return &config;
}
-typedef struct {
+struct BitstreamOut {
uint8_t * buffer;
uint32_t numbits;
uint32_t position;
-} BitstreamOut;
+};
/**
* @brief Pushes bit onto the stream
* @param silent - is true, now outputs are made. If false, dbprints the status
* @return the number of bits occupied by the samples.
*/
-uint32_t DoAcquisition(uint8_t decimation, uint32_t bits_per_sample, bool averaging, int trigger_threshold,bool silent) {
+uint32_t DoAcquisition(uint8_t decimation, uint32_t bits_per_sample, bool averaging, int trigger_threshold, bool silent) {
//bigbuf, to hold the aquired raw data signal
uint8_t *dest = BigBuf_get_addr();
uint16_t bufsize = BigBuf_max_traceLen();
* @return number of bits sampled
**/
uint32_t SampleLF(bool printCfg) {
- return ReadLF(true, printCfg);
+ BigBuf_Clear_ext(false);
+ uint32_t ret = ReadLF(true, printCfg);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ return ret;
}
/**
* Initializes the FPGA for snoop-mode (field off), and acquires the samples.
* @return number of bits sampled
**/
uint32_t SnoopLF() {
- return ReadLF(false, true);
+ BigBuf_Clear_ext(false);
+ uint32_t ret = ReadLF(false, true);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ return ret;
}
/**
while(!BUTTON_PRESS() && !usb_poll_validate_length() && skipCnt < 1000 && (i < bufsize) ) {
WDT_HIT();
if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
- AT91C_BASE_SSC->SSC_THR = 0x43;
+ AT91C_BASE_SSC->SSC_THR = 0x43; //43
LED_D_ON();
}
if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
skipCnt++;
continue;
}
- // skip until the first Low sample below threshold
+ // skip until the first low sample below threshold
if (!startFound && curSample < T55xx_READ_LOWER_THRESHOLD) {
//if (curSample > lastSample)
lastSample = curSample;