bugfixes hf epa cnonces

[proxmark3-svn] / armsrc / appmain.c

diff --git a/armsrc/appmain.c b/armsrc/appmain.c
index 2061f6b3efb758fb4817cf54f0f2cd4c082a88b9..143b175e5433a9d1e7841c6b42d6548091944f01 100644 (file)
--- a/armsrc/appmain.c
+++ b/armsrc/appmain.c
@@ -36,7 +36,8 @@
 // is the order in which they go out on the wire.
 //=============================================================================
 
-uint8_t ToSend[512];
+#define TOSEND_BUFFER_SIZE (9*MAX_FRAME_SIZE + 1 + 1 + 2)  // 8 data bits and 1 parity bit per payload byte, 1 correction bit, 1 SOC bit, 2 EOC bits 
+uint8_t ToSend[TOSEND_BUFFER_SIZE];
 int ToSendMax;
 static int ToSendBit;
 struct common_area common_area __attribute__((section(".commonarea")));
@@ -67,7 +68,7 @@ void ToSendStuffBit(int b)
 
        ToSendBit++;
 
-       if(ToSendBit >= sizeof(ToSend)) {
+       if(ToSendMax >= sizeof(ToSend)) {
                ToSendBit = 0;
                DbpString("ToSendStuffBit overflowed!");
        }
@@ -195,15 +196,11 @@ int AvgAdc(int ch) // was static - merlok
 
 void MeasureAntennaTuning(void)
 {
-       uint8_t *dest = (uint8_t *)BigBuf+FREE_BUFFER_OFFSET;
+       uint8_t LF_Results[256];
        int i, adcval = 0, peak = 0, peakv = 0, peakf = 0; //ptr = 0 
        int vLf125 = 0, vLf134 = 0, vHf = 0;    // in mV
 
-//     UsbCommand c;
-
-  LED_B_ON();
-       DbpString("Measuring antenna characteristics, please wait...");
-       memset(dest,0,sizeof(FREE_BUFFER_SIZE));
+       LED_B_ON();
 
 /*
  * Sweeps the useful LF range of the proxmark from
@@ -216,7 +213,7 @@ void MeasureAntennaTuning(void)
   
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-       for (i=255; i>19; i--) {
+       for (i=255; i>=19; i--) {
     WDT_HIT();
                FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);
                SpinDelay(20);
@@ -226,16 +223,18 @@ void MeasureAntennaTuning(void)
                if (i==95)      vLf125 = adcval; // voltage at 125Khz
                if (i==89)      vLf134 = adcval; // voltage at 134Khz
 
-               dest[i] = adcval>>8; // scale int to fit in byte for graphing purposes
-               if(dest[i] > peak) {
+               LF_Results[i] = adcval>>8; // scale int to fit in byte for graphing purposes
+               if(LF_Results[i] > peak) {
                        peakv = adcval;
-                       peak = dest[i];
+                       peak = LF_Results[i];
                        peakf = i;
                        //ptr = i;
                }
        }
 
-  LED_A_ON();
+       for (i=18; i >= 0; i--) LF_Results[i] = 0;
+       
+       LED_A_ON();
        // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
@@ -244,18 +243,11 @@ void MeasureAntennaTuning(void)
        // can measure voltages up to 33000 mV
        vHf = (33000 * AvgAdc(ADC_CHAN_HF)) >> 10;
 
-//     c.cmd = CMD_MEASURED_ANTENNA_TUNING;
-//     c.arg[0] = (vLf125 << 0) | (vLf134 << 16);
-//     c.arg[1] = vHf;
-//     c.arg[2] = peakf | (peakv << 16);
-
-  DbpString("Measuring complete, sending report back to host");
-  cmd_send(CMD_MEASURED_ANTENNA_TUNING,vLf125|(vLf134<<16),vHf,peakf|(peakv<<16),0,0);
-//     UsbSendPacket((uint8_t *)&c, sizeof(c));
+       cmd_send(CMD_MEASURED_ANTENNA_TUNING,vLf125|(vLf134<<16),vHf,peakf|(peakv<<16),LF_Results,256);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-  LED_A_OFF();
-  LED_B_OFF();
-  return;
+       LED_A_OFF();
+       LED_B_OFF();
+       return;
 }
 
 void MeasureAntennaTuningHf(void)
@@ -867,6 +859,9 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_READER_ICLASS:
                        ReaderIClass(c->arg[0]);
                        break;
+               case CMD_READER_ICLASS_REPLAY:
+                   ReaderIClass_Replay(c->arg[0], c->d.asBytes);
+                       break;
 #endif
 
                case CMD_SIMULATE_TAG_HF_LISTEN: