]> cvs.zerfleddert.de Git - proxmark3-svn/blobdiff - armsrc/mifaredesfire.c
chg: name error?
[proxmark3-svn] / armsrc / mifaredesfire.c
index 60f5ec0391723e92e140aed9dfdea57a3b8bf338..c5e42277d49650dc47d545ca504b8b0df8e76bc3 100644 (file)
@@ -1,10 +1,12 @@
 #include "mifaredesfire.h"
+#include "BigBuf.h"
 
 #define MAX_APPLICATION_COUNT 28
 #define MAX_FILE_COUNT 16
-#define MAX_FRAME_SIZE 60
+#define MAX_DESFIRE_FRAME_SIZE 60
 #define NOT_YET_AUTHENTICATED 255
-#define FRAME_PAYLOAD_SIZE (MAX_FRAME_SIZE - 5)
+#define FRAME_PAYLOAD_SIZE (MAX_DESFIRE_FRAME_SIZE - 5)
+#define RECEIVE_SIZE 64
 
 // the block number for the ISO14443-4 PCB
 uint8_t pcb_blocknum = 0;
@@ -17,24 +19,18 @@ static  uint8_t deselect_cmd[] = {0xc2,0xe0,0xb4};
 
 bool InitDesfireCard(){
 
-       // Make sure it is off.
-//     FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-//     SpinDelay(300);
-       
-       byte_t cardbuf[USB_CMD_DATA_SIZE];
-       memset(cardbuf,0,sizeof(cardbuf));
-       
-       iso14a_set_tracing(TRUE);
        iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
-       
+       set_tracing(TRUE);
+
+       byte_t cardbuf[USB_CMD_DATA_SIZE] = {0x00};
        iso14a_card_select_t *card = (iso14a_card_select_t*)cardbuf;
-       int len = iso14443a_select_card(NULL,card,NULL);
+       
+       int len = iso14443a_select_card(NULL,card,NULL,true,0);
 
        if (!len) {
-               if (MF_DBGLEVEL >= 1) {
+               if (MF_DBGLEVEL >= MF_DBG_ERROR)
                        Dbprintf("Can't select card");
-               }
-               OnError();
+               OnError(1);
                return false;
        }
        return true;
@@ -45,7 +41,7 @@ enum  {
  NONE          =       0x00,
  INIT          =       0x01,
  DISCONNECT =  0x02,
FOO           =       0x04,
CLEARTRACE    =       0x04,
  BAR           =       0x08,
 } CmdOptions ;
 
@@ -53,12 +49,12 @@ void MifareSendCommand(uint8_t arg0, uint8_t arg1, uint8_t *datain){
        
        /* ARG0 contains flags.
                0x01 = init card.
-               0x02 = No Disconnect
+               0x02 = Disconnect
                0x03
        */
        uint8_t flags = arg0;
        size_t datalen = arg1;
-       uint8_t resp[RECV_RES_SIZE];
+       uint8_t resp[RECEIVE_SIZE];
        memset(resp,0,sizeof(resp));
        
        if (MF_DBGLEVEL >= 4) {
@@ -67,18 +63,20 @@ void MifareSendCommand(uint8_t arg0, uint8_t arg1, uint8_t *datain){
                print_result(" RX    : ", datain, datalen);
        }
        
+       if ( flags & CLEARTRACE )
+               clear_trace();
+       
        if ( flags & INIT ){
                if ( !InitDesfireCard() )
                        return;
        }
        
        int len = DesfireAPDU(datain, datalen, resp);
-       print_result(" <--: ", resp, len);      
+       if (MF_DBGLEVEL >= 4)
+               print_result("ERR <--: ", resp, len);
+
        if ( !len ) {
-               if (MF_DBGLEVEL >= 4) {
-                       print_result("ERR <--: ", resp, len);   
-               }
-               OnError();
+               OnError(2);
                return;
        }
        
