Mfp commands (#698)

[proxmark3-svn] / armsrc / iso14443a.c

diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c
index a8273e5e1bc1fda9d4ea358d15258ab49f070611..059db71e5f0708f39f3c5128f3051a4d5197f2e6 100644 (file)
--- a/armsrc/iso14443a.c
+++ b/armsrc/iso14443a.c
@@ -1405,7 +1405,7 @@ int EmGetCmd(uint8_t *received, uint16_t *len, uint8_t *parity)
                                ADC_MODE_PRESCALE(63) |
                                ADC_MODE_STARTUP_TIME(1) |
                                ADC_MODE_SAMPLE_HOLD_TIME(15);
-       AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ADC_CHAN_HF);
+       AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ADC_CHAN_HF_LOW);
        // start ADC
        AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
        
@@ -1432,12 +1432,12 @@ int EmGetCmd(uint8_t *received, uint16_t *len, uint8_t *parity)
                if (BUTTON_PRESS()) return 1;
 
                // test if the field exists
-               if (AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ADC_CHAN_HF)) {
+               if (AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ADC_CHAN_HF_LOW)) {
                        analogCnt++;
-                       analogAVG += AT91C_BASE_ADC->ADC_CDR[ADC_CHAN_HF];
+                       analogAVG += AT91C_BASE_ADC->ADC_CDR[ADC_CHAN_HF_LOW];
                        AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
                        if (analogCnt >= 32) {
-                               if ((MAX_ADC_HF_VOLTAGE * (analogAVG / analogCnt) >> 10) < MF_MINFIELDV) {
+                               if ((MAX_ADC_HF_VOLTAGE_LOW * (analogAVG / analogCnt) >> 10) < MF_MINFIELDV) {
                                        vtime = GetTickCount();
                                        if (!timer) timer = vtime;
                                        // 50ms no field --> card to idle state
@@ -1889,7 +1889,7 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u
 void iso14443a_setup(uint8_t fpga_minor_mode) {
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
        // Set up the synchronous serial port
-       FpgaSetupSsc();
+       FpgaSetupSsc(FPGA_MAJOR_MODE_HF_ISO14443A);
        // connect Demodulated Signal to ADC:
        SetAdcMuxFor(GPIO_MUXSEL_HIPKD);