#include "usb_cmd.h"
uint8_t DemodBuffer[MAX_DEMOD_BUF_LEN];
+uint8_t g_debugMode;
int DemodBufferLen;
static int CmdHelp(const char *Cmd);
//set the demod buffer with given array of binary (one bit per byte)
//by marshmellow
-void setDemodBuf(uint8_t *buff,int size)
+void setDemodBuf(uint8_t *buff, size_t size, size_t startIdx)
{
- int i=0;
- for (; i < size; ++i){
- DemodBuffer[i]=buff[i];
+ size_t i = 0;
+ for (; i < size; i++){
+ DemodBuffer[i]=buff[startIdx++];
}
DemodBufferLen=size;
return;
}
+int CmdSetDebugMode(const char *Cmd)
+{
+ int demod=0;
+ sscanf(Cmd, "%i", &demod);
+ g_debugMode=(uint8_t)demod;
+ return 1;
+}
+
//by marshmellow
-void printDemodBuff()
+void printDemodBuff(void)
{
uint32_t i = 0;
int bitLen = DemodBufferLen;
return;
}
if (bitLen>512) bitLen=512; //max output to 512 bits if we have more - should be plenty
+
+ // ensure equally divided by 16
+ bitLen &= 0xfff0;
+
for (i = 0; i <= (bitLen-16); i+=16) {
PrintAndLog("%i%i%i%i%i%i%i%i%i%i%i%i%i%i%i%i",
DemodBuffer[i],
return;
}
-
+int CmdPrintDemodBuff(const char *Cmd)
+{
+ char hex;
+ char printBuff[512]={0x00};
+ uint8_t numBits = DemodBufferLen & 0xFFF0;
+ sscanf(Cmd, "%c", &hex);
+ if (hex == 'h'){
+ PrintAndLog("Usage: data printdemodbuffer [x]");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" x output in hex (omit for binary output)");
+ return 0;
+ }
+ if (hex == 'x'){
+ numBits = binarraytohex(printBuff, (char *)DemodBuffer, numBits);
+ if (numBits==0) return 0;
+ PrintAndLog("DemodBuffer: %s",printBuff);
+ } else {
+ printDemodBuff();
+ }
+ return 1;
+}
int CmdAmp(const char *Cmd)
{
int i, rising, falling;
* Updates the Graph trace with 0/1 values
*
* Arguments:
- * c : 0 or 1
+ * c : 0 or 1 (or invert)
*/
- //this method is dependant on all highs and lows to be the same(or clipped) this creates issues[marshmellow] it also ignores the clock
+ //this method ignores the clock
+
+ //this function strictly converts highs and lows to 1s and 0s for each sample in the graphbuffer
int Cmdaskdemod(const char *Cmd)
{
int i;
int c, high = 0, low = 0;
- // TODO: complain if we do not give 2 arguments here !
- // (AL - this doesn't make sense! we're only using one argument!!!)
sscanf(Cmd, "%i", &c);
- /* Detect high and lows and clock */
- // (AL - clock???)
+ /* Detect high and lows */
for (i = 0; i < GraphTraceLen; ++i)
{
if (GraphBuffer[i] > high)
* down)
*/
//[marhsmellow] change == to >= for high and <= for low for fuzz
- if ((GraphBuffer[i] == high) && (GraphBuffer[i - 1] == c)) {
+ if ((GraphBuffer[i] >= high) && (GraphBuffer[i - 1] == c)) {
GraphBuffer[i] = 1 - c;
- } else if ((GraphBuffer[i] == low) && (GraphBuffer[i - 1] == (1 - c))){
+ } else if ((GraphBuffer[i] <= low) && (GraphBuffer[i - 1] == (1 - c))){
GraphBuffer[i] = c;
} else {
/* No transition */
return 0;
}
+//this function strictly converts >1 to 1 and <1 to 0 for each sample in the graphbuffer
+int CmdGetBitStream(const char *Cmd)
+{
+ int i;
+ CmdHpf(Cmd);
+ for (i = 0; i < GraphTraceLen; i++) {
+ if (GraphBuffer[i] >= 1) {
+ GraphBuffer[i] = 1;
+ } else {
+ GraphBuffer[i] = 0;
+ }
+ }
+ RepaintGraphWindow();
+ return 0;
+}
+
+
//by marshmellow
void printBitStream(uint8_t BitStream[], uint32_t bitLen)
{
- uint32_t i = 0;
- if (bitLen<16) {
- PrintAndLog("Too few bits found: %d",bitLen);
- return;
- }
- if (bitLen>512) bitLen=512;
- for (i = 0; i <= (bitLen-16); i+=16) {
- PrintAndLog("%i%i%i%i%i%i%i%i%i%i%i%i%i%i%i%i",
- BitStream[i],
- BitStream[i+1],
- BitStream[i+2],
- BitStream[i+3],
- BitStream[i+4],
- BitStream[i+5],
- BitStream[i+6],
- BitStream[i+7],
- BitStream[i+8],
- BitStream[i+9],
- BitStream[i+10],
- BitStream[i+11],
- BitStream[i+12],
- BitStream[i+13],
- BitStream[i+14],
- BitStream[i+15]);
- }
+ uint32_t i = 0;
+ if (bitLen<16) {
+ PrintAndLog("Too few bits found: %d",bitLen);
+ return;
+ }
+ if (bitLen>512) bitLen=512;
+
+ // ensure equally divided by 16
+ bitLen &= 0xfff0;
+
+
+ for (i = 0; i <= (bitLen-16); i+=16) {
+ PrintAndLog("%i%i%i%i%i%i%i%i%i%i%i%i%i%i%i%i",
+ BitStream[i],
+ BitStream[i+1],
+ BitStream[i+2],
+ BitStream[i+3],
+ BitStream[i+4],
+ BitStream[i+5],
+ BitStream[i+6],
+ BitStream[i+7],
+ BitStream[i+8],
+ BitStream[i+9],
+ BitStream[i+10],
+ BitStream[i+11],
+ BitStream[i+12],
+ BitStream[i+13],
+ BitStream[i+14],
+ BitStream[i+15]);
+ }
return;
}
//by marshmellow
-//print EM410x ID in multiple formats
+//print 64 bit EM410x ID in multiple formats
void printEM410x(uint64_t id)
{
if (id !=0){
- uint64_t iii=1;
- uint64_t id2lo=0; //id2hi=0,
- uint32_t ii=0;
- uint32_t i=0;
- for (ii=5; ii>0;ii--){
- for (i=0;i<8;i++){
- id2lo=(id2lo<<1LL) | ((id & (iii << (i+((ii-1)*8)))) >> (i+((ii-1)*8)));
- }
+ uint64_t iii=1;
+ uint64_t id2lo=0;
+ uint32_t ii=0;
+ uint32_t i=0;
+ for (ii=5; ii>0;ii--){
+ for (i=0;i<8;i++){
+ id2lo=(id2lo<<1LL) | ((id & (iii << (i+((ii-1)*8)))) >> (i+((ii-1)*8)));
}
- //output em id
- PrintAndLog("EM TAG ID : %010llx", id);
- PrintAndLog("Unique TAG ID: %010llx", id2lo); //id2hi,
- PrintAndLog("DEZ 8 : %08lld",id & 0xFFFFFF);
- PrintAndLog("DEZ 10 : %010lld",id & 0xFFFFFF);
- PrintAndLog("DEZ 5.5 : %05lld.%05lld",(id>>16LL) & 0xFFFF,(id & 0xFFFF));
- PrintAndLog("DEZ 3.5A : %03lld.%05lld",(id>>32ll),(id & 0xFFFF));
- PrintAndLog("DEZ 14/IK2 : %014lld",id);
- PrintAndLog("DEZ 15/IK3 : %015lld",id2lo);
- PrintAndLog("Other : %05lld_%03lld_%08lld",(id&0xFFFF),((id>>16LL) & 0xFF),(id & 0xFFFFFF));
- }
- return;
-}
-
-//by marshmellow
-//take binary from demod buffer and see if we can find an EM410x ID
-int CmdEm410xDecode(const char *Cmd)
-{
- uint64_t id=0;
- // uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- // uint32_t i=0;
- // i=getFromGraphBuf(BitStream);
- id = Em410xDecode(DemodBuffer,DemodBufferLen);
- printEM410x(id);
- if (id>0) return 1;
- return 0;
+ }
+ //output em id
+ PrintAndLog("EM TAG ID : %010llx", id);
+ PrintAndLog("Unique TAG ID: %010llx", id2lo);
+ PrintAndLog("DEZ 8 : %08lld",id & 0xFFFFFF);
+ PrintAndLog("DEZ 10 : %010lld",id & 0xFFFFFF);
+ PrintAndLog("DEZ 5.5 : %05lld.%05lld",(id>>16LL) & 0xFFFF,(id & 0xFFFF));
+ PrintAndLog("DEZ 3.5A : %03lld.%05lld",(id>>32ll),(id & 0xFFFF));
+ PrintAndLog("DEZ 14/IK2 : %014lld",id);
+ PrintAndLog("DEZ 15/IK3 : %015lld",id2lo);
+ PrintAndLog("Other : %05lld_%03lld_%08lld",(id&0xFFFF),((id>>16LL) & 0xFF),(id & 0xFFFFFF));
+ }
+ return;
}
-
//by marshmellow
-//takes 2 arguments - clock and invert both as integers
+//takes 3 arguments - clock, invert and maxErr as integers
//attempts to demodulate ask while decoding manchester
//prints binary found and saves in graphbuffer for further commands
-int Cmdaskmandemod(const char *Cmd)
+int CmdAskEM410xDemod(const char *Cmd)
{
- int invert=0;
- int clk=0;
+ int invert=0;
+ int clk=0;
+ int maxErr=100;
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data askem410xdemod [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data askem410xdemod = demod an EM410x Tag ID from GraphBuffer");
+ PrintAndLog(" : data askem410xdemod 32 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data askem410xdemod 32 1 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data askem410xdemod 1 = demod an EM410x Tag ID from GraphBuffer while inverting data");
+ PrintAndLog(" : data askem410xdemod 64 1 0 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/64 and inverting data and allowing 0 demod errors");
+
+ return 0;
+ }
+
+
uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- sscanf(Cmd, "%i %i", &clk, &invert);
+ sscanf(Cmd, "%i %i %i", &clk, &invert, &maxErr);
if (invert != 0 && invert != 1) {
PrintAndLog("Invalid argument: %s", Cmd);
return 0;
}
+ size_t BitLen = getFromGraphBuf(BitStream);
- size_t BitLen = getFromGraphBuf(BitStream);
- // PrintAndLog("DEBUG: Bitlen from grphbuff: %d",BitLen);
+ if (g_debugMode==1) PrintAndLog("DEBUG: Bitlen from grphbuff: %d",BitLen);
+ if (BitLen==0) return 0;
int errCnt=0;
- errCnt = askmandemod(BitStream, &BitLen,&clk,&invert);
- if (errCnt<0||BitLen<16){ //if fatal error (or -1)
- // PrintAndLog("no data found %d, errors:%d, bitlen:%d, clock:%d",errCnt,invert,BitLen,clk);
+ errCnt = askmandemod(BitStream, &BitLen, &clk, &invert, maxErr);
+ if (errCnt<0||BitLen<16){ //if fatal error (or -1)
+ if (g_debugMode==1) PrintAndLog("no data found %d, errors:%d, bitlen:%d, clock:%d",errCnt,invert,BitLen,clk);
return 0;
- }
+ }
PrintAndLog("\nUsing Clock: %d - Invert: %d - Bits Found: %d",clk,invert,BitLen);
//output
if (errCnt>0){
PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
}
- PrintAndLog("ASK/Manchester decoded bitstream:");
+ //PrintAndLog("ASK/Manchester decoded bitstream:");
// Now output the bitstream to the scrollback by line of 16 bits
- setDemodBuf(BitStream,BitLen);
- printDemodBuff();
+ setDemodBuf(BitStream,BitLen,0);
+ //printDemodBuff();
uint64_t lo =0;
- lo = Em410xDecode(BitStream,BitLen);
+ size_t idx=0;
+ lo = Em410xDecode(BitStream, &BitLen, &idx);
if (lo>0){
//set GraphBuffer for clone or sim command
+ setDemodBuf(BitStream, BitLen, idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, BitLen);
+ printDemodBuff();
+ }
PrintAndLog("EM410x pattern found: ");
+ if (BitLen > 64) PrintAndLog("\nWarning! Length not what is expected - Length: %d bits\n",BitLen);
printEM410x(lo);
return 1;
}
- //if (BitLen>16) return 1;
return 0;
}
+int ASKmanDemod(const char *Cmd, bool verbose, bool emSearch)
+{
+ int invert=0;
+ int clk=0;
+ int maxErr=100;
+
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ sscanf(Cmd, "%i %i %i", &clk, &invert, &maxErr);
+ if (invert != 0 && invert != 1) {
+ PrintAndLog("Invalid argument: %s", Cmd);
+ return 0;
+ }
+ if (clk==1){
+ invert=1;
+ clk=0;
+ }
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (g_debugMode==1) PrintAndLog("DEBUG: Bitlen from grphbuff: %d",BitLen);
+ if (BitLen==0) return 0;
+ int errCnt=0;
+ errCnt = askmandemod(BitStream, &BitLen, &clk, &invert, maxErr);