@@ -94,13 +92,9 @@ void MifareSendCommand(uint8_t arg0, uint8_t arg1, uint8_t *datain){
 void MifareDesfireGetInformation(){
                
        int len = 0;
-       uint8_t resp[USB_CMD_DATA_SIZE];
-       uint8_t dataout[USB_CMD_DATA_SIZE];
-       byte_t cardbuf[USB_CMD_DATA_SIZE];
-       
-       memset(resp,0,sizeof(resp));
-       memset(dataout,0, sizeof(dataout));
-       memset(cardbuf,0,sizeof(cardbuf));
+       uint8_t resp[USB_CMD_DATA_SIZE] = {0x00};
+       uint8_t dataout[USB_CMD_DATA_SIZE] = {0x00};
+       byte_t cardbuf[USB_CMD_DATA_SIZE] = {0x00};
        
        /*
                1 = PCB                                 1
@@ -111,18 +105,18 @@ void MifareDesfireGetInformation(){
                PCB == 0x0A because sending CID byte.
                CID == 0x00 first card?         
        */
-       iso14a_clear_trace();
-       iso14a_set_tracing(TRUE);
+       clear_trace();
+       set_tracing(TRUE);
        iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
        // card select - information
        iso14a_card_select_t *card = (iso14a_card_select_t*)cardbuf;
-       byte_t isOK = iso14443a_select_card(NULL, card, NULL);
-       if (isOK != 1) {
-               if (MF_DBGLEVEL >= 1) {
+       byte_t isOK = iso14443a_select_card(NULL, card, NULL, true, 0);
+       if ( isOK == 0) {
+               if (MF_DBGLEVEL >= MF_DBG_ERROR) {
                        Dbprintf("Can't select card");
                }
-               OnError();
+               OnError(1);
                return;
        }
 
@@ -138,7 +132,7 @@ void MifareDesfireGetInformation(){
        len =  DesfireAPDU(cmd, cmd_len, resp);
        if ( !len ) {
                print_result("ERROR <--: ", resp, len); 
-               OnError();
+               OnError(2);
                return;
        }
        
@@ -151,7 +145,7 @@ void MifareDesfireGetInformation(){
        len =  DesfireAPDU(cmd, cmd_len, resp);
        if ( !len ) {
                print_result("ERROR <--: ", resp, len); 
-               OnError();
+               OnError(2);
                return;
        }       
        
@@ -163,7 +157,7 @@ void MifareDesfireGetInformation(){
        len =  DesfireAPDU(cmd, cmd_len, resp);
        if ( !len ) {
                print_result("ERROR <--: ", resp, len); 
-               OnError();
+               OnError(2);
                return;
        }
        
@@ -178,88 +172,28 @@ void MifareDesfireGetInformation(){
 
 void MifareDES_Auth1(uint8_t mode, uint8_t algo, uint8_t keyno,  uint8_t *datain){
 
-       uint8_t null_key_data[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-       //uint8_t new_key_data[8]  = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77 };
-       int res = 0;
-       
-       desfirekey_t default_key = Desfire_des_key_new_with_version (null_key_data);
+       int len = 0;
+       //uint8_t PICC_MASTER_KEY8[8] = { 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47};
+       uint8_t PICC_MASTER_KEY16[16] = { 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47,0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f };
+       uint8_t null_key_data8[8] = {0x00};
+       //uint8_t null_key_data16[16] = {0x00}; 
+       //uint8_t new_key_data8[8]  = { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77};
+       //uint8_t new_key_data16[16]  = { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF};
 
-       // res = Desfire_select_application (tags[i], aid);
-       if (res < 0) {
-               print_result("default key: ", default_key->data, 24 );
-               return;
-       }
-                               
-       return;
-       //                pcb  cid  cmd               key   crc1  cr2           
-       //uint8_t cmd2[] = {0x02,0x00,GET_KEY_VERSION, 0x00, 0x00, 0x00 };
+       uint8_t resp[256] = {0x00};
+       uint8_t IV[16] = {0x00};
 
-       //uint8_t* bigbuffer = mifare_get_bigbufptr();
-       byte_t isOK = 1;
-       uint8_t resp[256];
-       uint8_t key[24];
-       uint8_t IV[16];
+       size_t datalen = datain[0];
        
