// Hardware commands
//-----------------------------------------------------------------------------
+#include "cmdhw.h"
+
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <limits.h>
#include "ui.h"
-//#include "proxusb.h"
-#include "proxmark3.h"
+#include "comms.h"
#include "cmdparser.h"
-#include "cmdhw.h"
+#include "cmdmain.h"
+#include "cmddata.h"
-/* low-level hardware control */
+
+static uint32_t hw_capabilities = 0;
static int CmdHelp(const char *Cmd);
+static void lookupChipID(uint32_t iChipID, uint32_t mem_used)
+{
+ char asBuff[100];
+ uint32_t mem_avail = 0;
+
+ switch(iChipID)
+ {
+ case 0x270B0A40:
+ sprintf(asBuff,"AT91SAM7S512 Rev A");
+ break;
+ case 0x270B0A4F:
+ sprintf(asBuff,"AT91SAM7S512 Rev B");
+ break;
+ case 0x270D0940:
+ sprintf(asBuff,"AT91SAM7S256 Rev A");
+ break;
+ case 0x270B0941:
+ sprintf(asBuff,"AT91SAM7S256 Rev B");
+ break;
+ case 0x270B0942:
+ sprintf(asBuff,"AT91SAM7S256 Rev C");
+ break;
+ case 0x270B0943:
+ sprintf(asBuff,"AT91SAM7S256 Rev D");
+ break;
+ case 0x270C0740:
+ sprintf(asBuff,"AT91SAM7S128 Rev A");
+ break;
+ case 0x270A0741:
+ sprintf(asBuff,"AT91SAM7S128 Rev B");
+ break;
+ case 0x270A0742:
+ sprintf(asBuff,"AT91SAM7S128 Rev C");
+ break;
+ case 0x270A0743:
+ sprintf(asBuff,"AT91SAM7S128 Rev D");
+ break;
+ case 0x27090540:
+ sprintf(asBuff,"AT91SAM7S64 Rev A");
+ break;
+ case 0x27090543:
+ sprintf(asBuff,"AT91SAM7S64 Rev B");
+ break;
+ case 0x27090544:
+ sprintf(asBuff,"AT91SAM7S64 Rev C");
+ break;
+ case 0x27080342:
+ sprintf(asBuff,"AT91SAM7S321 Rev A");
+ break;
+ case 0x27080340:
+ sprintf(asBuff,"AT91SAM7S32 Rev A");
+ break;
+ case 0x27080341:
+ sprintf(asBuff,"AT91SAM7S32 Rev B");
+ break;
+ case 0x27050241:
+ sprintf(asBuff,"AT9SAM7S161 Rev A");
+ break;
+ case 0x27050240:
+ sprintf(asBuff,"AT91SAM7S16 Rev A");
+ break;
+ }
+ PrintAndLog("uC: %s",asBuff);
+ switch((iChipID&0xE0)>>5)
+ {
+ case 1:
+ sprintf(asBuff,"ARM946ES");
+ break;
+ case 2:
+ sprintf(asBuff,"ARM7TDMI");
+ break;
+ case 4:
+ sprintf(asBuff,"ARM920T");
+ break;
+ case 5:
+ sprintf(asBuff,"ARM926EJS");
+ break;
+ }
+ PrintAndLog("Embedded Processor: %s",asBuff);
+ switch((iChipID&0xF00)>>8)
+ {
+ case 0:
+ mem_avail = 0;
+ break;
+ case 1:
+ mem_avail = 8;
+ break;
+ case 2:
+ mem_avail = 16;
+ break;
+ case 3:
+ mem_avail = 32;
+ break;
+ case 5:
+ mem_avail = 64;
+ break;
+ case 7:
+ mem_avail = 128;
+ break;
+ case 9:
+ mem_avail = 256;
+ break;
+ case 10:
+ mem_avail = 512;
+ break;
+ case 12:
+ mem_avail = 1024;
+ break;
+ case 14:
+ mem_avail = 2048;
+ break;
+ }
+ PrintAndLog("Nonvolatile Program Memory Size: %dK bytes. Used: %d bytes (%2.0f\%). Free: %d bytes (%2.0f\%).",
+ mem_avail,
+ mem_used,
+ mem_avail == 0 ? 0 : (float)mem_used/(mem_avail*1024)*100,
+ mem_avail*1024 - mem_used,
+ mem_avail == 0 ? 0 : (float)(mem_avail*1024-mem_used)/(mem_avail*1024)*100
+ );
+ switch((iChipID&0xF000)>>12)
+ {
+ case 0:
+ sprintf(asBuff,"None");
+ break;
+ case 1:
+ sprintf(asBuff,"8K bytes");
+ break;
+ case 2:
+ sprintf(asBuff,"16K bytes");
+ break;
+ case 3:
+ sprintf(asBuff,"32K bytes");
+ break;
+ case 5:
+ sprintf(asBuff,"64K bytes");
+ break;
+ case 7:
+ sprintf(asBuff,"128K bytes");
+ break;
+ case 9:
+ sprintf(asBuff,"256K bytes");
+ break;
+ case 10:
+ sprintf(asBuff,"512K bytes");
+ break;
+ case 12:
+ sprintf(asBuff,"1024K bytes");
+ break;
+ case 14:
+ sprintf(asBuff,"2048K bytes");
+ break;
+ }
+ PrintAndLog("Second Nonvolatile Program Memory Size: %s",asBuff);
+ switch((iChipID&0xF0000)>>16)
+ {
+ case 1:
+ sprintf(asBuff,"1K bytes");
+ break;
+ case 2:
+ sprintf(asBuff,"2K bytes");
+ break;
+ case 3:
+ sprintf(asBuff,"6K bytes");
+ break;
+ case 4:
+ sprintf(asBuff,"112K bytes");
+ break;
+ case 5:
+ sprintf(asBuff,"4K bytes");
+ break;
+ case 6:
+ sprintf(asBuff,"80K bytes");
+ break;
+ case 7:
+ sprintf(asBuff,"160K bytes");
+ break;
+ case 8:
+ sprintf(asBuff,"8K bytes");
+ break;
+ case 9:
+ sprintf(asBuff,"16K bytes");
+ break;
+ case 10:
+ sprintf(asBuff,"32K bytes");
+ break;
+ case 11:
+ sprintf(asBuff,"64K bytes");
+ break;
+ case 12:
+ sprintf(asBuff,"128K bytes");
+ break;
+ case 13:
+ sprintf(asBuff,"256K bytes");
+ break;
+ case 14:
+ sprintf(asBuff,"96K bytes");
+ break;
+ case 15:
+ sprintf(asBuff,"512K bytes");
+ break;
+ }
+ PrintAndLog("Internal SRAM Size: %s",asBuff);
+ switch((iChipID&0xFF00000)>>20)
+ {
+ case 0x19:
+ sprintf(asBuff,"AT91SAM9xx Series");
+ break;
+ case 0x29:
+ sprintf(asBuff,"AT91SAM9XExx Series");
+ break;
+ case 0x34:
+ sprintf(asBuff,"AT91x34 Series");
+ break;
+ case 0x37:
+ sprintf(asBuff,"CAP7 Series");
+ break;
+ case 0x39:
+ sprintf(asBuff,"CAP9 Series");
+ break;
+ case 0x3B:
+ sprintf(asBuff,"CAP11 Series");
+ break;
+ case 0x40:
+ sprintf(asBuff,"AT91x40 Series");
+ break;
+ case 0x42:
+ sprintf(asBuff,"AT91x42 Series");
+ break;
+ case 0x55:
+ sprintf(asBuff,"AT91x55 Series");
+ break;
+ case 0x60:
+ sprintf(asBuff,"AT91SAM7Axx Series");
+ break;
+ case 0x61:
+ sprintf(asBuff,"AT91SAM7AQxx Series");
+ break;
+ case 0x63:
+ sprintf(asBuff,"AT91x63 Series");
+ break;
+ case 0x70:
+ sprintf(asBuff,"AT91SAM7Sxx Series");
+ break;
+ case 0x71:
+ sprintf(asBuff,"AT91SAM7XCxx Series");
+ break;
+ case 0x72:
+ sprintf(asBuff,"AT91SAM7SExx Series");
+ break;
+ case 0x73:
+ sprintf(asBuff,"AT91SAM7Lxx Series");
+ break;
+ case 0x75:
+ sprintf(asBuff,"AT91SAM7Xxx Series");
+ break;
+ case 0x92:
+ sprintf(asBuff,"AT91x92 Series");
+ break;
+ case 0xF0:
+ sprintf(asBuff,"AT75Cxx Series");
+ break;
+ }
+ PrintAndLog("Architecture Identifier: %s",asBuff);
+ switch((iChipID&0x70000000)>>28)
+ {
+ case 0:
+ sprintf(asBuff,"ROM");
+ break;
+ case 1:
+ sprintf(asBuff,"ROMless or on-chip Flash");
+ break;
+ case 4:
+ sprintf(asBuff,"SRAM emulating ROM");
+ break;
+ case 2:
+ sprintf(asBuff,"Embedded Flash Memory");
+ break;
+ case 3:
+ sprintf(asBuff,"ROM and Embedded Flash Memory\nNVPSIZ is ROM size\nNVPSIZ2 is Flash size");
+ break;
+ }
+ PrintAndLog("Nonvolatile Program Memory Type: %s",asBuff);
+}
+
int CmdDetectReader(const char *Cmd)
{
UsbCommand c={CMD_LISTEN_READER_FIELD};
int CmdLCD(const char *Cmd)
{
- int i, j;
+ unsigned int i, j;
UsbCommand c={CMD_LCD};
- sscanf(Cmd, "%x %d", &i, &j);
+ sscanf(Cmd, "%x %u", &i, &j);
while (j--) {
c.arg[0] = i & 0x1ff;
SendCommand(&c);
int CmdSetDivisor(const char *Cmd)
{
UsbCommand c = {CMD_SET_LF_DIVISOR, {strtol(Cmd, NULL, 0), 0, 0}};
- if (c.arg[0] < 0 || c.arg[0] > 255) {