+ if (errCnt<0||BitLen<16){ //if fatal error (or -1)
+ if (g_debugMode==1) PrintAndLog("no data found %d, errors:%d, bitlen:%d, clock:%d",errCnt,invert,BitLen,clk);
+ return 0;
+ }
+ if (verbose) PrintAndLog("\nUsing Clock: %d - Invert: %d - Bits Found: %d",clk,invert,BitLen);
+
+ //output
+ if (errCnt>0){
+ if (verbose) PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
+ }
+ if (verbose) PrintAndLog("ASK/Manchester decoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ setDemodBuf(BitStream,BitLen,0);
+ if (verbose) printDemodBuff();
+ uint64_t lo =0;
+ size_t idx=0;
+ if (emSearch){
+ lo = Em410xDecode(BitStream, &BitLen, &idx);
+ if (lo>0){
+ //set GraphBuffer for clone or sim command
+ setDemodBuf(BitStream, BitLen, idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, BitLen);
+ printDemodBuff();
+ }
+ if (verbose) PrintAndLog("EM410x pattern found: ");
+ if (verbose) printEM410x(lo);
+ return 1;
+ }
+ }
+ return 1;
+}
+
+//by marshmellow
+//takes 3 arguments - clock, invert, maxErr as integers
+//attempts to demodulate ask while decoding manchester
+//prints binary found and saves in graphbuffer for further commands
+int Cmdaskmandemod(const char *Cmd)
+{
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data rawdemod am [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod am = demod an ask/manchester tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod am 32 = demod an ask/manchester tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod am 32 1 = demod an ask/manchester tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod am 1 = demod an ask/manchester tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod am 64 1 0 = demod an ask/manchester tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ return 0;
+ }
+ return ASKmanDemod(Cmd, TRUE, TRUE);
+}
+
//by marshmellow
//manchester decode
//stricktly take 10 and 01 and convert to 0 and 1
{
int i =0;
int errCnt=0;
- size_t size=0;
+ size_t size=0;
+ size_t maxErr = 20;
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data manrawdecode");
+ PrintAndLog(" Takes 10 and 01 and converts to 0 and 1 respectively");
+ PrintAndLog(" --must have binary sequence in demodbuffer (run data askrawdemod first)");
+ PrintAndLog("");
+ PrintAndLog(" sample: data manrawdecode = decode manchester bitstream from the demodbuffer");
+ return 0;
+ }
+ if (DemodBufferLen==0) return 0;
uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
int high=0,low=0;
- for (;i<DemodBufferLen;++i){
- if (DemodBuffer[i]>high) high=DemodBuffer[i];
- else if(DemodBuffer[i]<low) low=DemodBuffer[i];
- BitStream[i]=DemodBuffer[i];
+ for (;i<DemodBufferLen;++i){
+ if (DemodBuffer[i]>high) high=DemodBuffer[i];
+ else if(DemodBuffer[i]<low) low=DemodBuffer[i];
+ BitStream[i]=DemodBuffer[i];
}
if (high>1 || low <0 ){
PrintAndLog("Error: please raw demod the wave first then mancheseter raw decode");
return 0;
}
- size=i;
- errCnt=manrawdecode(BitStream, &size);
- if (errCnt>=20){
+ size=i;
+ errCnt=manrawdecode(BitStream, &size);
+ if (errCnt>=maxErr){
PrintAndLog("Too many errors: %d",errCnt);
return 0;
}
PrintAndLog("Manchester Decoded - # errors:%d - data:",errCnt);
- printBitStream(BitStream, size);
+ printBitStream(BitStream, size);
if (errCnt==0){
- uint64_t id = 0;
- id = Em410xDecode(BitStream, size);
- if (id>0) setDemodBuf(BitStream, size);
- printEM410x(id);
+ uint64_t id = 0;
+ size_t idx=0;
+ id = Em410xDecode(BitStream, &size, &idx);
+ if (id>0){
+ //need to adjust to set bitstream back to manchester encoded data
+ //setDemodBuf(BitStream, size, idx);
+
+ printEM410x(id);
+ }
}
return 1;
}
//by marshmellow
//biphase decode
//take 01 or 10 = 0 and 11 or 00 = 1
-//takes 1 argument "offset" default = 0 if 1 it will shift the decode by one bit
+//takes 2 arguments "offset" default = 0 if 1 it will shift the decode by one bit
+// and "invert" default = 0 if 1 it will invert output
// since it is not like manchester and doesn't have an incorrect bit pattern we
// cannot determine if our decode is correct or if it should be shifted by one bit
// the argument offset allows us to manually shift if the output is incorrect
// width waves vs small width waves to help the decode positioning) or askbiphdemod
int CmdBiphaseDecodeRaw(const char *Cmd)
{
- int i = 0;
- int errCnt=0;
+ int i = 0;
+ int errCnt=0;
size_t size=0;
- int offset=0;
- int high=0, low=0;
- sscanf(Cmd, "%i", &offset);
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- //get graphbuffer & high and low
+ int offset=0;
+ int invert=0;
+ int high=0, low=0;
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 3 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data biphaserawdecode [offset] <invert>");
+ PrintAndLog(" Converts 10 or 01 to 0 and 11 or 00 to 1");
+ PrintAndLog(" --must have binary sequence in demodbuffer (run data askrawdemod first)");
+ PrintAndLog("");
+ PrintAndLog(" [offset <0|1>], set to 0 not to adjust start position or to 1 to adjust decode start position");
+ PrintAndLog(" [invert <0|1>], set to 1 to invert output");
+ PrintAndLog("");
+ PrintAndLog(" sample: data biphaserawdecode = decode biphase bitstream from the demodbuffer");
+ PrintAndLog(" sample: data biphaserawdecode 1 1 = decode biphase bitstream from the demodbuffer, set offset, and invert output");
+ return 0;
+ }
+ sscanf(Cmd, "%i %i", &offset, &invert);
+ if (DemodBufferLen==0) return 0;
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ //get graphbuffer & high and low
for (;i<DemodBufferLen;++i){
if(DemodBuffer[i]>high)high=DemodBuffer[i];
else if(DemodBuffer[i]<low)low=DemodBuffer[i];
BitStream[i]=DemodBuffer[i];
- }
- if (high>1 || low <0){
- PrintAndLog("Error: please raw demod the wave first then decode");
- return 0;
- }
+ }
+ if (high>1 || low <0){
+ PrintAndLog("Error: please raw demod the wave first then decode");
+ return 0;
+ }
size=i;
- errCnt=BiphaseRawDecode(BitStream, &size, offset);
- if (errCnt>=20){
- PrintAndLog("Too many errors attempting to decode: %d",errCnt);
- return 0;
- }
- PrintAndLog("Biphase Decoded using offset: %d - # errors:%d - data:",offset,errCnt);
+ errCnt=BiphaseRawDecode(BitStream, &size, offset, invert);
+ if (errCnt>=20){
+ PrintAndLog("Too many errors attempting to decode: %d",errCnt);
+ return 0;
+ }
+ PrintAndLog("Biphase Decoded using offset: %d - # errors:%d - data:",offset,errCnt);
printBitStream(BitStream, size);
- PrintAndLog("\nif bitstream does not look right try offset=1");
- return 1;
+ PrintAndLog("\nif bitstream does not look right try offset=1");
+ if (offset == 1) setDemodBuf(DemodBuffer,DemodBufferLen-1,1); //remove first bit from raw demod
+ return 1;
}
-
+// set demod buffer back to raw after biphase demod
+void setBiphaseDemodBuf(uint8_t *BitStream, size_t size)
+{
+ uint8_t rawStream[512]={0x00};
+ size_t i=0;
+ uint8_t curPhase=0;
+ if (size > 256) {
+ PrintAndLog("ERROR - Biphase Demod Buffer overrun");
+ return;
+ }
+ for (size_t idx=0; idx<size; idx++){
+ if(!BitStream[idx]){
+ rawStream[i++] = curPhase;
+ rawStream[i++] = curPhase;
+ curPhase ^= 1;
+ } else {
+ rawStream[i++] = curPhase;
+ rawStream[i++] = curPhase ^ 1;
+ }
+ }
+ setDemodBuf(rawStream,i,0);
+ return;
+}
//by marshmellow
-//takes 2 arguments - clock and invert both as integers
+//takes 4 arguments - clock, invert, maxErr as integers and amplify as char
//attempts to demodulate ask only
//prints binary found and saves in graphbuffer for further commands
-int Cmdaskrawdemod(const char *Cmd)
+int ASKrawDemod(const char *Cmd, bool verbose)
{
- int invert=0;
- int clk=0;
+ int invert=0;
+ int clk=0;
+ int maxErr=100;
+ uint8_t askAmp = 0;
+ char amp = param_getchar(Cmd, 0);
uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- sscanf(Cmd, "%i %i", &clk, &invert);
+ sscanf(Cmd, "%i %i %i %c", &clk, &invert, &maxErr, &);
if (invert != 0 && invert != 1) {
- PrintAndLog("Invalid argument: %s", Cmd);
+ if (verbose) PrintAndLog("Invalid argument: %s", Cmd);
return 0;
}
- size_t BitLen = getFromGraphBuf(BitStream);
+ if (clk==1){
+ invert=1;
+ clk=0;
+ }
+ if (amp == 'a' || amp == 'A') askAmp=1;
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return 0;
int errCnt=0;
- errCnt = askrawdemod(BitStream, &BitLen,&clk,&invert);
- if (errCnt==-1||BitLen<16){ //throw away static - allow 1 and -1 (in case of threshold command first)
- PrintAndLog("no data found");
+ errCnt = askrawdemod(BitStream, &BitLen, &clk, &invert, maxErr, askAmp);
+ if (errCnt==-1||BitLen<16){ //throw away static - allow 1 and -1 (in case of threshold command first)
+ if (verbose) PrintAndLog("no data found");
+ if (g_debugMode==1 && verbose) PrintAndLog("errCnt: %d, BitLen: %d, clk: %d, invert: %d", errCnt, BitLen, clk, invert);
return 0;
- }
- PrintAndLog("Using Clock: %d - invert: %d - Bits Found: %d",clk,invert,BitLen);
- //PrintAndLog("Data start pos:%d, lastBit:%d, stop pos:%d, numBits:%d",iii,lastBit,i,bitnum);
- //move BitStream back to DemodBuffer
- setDemodBuf(BitStream,BitLen);
+ }
+ if (verbose) PrintAndLog("Using Clock: %d - invert: %d - Bits Found: %d", clk, invert, BitLen);
+
+ //move BitStream back to DemodBuffer
+ setDemodBuf(BitStream,BitLen,0);
- //output
- if (errCnt>0){
- PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
+ //output
+ if (errCnt>0 && verbose){
+ PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d", errCnt);
}
- PrintAndLog("ASK demoded bitstream:");
- // Now output the bitstream to the scrollback by line of 16 bits
- printBitStream(BitStream,BitLen);
+ if (verbose){
+ PrintAndLog("ASK demoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ printBitStream(BitStream,BitLen);
+ }
+ return 1;
+}
+//by marshmellow
+//attempts to demodulate and identify a G_Prox_II verex/chubb card
+//WARNING: if it fails during some points it will destroy the DemodBuffer data
+// but will leave the GraphBuffer intact.