-       // första byten håller keylength.
-       uint8_t keylen = datain[0];
-       memcpy(key, datain+1, keylen);
-       
-       if (MF_DBGLEVEL >= 1) {
-               
-               Dbprintf("MODE: %d", mode);
-               Dbprintf("ALGO: %d", algo);
-               Dbprintf("KEYNO: %d", keyno);
-               Dbprintf("KEYLEN: %d", keylen);
-               
-               print_result("KEY", key, keylen);
-       }
-       
-       // card select - information
-       byte_t buf[USB_CMD_DATA_SIZE];
-       iso14a_card_select_t *card = (iso14a_card_select_t*)buf;
-       
-       // test of DES on ARM side.
-       /* 
-       if ( mode == 1){
-               uint8_t IV[8];
-               uint8_t plain[16];
-               uint8_t encData[16];
-
-               uint8_t tmpData[8];
-               uint8_t tmpPlain[8];
-               
-               memset(IV, 0, 8);
-               memset(tmpData, 0 ,8);
-               memset(tmpPlain,0 ,8);
-               memcpy(key, datain, 8);
-               memcpy(plain, datain+30, 16);
-               
-               for(uint8_t i=0; i< sizeof(plain); i=i+8 ){
-               
-                       memcpy(tmpPlain, plain+i, 8);
-                       des_enc( &tmpData, &tmpPlain, &key);
-                       memcpy(encData+i, tmpData, 8);
-               }
-       }
-*/
-
-       iso14a_clear_trace();
-
-       iso14a_set_tracing(TRUE);
-
-       // power up the field
-       iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
-
-       // select the card
-       isOK = iso14443a_select_card(resp, card, NULL);
-       if (isOK != 1) {
-               if (MF_DBGLEVEL >= 1) {
-                       Dbprintf("CAN'T SELECT CARD, SOMETHING WENT WRONG BEFORE AUTH");
-               }
-               OnError();
-               return;
-       }
+       uint8_t cmd[40] = {0x00};
+       uint8_t encRndB[16] = {0x00};
+       uint8_t decRndB[16] = {0x00};
+       uint8_t nonce[16] = {0x00};
+       uint8_t both[32] = {0x00};
+       uint8_t encBoth[32] = {0x00};
 
+       InitDesfireCard();
+       
        LED_A_ON();
        LED_B_OFF();
        LED_C_OFF();
@@ -270,91 +204,298 @@ void MifareDES_Auth1(uint8_t mode, uint8_t algo, uint8_t keyno,  uint8_t *datain
        
