//-----------------------------------------------------------------------------
// Copyright (C) 2010 iZsh <izsh at fail0verflow.com>
-// Modified 2010 by <adrian -at- atrox.at>
-// Modified 2010, 2011 by <adrian -at- atrox.at>
+// Modified 2010-2012 by <adrian -at- atrox.at>
// Modified 2012 by <vsza at vsza.hu>
//
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
#include <stdlib.h>
#include <string.h>
#include <stdint.h>
-#include "proxusb.h"
+//#include "proxusb.h"
+#include "proxmark3.h"
#include "data.h"
#include "graph.h"
#include "ui.h"
const productName uidmapping[] = {
+ // UID, #significant Bits, "Vendor(+Product)"
{ 0xE001000000000000LL, 16, "Motorola" },
{ 0xE002000000000000LL, 16, "ST Microelectronics" },
{ 0xE003000000000000LL, 16, "Hitachi" },
{ 0xE007000000000000LL, 16, "Texas Instrument; " },
{ 0xE007000000000000LL, 20, "Texas Instrument; Tag-it HF-I Plus Inlay; 64x32bit" },
{ 0xE007100000000000LL, 20, "Texas Instrument; Tag-it HF-I Plus Chip; 64x32bit" },
+ { 0xE007800000000000LL, 23, "Texas Instrument; Tag-it HF-I Plus (RF-HDT-DVBB tag or Third Party Products)" },
{ 0xE007C00000000000LL, 23, "Texas Instrument; Tag-it HF-I Standard; 8x32bit" },
{ 0xE007C40000000000LL, 23, "Texas Instrument; Tag-it HF-I Pro; 8x23bit; password" },
{ 0xE008000000000000LL, 16, "Fujitsu" },
{ 0xE010000000000000LL, 16, "LG-Semiconductors" },
{ 0xE012000000000000LL, 16, "HID Corporation" },
{ 0xE016000000000000LL, 16, "EM-Marin SA (Skidata)" },
- { 0xE016040000000000LL, 24, "EM-Marin SA (Skidata Keycard-eco); no memory" },
+ { 0xE016040000000000LL, 24, "EM-Marin SA (Skidata Keycard-eco); EM4034? no 'read', just 'readmulti'" },
+ { 0xE0160c0000000000LL, 24, "EM-Marin SA; EM4035?" },
{ 0xE016100000000000LL, 24, "EM-Marin SA (Skidata); EM4135; 36x64bit start page 13" },
+ { 0xE016940000000000LL, 24, "EM-Marin SA (Skidata); 51x64bit" },
{ 0,0,"no tag-info available" } // must be the last entry
};
// returns 1 if suceeded
int getUID(uint8_t *buf)
{
- UsbCommand *r;
+ UsbCommand resp;
uint8_t *recv;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
uint8_t *req=c.d.asBytes;
SendCommand(&c);
- r=WaitForResponseTimeout(CMD_ACK,1000);
-
- if (r!=NULL) {
- recv = r->d.asBytes;
- if (r->arg[0]>=12 && ISO15_CRC_CHECK==Crc(recv,12)) {
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
+ recv = resp.d.asBytes;
+ if (resp.arg[0]>=12 && ISO15_CRC_CHECK==Crc(recv,12)) {
memcpy(buf,&recv[2],8);
return 1;
}
// Reads all memory pages
int CmdHF15DumpMem(const char*Cmd) {
- UsbCommand *r;
+ UsbCommand resp;
uint8_t uid[8];
uint8_t *recv=NULL;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
SendCommand(&c);
- r=WaitForResponseTimeout(CMD_ACK,1000);
-
- if (r!=NULL) {
- recv = r->d.asBytes;
- if (ISO15_CRC_CHECK==Crc(recv,r->arg[0])) {
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
+ recv = resp.d.asBytes;
+ if (ISO15_CRC_CHECK==Crc(recv,resp.arg[0])) {
if (!(recv[0] & ISO15_RES_ERROR)) {
retry=0;
*output=0; // reset outputstring
sprintf(output, "Block %2i ",blocknum);
- for ( int i=1; i<r->arg[0]-2; i++) { // data in hex
+ for ( int i=1; i<resp.arg[0]-2; i++) { // data in hex
sprintf(output+strlen(output),"%02hX ",recv[i]);
}
strcat(output," ");
- for ( int i=1; i<r->arg[0]-2; i++) { // data in cleaned ascii
+ for ( int i=1; i<resp.arg[0]-2; i++) { // data in cleaned ascii
sprintf(output+strlen(output),"%c",(recv[i]>31 && recv[i]<127)?recv[i]:'.');
}
PrintAndLog("%s",output);
}
} // else PrintAndLog("crc");
} // else PrintAndLog("r null");
-
} // retry
- if (r && r->arg[0]<3)
- PrintAndLog("Lost Connection");