+//if successful it will push askraw data back to demod buffer ready for emulation
+int CmdG_Prox_II_Demod(const char *Cmd)
+{
+ int ans = ASKrawDemod(Cmd, FALSE);
+ if (ans <= 0) {
+ if (g_debugMode) PrintAndLog("Error AskrawDemod: %d",ans);
+ return ans;
+ }
+ size_t size = DemodBufferLen;
+ ans = BiphaseRawDecode(DemodBuffer, &size, 0, 0);
+ if (ans !=0) {
+ if (g_debugMode) PrintAndLog("Error BiphaseRawDecode: %d",ans);
+ return ans;
+ }
+ //call lfdemod.c demod for gProxII
+ ans = gProxII_Demod(DemodBuffer, &size);
+ if (ans < 0){
+ if (g_debugMode) PrintAndLog("Error gProxII_Demod 1st Try: %d",ans);
+ //try biphase again
+ ans = BiphaseRawDecode(DemodBuffer, &size, 1, 0);
+ if (ans != 0) {
+ if (g_debugMode) PrintAndLog("Error BiphaseRawDecode: %d",ans);
+ return ans;
+ }
+ ans = gProxII_Demod(DemodBuffer, &size);
+ if (ans < 0) {
+ if (g_debugMode) PrintAndLog("Error gProxII_Demod 1st Try: %d",ans);
+ return ans;
+ }
+ }
+ //got a good demod
+ uint32_t ByteStream[65] = {0x00};
+ uint8_t xorKey=0;
+ uint8_t keyCnt=0;
+ uint8_t bitCnt=0;
+ uint8_t ByteCnt=0;
+ size_t startIdx = ans + 6; //start after preamble
+ for (size_t idx = 0; idx<size-6; idx++){
+ if ((idx+1) % 5 == 0){
+ //spacer bit - should be 0
+ if (DemodBuffer[startIdx+idx] != 0) {
+ if (g_debugMode) PrintAndLog("Error spacer not 0: %d, pos: %d",DemodBuffer[startIdx+idx],startIdx+idx);
+ return -1;
+ }
+ continue;
+ }
+ if (keyCnt<8){ //lsb first
+ xorKey = xorKey | (DemodBuffer[startIdx+idx]<<keyCnt);
+ keyCnt++;
+ if (keyCnt==8 && g_debugMode) PrintAndLog("xorKey Found: %02x", xorKey);
+ continue;
+ }
+ //lsb first
+ ByteStream[ByteCnt] = ByteStream[ByteCnt] | (DemodBuffer[startIdx+idx]<<bitCnt);
+ bitCnt++;
+ if (bitCnt % 8 == 0){
+ if (g_debugMode) PrintAndLog("byte %d: %02x",ByteCnt,ByteStream[ByteCnt]);
+ bitCnt=0;
+ ByteCnt++;
+ }
+ }
+ for (uint8_t i = 0; i < ByteCnt; i++){
+ ByteStream[i] ^= xorKey; //xor
+ if (g_debugMode) PrintAndLog("byte %d after xor: %02x", i, ByteStream[i]);
+ }
+ //now ByteStream contains 64 bytes of decrypted raw tag data
+ //
+ uint8_t fmtLen = ByteStream[0]>>2;
+ uint32_t FC = 0;
+ uint32_t Card = 0;
+ uint32_t raw1 = bytebits_to_byte(DemodBuffer+ans,32);
+ uint32_t raw2 = bytebits_to_byte(DemodBuffer+ans+32, 32);
+ uint32_t raw3 = bytebits_to_byte(DemodBuffer+ans+64, 32);
+
+ if (fmtLen==36){
+ FC = ((ByteStream[3] & 0x7F)<<7) | (ByteStream[4]>>1);
+ Card = ((ByteStream[4]&1)<<19) | (ByteStream[5]<<11) | (ByteStream[6]<<3) | (ByteStream[7]>>5);
+ PrintAndLog("G-Prox-II Found: FmtLen %d, FC %d, Card %d",fmtLen,FC,Card);
+ } else if(fmtLen==26){
+ FC = ((ByteStream[3] & 0x7F)<<1) | (ByteStream[4]>>7);
+ Card = ((ByteStream[4]&0x7F)<<9) | (ByteStream[5]<<1) | (ByteStream[6]>>7);
+ PrintAndLog("G-Prox-II Found: FmtLen %d, FC %d, Card %d",fmtLen,FC,Card);
+ } else {
+ PrintAndLog("Unknown G-Prox-II Fmt Found: FmtLen %d",fmtLen);
+ }
+ PrintAndLog("Raw: %08x%08x%08x", raw1,raw2,raw3);
+ setBiphaseDemodBuf(DemodBuffer+ans, 96);
return 1;
}
+//by marshmellow - see ASKrawDemod
+int Cmdaskrawdemod(const char *Cmd)
+{
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 12 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data rawdemod ar [clock] <invert> [maxError] [amplify]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect");
+ PrintAndLog(" <invert>, 1 to invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100");
+ PrintAndLog(" <amplify>, 'a' to attempt demod with ask amplification, default = no amp");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod ar = demod an ask tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod ar a = demod an ask tag from GraphBuffer, amplified");
+ PrintAndLog(" : data rawdemod ar 32 = demod an ask tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod ar 32 1 = demod an ask tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod ar 1 = demod an ask tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod ar 64 1 0 = demod an ask tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ PrintAndLog(" : data rawdemod ar 64 1 0 a = demod an ask tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors, and amp");
+ return 0;
+ }
+ return ASKrawDemod(Cmd, TRUE);
+}
+
int CmdAutoCorr(const char *Cmd)
{
static int CorrelBuffer[MAX_GRAPH_TRACE_LEN];
}
/* Get our clock */
- clock = GetClock(Cmd, high, 1);
+ clock = GetAskClock(Cmd, high, 1);
gtl = ClearGraph(0);
bit = 0;
bit ^= 1;
AppendGraph(0, clock, bit);
- // for (j = 0; j < (int)(clock/2); j++)
- // GraphBuffer[(i * clock) + j] = bit ^ 1;
- // for (j = (int)(clock/2); j < clock; j++)
- // GraphBuffer[(i * clock) + j] = bit;
}
RepaintGraphWindow();
*/
int CmdUndec(const char *Cmd)
{
+ if(param_getchar(Cmd, 0) == 'h')
+ {
+ PrintAndLog("Usage: data undec [factor]");
+ PrintAndLog("This function performs un-decimation, by repeating each sample N times");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" factor The number of times to repeat each sample.[default:2]");
+ PrintAndLog("Example: 'data undec 3'");
+ return 0;
+ }
+
+ uint8_t factor = param_get8ex(Cmd, 0,2, 10);
//We have memory, don't we?
int swap[MAX_GRAPH_TRACE_LEN] = { 0 };
- uint32_t i = 0 ,j = 0;
- while(j+1 < MAX_GRAPH_TRACE_LEN && i < GraphTraceLen)
+ uint32_t g_index = 0 ,s_index = 0;
+ while(g_index < GraphTraceLen && s_index < MAX_GRAPH_TRACE_LEN)
{
- swap[j] = GraphBuffer[i];
- swap[j+1] = GraphBuffer[i];
- i++;
- j+=2;
+ int count = 0;
+ for(count = 0; count < factor && s_index+count < MAX_GRAPH_TRACE_LEN; count ++)
+ swap[s_index+count] = GraphBuffer[g_index];
+ s_index+=count;
}
- memcpy(GraphBuffer,swap, j);
- GraphTraceLen = j;
- PrintAndLog("Undecimated by 2");
- RepaintGraphWindow();
- /*
- * Something is not right here, need to look into it,
- * the undec seems to only operate on half the values **/
+ memcpy(GraphBuffer,swap, s_index * sizeof(int));
+ GraphTraceLen = s_index;
+ RepaintGraphWindow();
return 0;
}
+//by marshmellow
+//shift graph zero up or down based on input + or -
+int CmdGraphShiftZero(const char *Cmd)
+{
+
+ int shift=0;
+ //set options from parameters entered with the command
+ sscanf(Cmd, "%i", &shift);
+ int shiftedVal=0;
+ for(int i = 0; i<GraphTraceLen; i++){
+ shiftedVal=GraphBuffer[i]+shift;
+ if (shiftedVal>127)
+ shiftedVal=127;
+ else if (shiftedVal<-127)
+ shiftedVal=-127;
+ GraphBuffer[i]= shiftedVal;
+ }
+ CmdNorm("");
+ return 0;
+}
+
+//by marshmellow
+//use large jumps in read samples to identify edges of waves and then amplify that wave to max
+//similar to dirtheshold, threshold, and askdemod commands
+//takes a threshold length which is the measured length between two samples then determines an edge
+int CmdAskEdgeDetect(const char *Cmd)
+{
+ int thresLen = 25;
+ sscanf(Cmd, "%i", &thresLen);
+ int shift = 127;
+ int shiftedVal=0;
+ for(int i = 1; i<GraphTraceLen; i++){
+ if (GraphBuffer[i]-GraphBuffer[i-1]>=thresLen) //large jump up
+ shift=127;
+ else if(GraphBuffer[i]-GraphBuffer[i-1]<=-1*thresLen) //large jump down
+ shift=-127;
+
+ shiftedVal=GraphBuffer[i]+shift;
+
+ if (shiftedVal>127)
+ shiftedVal=127;
+ else if (shiftedVal<-127)
+ shiftedVal=-127;
+ GraphBuffer[i-1] = shiftedVal;
+ }
+ RepaintGraphWindow();
+ //CmdNorm("");
+ return 0;
+}
+
/* Print our clock rate */
// uses data from graphbuffer
+// adjusted to take char parameter for type of modulation to find the clock - by marshmellow.