        // des, nyckel 0, 
        switch (mode){
-               case 1:
-                       // if ( SendDesfireCommand(AUTHENTICATE, &keyno, resp) > 0 ){
-                               // // fick nonce från kortet
-                       // }
+        case 1:{
+            uint8_t keybytes[16];
+            uint8_t RndA[8] = {0x00};
+            uint8_t RndB[8] = {0x00};
+            
+            if (algo == 2) {
+            if (datain[1] == 0xff){
+                    memcpy(keybytes,PICC_MASTER_KEY16,16);
+                } else {
+                    memcpy(keybytes, datain+1, datalen);
+                }
+            } else {
+                if (algo == 1) {
+                    if (datain[1] == 0xff){
+                memcpy(keybytes,null_key_data8,8);
+            } else{
+                memcpy(keybytes, datain+1, datalen);
+            }
+                }
+            }
+            
+            struct desfire_key defaultkey = {0};
+            desfirekey_t key = &defaultkey;
+            
+            if (algo == 2)
+                Desfire_3des_key_new_with_version(keybytes, key);
+            else if (algo ==1)
+            Desfire_des_key_new(keybytes, key);
+            
+            cmd[0] = AUTHENTICATE;
+            cmd[1] = keyno;  //keynumber
+            len = DesfireAPDU(cmd, 2, resp);
+            if ( !len ) {
+                if (MF_DBGLEVEL >= MF_DBG_ERROR) {
+                    DbpString("Authentication failed. Card timeout.");
+                }
+                OnError(3);
+                return;
+            }
+            
+            if ( resp[2] == 0xaf ){
+            } else {
+                DbpString("Authetication failed. Invalid key number.");
+                OnError(3);
+                return;
+            }
+            
+            memcpy( encRndB, resp+3, 8);
+            if (algo == 2)
+                tdes_dec(&decRndB, &encRndB, key->data);
+            else if (algo == 1)
+            des_dec(&decRndB, &encRndB, key->data);
+            
+            memcpy(RndB, decRndB, 8);
+            rol(decRndB,8);
+            
+            // This should be random
+            uint8_t decRndA[8] = {0x00};
+            memcpy(RndA, decRndA, 8);
+            uint8_t encRndA[8] = {0x00};
+            
+            if (algo == 2)
+                tdes_dec(&encRndA, &decRndA, key->data);
+            else if (algo == 1)
+            des_dec(&encRndA, &decRndA, key->data);
+            
+            memcpy(both, encRndA, 8);
+            
+            for (int x = 0; x < 8; x++) {
+                decRndB[x] = decRndB[x] ^ encRndA[x];
+                
+            }
+            
+            if (algo == 2)
+                tdes_dec(&encRndB, &decRndB, key->data);
+            else if (algo == 1)
+            des_dec(&encRndB, &decRndB, key->data);
+            
+            memcpy(both + 8, encRndB, 8);
+            
+            cmd[0] = ADDITIONAL_FRAME;
+            memcpy(cmd+1, both, 16 );
+            
+            len = DesfireAPDU(cmd, 17, resp);
+            if ( !len ) {
+                if (MF_DBGLEVEL >= MF_DBG_ERROR) {
+                    DbpString("Authentication failed. Card timeout.");
+                }
+                OnError(3);
+                return;
+            }
+            
+            if ( resp[2] == 0x00 ){
+                
+                struct desfire_key sessionKey = {0};
+                desfirekey_t skey = &sessionKey;
+                Desfire_session_key_new( RndA, RndB , key, skey );
+                //print_result("SESSION : ", skey->data, 8);
+                
+                memcpy(encRndA, resp+3, 8);
+                
+                if (algo == 2)
+                    tdes_dec(&encRndA, &encRndA, key->data);
+                else if (algo == 1)
+                des_dec(&encRndA, &encRndA, key->data);
+                
+                rol(decRndA,8);
+                for (int x = 0; x < 8; x++) {
+                    if (decRndA[x] != encRndA[x]) {
+                        DbpString("Authetication failed. Cannot varify PICC.");
+                        OnError(4);
+                        return;
+                    }
+                }
+                
+                //Change the selected key to a new value.
+                /*
+                 
+                 // Current key is a 3DES key, change it to a DES key
+                 if (algo == 2) {
+                cmd[0] = CHANGE_KEY;
+                cmd[1] = keyno;
+                
+                uint8_t newKey[16] = {0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77};
+                
+                uint8_t first, second;
+                uint8_t buff1[8] = {0x00};
+                uint8_t buff2[8] = {0x00};
+                uint8_t buff3[8] = {0x00};
+                
+                memcpy(buff1,newKey, 8);
+                memcpy(buff2,newKey + 8, 8);
+                