- else if (r && ISO15_CRC_CHECK!=Crc(r->d.asBytes,r->arg[0]))
- PrintAndLog("CRC Failed");
- else
- PrintAndLog("Tag returned Error %i: %s",recv[1],TagErrorStr(recv[1]));
+ // TODO: need fix
+// if (resp.arg[0]<3)
+// PrintAndLog("Lost Connection");
+// else if (ISO15_CRC_CHECK!=Crc(resp.d.asBytes,resp.arg[0]))
+// PrintAndLog("CRC Failed");
+// else
+// PrintAndLog("Tag returned Error %i: %s",recv[1],TagErrorStr(recv[1]));
return 0;
}
int CmdHF15CmdInquiry(const char *Cmd)
{
- UsbCommand *r;
+ UsbCommand resp;
uint8_t *recv;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
uint8_t *req=c.d.asBytes;
SendCommand(&c);
- r=WaitForResponseTimeout(CMD_ACK,1000);
-
- if (r!=NULL) {
- if (r->arg[0]>=12) {
- recv = r->d.asBytes;
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
+ if (resp.arg[0]>=12) {
+ recv = resp.d.asBytes;
PrintAndLog("UID=%s",sprintUID(NULL,&recv[2]));
PrintAndLog("Tag Info: %s",getTagInfo(&recv[2]));
} else {
- PrintAndLog("Response to short, just %i bytes. No tag?\n",r->arg[0]);
+ PrintAndLog("Response to short, just %i bytes. No tag?\n",resp.arg[0]);
}
} else {
PrintAndLog("timeout.");
int CmdHF15CmdRaw (const char *cmd) {
- UsbCommand *r;
+ UsbCommand resp;
uint8_t *recv;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
int reply=1;
SendCommand(&c);
if (reply) {
- r=WaitForResponseTimeout(CMD_ACK,1000);
-
- if (r!=NULL) {
- recv = r->d.asBytes;
- PrintAndLog("received %i octets",r->arg[0]);
- hexout = (char *)malloc(r->arg[0] * 3 + 1);
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
+ recv = resp.d.asBytes;
+ PrintAndLog("received %i octets",resp.arg[0]);
+ hexout = (char *)malloc(resp.arg[0] * 3 + 1);
if (hexout != NULL) {
- for (int i = 0; i < r->arg[0]; i++) { // data in hex
+ for (int i = 0; i < resp.arg[0]; i++) { // data in hex
sprintf(&hexout[i * 3], "%02hX ", recv[i]);
}
PrintAndLog("%s", hexout);
}
+/**
+ * parses common HF 15 CMD parameters and prepares some data structures
+ * Parameters:
+ * **cmd command line
+ */
int prepareHF15Cmd(char **cmd, UsbCommand *c, uint8_t iso15cmd[], int iso15cmdlen) {
int temp;
uint8_t *req=c->d.asBytes, uid[8];
return 1;
}
-
-
/**
* Commandline handling: HF15 CMD SYSINFO
* get system information from tag/VICC
*/
int CmdHF15CmdSysinfo(const char *Cmd) {
- UsbCommand *r;
+ UsbCommand resp;
uint8_t *recv;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
uint8_t *req=c.d.asBytes;
// usage:
if (strlen(cmd)<1) {
- PrintAndLog("Usage: hf 15 cmd sysinfo [options] <uid|s|*>");
+ PrintAndLog("Usage: hf 15 cmd sysinfo [options] <uid|s|u|*>");
PrintAndLog(" options:");
PrintAndLog(" -2 use slower '1 out of 256' mode");
PrintAndLog(" uid (either): ");
SendCommand(&c);
- r=WaitForResponseTimeout(CMD_ACK,1000);
-
- if (r!=NULL && r->arg[0]>2) {
- recv = r->d.asBytes;
- if (ISO15_CRC_CHECK==Crc(recv,r->arg[0])) {
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1000) && resp.arg[0]>2) {
+ recv = resp.d.asBytes;
+ if (ISO15_CRC_CHECK==Crc(recv,resp.arg[0])) {
if (!(recv[0] & ISO15_RES_ERROR)) {
*output=0; // reset outputstring
- for ( i=1; i<r->arg[0]-2; i++) {
+ for ( i=1; i<resp.arg[0]-2; i++) {
sprintf(output+strlen(output),"%02hX ",recv[i]);
}
strcat(output,"\n\r");
return 0;
}
-
/**
* Commandline handling: HF15 CMD READMULTI
* Read multiple blocks at once (not all tags support this)
*/
int CmdHF15CmdReadmulti(const char *Cmd) {
- UsbCommand *r;
+ UsbCommand resp;
uint8_t *recv;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
uint8_t *req=c.d.asBytes;
// usage:
if (strlen(cmd)<3) {
- PrintAndLog("Usage: hf 15 cmd readmulti [options] <uid|s|*> <start#> <count#>");
+ PrintAndLog("Usage: hf 15 cmd readmulti [options] <uid|s|u|*> <start#> <count#>");
PrintAndLog(" options:");
PrintAndLog(" -2 use slower '1 out of 256' mode");
PrintAndLog(" uid (either): ");
c.arg[0]=reqlen;
SendCommand(&c);
-
- r=WaitForResponseTimeout(CMD_ACK,1000);
-
- if (r!=NULL && r->arg[0]>2) {
- recv = r->d.asBytes;
- if (ISO15_CRC_CHECK==Crc(recv,r->arg[0])) {
+
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1000) && resp.arg[0]>2) {
+ recv = resp.d.asBytes;
+ if (ISO15_CRC_CHECK==Crc(recv,resp.arg[0])) {
if (!(recv[0] & ISO15_RES_ERROR)) {
*output=0; // reset outputstring
- for ( int i=1; i<r->arg[0]-2; i++) {
+ for ( int i=1; i<resp.arg[0]-2; i++) {
sprintf(output+strlen(output),"%02hX ",recv[i]);
}
strcat(output," ");
- for ( int i=1; i<r->arg[0]-2; i++) {
+ for ( int i=1; i<resp.arg[0]-2; i++) {
sprintf(output+strlen(output),"%c",recv[i]>31 && recv[i]<127?recv[i]:'.');
}
PrintAndLog("%s",output);
return 0;
}
-
/**
* Commandline handling: HF15 CMD READ
* Reads a single Block
*/
int CmdHF15CmdRead(const char *Cmd) {
- UsbCommand *r;
+ UsbCommand resp;
uint8_t *recv;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
uint8_t *req=c.d.asBytes;
// usage:
if (strlen(cmd)<3) {
- PrintAndLog("Usage: hf 15 cmd read [options] <uid|s|*> <page#>");
+ PrintAndLog("Usage: hf 15 cmd read [options] <uid|s|
u|*> <page#>");
PrintAndLog(" options:");
PrintAndLog(" -2 use slower '1 out of 256' mode");
PrintAndLog(" uid (either): ");
SendCommand(&c);
- r=WaitForResponseTimeout(CMD_ACK,1000);
-
- if (r!=NULL && r->arg[0]>2) {
- recv = r->d.asBytes;
- if (ISO15_CRC_CHECK==Crc(recv,r->arg[0])) {
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1000) && resp.arg[0]>2) {
+ recv = resp.d.asBytes;
+ if (ISO15_CRC_CHECK==Crc(recv,resp.arg[0])) {
if (!(recv[0] & ISO15_RES_ERROR)) {
*output=0; // reset outputstring
//sprintf(output, "Block %2i ",blocknum);
- for ( int i=1; i<r->arg[0]-2; i++) {
+ for ( int i=1; i<resp.arg[0]-2; i++) {
sprintf(output+strlen(output),"%02hX ",recv[i]);
}
strcat(output," ");
- for ( int i=1; i<r->arg[0]-2; i++) {
+ for ( int i=1; i<resp.arg[0]-2; i++) {
sprintf(output+strlen(output),"%c",recv[i]>31 && recv[i]<127?recv[i]:'.');
}
PrintAndLog("%s",output);
* Writes a single Block - might run into timeout, even when successful
*/
int CmdHF15CmdWrite(const char *Cmd) {
- UsbCommand *r;
+ UsbCommand resp;
uint8_t *recv;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
uint8_t *req=c.d.asBytes;
// usage:
if (strlen(cmd)<3) {
- PrintAndLog("Usage: hf 15 cmd write [options] <uid|s|*> <page#> <hexdata>");
+ PrintAndLog("Usage: hf 15 cmd write [options] <uid|s|
u|*> <page#> <hexdata>");
PrintAndLog(" options:");
PrintAndLog(" -2 use slower '1 out of 256' mode");
PrintAndLog(" -o set OPTION Flag (needed for TI)");
SendCommand(&c);
- r=WaitForResponseTimeout(CMD_ACK,2000);
-
- if (r!=NULL && r->arg[0]>2) {
- recv = r->d.asBytes;
- if (ISO15_CRC_CHECK==Crc(recv,r->arg[0])) {
+ if (WaitForResponseTimeout(CMD_ACK,&resp,2000) && resp.arg[0]>2) {
+ recv = resp.d.asBytes;
+ if (ISO15_CRC_CHECK==Crc(recv,resp.arg[0])) {
if (!(recv[0] & ISO15_RES_ERROR)) {
PrintAndLog("OK");
} else {
{"read", CmdHF15CmdRead, 0, "Read a block"},
{"write", CmdHF15CmdWrite, 0, "Write a block"},
{"readmulti",CmdHF15CmdReadmulti, 0, "Reads multiple Blocks"},
- {"sysinfo", CmdHF15CmdSysinfo, 0, "Get Card Information"},
+ {"sysinfo",CmdHF15CmdSysinfo, 0, "Get Card Information"},
{"raw", CmdHF15CmdRaw, 0, "Send raw hex data to tag"},
{"debug", CmdHF15CmdDebug, 0, "Turn debugging on/off"},
{NULL, NULL, 0, NULL}
projects / proxmark3-svn / blobdiff