int CmdDetectClockRate(const char *Cmd)
{
- GetClock("",0,0);
- //int clock = DetectASKClock(0);
- //PrintAndLog("Auto-detected clock rate: %d", clock);
- return 0;
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 3 || strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data detectclock [modulation]");
+ PrintAndLog(" [modulation as char], specify the modulation type you want to detect the clock of");
+ PrintAndLog(" 'a' = ask, 'f' = fsk, 'n' = nrz/direct, 'p' = psk");
+ PrintAndLog("");
+ PrintAndLog(" sample: data detectclock a = detect the clock of an ask modulated wave in the GraphBuffer");
+ PrintAndLog(" data detectclock f = detect the clock of an fsk modulated wave in the GraphBuffer");
+ PrintAndLog(" data detectclock p = detect the clock of an psk modulated wave in the GraphBuffer");
+ PrintAndLog(" data detectclock n = detect the clock of an nrz/direct modulated wave in the GraphBuffer");
+ }
+ int ans=0;
+ if (cmdp == 'a'){
+ ans = GetAskClock("", true, false);
+ } else if (cmdp == 'f'){
+ ans = GetFskClock("", true, false);
+ } else if (cmdp == 'n'){
+ ans = GetNrzClock("", true, false);
+ } else if (cmdp == 'p'){
+ ans = GetPskClock("", true, false);
+ } else {
+ PrintAndLog ("Please specify a valid modulation to detect the clock of - see option h for help");
+ }
+ return ans;
}
//by marshmellow
//fsk raw demod and print binary
-//takes 4 arguments - Clock, invert, rchigh, rclow
-//defaults: clock = 50, invert=0, rchigh=10, rclow=8 (RF/10 RF/8 (fsk2a))
-int CmdFSKrawdemod(const char *Cmd)
+//takes 4 arguments - Clock, invert, fchigh, fclow
+//defaults: clock = 50, invert=1, fchigh=10, fclow=8 (RF/10 RF/8 (fsk2a))
+int FSKrawDemod(const char *Cmd, bool verbose)
{
//raw fsk demod no manchester decoding no start bit finding just get binary from wave
//set defaults
- int rfLen = 50;
- int invert=0;
- int fchigh=10;
- int fclow=8;
+ int rfLen = 0;
+ int invert = 0;
+ int fchigh = 0;
+ int fclow = 0;
+
//set options from parameters entered with the command
- sscanf(Cmd, "%i %i %i %i", &rfLen, &invert, &fchigh, &fclow);
+ sscanf(Cmd, "%i %i %i %i", &rfLen, &invert, &fchigh, &fclow);
if (strlen(Cmd)>0 && strlen(Cmd)<=2) {
- //rfLen=param_get8(Cmd, 0); //if rfLen option only is used
if (rfLen==1){
invert=1; //if invert option only is used
- rfLen = 50;
- } else if(rfLen==0) rfLen=50;
- }
- PrintAndLog("Args invert: %d - Clock:%d - fchigh:%d - fclow: %d",invert,rfLen,fchigh, fclow);
+ rfLen = 0;
+ }
+ }
+
uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t BitLen = getFromGraphBuf(BitStream);
- int size = fskdemod(BitStream,BitLen,(uint8_t)rfLen,(uint8_t)invert,(uint8_t)fchigh,(uint8_t)fclow);
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return 0;
+ //get field clock lengths
+ uint16_t fcs=0;
+ uint8_t dummy=0;
+ if (fchigh==0 || fclow == 0){
+ fcs = countFC(BitStream, BitLen, &dummy);
+ if (fcs==0){
+ fchigh=10;
+ fclow=8;
+ }else{
+ fchigh = (fcs >> 8) & 0xFF;
+ fclow = fcs & 0xFF;
+ }
+ }
+ //get bit clock length
+ if (rfLen==0){
+ rfLen = detectFSKClk(BitStream, BitLen, fchigh, fclow);
+ if (rfLen == 0) rfLen = 50;
+ }
+ if (verbose) PrintAndLog("Args invert: %d - Clock:%d - fchigh:%d - fclow: %d",invert,rfLen,fchigh, fclow);
+ int size = fskdemod(BitStream,BitLen,(uint8_t)rfLen,(uint8_t)invert,(uint8_t)fchigh,(uint8_t)fclow);
if (size>0){
- PrintAndLog("FSK decoded bitstream:");
- setDemodBuf(BitStream,size);
+ setDemodBuf(BitStream,size,0);
// Now output the bitstream to the scrollback by line of 16 bits
if(size > (8*32)+2) size = (8*32)+2; //only output a max of 8 blocks of 32 bits most tags will have full bit stream inside that sample size
- printBitStream(BitStream,size);
+ if (verbose) {
+ PrintAndLog("FSK decoded bitstream:");
+ printBitStream(BitStream,size);
+ }
+
+ return 1;
} else{
- PrintAndLog("no FSK data found");
+ if (verbose) PrintAndLog("no FSK data found");
}
return 0;
}
+//by marshmellow
+//fsk raw demod and print binary
+//takes 4 arguments - Clock, invert, fchigh, fclow
+//defaults: clock = 50, invert=1, fchigh=10, fclow=8 (RF/10 RF/8 (fsk2a))
+int CmdFSKrawdemod(const char *Cmd)
+{
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data rawdemod fs [clock] <invert> [fchigh] [fclow]");
+ PrintAndLog(" [set clock as integer] optional, omit for autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output, can be used even if the clock is omitted");
+ PrintAndLog(" [fchigh], larger field clock length, omit for autodetect");
+ PrintAndLog(" [fclow], small field clock length, omit for autodetect");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod fs = demod an fsk tag from GraphBuffer using autodetect");
+ PrintAndLog(" : data rawdemod fs 32 = demod an fsk tag from GraphBuffer using a clock of RF/32, autodetect fc");
+ PrintAndLog(" : data rawdemod fs 1 = demod an fsk tag from GraphBuffer using autodetect, invert output");
+ PrintAndLog(" : data rawdemod fs 32 1 = demod an fsk tag from GraphBuffer using a clock of RF/32, invert output, autodetect fc");
+ PrintAndLog(" : data rawdemod fs 64 0 8 5 = demod an fsk1 RF/64 tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod fs 50 0 10 8 = demod an fsk2 RF/50 tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod fs 50 1 10 8 = demod an fsk2a RF/50 tag from GraphBuffer");
+ return 0;
+ }
+ return FSKrawDemod(Cmd, TRUE);
+}
+
//by marshmellow (based on existing demod + holiman's refactor)
//HID Prox demod - FSK RF/50 with preamble of 00011101 (then manchester encoded)
//print full HID Prox ID and some bit format details if found
uint32_t hi2=0, hi=0, lo=0;
uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t BitLen = getFromGraphBuf(BitStream);
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return 0;
//get binary from fsk wave
- size_t size = HIDdemodFSK(BitStream,BitLen,&hi2,&hi,&lo);
- if (size<0){
- PrintAndLog("Error demoding fsk");
+ int idx = HIDdemodFSK(BitStream,&BitLen,&hi2,&hi,&lo);
+ if (idx<0){
+ if (g_debugMode){
+ if (idx==-1){
+ PrintAndLog("DEBUG: Just Noise Detected");
+ } else if (idx == -2) {
+ PrintAndLog("DEBUG: Error demoding fsk");
+ } else if (idx == -3) {
+ PrintAndLog("DEBUG: Preamble not found");
+ } else if (idx == -4) {
+ PrintAndLog("DEBUG: Error in Manchester data, SIZE: %d", BitLen);
+ } else {
+ PrintAndLog("DEBUG: Error demoding fsk %d", idx);
+ }
+ }
+ return 0;
+ }
+ if (hi2==0 && hi==0 && lo==0) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - no values found");
return 0;
}
- if (hi2==0 && hi==0 && lo==0) return 0;
if (hi2 != 0){ //extra large HID tags
- PrintAndLog("HID Prox TAG ID: %x%08x%08x (%d)",
+ PrintAndLog("HID Prox TAG ID: %x%08x%08x (%d)",
(unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
- setDemodBuf(BitStream,BitLen);
- return 1;
}
else { //standard HID tags <38 bits
- //Dbprintf("TAG ID: %x%08x (%d)",(unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); //old print cmd
uint8_t fmtLen = 0;
uint32_t fc = 0;
uint32_t cardnum = 0;
lo2=lo2>>1;
idx3++;
}
- fmtLen =idx3+19;
+ fmtLen =idx3+19;
fc =0;
cardnum=0;
if(fmtLen==26){
cardnum = (lo>>1)&0x7FFFF;
fc = ((hi&0xF)<<12)|(lo>>20);
}
- }
- PrintAndLog("HID Prox TAG ID: %x%08x (%d) - Format Len: %dbit - FC: %d - Card: %d",
+ }
+ PrintAndLog("HID Prox TAG ID: %x%08x (%d) - Format Len: %dbit - FC: %d - Card: %d",
(unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF,
(unsigned int) fmtLen, (unsigned int) fc, (unsigned int) cardnum);
- setDemodBuf(BitStream,BitLen);
- return 1;
}
- return 0;
+ setDemodBuf(BitStream,BitLen,idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, BitLen);
+ printDemodBuff();
+ }
+ return 1;
+}
+
+//by marshmellow
+//Paradox Prox demod - FSK RF/50 with preamble of 00001111 (then manchester encoded)
+//print full Paradox Prox ID and some bit format details if found
+int CmdFSKdemodParadox(const char *Cmd)
+{
+ //raw fsk demod no manchester decoding no start bit finding just get binary from wave
+ uint32_t hi2=0, hi=0, lo=0;
+
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return 0;
+ //get binary from fsk wave
+ int idx = ParadoxdemodFSK(BitStream,&BitLen,&hi2,&hi,&lo);
+ if (idx<0){
+ if (g_debugMode){
+ if (idx==-1){
+ PrintAndLog("DEBUG: Just Noise Detected");
+ } else if (idx == -2) {
+ PrintAndLog("DEBUG: Error demoding fsk");
+ } else if (idx == -3) {
+ PrintAndLog("DEBUG: Preamble not found");
+ } else if (idx == -4) {
+ PrintAndLog("DEBUG: Error in Manchester data");
+ } else {
+ PrintAndLog("DEBUG: Error demoding fsk %d", idx);
+ }
+ }
+ return 0;
+ }
+ if (hi2==0 && hi==0 && lo==0){
+ if (g_debugMode) PrintAndLog("DEBUG: Error - no value found");
+ return 0;
+ }
+ uint32_t fc = ((hi & 0x3)<<6) | (lo>>26);
+ uint32_t cardnum = (lo>>10)&0xFFFF;
+ uint32_t rawLo = bytebits_to_byte(BitStream+idx+64,32);
+ uint32_t rawHi = bytebits_to_byte(BitStream+idx+32,32);
+ uint32_t rawHi2 = bytebits_to_byte(BitStream+idx,32);
+
+ PrintAndLog("Paradox TAG ID: %x%08x - FC: %d - Card: %d - Checksum: %02x - RAW: %08x%08x%08x",
+ hi>>10, (hi & 0x3)<<26 | (lo>>10), fc, cardnum, (lo>>2) & 0xFF, rawHi2, rawHi, rawLo);
+ setDemodBuf(BitStream,BitLen,idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, len: %d, Printing Demod Buffer:", idx, BitLen);
+ printDemodBuff();
+ }
+ return 1;
}
//by marshmellow
{
//raw fsk demod no manchester decoding no start bit finding just get binary from wave
//set defaults
- int idx=0;
- //something in graphbuffer
- if (GraphTraceLen < 65) return 0;
+ int idx=0;
+ //something in graphbuffer?
