]> cvs.zerfleddert.de Git - proxmark3-svn/blobdiff - armsrc/iso14443a.c
CHG: generic code clean up. Removal of commented code.
[proxmark3-svn] / armsrc / iso14443a.c
index a4632aa543cff67e05fb3b1d4c74cc56c95ca76a..c2f809fee19ad706e54ee27043b6cd8c27adac56 100644 (file)
@@ -144,7 +144,6 @@ const uint8_t OddByteParity[256] = {
   1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1
 };
 
-
 void iso14a_set_trigger(bool enable) {
        trigger = enable;
 }
@@ -310,6 +309,7 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time)
        Uart.twoBits = (Uart.twoBits << 8) | bit;
        
        if (Uart.state == STATE_UNSYNCD) {                                                                                              // not yet synced
+       
                if (Uart.highCnt < 7) {                                                                                                 // wait for a stable unmodulated signal
                        if (Uart.twoBits == 0xffff) {
                                Uart.highCnt++;
@@ -399,7 +399,7 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time)
                                        if (Uart.len) {
                                                return TRUE;                                                                                    // we are finished with decoding the raw data sequence
                                        } else {
-                                               UartReset();                                                                                    // Nothing received - try again
+                                               UartReset();                                    // Nothing receiver - start over
                                        }
                                }
                                if (Uart.state == STATE_START_OF_COMMUNICATION) {                               // error - must not follow directly after SOC
@@ -473,7 +473,6 @@ void DemodReset()
        Demod.endTime = 0;
 }
 
-
 void DemodInit(uint8_t *data, uint8_t *parity)
 {
        Demod.output = data;
@@ -763,7 +762,6 @@ static void CodeIso14443aAsTagPar(const uint8_t *cmd, uint16_t len, uint8_t *par
        
        // Send startbit
        ToSend[++ToSendMax] = SEC_D;
-       
        LastProxToAirDuration = 8 * ToSendMax - 4;
 
        for(uint16_t i = 0; i < len; i++) {
@@ -990,6 +988,12 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data)
                        response1[1] = 0x00;
                        sak = 0x28;
                } break;
+               case 5: { // MIFARE TNP3XXX
+                       // Says: I am a toy
+                       response1[0] = 0x01;
+                       response1[1] = 0x0f;
+                       sak = 0x01;
+               } break;                
                default: {
                        Dbprintf("Error: unkown tagtype (%d)",tagType);
                        return;
@@ -1123,7 +1127,7 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data)
                        // We already responded, do not send anything with the EmSendCmd14443aRaw() that is called below
                        p_response = NULL;
                } else if(receivedCmd[0] == 0x50) {     // Received a HALT
-//                     DbpString("Reader requested we HALT!:");
+
                        if (tracing) {
                                LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
                        }
@@ -1228,6 +1232,7 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data)
                        // do the tracing for the previous reader request and this tag answer:
                        uint8_t par[MAX_PARITY_SIZE];
                        GetParity(p_response->response, p_response->response_n, par);
+       
                        EmLogTrace(Uart.output, 
                                                Uart.len, 
                                                Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, 
@@ -1308,13 +1313,6 @@ static void TransmitFor14443a(const uint8_t *cmd, uint16_t len, uint32_t *timing
        // clear TXRDY
        AT91C_BASE_SSC->SSC_THR = SEC_Y;
 
-       // for(uint16_t c = 0; c < 10;) {       // standard delay for each transfer (allow tag to be ready after last transmission)
-               // if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
-                       // AT91C_BASE_SSC->SSC_THR = SEC_Y;     
-                       // c++;
-               // }
-       // }
-
        uint16_t c = 0;
        for(;;) {
                if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
@@ -1327,7 +1325,6 @@ static void TransmitFor14443a(const uint8_t *cmd, uint16_t len, uint32_t *timing
        }
        