+                ComputeCrc14443(CRC_14443_A, newKey, 16, &first, &second);
+                memcpy(buff3, &first, 1);
+                memcpy(buff3 + 1, &second, 1);
+                
+                 tdes_dec(&buff1, &buff1, skey->data);
+                 memcpy(cmd+2,buff1,8);
+                 
+                 for (int x = 0; x < 8; x++) {
+                 buff2[x] = buff2[x] ^ buff1[x];
+                 }
+                 tdes_dec(&buff2, &buff2, skey->data);
+                 memcpy(cmd+10,buff2,8);
+                 
+                 for (int x = 0; x < 8; x++) {
+                 buff3[x] = buff3[x] ^ buff2[x];
+                 }
+                 tdes_dec(&buff3, &buff3, skey->data);
+                 memcpy(cmd+18,buff3,8);
+                 
+                 // The command always times out on the first attempt, this will retry until a response
+                 // is recieved.
+                 len = 0;
+                 while(!len) {
+                 len = DesfireAPDU(cmd,26,resp);
+                 }
+                 
+                 } else {
+                    // Current key is a DES key, change it to a 3DES key
+                    if (algo == 1) {
+                        cmd[0] = CHANGE_KEY;
+                        cmd[1] = keyno;
+                        
+                        uint8_t newKey[16] = {0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47,0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f};
+                        
+                        uint8_t first, second;
+                        uint8_t buff1[8] = {0x00};
+                        uint8_t buff2[8] = {0x00};
+                        uint8_t buff3[8] = {0x00};
+                        
+                        memcpy(buff1,newKey, 8);
+                        memcpy(buff2,newKey + 8, 8);
+                        
+                        ComputeCrc14443(CRC_14443_A, newKey, 16, &first, &second);
+                        memcpy(buff3, &first, 1);
+                        memcpy(buff3 + 1, &second, 1);
+                        
+                des_dec(&buff1, &buff1, skey->data);
+                memcpy(cmd+2,buff1,8);
+                
+                for (int x = 0; x < 8; x++) {
+                    buff2[x] = buff2[x] ^ buff1[x];
+                }
+                des_dec(&buff2, &buff2, skey->data);
+                memcpy(cmd+10,buff2,8);
+                
+                for (int x = 0; x < 8; x++) {
+                    buff3[x] = buff3[x] ^ buff2[x];
+                }
+                des_dec(&buff3, &buff3, skey->data);
+                memcpy(cmd+18,buff3,8);
+                
+                // The command always times out on the first attempt, this will retry until a response
+                // is recieved.
+                len = 0;
+                while(!len) {
+                    len = DesfireAPDU(cmd,26,resp);
+                }
+                    }
+                 }
+                */
+                
+                OnSuccess();
+                if (algo == 2)
+                    cmd_send(CMD_ACK,1,0,0,skey->data,16);
+                else if (algo == 1)
+                cmd_send(CMD_ACK,1,0,0,skey->data,8);
+            } else {
+                DbpString("Authetication failed.");
+                OnError(6);
+                return;
+            }
+            }
                        break;
                case 2:
                        //SendDesfireCommand(AUTHENTICATE_ISO, &keyno, resp);
                        break;
                case 3:{
+               
+                       //defaultkey
+                       uint8_t keybytes[16] = {0x00};
+                       if (datain[1] == 0xff){
+                               memcpy(keybytes,PICC_MASTER_KEY16,16); 
+                       } else{
+                               memcpy(keybytes, datain+1, datalen);
+                       }
+                       
+                       struct desfire_key defaultkey = {0x00};
+                       desfirekey_t key = &defaultkey;
+                       Desfire_aes_key_new( keybytes, key);
+               
                        AesCtx ctx;
-                       if ( AesCtxIni(&ctx, IV, key, KEY128, CBC) < 0 ){
-                               if (MF_DBGLEVEL >= 1) {
+                       if ( AesCtxIni(&ctx, IV, key->data, KEY128, CBC) < 0 ){
+                               if( MF_DBGLEVEL >= 4) {
                                        Dbprintf("AES context failed to init");
                                }
-                               OnError();
+                               OnError(7);
                                return;
                        }
-                       uint8_t real_cmd[6];
-                       real_cmd[0] = 0x90;
-                       real_cmd[1] = 0x02;
-                       real_cmd[2] = AUTHENTICATE_AES;
-                       real_cmd[3] = keyno;
                        