+ if (GraphTraceLen < 65) {
+ if (g_debugMode)PrintAndLog("DEBUG: not enough samples in GraphBuffer");
+ return 0;
+ }
uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t BitLen = getFromGraphBuf(BitStream);
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return 0;
+
//get binary from fsk wave
- // PrintAndLog("DEBUG: got buff");
- idx = IOdemodFSK(BitStream,BitLen);
+ idx = IOdemodFSK(BitStream,BitLen);
if (idx<0){
- //PrintAndLog("Error demoding fsk");
+ if (g_debugMode){
+ if (idx==-1){
+ PrintAndLog("DEBUG: Just Noise Detected");
+ } else if (idx == -2) {
+ PrintAndLog("DEBUG: not enough samples");
+ } else if (idx == -3) {
+ PrintAndLog("DEBUG: error during fskdemod");
+ } else if (idx == -4) {
+ PrintAndLog("DEBUG: Preamble not found");
+ } else if (idx == -5) {
+ PrintAndLog("DEBUG: Separator bits not found");
+ } else {
+ PrintAndLog("DEBUG: Error demoding fsk %d", idx);
+ }
+ }
return 0;
}
- // PrintAndLog("DEBUG: Got IOdemodFSK");
if (idx==0){
- //PrintAndLog("IO Prox Data not found - FSK Data:");
- //if (BitLen > 92) printBitStream(BitStream,92);
+ if (g_debugMode==1){
+ PrintAndLog("DEBUG: IO Prox Data not found - FSK Bits: %d",BitLen);
+ if (BitLen > 92) printBitStream(BitStream,92);
+ }
return 0;
}
//Index map
//
//XSF(version)facility:codeone+codetwo (raw)
//Handle the data
- if (idx+64>BitLen) return 0;
+ if (idx+64>BitLen) {
+ if (g_debugMode==1) PrintAndLog("not enough bits found - bitlen: %d",BitLen);
+ return 0;
+ }
PrintAndLog("%d%d%d%d%d%d%d%d %d",BitStream[idx], BitStream[idx+1], BitStream[idx+2], BitStream[idx+3], BitStream[idx+4], BitStream[idx+5], BitStream[idx+6], BitStream[idx+7], BitStream[idx+8]);
- PrintAndLog("%d%d%d%d%d%d%d%d %d",BitStream[idx+9], BitStream[idx+10], BitStream[idx+11],BitStream[idx+12],BitStream[idx+13],BitStream[idx+14],BitStream[idx+15],BitStream[idx+16],BitStream[idx+17]);
+ PrintAndLog("%d%d%d%d%d%d%d%d %d",BitStream[idx+9], BitStream[idx+10], BitStream[idx+11],BitStream[idx+12],BitStream[idx+13],BitStream[idx+14],BitStream[idx+15],BitStream[idx+16],BitStream[idx+17]);
PrintAndLog("%d%d%d%d%d%d%d%d %d facility",BitStream[idx+18], BitStream[idx+19], BitStream[idx+20],BitStream[idx+21],BitStream[idx+22],BitStream[idx+23],BitStream[idx+24],BitStream[idx+25],BitStream[idx+26]);
PrintAndLog("%d%d%d%d%d%d%d%d %d version",BitStream[idx+27], BitStream[idx+28], BitStream[idx+29],BitStream[idx+30],BitStream[idx+31],BitStream[idx+32],BitStream[idx+33],BitStream[idx+34],BitStream[idx+35]);
PrintAndLog("%d%d%d%d%d%d%d%d %d code1",BitStream[idx+36], BitStream[idx+37], BitStream[idx+38],BitStream[idx+39],BitStream[idx+40],BitStream[idx+41],BitStream[idx+42],BitStream[idx+43],BitStream[idx+44]);
PrintAndLog("%d%d%d%d%d%d%d%d %d%d checksum",BitStream[idx+54],BitStream[idx+55],BitStream[idx+56],BitStream[idx+57],BitStream[idx+58],BitStream[idx+59],BitStream[idx+60],BitStream[idx+61],BitStream[idx+62],BitStream[idx+63]);
uint32_t code = bytebits_to_byte(BitStream+idx,32);
- uint32_t code2 = bytebits_to_byte(BitStream+idx+32,32);
+ uint32_t code2 = bytebits_to_byte(BitStream+idx+32,32);
uint8_t version = bytebits_to_byte(BitStream+idx+27,8); //14,4
uint8_t facilitycode = bytebits_to_byte(BitStream+idx+18,8) ;
uint16_t number = (bytebits_to_byte(BitStream+idx+36,8)<<8)|(bytebits_to_byte(BitStream+idx+45,8)); //36,9
- PrintAndLog("IO Prox XSF(%02d)%02x:%05d (%08x%08x)",version,facilitycode,number,code,code2);
- int i;
- for (i=0;i<64;++i)
- DemodBuffer[i]=BitStream[idx++];
+ PrintAndLog("IO Prox XSF(%02d)%02x:%05d (%08x%08x)",version,facilitycode,number,code,code2);
+ setDemodBuf(BitStream,64,idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing demod buffer:",idx,64);
+ printDemodBuff();
+ }
+ return 1;
+}
+
+//by marshmellow
+//AWID Prox demod - FSK RF/50 with preamble of 00000001 (always a 96 bit data stream)
+//print full AWID Prox ID and some bit format details if found
+int CmdFSKdemodAWID(const char *Cmd)
+{
+
+ //int verbose=1;
+ //sscanf(Cmd, "%i", &verbose);
+
+ //raw fsk demod no manchester decoding no start bit finding just get binary from wave
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t size = getFromGraphBuf(BitStream);
+ if (size==0) return 0;
- DemodBufferLen=64;
+ //get binary from fsk wave
+ int idx = AWIDdemodFSK(BitStream, &size);
+ if (idx<=0){
+ if (g_debugMode==1){
+ if (idx == -1)
+ PrintAndLog("DEBUG: Error - not enough samples");
+ else if (idx == -2)
+ PrintAndLog("DEBUG: Error - only noise found");
+ else if (idx == -3)
+ PrintAndLog("DEBUG: Error - problem during FSK demod");
+ else if (idx == -4)
+ PrintAndLog("DEBUG: Error - AWID preamble not found");
+ else if (idx == -5)
+ PrintAndLog("DEBUG: Error - Size not correct: %d", size);
+ else
+ PrintAndLog("DEBUG: Error %d",idx);
+ }
+ return 0;
+ }
+
+ // Index map
+ // 0 10 20 30 40 50 60
+ // | | | | | | |
+ // 01234567 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 - to 96
+ // -----------------------------------------------------------------------------
+ // 00000001 000 1 110 1 101 1 011 1 101 1 010 0 000 1 000 1 010 0 001 0 110 1 100 0 000 1 000 1
+ // premable bbb o bbb o bbw o fff o fff o ffc o ccc o ccc o ccc o ccc o ccc o wxx o xxx o xxx o - to 96
+ // |---26 bit---| |-----117----||-------------142-------------|
+ // b = format bit len, o = odd parity of last 3 bits
+ // f = facility code, c = card number
+ // w = wiegand parity
+ // (26 bit format shown)
+
+ //get raw ID before removing parities
+ uint32_t rawLo = bytebits_to_byte(BitStream+idx+64,32);
+ uint32_t rawHi = bytebits_to_byte(BitStream+idx+32,32);
+ uint32_t rawHi2 = bytebits_to_byte(BitStream+idx,32);
+ setDemodBuf(BitStream,96,idx);
+
+ size = removeParity(BitStream, idx+8, 4, 1, 88);
+ if (size != 66){
+ if (g_debugMode==1) PrintAndLog("DEBUG: Error - at parity check-tag size does not match AWID format");
+ return 0;
+ }
+ // ok valid card found!
