
+ // having to add another argument to CMD_EM410X_WRITE_TAG, we just store
+ // the clock rate in bits 8-15 of the card value
+ card = (card & 0xFF) | (((uint64_t)clock << 8) & 0xFF00);
+ }
+ else if (card == 0)
+ PrintAndLog("Writing %s tag with UID 0x%010" PRIx64, "T5555", id, clock);
+ else {
+ PrintAndLog("Error! Bad card type selected.\n");
+ return 0;
+ }
projects / proxmark3-svn / blobdiff