Remove include statement that causes trouble (fix #151).

[proxmark3-svn] / CHANGELOG.md

diff --git a/CHANGELOG.md b/CHANGELOG.md
index 955f1517504edae927b86434a791865512c854c8..b662caf3c749134fd1e6c9af9c8dfd523456e00a 100644 (file)
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -5,19 +5,51 @@ This project uses the changelog in accordance with [keepchangelog](http://keepac
 ## [unreleased][unreleased]
 
 ### Added
 ## [unreleased][unreleased]
 
 ### Added

+- `lf t55xx bruteforce <start password> <end password> [i <*.dic>]` - Simple bruteforce attack to find password - (iceman and others)
+- `lf viking clone`- clone viking tag to t55x7 or Q5 from 4byte hex ID input 
+- `lf viking sim`  - sim full viking tag from 4byte hex ID input
+- `lf viking read` - read viking tag and output ID
+- `lf t55xx wipe`  - sets t55xx back to factory defaults
+- Added viking demod to `lf search` (marshmellow)
+- `data askvikingdemod` demod viking id tag from graphbuffer (marshmellow)
+- `lf t55xx resetread` added reset then read command - should allow determining start
+of stream transmissions (marshmellow)
+- `lf t55xx wakeup` added wake with password (AOR) to allow lf search or standard lf read after (iceman, marshmellow)

 - `hf iclass managekeys` to save, load and manage iclass keys.  (adjusted most commands to accept a loaded key in memory) (marshmellow)
 - `hf iclass readblk` to select, authenticate, and read 1 block from an iclass card (marshmellow)
 - `hf iclass managekeys` to save, load and manage iclass keys.  (adjusted most commands to accept a loaded key in memory) (marshmellow)
 - `hf iclass readblk` to select, authenticate, and read 1 block from an iclass card (marshmellow)

-- `hf iclass writeblk` to select, authenticate, adn write 1 block to an iclass card (or picopass) (marshmellow + others)
+- `hf iclass writeblk` to select, authenticate, and write 1 block to an iclass card (or picopass) (marshmellow + others)

 - `hf iclass clone` to take a saved dump file and clone selected blocks to a new tag (marshmellow + others)
 - `hf iclass calcnewkey` - to calculate the div_key change to change a key - (experimental) (marshmellow + others)
 - `hf iclass encryptblk` - to encrypt a data block hex to prep for writing that block (marshmellow)
 - ISO14443a stand-alone operation with ARM CFLAG="WITH_ISO14443a_StandAlone". This code can read & emulate two banks of 14a tag UIDs and write to "magic" cards  (Craig Young) 
 - AWID26 command context added as 'lf awid' containing realtime demodulation as well as cloning/simulation based on tag numbers (Craig Young)
 - `hf iclass clone` to take a saved dump file and clone selected blocks to a new tag (marshmellow + others)
 - `hf iclass calcnewkey` - to calculate the div_key change to change a key - (experimental) (marshmellow + others)
 - `hf iclass encryptblk` - to encrypt a data block hex to prep for writing that block (marshmellow)
 - ISO14443a stand-alone operation with ARM CFLAG="WITH_ISO14443a_StandAlone". This code can read & emulate two banks of 14a tag UIDs and write to "magic" cards  (Craig Young) 
 - AWID26 command context added as 'lf awid' containing realtime demodulation as well as cloning/simulation based on tag numbers (Craig Young)

+- Added 'hw status'. This command makes the ARM print out some runtime information. (holiman) 
+- Added 'hw ping'. This command just sends a usb packets and checks if the pm3 is responsive. Can be used to abort certain operations which supports abort over usb. (holiman)
+- Added `data hex2bin` and `data bin2hex` for command line conversion between binary and hexadecimal (holiman)
+- Added 'hf snoop'. This command take digitalized signal from FPGA and put in BigBuffer. (pwpiwi + enio)
+- Added Topaz (NFC type 1) protocol support ('hf topaz reader', 'hf list topaz', 'hf 14a raw -T', 'hf topaz snoop'). (piwi)
+- Added option c to 'hf list' (mark CRC bytes) (piwi)

 
 ### Changed
 
 ### Changed

+- Added `[l] <length>` option to data printdemodbuffer
+- Adjusted lf awid clone to optionally clone to Q5 tags
+- Adjusted lf t55xx detect to find Q5 tags (t5555) instead of just t55x7
+- Adjusted all lf NRZ demods - works more acurately and consistantly (as long as you have strong signal)
+- Adjusted lf pskindalademod to reduce false positive reads.
+- Small adjustments to psk, nrz, and ask clock detect routines - more reliable.
+- Adjusted lf em410x em410xsim to accept a clock argument
+- Adjusted lf t55xx dump to allow overriding the safety check and warning text (marshmellow)
+- Adjusted lf t55xx write input variables (marshmellow)
+- Adjusted lf t55xx read with password safety check and warning text and adjusted the input variables (marshmellow & iceman)
+- Adjusted LF FSK demod to account for cross threshold fluctuations (898 count waves will adjust the 9 to 8 now...) more accurate.
+- Adjusted timings for t55xx commands.  more reliable now. (marshmellow & iceman)
+- `lf cmdread` adjusted input methods and added help text (marshmellow & iceman)

 - changed `lf config t <threshold>` to be 0 - 128 and will trigger on + or - threshold value (marshmellow) 
 - `hf iclass dump` cli options - can now dump AA1 and AA2 with different keys in one run (does not go to muliple pages for the larger tags yet)
 - changed `lf config t <threshold>` to be 0 - 128 and will trigger on + or - threshold value (marshmellow) 
 - `hf iclass dump` cli options - can now dump AA1 and AA2 with different keys in one run (does not go to muliple pages for the larger tags yet)

+- Revised workflow for StandAloneMode14a (Craig Young)

 - EPA functions (`hf epa`) now support both ISO 14443-A and 14443-B cards (frederikmoellers)
 - EPA functions (`hf epa`) now support both ISO 14443-A and 14443-B cards (frederikmoellers)

+- 'hw version' only talks to ARM at startup, after that the info is cached. (pwpiwi)
+- Added `r` option to iclass functions - allows key to be provided in raw block 3/4 format 

 
 ## [2.2.0][2015-07-12]
 
 
 ## [2.2.0][2015-07-12]