+
+ // Index map
+ // 0 10 20 30 40 50 60
+ // | | | | | | |
+ // 01234567 8 90123456 7890123456789012 3 456789012345678901234567890123456
+ // -----------------------------------------------------------------------------
+ // 00011010 1 01110101 0000000010001110 1 000000000000000000000000000000000
+ // bbbbbbbb w ffffffff cccccccccccccccc w xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+ // |26 bit| |-117--| |-----142------|
+ // b = format bit len, o = odd parity of last 3 bits
+ // f = facility code, c = card number
+ // w = wiegand parity
+ // (26 bit format shown)
+
+ uint32_t fc = 0;
+ uint32_t cardnum = 0;
+ uint32_t code1 = 0;
+ uint32_t code2 = 0;
+ uint8_t fmtLen = bytebits_to_byte(BitStream,8);
+ if (fmtLen==26){
+ fc = bytebits_to_byte(BitStream+9, 8);
+ cardnum = bytebits_to_byte(BitStream+17, 16);
+ code1 = bytebits_to_byte(BitStream+8,fmtLen);
+ PrintAndLog("AWID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi2, rawHi, rawLo);
+ } else {
+ cardnum = bytebits_to_byte(BitStream+8+(fmtLen-17), 16);
+ if (fmtLen>32){
+ code1 = bytebits_to_byte(BitStream+8,fmtLen-32);
+ code2 = bytebits_to_byte(BitStream+8+(fmtLen-32),32);
+ PrintAndLog("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x%08x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, code2, rawHi2, rawHi, rawLo);
+ } else{
+ code1 = bytebits_to_byte(BitStream+8,fmtLen);
+ PrintAndLog("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, rawHi2, rawHi, rawLo);
+ }
+ }
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d Printing Demod Buffer:", idx, 96);
+ printDemodBuff();
+ }
+ //todo - convert hi2, hi, lo to demodbuffer for future sim/clone commands
return 1;
}
+
+//by marshmellow
+//Pyramid Prox demod - FSK RF/50 with preamble of 0000000000000001 (always a 128 bit data stream)
+//print full Farpointe Data/Pyramid Prox ID and some bit format details if found
+int CmdFSKdemodPyramid(const char *Cmd)
+{
+ //raw fsk demod no manchester decoding no start bit finding just get binary from wave
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t size = getFromGraphBuf(BitStream);
+ if (size==0) return 0;
+
+ //get binary from fsk wave
+ int idx = PyramiddemodFSK(BitStream, &size);
+ if (idx < 0){
+ if (g_debugMode==1){
+ if (idx == -5)
+ PrintAndLog("DEBUG: Error - not enough samples");
+ else if (idx == -1)
+ PrintAndLog("DEBUG: Error - only noise found");
+ else if (idx == -2)
+ PrintAndLog("DEBUG: Error - problem during FSK demod");
+ else if (idx == -3)
+ PrintAndLog("DEBUG: Error - Size not correct: %d", size);
+ else if (idx == -4)
+ PrintAndLog("DEBUG: Error - Pyramid preamble not found");
+ else
+ PrintAndLog("DEBUG: Error - idx: %d",idx);
+ }
+ return 0;
+ }
+ // Index map
+ // 0 10 20 30 40 50 60
+ // | | | | | | |
+ // 0123456 7 8901234 5 6789012 3 4567890 1 2345678 9 0123456 7 8901234 5 6789012 3
+ // -----------------------------------------------------------------------------
+ // 0000000 0 0000000 1 0000000 1 0000000 1 0000000 1 0000000 1 0000000 1 0000000 1
+ // premable xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o
+
+ // 64 70 80 90 100 110 120
+ // | | | | | | |
+ // 4567890 1 2345678 9 0123456 7 8901234 5 6789012 3 4567890 1 2345678 9 0123456 7
+ // -----------------------------------------------------------------------------
+ // 0000000 1 0000000 1 0000000 1 0110111 0 0011000 1 0000001 0 0001100 1 1001010 0
+ // xxxxxxx o xxxxxxx o xxxxxxx o xswffff o ffffccc o ccccccc o ccccccw o ppppppp o
+ // |---115---||---------71---------|
+ // s = format start bit, o = odd parity of last 7 bits
+ // f = facility code, c = card number
+ // w = wiegand parity, x = extra space for other formats
+ // p = unknown checksum
+ // (26 bit format shown)
+
+ //get raw ID before removing parities
+ uint32_t rawLo = bytebits_to_byte(BitStream+idx+96,32);
+ uint32_t rawHi = bytebits_to_byte(BitStream+idx+64,32);
+ uint32_t rawHi2 = bytebits_to_byte(BitStream+idx+32,32);
+ uint32_t rawHi3 = bytebits_to_byte(BitStream+idx,32);
+ setDemodBuf(BitStream,128,idx);
+
+ size = removeParity(BitStream, idx+8, 8, 1, 120);
+ if (size != 105){
+ if (g_debugMode==1) PrintAndLog("DEBUG: Error at parity check-tag size does not match Pyramid format, SIZE: %d, IDX: %d, hi3: %x",size, idx, rawHi3);
+ return 0;
+ }
+
+ // ok valid card found!
+
+ // Index map
+ // 0 10 20 30 40 50 60 70
+ // | | | | | | | |
+ // 01234567890123456789012345678901234567890123456789012345678901234567890
+ // -----------------------------------------------------------------------
+ // 00000000000000000000000000000000000000000000000000000000000000000000000
+ // xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+ // 71 80 90 100
+ // | | | |
+ // 1 2 34567890 1234567890123456 7 8901234
+ // ---------------------------------------
+ // 1 1 01110011 0000000001000110 0 1001010
+ // s w ffffffff cccccccccccccccc w ppppppp
+ // |--115-| |------71------|
+ // s = format start bit, o = odd parity of last 7 bits
+ // f = facility code, c = card number
+ // w = wiegand parity, x = extra space for other formats
+ // p = unknown checksum
+ // (26 bit format shown)
+
+ //find start bit to get fmtLen
+ int j;
+ for (j=0; j<size; j++){
+ if(BitStream[j]) break;
+ }
+ uint8_t fmtLen = size-j-8;
+ uint32_t fc = 0;
+ uint32_t cardnum = 0;
+ uint32_t code1 = 0;
+ //uint32_t code2 = 0;
+ if (fmtLen==26){
+ fc = bytebits_to_byte(BitStream+73, 8);
+ cardnum = bytebits_to_byte(BitStream+81, 16);
+ code1 = bytebits_to_byte(BitStream+72,fmtLen);
+ PrintAndLog("Pyramid ID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %08x%08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi3, rawHi2, rawHi, rawLo);
+ } else if (fmtLen==45){
+ fmtLen=42; //end = 10 bits not 7 like 26 bit fmt
+ fc = bytebits_to_byte(BitStream+53, 10);
+ cardnum = bytebits_to_byte(BitStream+63, 32);
+ PrintAndLog("Pyramid ID Found - BitLength: %d, FC: %d, Card: %d - Raw: %08x%08x%08x%08x", fmtLen, fc, cardnum, rawHi3, rawHi2, rawHi, rawLo);
+ } else {
+ cardnum = bytebits_to_byte(BitStream+81, 16);
+ if (fmtLen>32){
+ //code1 = bytebits_to_byte(BitStream+(size-fmtLen),fmtLen-32);
+ //code2 = bytebits_to_byte(BitStream+(size-32),32);
+ PrintAndLog("Pyramid ID Found - BitLength: %d -unknown BitLength- (%d), Raw: %08x%08x%08x%08x", fmtLen, cardnum, rawHi3, rawHi2, rawHi, rawLo);
+ } else{
+ //code1 = bytebits_to_byte(BitStream+(size-fmtLen),fmtLen);
+ PrintAndLog("Pyramid ID Found - BitLength: %d -unknown BitLength- (%d), Raw: %08x%08x%08x%08x", fmtLen, cardnum, rawHi3, rawHi2, rawHi, rawLo);
+ }
+ }
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, 128);
+ printDemodBuff();
+ }
+ return 1;
+}
+
int CmdFSKdemod(const char *Cmd) //old CmdFSKdemod needs updating
{
static const int LowTone[] = {
PrintAndLog("actual data bits start at sample %d", maxPos);
PrintAndLog("length %d/%d", highLen, lowLen);
- uint8_t bits[46];
- bits[sizeof(bits)-1] = '\0';
+ uint8_t bits[46] = {0x00};
// find bit pairs and manchester decode them
for (i = 0; i < arraylen(bits) - 1; ++i) {
return 0;
}
-int CmdDetectNRZpskClockRate(const char *Cmd)
+//by marshmellow
+//attempt to psk1 demod graph buffer
+int PSKDemod(const char *Cmd, bool verbose)
{
- GetNRZpskClock("",0,0);
- return 0;
+ int invert=0;
+ int clk=0;
+ int maxErr=100;
+ sscanf(Cmd, "%i %i %i", &clk, &invert, &maxErr);
+ if (clk==1){
+ invert=1;
+ clk=0;
+ }
+ if (invert != 0 && invert != 1) {
+ if (verbose) PrintAndLog("Invalid argument: %s", Cmd);
+ return -1;
+ }
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return -1;
+ uint8_t carrier=countPSK_FC(BitStream, BitLen);
+ if (carrier!=2 && carrier!=4 && carrier!=8){
+ //invalid carrier
+ return -1;
+ }
+ int errCnt=0;
+ errCnt = pskRawDemod(BitStream, &BitLen, &clk, &invert);
+ if (errCnt > maxErr){
+ if (g_debugMode==1 && verbose) PrintAndLog("Too many errors found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
+ return -1;
+ }
+ if (errCnt<0|| BitLen<16){ //throw away static - allow 1 and -1 (in case of threshold command first)
+ if (g_debugMode==1 && verbose) PrintAndLog("no data found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
+ return -1;
+ }
+ if (verbose) PrintAndLog("Tried PSK Demod using Clock: %d - invert: %d - Bits Found: %d",clk,invert,BitLen);
+ //prime demod buffer for output
+ setDemodBuf(BitStream,BitLen,0);
+ return errCnt;
}
-int PSKnrzDemod(const char *Cmd){
- int invert=0;
- int clk=0;
- sscanf(Cmd, "%i %i", &clk, &invert);
- if (invert != 0 && invert != 1) {
- PrintAndLog("Invalid argument: %s", Cmd);
- return -1;
- }
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t BitLen = getFromGraphBuf(BitStream);
- int errCnt=0;
- errCnt = pskNRZrawDemod(BitStream, &BitLen,&clk,&invert);
- if (errCnt<0|| BitLen<16){ //throw away static - allow 1 and -1 (in case of threshold command first)
- //PrintAndLog("no data found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
- return -1;
- }
- PrintAndLog("Tried PSK/NRZ Demod using Clock: %d - invert: %d - Bits Found: %d",clk,invert,BitLen);
-
- //prime demod buffer for output
- setDemodBuf(BitStream,BitLen);
- return errCnt;
-}
// Indala 26 bit decode
// by marshmellow
// optional arguments - same as CmdpskNRZrawDemod (clock & invert)
int CmdIndalaDecode(const char *Cmd)
{
- uint8_t verbose = 1;
- int ans;
- if (strlen(Cmd)>0){
- if (Cmd[0]=='0'){
- verbose=0;
- ans = PSKnrzDemod("32");
- }else{
- ans = PSKnrzDemod(Cmd);
- }
- } else{ //default to RF/32
- ans = PSKnrzDemod("32");
- }
+ int ans;
+ if (strlen(Cmd)>0){