-                       AppendCrc14443a(real_cmd, 4);
-                       ReaderTransmit(real_cmd, sizeof(real_cmd), NULL);
-       
-                       int len = ReaderReceive(resp);
-                       if(!len) {
-                               OnError();
-                               return;
-                       }
-
-                       print_result("RX:", resp, len);
-   
-                       enum DESFIRE_STATUS status = resp[1];
-                       if ( status != ADDITIONAL_FRAME) {
-                               OnError();
+                       cmd[0] = AUTHENTICATE_AES;
+                       cmd[1] = 0x00;  //keynumber
+                       len = DesfireAPDU(cmd, 2, resp);
+                       if ( !len ) {
+                               if (MF_DBGLEVEL >= MF_DBG_ERROR) {
+                                       DbpString("Authentication failed. Card timeout.");
+                               }
+                               OnError(3);
                                return;
                        }
                        
-                       // tags enc nonce
-                       uint8_t encRndB[16];
-                       uint8_t decRndB[16];
-                       uint8_t nonce[16];
-                       uint8_t both[32];
-                       uint8_t encBoth[32];
-
-                       memset(nonce, 0, 16);
-                       memcpy( encRndB, resp+2, 16);
-
+                       memcpy( encRndB, resp+3, 16);
+               
                        // dekryptera tagnonce.
                        AesDecrypt(&ctx, encRndB, decRndB, 16);
-                       
                        rol(decRndB,16);
-                       
                        memcpy(both, nonce,16);
                        memcpy(both+16, decRndB ,16 );
-
                        AesEncrypt(&ctx, both, encBoth, 32 );
-
-                       uint8_t real_cmd_A[36];
-                       real_cmd_A[0] = 0x03;
-                       real_cmd_A[1] = ADDITIONAL_FRAME;
                        
-                       memcpy(real_cmd_A+2, encBoth, sizeof(encBoth) );
-                       AppendCrc14443a(real_cmd_A, 34);
-                       ReaderTransmit(real_cmd_A, sizeof(real_cmd_A), NULL);
-               
-                       len = ReaderReceive(resp);
-
-                       print_result("Auth1a ", resp, 36);
+                       cmd[0] = ADDITIONAL_FRAME;
+                       memcpy(cmd+1, encBoth, 32 );
                        
-                       status = resp[1];
-                       if ( status != OPERATION_OK)    {
-                               Dbprintf("Cmd Error: %02x  Len: %d", status,len);
-                               OnError();
+                       len = DesfireAPDU(cmd, 33, resp);  // 1 + 32 == 33
+                       if ( !len ) {
+                               if (MF_DBGLEVEL >= MF_DBG_ERROR) {
+                                       DbpString("Authentication failed. Card timeout.");
+                               }
+                OnError(3);
                                return;
                        }
-                               
-                               break;
+                       
+                       if ( resp[2] == 0x00 ){
+                               // Create AES Session key               
+                               struct desfire_key sessionKey = {0};
+                               desfirekey_t skey = &sessionKey;
+                               Desfire_session_key_new( nonce, decRndB , key, skey );
+                               print_result("SESSION : ", skey->data, 16);
+                       } else {
+                               DbpString("Authetication failed.");
+                               OnError(7);
+                               return;
                        }
                        
+                       break;
+               }       
        }
        
-       OnSuccess(resp);
+       OnSuccess();
+       cmd_send(CMD_ACK,1,len,0,resp,len);
 }
 
 // 3 olika ISO sätt att skicka data till DESFIRE (direkt, inkapslat, inkapslat ISO)
@@ -363,9 +504,12 @@ void MifareDES_Auth1(uint8_t mode, uint8_t algo, uint8_t keyno,  uint8_t *datain
 // dataout = pointer to response data array
 int DesfireAPDU(uint8_t *cmd, size_t cmd_len, uint8_t *dataout){
 
-       uint32_t status = 0;
+       size_t len = 0;
        size_t wrappedLen = 0;
-       uint8_t wCmd[USB_CMD_DATA_SIZE];
+       uint8_t wCmd[USB_CMD_DATA_SIZE] = {0x00};
+       
+       uint8_t resp[MAX_FRAME_SIZE];
+    uint8_t par[MAX_PARITY_SIZE];
        
        wrappedLen = CreateAPDU( cmd, cmd_len, wCmd);
        
@@ -374,21 +518,24 @@ int DesfireAPDU(uint8_t *cmd, size_t cmd_len, uint8_t *dataout){
        }
        ReaderTransmit( wCmd, wrappedLen, NULL);
 
-       status = ReaderReceive(dataout);
+       len = ReaderReceive(resp, par);
        
-       if(!status){
+       if ( !len ) {
+               if (MF_DBGLEVEL >= 4) Dbprintf("fukked");
                return FALSE; //DATA LINK ERROR
        }
        // if we received an I- or R(ACK)-Block with a block number equal to the
        // current block number, toggle the current block number
-       else if (status >= 4 // PCB+CID+CRC = 4 bytes
-                && ((dataout[0] & 0xC0) == 0 // I-Block
-                    || (dataout[0] & 0xD0) == 0x80) // R-Block with ACK bit set to 0
-                && (dataout[0] & 0x01) == pcb_blocknum) // equal block numbers
+       else if (len >= 4 // PCB+CID+CRC = 4 bytes
+                && ((resp[0] & 0xC0) == 0 // I-Block
+                    || (resp[0] & 0xD0) == 0x80) // R-Block with ACK bit set to 0
+                && (resp[0] & 0x01) == pcb_blocknum) // equal block numbers
        {
                pcb_blocknum ^= 1;  //toggle next block 
        }
-       return status;
+
+       memcpy(dataout, resp, len);
+       return len;
 }      
 
 // CreateAPDU
@@ -401,7 +548,7 @@ size_t CreateAPDU( uint8_t *datain, size_t len, uint8_t *dataout){
        
        cmd[0] = 0x0A;  //  0x0A = skicka cid,  0x02 = ingen cid. Särskilda bitar //
        cmd[0] |= pcb_blocknum; // OR the block number into the PCB     
-       cmd[1] = 0x00;  //  CID: 0x00 //FIXME: allow multiple selected cards
+       cmd[1] = 0x00;  //  CID: 0x00 //TODO: allow multiple selected cards
        
        memcpy(cmd+2, datain, len);
        AppendCrc14443a(cmd, len+2);
@@ -411,175 +558,20 @@ size_t CreateAPDU( uint8_t *datain, size_t len, uint8_t *dataout){
        return cmdlen;
 }
 
-                       // crc_update(&desfire_crc32, 0, 1); /* CMD_WRITE */
-                       // crc_update(&desfire_crc32, addr, addr_sz);
-                       // crc_update(&desfire_crc32, byte, 8);
-                       // uint32_t crc = crc_finish(&desfire_crc32);
-                       
-
-       /* Version
-       
-       //uint8_t versionCmd1[] = {0x02, 0x60};
-       //uint8_t versionCmd2[] = {0x03, 0xaf};
-       //uint8_t versionCmd3[] = {0x02, 0xaf};
-
-    // AUTH 1  -  CMD: 0x02, 0x0A, 0x00  = Auth
-       // 0x02 = status byte för simpla svar?!? 
-       // 0x0a = krypto typ
-       // 0x00 = key nr
-       //uint8_t initAuthCmdDES[]  = {0x02, 0x0a, 0x00};  // DES
-       //uint8_t initAuthCmd3DES[] = {0x02, 0x1a, 0x00};  // 3DES
-       //uint8_t initAuthCmdAES[]  = {0x02, 0xaa, 0x00};  // AES
-       // auth 1 - answer command
-       // 0x03 = status byte för komplexa typer?
-       // 0xaf = additional frame
-       // LEN = 1+1+32+2 = 36
-       //uint8_t answerAuthCmd[34] = {0x03, 0xaf}; 
-
-       // Lägg till CRC
-       //AppendCrc14443a(versionCmd1,sizeof(versionCmd1));
-*/
-
-       // Sending commands
-       /*ReaderTransmit(versionCmd1,sizeof(versionCmd1)+2, NULL);
-       len = ReaderReceive(buffer);
-       print_result("Get Version 3", buffer, 9);
-       */
-       
-       // for( int i = 0; i < 8; i++){
-               // // Auth 1 - Request authentication
-               // ReaderTransmit(initAuthCmdAES,sizeof(initAuthCmdAES)+2, NULL);
-               // //len = ReaderReceive(buffer);
-
-               // // 0xAE =  authentication error
-               // if (buffer[1] == 0xae)       {
-                               // Dbprintf("Cmd Error: %02x", buffer[1]);
-                               // OnError();
-                               // return;
-               // }
-
-               // // tags enc nonce
-               // memcpy(encRndB, buffer+2, 16);
-
-               // // dekryptera svaret från tag.
-               // AesDecrypt(&ctx, encRndB, decRndB, 16);
-
-               // rol8(decRndB,16);
-               // memcpy(RndARndB, RndA,16);
-               // memcpy(RndARndB+16, decRndB ,16 );
-
-               // AesEncrypt(&ctx, RndARndB, encRndARndB, 32 );
-
-               // memcpy(answerAuthCmd+2, encRndARndB, 32);
-               // AppendCrc14443a(answerAuthCmd,sizeof(answerAuthCmd));
-       
-               // ReaderTransmit(answerAuthCmd,sizeof(answerAuthCmd)+2, NULL);
-
-               // len = ReaderReceive(buffer);
-
-               // print_result("Auth1a ", buffer, 8);
-               // Dbprintf("Rx len: %02x", len);
-
-               // if (buffer[1] == 0xCA)       {
-                               // Dbprintf("Cmd Error: %02x  Len: %d", buffer[1],len);
