void DoAcquisition125k_internal(int trigger_threshold, bool silent)
{
uint8_t *dest = mifare_get_bigbufptr();
- int n = 8000;
+ int n = 24000;
int i;
memset(dest, 0x00, n);
void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command)
{
- int at134khz;
/* Make sure the tag is reset */
FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
SpinDelay(2500);
+ int divisor_used = 95; // 125 KHz
// see if 'h' was specified
- if (command[strlen((char *) command) - 1] == 'h')
- at134khz = TRUE;
- else
- at134khz = FALSE;
- if (at134khz)
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
- else
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+ if (command[strlen((char *) command) - 1] == 'h')
+ divisor_used = 88; // 134.8 KHz
+ FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-
// Give it a bit of time for the resonant antenna to settle.
SpinDelay(50);
+
+
// And a little more time for the tag to fully power up
SpinDelay(2000);
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
LED_D_OFF();
SpinDelayUs(delay_off);
- if (at134khz)
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
- else
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+ FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
LED_D_ON();
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
LED_D_OFF();
SpinDelayUs(delay_off);
- if (at134khz)
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
- else
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+ FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
// now do the read
- DoAcquisition125k();
+ DoAcquisition125k(-1);
}
/* blank r/w tag data stream
size_t size=0,idx=0; //, found=0;
uint32_t hi2=0, hi=0, lo=0;
+ // Configure to go in 125Khz listen mode
+ LFSetupFPGAForADC(0, true);
while(!BUTTON_PRESS()) {
- // Configure to go in 125Khz listen mode
- LFSetupFPGAForADC(0,true);
-
WDT_HIT();
if (ledcontrol) LED_A_ON();
- DoAcquisition125k();
+ DoAcquisition125k_internal(-1,true);
size = sizeof(BigBuf);
// FSK demodulator
size = fsk_demod(dest, size);
- WDT_HIT();
// we now have a set of cycle counts, loop over previous results and aggregate data into bit patterns
// 1->0 : fc/8 in sets of 6
idx+=sizeof(frame_marker_mask);
while(dest[idx] != dest[idx+1] && idx < size-2)
- { // Keep going until next frame marker (or error)
+ {
+ // Keep going until next frame marker (or error)
// Shift in a bit. Start by shifting high registers
hi2=(hi2<<1)|(hi>>31);
hi=(hi<<1)|(lo>>31);
}
//Dbprintf("Num shifts: %d ", numshifts);
// Hopefully, we read a tag and hit upon the next frame marker
+ if(idx + sizeof(frame_marker_mask) < size)
+ {
if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0)
{
if (hi2 != 0){
}
}
+ }
+
// reset
hi2 = hi = lo = 0;
numshifts = 0;
size_t size=0, idx=0;
uint32_t code=0, code2=0;
+ // Configure to go in 125Khz listen mode
+ LFSetupFPGAForADC(0, true);
while(!BUTTON_PRESS()) {
- // Configure to go in 125Khz listen mode
- LFSetupFPGAForADC(0,true);
WDT_HIT();
if (ledcontrol) LED_A_ON();
- DoAcquisition125k(true);
+ DoAcquisition125k_internal(-1,true);
size = sizeof(BigBuf);
// FSK demodulator
size = fsk_demod(dest, size);
- WDT_HIT();
// we now have a set of cycle counts, loop over previous results and aggregate data into bit patterns
// 1->0 : fc/8 in sets of 7