+ ans = PSKDemod(Cmd, 0);
+ } else{ //default to RF/32
+ ans = PSKDemod("32", 0);
+ }
if (ans < 0){
- if (verbose)
- PrintAndLog("Error1: %d",ans);
+ if (g_debugMode==1)
+ PrintAndLog("Error1: %d",ans);
return 0;
}
uint8_t invert=0;
ans = indala26decode(DemodBuffer,(size_t *) &DemodBufferLen, &invert);
if (ans < 1) {
- if (verbose)
- PrintAndLog("Error2: %d",ans);
+ if (g_debugMode==1)
+ PrintAndLog("Error2: %d",ans);
return -1;
}
- char showbits[251];
+ char showbits[251]={0x00};
if (invert)
- if (verbose)
- PrintAndLog("Had to invert bits");
+ if (g_debugMode==1)
+ PrintAndLog("Had to invert bits");
+
//convert UID to HEX
uint32_t uid1, uid2, uid3, uid4, uid5, uid6, uid7;
int idx;
showbits[idx]='\0';
PrintAndLog("Indala UID=%s (%x%08x%08x%08x%08x%08x%08x)", showbits, uid1, uid2, uid3, uid4, uid5, uid6, uid7);
}
+ if (g_debugMode){
+ PrintAndLog("DEBUG: printing demodbuffer:");
+ printDemodBuff();
+ }
return 1;
}
-int CmdPskClean(const char *Cmd)
+// by marshmellow
+// takes 3 arguments - clock, invert, maxErr as integers
+// attempts to demodulate nrz only
+// prints binary found and saves in demodbuffer for further commands
+
+int NRZrawDemod(const char *Cmd, bool verbose)
{
- uint8_t bitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t bitLen = getFromGraphBuf(bitStream);
- pskCleanWave(bitStream, bitLen);
- setGraphBuf(bitStream, bitLen);
- return 0;
+ int invert=0;
+ int clk=0;
+ int maxErr=100;
+ sscanf(Cmd, "%i %i %i", &clk, &invert, &maxErr);
+ if (clk==1){
+ invert=1;
+ clk=0;
+ }
+ if (invert != 0 && invert != 1) {
+ PrintAndLog("Invalid argument: %s", Cmd);
+ return 0;
+ }
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return 0;
+ int errCnt=0;
+ errCnt = nrzRawDemod(BitStream, &BitLen, &clk, &invert, maxErr);
+ if (errCnt > maxErr){
+ if (g_debugMode==1 && verbose) PrintAndLog("Too many errors found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
+ return 0;
+ }
+ if (errCnt<0|| BitLen<16){ //throw away static - allow 1 and -1 (in case of threshold command first)
+ if (g_debugMode==1 && verbose) PrintAndLog("no data found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
+ return 0;
+ }
+ PrintAndLog("Tried NRZ Demod using Clock: %d - invert: %d - Bits Found: %d",clk,invert,BitLen);
+ //prime demod buffer for output
+ setDemodBuf(BitStream,BitLen,0);
+
+ if (errCnt>0 && verbose){
+ PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
+ }
+ if (verbose) {
+ PrintAndLog("NRZ demoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ printDemodBuff();
+ }
+ return 1;
}
-//by marshmellow
-//takes 2 arguments - clock and invert both as integers
-//attempts to demodulate ask only
-//prints binary found and saves in graphbuffer for further commands
-int CmdpskNRZrawDemod(const char *Cmd)
+int CmdNRZrawDemod(const char *Cmd)
+{
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data rawdemod nr [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod nr = demod a nrz/direct tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod nr 32 = demod a nrz/direct tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod nr 32 1 = demod a nrz/direct tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod nr 1 = demod a nrz/direct tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod nr 64 1 0 = demod a nrz/direct tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ return 0;
+ }
+ return NRZrawDemod(Cmd, TRUE);
+}
+
+// by marshmellow
+// takes 3 arguments - clock, invert, maxErr as integers
+// attempts to demodulate psk only
+// prints binary found and saves in demodbuffer for further commands
+int CmdPSK1rawDemod(const char *Cmd)
{
- uint8_t verbose = 1;
int errCnt;
- if (strlen(Cmd)>0){
- if (Cmd[0]=='0')
- verbose=0;
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data rawdemod p1 [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod p1 = demod a psk1 tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod p1 32 = demod a psk1 tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod p1 32 1 = demod a psk1 tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod p1 1 = demod a psk1 tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod p1 64 1 0 = demod a psk1 tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ return 0;
}
+ errCnt = PSKDemod(Cmd, TRUE);
+ //output
+ if (errCnt<0){
+ if (g_debugMode) PrintAndLog("Error demoding: %d",errCnt);
+ return 0;
+ }
+ if (errCnt>0){
+ PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
+ }
+ PrintAndLog("PSK demoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ printDemodBuff();
+ return 1;
+}
- errCnt = PSKnrzDemod(Cmd);
- //output
- if (errCnt<0) return 0;
- if (errCnt>0){
- if (verbose)
+// by marshmellow
+// takes same args as cmdpsk1rawdemod
+int CmdPSK2rawDemod(const char *Cmd)
+{
+ int errCnt=0;
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data rawdemod p2 [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod p2 = demod a psk2 tag from GraphBuffer, autodetect clock");
+ PrintAndLog(" : data rawdemod p2 32 = demod a psk2 tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod p2 32 1 = demod a psk2 tag from GraphBuffer using a clock of RF/32 and inverting output");
+ PrintAndLog(" : data rawdemod p2 1 = demod a psk2 tag from GraphBuffer, autodetect clock and invert output");
+ PrintAndLog(" : data rawdemod p2 64 1 0 = demod a psk2 tag from GraphBuffer using a clock of RF/64, inverting output and allowing 0 demod errors");
+ return 0;
+ }
+ errCnt=PSKDemod(Cmd, TRUE);
+ if (errCnt<0){
+ if (g_debugMode) PrintAndLog("Error demoding: %d",errCnt);
+ return 0;
+ }
+ psk1TOpsk2(DemodBuffer, DemodBufferLen);
+ if (errCnt>0){
+ if (g_debugMode){
PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
- }
- PrintAndLog("PSK or NRZ demoded bitstream:");
- // Now output the bitstream to the scrollback by line of 16 bits
- printDemodBuff();
+ PrintAndLog("PSK2 demoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ printDemodBuff();
+ }
+ }else{
+ PrintAndLog("PSK2 demoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ printDemodBuff();
+ }
+ return 1;
+}
- return 1;
+// by marshmellow - combines all raw demod functions into one menu command
+int CmdRawDemod(const char *Cmd)
+{
+ char cmdp = Cmd[0]; //param_getchar(Cmd, 0);
+
+ if (strlen(Cmd) > 14 || cmdp == 'h' || cmdp == 'H' || strlen(Cmd)<2) {
+ PrintAndLog("Usage: data rawdemod [modulation] <help>|<options>");
+ PrintAndLog(" [modulation] as 2 char, 'am' for ask/manchester, 'ar' for ask/raw, 'fs' for fsk, 'nr' for nrz/direct, 'p1' for psk1, 'p2' for psk2");
+ PrintAndLog(" <help> as 'h', prints the help for the specific modulation");
+ PrintAndLog(" <options> see specific modulation help for optional parameters");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod fs h = print help for ask/raw demod");
+ PrintAndLog(" : data rawdemod fs = demod GraphBuffer using: fsk - autodetect");
+ PrintAndLog(" : data rawdemod am = demod GraphBuffer using: ask/manchester - autodetect");
+ PrintAndLog(" : data rawdemod ar = demod GraphBuffer using: ask/raw - autodetect");
+ PrintAndLog(" : data rawdemod nr = demod GraphBuffer using: nrz/direct - autodetect");
+ PrintAndLog(" : data rawdemod p1 = demod GraphBuffer using: psk1 - autodetect");
+ PrintAndLog(" : data rawdemod p2 = demod GraphBuffer using: psk2 - autodetect");
+ return 0;
+ }
+ char cmdp2 = Cmd[1];
+ int ans = 0;
+ if (cmdp == 'f' && cmdp2 == 's'){
+ ans = CmdFSKrawdemod(Cmd+3);
+ } else if(cmdp == 'a' && cmdp2 == 'm'){
+ ans = Cmdaskmandemod(Cmd+3);
+ } else if(cmdp == 'a' && cmdp2 == 'r'){
+ ans = Cmdaskrawdemod(Cmd+3);
+ } else if(cmdp == 'n' && cmdp2 == 'r'){
+ ans = CmdNRZrawDemod(Cmd+3);
+ } else if(cmdp == 'p' && cmdp2 == '1'){
+ ans = CmdPSK1rawDemod(Cmd+3);
+ } else if(cmdp == 'p' && cmdp2 == '2'){
+ ans = CmdPSK2rawDemod(Cmd+3);
+ } else {
+ PrintAndLog("unknown modulation entered - see help ('h') for parameter structure");
+ }
+ return ans;
}
int CmdGrid(const char *Cmd)
int offset = 0;
char string_buf[25];
char* string_ptr = string_buf;
- uint8_t got[40000];
+ uint8_t got[BIGBUF_SIZE];
sscanf(Cmd, "%i %i", &requested, &offset);
requested = 8;
}
if (offset + requested > sizeof(got)) {
- PrintAndLog("Tried to read past end of buffer, <bytes> + <offset> > 40000");
+ PrintAndLog("Tried to read past end of buffer, <bytes> + <offset> > %d", BIGBUF_SIZE);
return 0;
}
*(string_ptr - 1) = '\0';
PrintAndLog("%s", string_buf);
string_buf[0] = '\0';
+ }
}
- }
return 0;
}
return 0;
}
+//zero mean GraphBuffer
int CmdHpf(const char *Cmd)
{
int i;
// we don't have to worry about remaining trash
// in the last byte in case the bits-per-sample
// does not line up on byte boundaries
- uint8_t got[40000-1];
+ uint8_t got[BIGBUF_SIZE-1] = { 0 };
int n = strtol(Cmd, NULL, 0);
if (n == 0)
PrintAndLog("# LF antenna: %5.2f V @ 134.00 kHz", vLf134/1000.0);
PrintAndLog("# LF optimal: %5.2f V @%9.2f kHz", peakv/1000.0, 12000.0/(peakf+1));
PrintAndLog("# HF antenna: %5.2f V @ 13.56 MHz", vHf/1000.0);
- if (peakv<2000)
+
+#define LF_UNUSABLE_V 2948 // was 2000. Changed due to bugfix in voltage measurements. LF results are now 47% higher.
+#define LF_MARGINAL_V 14739 // was 10000. Changed due to bugfix bug in voltage measurements. LF results are now 47% higher.
+#define HF_UNUSABLE_V 3167 // was 2000. Changed due to bugfix in voltage measurements. HF results are now 58% higher.
+#define HF_MARGINAL_V 7917 // was 5000. Changed due to bugfix in voltage measurements. HF results are now 58% higher.
