+int usage_data_printdemodbuf(void){
+ PrintAndLog("Usage: data printdemodbuffer x o <offset> l <length>");
+ PrintAndLog("Options:");
+ PrintAndLog(" h This help");
+ PrintAndLog(" x output in hex (omit for binary output)");
+ PrintAndLog(" o <offset> enter offset in # of bits");
+ PrintAndLog(" l <length> enter length to print in # of bits or hex characters respectively");
+ return 0;
+}
+int usage_data_askem410xdemod(void){
+ PrintAndLog("Usage: data askem410xdemod [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data askem410xdemod = demod an EM410x Tag ID from GraphBuffer");
+ PrintAndLog(" : data askem410xdemod 32 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data askem410xdemod 32 1 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data askem410xdemod 1 = demod an EM410x Tag ID from GraphBuffer while inverting data");
+ PrintAndLog(" : data askem410xdemod 64 1 0 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/64 and inverting data and allowing 0 demod errors");
+ return 0;
+}
+int usage_data_manrawdecode(void){
+ PrintAndLog("Usage: data manrawdecode [invert] [maxErr]");
+ PrintAndLog(" Takes 10 and 01 and converts to 0 and 1 respectively");
+ PrintAndLog(" --must have binary sequence in demodbuffer (run data askrawdemod first)");
+ PrintAndLog(" [invert] invert output");
+ PrintAndLog(" [maxErr] set number of errors allowed (default = 20)");
+ PrintAndLog("");
+ PrintAndLog(" sample: data manrawdecode = decode manchester bitstream from the demodbuffer");
+ return 0;
+}
+int usage_data_biphaserawdecode(void){
+ PrintAndLog("Usage: data biphaserawdecode [offset] [invert] [maxErr]");
+ PrintAndLog(" Converts 10 or 01 to 1 and 11 or 00 to 0");
+ PrintAndLog(" --must have binary sequence in demodbuffer (run data askrawdemod first)");
+ PrintAndLog(" --invert for Conditional Dephase Encoding (CDP) AKA Differential Manchester");
+ PrintAndLog("");
+ PrintAndLog(" [offset <0|1>], set to 0 not to adjust start position or to 1 to adjust decode start position");
+ PrintAndLog(" [invert <0|1>], set to 1 to invert output");
+ PrintAndLog(" [maxErr int], set max errors tolerated - default=20");
+ PrintAndLog("");
+ PrintAndLog(" sample: data biphaserawdecode = decode biphase bitstream from the demodbuffer");
+ PrintAndLog(" sample: data biphaserawdecode 1 1 = decode biphase bitstream from the demodbuffer, set offset, and invert output");
+ return 0;
+}
+int usage_data_rawdemod(void){
+ PrintAndLog("Usage: data rawdemod [modulation] <help>|<options>");
+ PrintAndLog(" [modulation] as 2 char, 'ab' for ask/biphase, 'am' for ask/manchester, 'ar' for ask/raw, 'fs' for fsk, ...");
+ PrintAndLog(" 'nr' for nrz/direct, 'p1' for psk1, 'p2' for psk2");
+ PrintAndLog(" <help> as 'h', prints the help for the specific modulation");
+ PrintAndLog(" <options> see specific modulation help for optional parameters");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod fs h = print help specific to fsk demod");
+ PrintAndLog(" : data rawdemod fs = demod GraphBuffer using: fsk - autodetect");
+ PrintAndLog(" : data rawdemod ab = demod GraphBuffer using: ask/biphase - autodetect");
+ PrintAndLog(" : data rawdemod am = demod GraphBuffer using: ask/manchester - autodetect");
+ PrintAndLog(" : data rawdemod ar = demod GraphBuffer using: ask/raw - autodetect");
+ PrintAndLog(" : data rawdemod nr = demod GraphBuffer using: nrz/direct - autodetect");
+ PrintAndLog(" : data rawdemod p1 = demod GraphBuffer using: psk1 - autodetect");
+ PrintAndLog(" : data rawdemod p2 = demod GraphBuffer using: psk2 - autodetect");
+ return 0;
+}
+int usage_data_rawdemod_am(void){
+ PrintAndLog("Usage: data rawdemod am <s> [clock] <invert> [maxError] [maxLen] [amplify]");
+ PrintAndLog(" ['s'] optional, check for Sequence Terminator");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect");
+ PrintAndLog(" <invert>, 1 to invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100");
+ PrintAndLog(" [set maximum Samples to read], default = 32768 (512 bits at rf/64)");
+ PrintAndLog(" <amplify>, 'a' to attempt demod with ask amplification, default = no amp");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod am = demod an ask/manchester tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod am 32 = demod an ask/manchester tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod am 32 1 = demod an ask/manchester tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod am 1 = demod an ask/manchester tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod am 64 1 0 = demod an ask/manchester tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ return 0;
+}
+int usage_data_rawdemod_ab(void){
+ PrintAndLog("Usage: data rawdemod ab [offset] [clock] <invert> [maxError] [maxLen] <amplify>");
+ PrintAndLog(" [offset], offset to begin biphase, default=0");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect");
+ PrintAndLog(" <invert>, 1 to invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100");
+ PrintAndLog(" [set maximum Samples to read], default = 32768 (512 bits at rf/64)");
+ PrintAndLog(" <amplify>, 'a' to attempt demod with ask amplification, default = no amp");
+ PrintAndLog(" NOTE: <invert> can be entered as second or third argument");
+ PrintAndLog(" NOTE: <amplify> can be entered as first, second or last argument");
+ PrintAndLog(" NOTE: any other arg must have previous args set to work");
+ PrintAndLog("");
+ PrintAndLog(" NOTE: --invert for Conditional Dephase Encoding (CDP) AKA Differential Manchester");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod ab = demod an ask/biph tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod ab 0 a = demod an ask/biph tag from GraphBuffer, amplified");
+ PrintAndLog(" : data rawdemod ab 1 32 = demod an ask/biph tag from GraphBuffer using an offset of 1 and a clock of RF/32");
+ PrintAndLog(" : data rawdemod ab 0 32 1 = demod an ask/biph tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod ab 0 1 = demod an ask/biph tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod ab 0 64 1 0 = demod an ask/biph tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ PrintAndLog(" : data rawdemod ab 0 64 1 0 0 a = demod an ask/biph tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors, and amp");
+ return 0;
+}
+int usage_data_rawdemod_ar(void){
+ PrintAndLog("Usage: data rawdemod ar [clock] <invert> [maxError] [maxLen] [amplify]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect");
+ PrintAndLog(" <invert>, 1 to invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100");
+ PrintAndLog(" [set maximum Samples to read], default = 32768 (1024 bits at rf/64)");
+ PrintAndLog(" <amplify>, 'a' to attempt demod with ask amplification, default = no amp");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod ar = demod an ask tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod ar a = demod an ask tag from GraphBuffer, amplified");
+ PrintAndLog(" : data rawdemod ar 32 = demod an ask tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod ar 32 1 = demod an ask tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod ar 1 = demod an ask tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod ar 64 1 0 = demod an ask tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ PrintAndLog(" : data rawdemod ar 64 1 0 0 a = demod an ask tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors, and amp");
+ return 0;
+}
+int usage_data_rawdemod_fs(void){
+ PrintAndLog("Usage: data rawdemod fs [clock] <invert> [fchigh] [fclow]");
+ PrintAndLog(" [set clock as integer] optional, omit for autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output, can be used even if the clock is omitted");
+ PrintAndLog(" [fchigh], larger field clock length, omit for autodetect");
+ PrintAndLog(" [fclow], small field clock length, omit for autodetect");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod fs = demod an fsk tag from GraphBuffer using autodetect");
+ PrintAndLog(" : data rawdemod fs 32 = demod an fsk tag from GraphBuffer using a clock of RF/32, autodetect fc");
+ PrintAndLog(" : data rawdemod fs 1 = demod an fsk tag from GraphBuffer using autodetect, invert output");