-                               // cmd_send(CMD_ACK,0,0,0,0,0);
-                               // key[1] = i;
-                               // AesCtxIni(&ctx, iv, key, KEY128, CBC);
-               // }
-       // }
-
-       //des_dec(decRndB, encRndB, key);
-       
-    //Do crypto magic
-       /*
-    DES_ede2_cbc_encrypt(e_RndB,RndB,sizeof(e_RndB),&ks1,&ks2,&iv,0);
-    memcpy(RndARndB,RndA,8);
-    memcpy(RndARndB+8,RndB,8);
-    PrintAndLog("     RA+B:%s",sprint_hex(RndARndB, 16));
-    DES_ede2_cbc_encrypt(RndARndB,RndARndB,sizeof(RndARndB),&ks1,&ks2,&e_RndB,1);
-    PrintAndLog("enc(RA+B):%s",sprint_hex(RndARndB, 16));
-    */
-
-
-int mifare_des_auth2(uint32_t uid, uint8_t *key, uint8_t *blockData){
-       
-       uint8_t* buffer = mifare_get_bigbufptr();
-       uint8_t dcmd[19];
-    
-       dcmd[0] = 0xAF;
-    memcpy(dcmd+1,key,16);
-       AppendCrc14443a(dcmd, 17);
-       
-
-       ReaderTransmit(dcmd, sizeof(dcmd), NULL);
-       int len = ReaderReceive(buffer);
-       if(!len) {
-          if (MF_DBGLEVEL >= 1)   Dbprintf("Authentication failed. Card timeout.");
-          len = ReaderReceive(buffer);
-    }
-    
-       if(len==1)      {
-        if (MF_DBGLEVEL >= 1) {
-                       Dbprintf("NAK - Authentication failed.");
-                       Dbprintf("Cmd Error: %02x", buffer[0]);
-               }
-               return 1;
-       }
-
-       if (len == 11){
-               if (MF_DBGLEVEL >= 1) {
-                       Dbprintf("Auth2 Resp: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
-                                         buffer[0],buffer[1],buffer[2],buffer[3],buffer[4],
-                                         buffer[5],buffer[6],buffer[7],buffer[8],buffer[9],
-                                         buffer[10]);
-               }
-               return 0;
-       }
-       return 1;
-}
-
-void MifareDES_Auth2(uint32_t arg0, uint8_t *datain){
-
-       return;
-       uint32_t cuid = arg0;
-       uint8_t key[16];
-
-       byte_t isOK = 0;
-       byte_t dataoutbuf[16];
-       
-    memset(key, 0, 16);
-       memcpy(key, datain, 16);
-    
-       LED_A_ON();
-       LED_B_OFF();
-       LED_C_OFF();
-
-       if(mifare_des_auth2(cuid, key, dataoutbuf)){
-           if (MF_DBGLEVEL >= 1) Dbprintf("Authentication part2: Fail...");    
-       }
-       isOK=1;
-       if (MF_DBGLEVEL >= 2)   DbpString("AUTH 2 FINISHED");
-    
-       LED_B_ON();
-    cmd_send(CMD_ACK,isOK,0,0,dataoutbuf,11);
-       LED_B_OFF();
-    
-    // Thats it...
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-       LEDsoff();
-}
+       // crc_update(&desfire_crc32, 0, 1); /* CMD_WRITE */
+       // crc_update(&desfire_crc32, addr, addr_sz);
+       // crc_update(&desfire_crc32, byte, 8);
+       // uint32_t crc = crc_finish(&desfire_crc32);
 
 void OnSuccess(){
        pcb_blocknum = 0;
        ReaderTransmit(deselect_cmd, 3 , NULL);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        LEDsoff();
+       set_tracing(FALSE);     
 }
 
-void OnError(){
-       pcb_blocknum = 0;
-       ReaderTransmit(deselect_cmd, 3 , NULL);
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-       cmd_send(CMD_ACK,0,0,0,0,0);
-       LEDsoff();
+void OnError(uint8_t reason){
+       cmd_send(CMD_ACK,0,reason,0,0,0);
+       OnSuccess();
 }
Impressum, Datenschutz