        NextTransferTime = MAX(NextTransferTime, LastTimeProxToAirStart + REQUEST_GUARD_TIME);
-       
 }
 
 
@@ -1669,7 +1666,6 @@ static int GetIso14443aAnswerFromTag(uint8_t *receivedResponse, uint8_t *receive
 
 void ReaderTransmitBitsPar(uint8_t* frame, uint16_t bits, uint8_t *par, uint32_t *timing)
 {
-
        CodeIso14443aBitsAsReaderPar(frame, bits, par);
   
        // Send command to tag
@@ -1744,7 +1740,6 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u
        
        // Receive the ATQA
        if(!ReaderReceive(resp, resp_par)) return 0;
-       //Dbprintf("atqa: %02x %02x",resp[1],resp[0]);
 
        if(p_hi14a_card) {
                memcpy(p_hi14a_card->atqa, resp, 2);
@@ -1800,7 +1795,6 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u
                        memcpy(uid_resp, resp, 4);
                }
                uid_resp_len = 4;
-               //Dbprintf("uid: %02x %02x %02x %02x",uid_resp[0],uid_resp[1],uid_resp[2],uid_resp[3]);
 
                // calculate crypto UID. Always use last 4 Bytes.
                if(cuid_ptr) {
@@ -1822,11 +1816,6 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u
                if ((sak & 0x04) /* && uid_resp[0] == 0x88 */) {
                        // Remove first byte, 0x88 is not an UID byte, it CT, see page 3 of:
                        // http://www.nxp.com/documents/application_note/AN10927.pdf
-                       // This was earlier:
-                       //memcpy(uid_resp, uid_resp + 1, 3);
-                       // But memcpy should not be used for overlapping arrays, 
-                       // and memmove appears to not be available in the arm build. 
-                       // Therefore:
                        uid_resp[0] = uid_resp[1];
                        uid_resp[1] = uid_resp[2];
                        uid_resp[2] = uid_resp[3]; 
@@ -1849,9 +1838,8 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u
                p_hi14a_card->ats_len = 0;
        }
 
-       if( (sak & 0x20) == 0) {
-               return 2; // non iso14443a compliant tag
-       }
+       // non iso14443a compliant tag
+       if( (sak & 0x20) == 0) return 2; 
 
        // Request for answer to select
        AppendCrc14443a(rats, 2);
@@ -1859,6 +1847,7 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u
 
        if (!(len = ReaderReceive(resp, resp_par))) return 0;
 
+       
        if(p_hi14a_card) {
                memcpy(p_hi14a_card->ats, resp, sizeof(p_hi14a_card->ats));
                p_hi14a_card->ats_len = len;
@@ -1866,7 +1855,6 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u
 
        // reset the PCB block number
        iso14_pcb_blocknum = 0;
-       
        return 1;       
 }
 
@@ -1957,7 +1945,7 @@ void ReaderIso14443a(UsbCommand *c)
        }
 
        if(param & ISO14A_SET_TIMEOUT) {
-               iso14a_timeout = c->arg[2];
+               iso14a_set_timeout(c->arg[2]);
        }
 
        if(param & ISO14A_APDU) {
@@ -2047,8 +2035,8 @@ void ReaderMifare(bool first_try)
        uint32_t nt = 0;
        uint32_t previous_nt = 0;
        static uint32_t nt_attacked = 0;
-       byte_t par_list[8] = {0,0,0,0,0,0,0,0};
-       byte_t ks_list[8] = {0,0,0,0,0,0,0,0};
+       byte_t par_list[8] = {0x00};
+       byte_t ks_list[8] = {0x00};
 
        static uint32_t sync_time;
        static uint32_t sync_cycles;
@@ -2057,8 +2045,6 @@ void ReaderMifare(bool first_try)
        uint16_t consecutive_resyncs = 0;
        int isOK = 0;
 
-
-
        if (first_try) { 
                mf_nr_ar3 = 0;
                iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
Impressum, Datenschutz