+ PrintAndLog(" : data rawdemod fs 32 1 = demod an fsk tag from GraphBuffer using a clock of RF/32, invert output, autodetect fc");
+ PrintAndLog(" : data rawdemod fs 64 0 8 5 = demod an fsk1 RF/64 tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod fs 50 0 10 8 = demod an fsk2 RF/50 tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod fs 50 1 10 8 = demod an fsk2a RF/50 tag from GraphBuffer");
+ return 0;
+}
+int usage_data_rawdemod_nr(void){
+ PrintAndLog("Usage: data rawdemod nr [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod nr = demod a nrz/direct tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod nr 32 = demod a nrz/direct tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod nr 32 1 = demod a nrz/direct tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod nr 1 = demod a nrz/direct tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod nr 64 1 0 = demod a nrz/direct tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ return 0;
+}
+int usage_data_rawdemod_p1(void){
+ PrintAndLog("Usage: data rawdemod p1 [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod p1 = demod a psk1 tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod p1 32 = demod a psk1 tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod p1 32 1 = demod a psk1 tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod p1 1 = demod a psk1 tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod p1 64 1 0 = demod a psk1 tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ return 0;
+}
+int usage_data_rawdemod_p2(void){
+ PrintAndLog("Usage: data rawdemod p2 [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod p2 = demod a psk2 tag from GraphBuffer, autodetect clock");
+ PrintAndLog(" : data rawdemod p2 32 = demod a psk2 tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod p2 32 1 = demod a psk2 tag from GraphBuffer using a clock of RF/32 and inverting output");
+ PrintAndLog(" : data rawdemod p2 1 = demod a psk2 tag from GraphBuffer, autodetect clock and invert output");
+ PrintAndLog(" : data rawdemod p2 64 1 0 = demod a psk2 tag from GraphBuffer using a clock of RF/64, inverting output and allowing 0 demod errors");
+ return 0;
+}
+int usage_data_autocorr(void) {
+ PrintAndLog("Usage: data autocorr [window] [g]");
+ PrintAndLog("Options:");
+ PrintAndLog(" h This help");
+ PrintAndLog(" [window] window length for correlation - default = 4000");
+ PrintAndLog(" g save back to GraphBuffer (overwrite)");
+ return 0;
+}
+int usage_data_undecimate(void){
+ PrintAndLog("Usage: data undec [factor]");
+ PrintAndLog("This function performs un-decimation, by repeating each sample N times");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" factor The number of times to repeat each sample.[default:2]");
+ PrintAndLog("Example: 'data undec 3'");
+ return 0;
+}
+int usage_data_detectclock(void){
+ PrintAndLog("Usage: data detectclock [modulation] <clock>");
+ PrintAndLog(" [modulation as char], specify the modulation type you want to detect the clock of");
+ PrintAndLog(" <clock> , specify the clock (optional - to get best start position only)");
+ PrintAndLog(" 'a' = ask, 'f' = fsk, 'n' = nrz/direct, 'p' = psk");
+ PrintAndLog("");
+ PrintAndLog(" sample: data detectclock a = detect the clock of an ask modulated wave in the GraphBuffer");
+ PrintAndLog(" data detectclock f = detect the clock of an fsk modulated wave in the GraphBuffer");
+ PrintAndLog(" data detectclock p = detect the clock of an psk modulated wave in the GraphBuffer");
+ PrintAndLog(" data detectclock n = detect the clock of an nrz/direct modulated wave in the GraphBuffer");
+ return 0;
+}
+int usage_data_hex2bin(void){
+ PrintAndLog("Usage: data hex2bin <hex_digits>");
+ PrintAndLog(" This function will ignore all non-hexadecimal characters (but stop reading on whitespace)");
+ return 0;
+}
+int usage_data_bin2hex(void){
+ PrintAndLog("Usage: data bin2hex <binary_digits>");
+ PrintAndLog(" This function will ignore all characters not 1 or 0 (but stop reading on whitespace)");
+ return 0;
+}
+
projects / proxmark3-svn / blobdiff