+ if (c.arg[0] < 19 || c.arg[0] > 255) {
PrintAndLog("divisor must be between 19 and 255");
} else {
SendCommand(&c);
int CmdTune(const char *Cmd)
{
- UsbCommand c = {CMD_MEASURE_ANTENNA_TUNING};
- SendCommand(&c);
- return 0;
+ return CmdTuneSamples(Cmd);
+}
+
+bool PM3hasSmartcardSlot(void) {
+ return (hw_capabilities & HAS_SMARTCARD_SLOT);
}
int CmdVersion(const char *Cmd)
{
- UsbCommand c = {CMD_VERSION};
- SendCommand(&c);
- return 0;
+
+ clearCommandBuffer();
+ UsbCommand c = {CMD_VERSION};
+ UsbCommand resp = {0, {0, 0, 0}};
+
+ SendCommand(&c);
+ if (WaitForResponseTimeout(CMD_ACK, &resp, 1000)) {
+ PrintAndLog("Prox/RFID mark3 RFID instrument");
+ PrintAndLog((char*)resp.d.asBytes);
+ lookupChipID(resp.arg[0], resp.arg[1]);
+ hw_capabilities = resp.arg[2];
+ }
+ return 0;
+}
+
+int CmdStatus(const char *Cmd)
+{
+ clearCommandBuffer();
+ UsbCommand c = {CMD_STATUS};
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK, &c, 1900)) {
+ PrintAndLog("Status command failed. USB Speed Test timed out");
+ }
+ return 0;
+}
+
+
+int CmdPing(const char *Cmd)
+{
+ clearCommandBuffer();
+ UsbCommand resp;
+ UsbCommand c = {CMD_PING};
+ SendCommand(&c);
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
+ PrintAndLog("Ping successful");
+ }else{
+ PrintAndLog("Ping failed");
+ }
+ return 0;
}
static command_t CommandTable[] =
{
- {"help", CmdHelp, 1, "This help"},
- {"detectreader", CmdDetectReader,0, "['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)"},
- {"fpgaoff", CmdFPGAOff, 0, "Set FPGA off"},
- {"lcd", CmdLCD, 0, "<HEX command> <count> -- Send command/data to LCD"},
- {"lcdreset", CmdLCDReset, 0, "Hardware reset LCD"},
- {"readmem", CmdReadmem, 0, "[address] -- Read memory at decimal address from flash"},
- {"reset", CmdReset, 0, "Reset the Proxmark3"},
- {"setlfdivisor", CmdSetDivisor, 0, "<19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)"},
- {"setmux", CmdSetMux, 0, "<loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value"},
- {"tune", CmdTune, 0, "Measure antenna tuning"},
- {"version", CmdVersion, 0, "Show version inforation about the connected Proxmark"},
- {NULL, NULL, 0, NULL}
+ {"help", CmdHelp, 1, "This help"},
+ {"detectreader", CmdDetectReader,0, "['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)"},
+ {"fpgaoff", CmdFPGAOff, 0, "Set FPGA off"},
+ {"lcd", CmdLCD, 0, "<HEX command> <count> -- Send command/data to LCD"},
+ {"lcdreset", CmdLCDReset, 0, "Hardware reset LCD"},
+ {"readmem", CmdReadmem, 0, "[address] -- Read memory at decimal address from flash"},
+ {"reset", CmdReset, 0, "Reset the Proxmark3"},
+ {"setlfdivisor", CmdSetDivisor, 0, "<19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)"},
+ {"setmux", CmdSetMux, 0, "<loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value"},
+ {"tune", CmdTune, 0, "['l'|'h'] -- Measure antenna tuning (option 'l' or 'h' to limit to LF or HF)"},
+ {"version", CmdVersion, 0, "Show version information about the connected Proxmark"},
+ {"status", CmdStatus, 0, "Show runtime status information about the connected Proxmark"},
+ {"ping", CmdPing, 0, "Test if the pm3 is responsive"},
+ {NULL, NULL, 0, NULL}
};
int CmdHW(const char *Cmd)
projects / proxmark3-svn / blobdiff