+
+ if (peakv < LF_UNUSABLE_V)
PrintAndLog("# Your LF antenna is unusable.");
- else if (peakv<10000)
+ else if (peakv < LF_MARGINAL_V)
PrintAndLog("# Your LF antenna is marginal.");
- if (vHf<2000)
+ if (vHf < HF_UNUSABLE_V)
PrintAndLog("# Your HF antenna is unusable.");
- else if (vHf<5000)
+ else if (vHf < HF_MARGINAL_V)
PrintAndLog("# Your HF antenna is marginal.");
- for (int i = 0; i < 256; i++) {
- GraphBuffer[i] = resp.d.asBytes[i] - 128;
+ if (peakv >= LF_UNUSABLE_V) {
+ for (int i = 0; i < 256; i++) {
+ GraphBuffer[i] = resp.d.asBytes[i] - 128;
+ }
+ PrintAndLog("Displaying LF tuning graph. Divisor 89 is 134khz, 95 is 125khz.\n");
+ PrintAndLog("\n");
+ GraphTraceLen = 256;
+ ShowGraphWindow();
+ RepaintGraphWindow();
}
- PrintAndLog("Done! Divisor 89 is 134khz, 95 is 125khz.\n");
- PrintAndLog("\n");
- GraphTraceLen = 256;
- ShowGraphWindow();
-
- return 0;
+ return 0;
}
int CmdLoad(const char *Cmd)
{
- char filename[FILE_PATH_SIZE] = {0x00};
- int len = 0;
+ char filename[FILE_PATH_SIZE] = {0x00};
+ int len = 0;
- len = strlen(Cmd);
- if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;
- memcpy(filename, Cmd, len);
+ len = strlen(Cmd);
+ if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;
+ memcpy(filename, Cmd, len);
- FILE *f = fopen(filename, "r");
+ FILE *f = fopen(filename, "r");
if (!f) {
PrintAndLog("couldn't open '%s'", filename);
return 0;
RepaintGraphWindow();
return 0;
}
+
+// trim graph to input argument length
int CmdRtrim(const char *Cmd)
{
int ds = atoi(Cmd);
}
/* Get our clock */
- clock = GetClock(Cmd, high, 1);
+ clock = GetAskClock(Cmd, high, 1);
int tolerance = clock/4;
int bit, lastbit, wave;
/* Get our clock */
- clock = GetClock(Cmd, 0, 1);
+ clock = GetAskClock(Cmd, 0, 1);
wave = 0;
lastbit = 1;
int CmdSave(const char *Cmd)
{
- char filename[FILE_PATH_SIZE] = {0x00};
- int len = 0;
+ char filename[FILE_PATH_SIZE] = {0x00};
+ int len = 0;
- len = strlen(Cmd);
- if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;
- memcpy(filename, Cmd, len);
+ len = strlen(Cmd);
+ if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;
+ memcpy(filename, Cmd, len);
FILE *f = fopen(filename, "w");
int CmdDirectionalThreshold(const char *Cmd)
{
- int8_t upThres = param_get8(Cmd, 0);
- int8_t downThres = param_get8(Cmd, 1);
+ int8_t upThres = param_get8(Cmd, 0);
+ int8_t downThres = param_get8(Cmd, 1);
printf("Applying Up Threshold: %d, Down Threshold: %d\n", upThres, downThres);
{
{"help", CmdHelp, 1, "This help"},
{"amp", CmdAmp, 1, "Amplify peaks"},
- {"askdemod", Cmdaskdemod, 1, "<0 or 1> -- Attempt to demodulate simple ASK tags"},
- {"askmandemod", Cmdaskmandemod, 1, "[clock] [invert<0|1>] -- Attempt to demodulate ASK/Manchester tags and output binary (args optional[clock will try Auto-detect])"},
- {"askrawdemod", Cmdaskrawdemod, 1, "[clock] [invert<0|1>] -- Attempt to demodulate ASK tags and output binary (args optional[clock will try Auto-detect])"},
+ //{"askdemod", Cmdaskdemod, 1, "<0 or 1> -- Attempt to demodulate simple ASK tags"},
+ {"askedgedetect", CmdAskEdgeDetect, 1, "[threshold] Adjust Graph for manual ask demod using length of sample differences to detect the edge of a wave (default = 25)"},
+ {"askem410xdemod",CmdAskEM410xDemod, 1, "[clock] [invert<0|1>] [maxErr] -- Demodulate an EM410x tag from GraphBuffer (args optional)"},
+ {"askgproxiidemod",CmdG_Prox_II_Demod,1, "Demodulate a G Prox II tag from GraphBuffer"},
+ //{"askmandemod", Cmdaskmandemod, 1, "[clock] [invert<0|1>] [maxErr] -- Attempt to demodulate ASK/Manchester tags and output binary (args optional)"},
+ //{"askrawdemod", Cmdaskrawdemod, 1, "[clock] [invert<0|1>] -- Attempt to demodulate ASK tags and output bin (args optional)"},
{"autocorr", CmdAutoCorr, 1, "<window length> -- Autocorrelation over window"},
- {"biphaserawdecode",CmdBiphaseDecodeRaw,1,"[offset] Biphase decode binary stream already in graph buffer (offset = bit to start decode from)"},
+ {"biphaserawdecode",CmdBiphaseDecodeRaw,1,"[offset] [invert<0|1>] Biphase decode bin stream in DemodBuffer (offset = 0|1 bits to shift the decode start)"},
{"bitsamples", CmdBitsamples, 0, "Get raw samples as bitstring"},
- {"bitstream", CmdBitstream, 1, "[clock rate] -- Convert waveform into a bitstream"},
+ //{"bitstream", CmdBitstream, 1, "[clock rate] -- Convert waveform into a bitstream"},
{"buffclear", CmdBuffClear, 1, "Clear sample buffer and graph window"},
{"dec", CmdDec, 1, "Decimate samples"},
- {"detectclock", CmdDetectClockRate, 1, "Detect ASK clock rate"},
- {"fskdemod", CmdFSKdemod, 1, "Demodulate graph window as a HID FSK"},
- {"fskhiddemod", CmdFSKdemodHID, 1, "Demodulate graph window as a HID FSK using raw"},
- {"fskiodemod", CmdFSKdemodIO, 1, "Demodulate graph window as an IO Prox FSK using raw"},
- {"fskrawdemod", CmdFSKrawdemod, 1, "[clock rate] [invert] [rchigh] [rclow] Demodulate graph window from FSK to binary (clock = 50)(invert = 1|0)(rchigh = 10)(rclow=8)"},
+ {"detectclock", CmdDetectClockRate, 1, "[modulation] Detect clock rate of wave in GraphBuffer (options: 'a','f','n','p' for ask, fsk, nrz, psk respectively)"},
+ //{"fskdemod", CmdFSKdemod, 1, "Demodulate graph window as a HID FSK"},
+ {"fskawiddemod", CmdFSKdemodAWID, 1, "Demodulate an AWID FSK tag from GraphBuffer"},
+ //{"fskfcdetect", CmdFSKfcDetect, 1, "Try to detect the Field Clock of an FSK wave"},
+ {"fskhiddemod", CmdFSKdemodHID, 1, "Demodulate a HID FSK tag from GraphBuffer"},
+ {"fskiodemod", CmdFSKdemodIO, 1, "Demodulate an IO Prox FSK tag from GraphBuffer"},
+ {"fskpyramiddemod",CmdFSKdemodPyramid,1, "Demodulate a Pyramid FSK tag from GraphBuffer"},
+ {"fskparadoxdemod",CmdFSKdemodParadox,1, "Demodulate a Paradox FSK tag from GraphBuffer"},
+ //{"fskrawdemod", CmdFSKrawdemod, 1, "[clock rate] [invert] [rchigh] [rclow] Demodulate graph window from FSK to bin (clock = 50)(invert = 1|0)(rchigh = 10)(rclow=8)"},
+ {"getbitstream", CmdGetBitStream, 1, "Convert GraphBuffer's >=1 values to 1 and <1 to 0"},
{"grid", CmdGrid, 1, "<x> <y> -- overlay grid on graph window, use zero value to turn off either"},
- {"hexsamples", CmdHexsamples, 0, "<bytes> [<offset>] -- Dump big buffer as hex bytes"},
+ {"hexsamples", CmdHexsamples, 0, "<bytes> [<offset>] -- Dump big buffer as hex bytes"},
{"hide", CmdHide, 1, "Hide graph window"},
{"hpf", CmdHpf, 1, "Remove DC offset from trace"},
{"load", CmdLoad, 1, "<filename> -- Load trace (to graph window"},
{"ltrim", CmdLtrim, 1, "<samples> -- Trim samples from left of trace"},
{"rtrim", CmdRtrim, 1, "<location to end trace> -- Trim samples from right of trace"},
- {"mandemod", CmdManchesterDemod, 1, "[i] [clock rate] -- Manchester demodulate binary stream (option 'i' to invert output)"},
- {"manrawdecode", Cmdmandecoderaw, 1, "Manchester decode binary stream already in graph buffer"},
+ //{"mandemod", CmdManchesterDemod, 1, "[i] [clock rate] -- Manchester demodulate binary stream (option 'i' to invert output)"},
+ {"manrawdecode", Cmdmandecoderaw, 1, "Manchester decode binary stream in DemodBuffer"},
{"manmod", CmdManchesterMod, 1, "[clock rate] -- Manchester modulate a binary stream"},
- {"norm", CmdNorm, 1, "Normalize max/min to +/-128"},
+ {"norm", CmdNorm, 1, "Normalize max/min to +/-128"},
+ //{"nrzdetectclock",CmdDetectNRZClockRate, 1, "Detect ASK, PSK, or NRZ clock rate"},
+ //{"nrzrawdemod", CmdNRZrawDemod, 1, "[clock] [invert<0|1>] [maxErr] -- Attempt to demodulate nrz tags and output binary (args optional)"},
{"plot", CmdPlot, 1, "Show graph window (hit 'h' in window for keystroke help)"},
- {"pskclean", CmdPskClean, 1, "Attempt to clean psk wave"},
- {"pskdetectclock",CmdDetectNRZpskClockRate, 1, "Detect ASK, PSK, or NRZ clock rate"},
- {"pskindalademod",CmdIndalaDecode, 1, "[clock] [invert<0|1>] -- Attempt to demodulate psk indala tags and output ID binary & hex (args optional[clock will try Auto-detect])"},
- {"psknrzrawdemod",CmdpskNRZrawDemod, 1, "[clock] [invert<0|1>] -- Attempt to demodulate psk or nrz tags and output binary (args optional[clock will try Auto-detect])"},
- {"samples", CmdSamples, 0, "[512 - 40000] -- Get raw samples for graph window"},
+ //{"pskdetectclock",CmdDetectPSKClockRate, 1, "Detect ASK, PSK, or NRZ clock rate"},
+ {"printdemodbuffer",CmdPrintDemodBuff,1, "[x] -- print the data in the DemodBuffer - 'x' for hex output"},
+ {"pskindalademod",CmdIndalaDecode, 1, "[clock] [invert<0|1>] -- Demodulate an indala tag (PSK1) from GraphBuffer (args optional)"},
+ //{"psk1rawdemod", CmdPSK1rawDemod, 1, "[clock] [invert<0|1>] [maxErr] -- Attempt to demodulate psk1 tags and output binary (args optional)"},
+ //{"psk2rawdemod", CmdPSK2rawDemod, 1, "[clock] [invert<0|1>] [maxErr] -- Attempt to demodulate psk2 tags and output binary (args optional)"},
+ {"rawdemod", CmdRawDemod, 1, "[modulation] ... <options> -see help (h option) -- Demodulate the data in the GraphBuffer and output binary"},
+ {"samples", CmdSamples, 0, "[512 - 40000] -- Get raw samples for graph window (GraphBuffer)"},
{"save", CmdSave, 1, "<filename> -- Save trace (from graph window)"},
{"scale", CmdScale, 1, "<int> -- Set cursor display scale"},
- {"threshold", CmdThreshold, 1, "<threshold> -- Maximize/minimize every value in the graph window depending on threshold"},
- {"dirthreshold", CmdDirectionalThreshold, 1, "<thres up> <thres down> -- Max rising higher up-thres/ Min falling lower down-thres, keep rest as prev."},
- {"tune", CmdTuneSamples, 0, "Get hw tune samples for graph window"},
- {"undec", CmdUndec, 1, "Un-decimate samples by 2"},
- {"zerocrossings", CmdZerocrossings, 1, "Count time between zero-crossings"},
+ {"setdebugmode", CmdSetDebugMode, 1, "<0|1> -- Turn on or off Debugging Mode for demods"},
+ {"shiftgraphzero",CmdGraphShiftZero, 1, "<shift> -- Shift 0 for Graphed wave + or - shift value"},
+ //{"threshold", CmdThreshold, 1, "<threshold> -- Maximize/minimize every value in the graph window depending on threshold"},
+ {"dirthreshold", CmdDirectionalThreshold, 1, "<thres up> <thres down> -- Max rising higher up-thres/ Min falling lower down-thres, keep rest as prev."},
+ {"tune", CmdTuneSamples, 0, "Get hw tune samples for graph window"},
+ {"undec", CmdUndec, 1, "Un-decimate samples by 2"},
+ {"zerocrossings", CmdZerocrossings, 1, "Count time between zero-crossings"},
{NULL, NULL, 0, NULL}
};
projects / proxmark3-svn / blobdiff