reg [5:0] corr_i_cnt;
reg [5:0] corr_q_cnt;
// And a couple of registers in which to accumulate the correlations.
-reg signed [15:0] corr_i_accum;
-reg signed [15:0] corr_q_accum;
+// we would add at most 32 times adc_d, the result can be held in 13 bits.
+// Need one additional bit because it can be negative as well
+reg signed [13:0] corr_i_accum;
+reg signed [13:0] corr_q_accum;
reg signed [7:0] corr_i_out;
reg signed [7:0] corr_q_out;
begin
if(snoop)
begin
- corr_i_out <= {corr_i_accum[12:6], after_hysteresis_prev};
- corr_q_out <= {corr_q_accum[12:6], after_hysteresis};
+ // highest 7 significant bits of tag signal (signed), 1 bit reader signal:
+ corr_i_out <= {corr_i_accum[13:7], after_hysteresis_prev};
+ corr_q_out <= {corr_q_accum[13:7], after_hysteresis};
end
else
begin
- // Only correlations need to be delivered.
+ // highest 8 significant bits of tag signal
corr_i_out <= corr_i_accum[13:6];
corr_q_out <= corr_q_accum[13:6];
end