iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
// free eventually allocated BigBuf memory\r
- BigBuf_free();\r
+ BigBuf_free(); BigBuf_Clear_ext(false);\r
clear_trace();\r
set_tracing(true);\r
\r
// Mifare Classic Cards" in Proceedings of the 22nd ACM SIGSAC Conference on \r
// Computer and Communications Security, 2015\r
//-----------------------------------------------------------------------------\r
+#define AUTHENTICATION_TIMEOUT 848 // card times out 1ms after wrong authentication (according to NXP documentation)\r
+#define PRE_AUTHENTICATION_LEADTIME 400 // some (non standard) cards need a pause after select before they are ready for first authentication \r
+\r
void MifareAcquireEncryptedNonces(uint32_t arg0, uint32_t arg1, uint32_t flags, uint8_t *datain)\r
{\r
uint64_t ui64Key = 0;\r
bool slow = flags & 0x0002;\r
bool field_off = flags & 0x0004;\r
\r
- #define AUTHENTICATION_TIMEOUT 848 // card times out 1ms after wrong authentication (according to NXP documentation)\r
- #define PRE_AUTHENTICATION_LEADTIME 400 // some (non standard) cards need a pause after select before they are ready for first authentication \r
- \r
LED_A_ON();\r
LED_C_OFF();\r
\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
// free eventually allocated BigBuf memory\r
- BigBuf_free();\r
-\r
+ BigBuf_free(); BigBuf_Clear_ext(false);\r
+ \r
if (calibrate) clear_trace();\r
set_tracing(true);\r
\r
\r
nttmp = prng_successor(nt1, 100); //NXP Mifare is typical around 840,but for some unlicensed/compatible mifare card this can be 160\r
for (i = 101; i < 1200; i++) {\r
- nttmp = prng_successor_one(nttmp);\r
+ nttmp = prng_successor(nttmp, 1);\r
if (nttmp == nt2) break;\r
}\r
\r
ncount = 0;\r
nttest = prng_successor(nt1, dmin - 1);\r
for (j = dmin; j < dmax + 1; j++) {\r
- nttest = prng_successor_one(nttest);\r
+ nttest = prng_successor(nttest, 1);\r
ks1 = nt2 ^ nttest;\r
\r
if (valid_nonce(nttest, nt2, ks1, par_array)){\r
// MIFARE check keys. key count up to 85. \r
// \r
//-----------------------------------------------------------------------------\r
-void MifareChkKeys(uint16_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)\r
-{\r
- // params\r
+void MifareChkKeys(uint16_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain) {\r
uint8_t blockNo = arg0 & 0xff;\r
uint8_t keyType = (arg0 >> 8) & 0xff;\r
bool clearTrace = arg1;\r
uint8_t keyCount = arg2;\r
uint64_t ui64Key = 0;\r
\r
- // variables\r
+ bool have_uid = FALSE;\r
+ uint8_t cascade_levels = 0;\r
+ uint32_t timeout = 0;\r
+ \r
int i;\r
byte_t isOK = 0;\r
uint8_t uid[10] = {0x00};\r
struct Crypto1State *pcs;\r
pcs = &mpcs;\r
\r
- // clear debug level\r
+ // save old debuglevel, and tempory turn off dbg printing. speedissues.\r
int OLD_MF_DBGLEVEL = MF_DBGLEVEL; \r
MF_DBGLEVEL = MF_DBG_NONE;\r
\r
clear_trace();\r
\r
set_tracing(TRUE);\r
-\r
+ \r
for (i = 0; i < keyCount; ++i) {\r
- if (mifare_classic_halt(pcs, cuid))\r
- if (MF_DBGLEVEL >= 1) Dbprintf("ChkKeys: Halt error");\r
\r
- if (!iso14443a_select_card(uid, NULL, &cuid, true, 0)) {\r
- if (OLD_MF_DBGLEVEL >= 1) Dbprintf("ChkKeys: Can't select card");\r
- break;\r
- }\r
+ //mifare_classic_halt(pcs, cuid);\r
\r
+ // this part is from Piwi's faster nonce collecting part in Hardnested.\r
+ if (!have_uid) { // need a full select cycle to get the uid first\r
+ iso14a_card_select_t card_info; \r
+ if(!iso14443a_select_card(uid, &card_info, &cuid, true, 0)) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("ChkKeys: Can't select card (ALL)");\r
+ break;\r
+ }\r
+ switch (card_info.uidlen) {\r
+ case 4 : cascade_levels = 1; break;\r
+ case 7 : cascade_levels = 2; break;\r
+ case 10: cascade_levels = 3; break;\r
+ default: break;\r
+ }\r
+ have_uid = TRUE; \r
+ } else { // no need for anticollision. We can directly select the card\r
+ if(!iso14443a_select_card(uid, NULL, NULL, false, cascade_levels)) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("ChkKeys: Can't select card (UID)");\r
+ continue;\r
+ }\r
+ }\r
+ \r
ui64Key = bytes_to_num(datain + i * 6, 6);\r
- if (mifare_classic_auth(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST))\r
- continue;\r
\r
+ if (mifare_classic_auth(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST)) {\r
+\r
+ uint8_t dummy_answer = 0;\r
+ ReaderTransmit(&dummy_answer, 1, NULL);\r
+ timeout = GetCountSspClk() + AUTHENTICATION_TIMEOUT;\r
+ \r
+ // wait for the card to become ready again\r
+ while(GetCountSspClk() < timeout);\r
+ \r
+ continue;\r
+ }\r
isOK = 1;\r
break;\r
}\r
- crypto1_destroy(pcs);\r
\r
LED_B_ON();\r
- cmd_send(CMD_ACK,isOK,0,0,datain + i * 6,6);\r
+ cmd_send(CMD_ACK, isOK, 0, 0, datain + i * 6, 6);\r
+\r
+ // restore debug level\r
+ MF_DBGLEVEL = OLD_MF_DBGLEVEL; \r
+ \r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
LEDsoff();\r
set_tracing(FALSE);\r
- \r
- // restore debug level\r
- MF_DBGLEVEL = OLD_MF_DBGLEVEL; \r
+ crypto1_destroy(pcs);\r
}\r
\r
//-----------------------------------------------------------------------------\r
\r
// wipe tag, fill it with zeros\r
if (workFlags & MAGIC_WIPE){\r
- ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
+ ReaderTransmitBitsPar(wupC1, 7, NULL, NULL);\r
if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wupC1 error");\r
errormsg = MAGIC_WIPE;\r
\r
// write block\r
if (workFlags & MAGIC_WUPC) {\r
- ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
+ ReaderTransmitBitsPar(wupC1, 7, NULL, NULL);\r
if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wupC1 error");\r
errormsg = MAGIC_WUPC;\r
//loop doesn't loop just breaks out if error or done\r
while (true) {\r
if (workFlags & MAGIC_WUPC) {\r
- ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
+ ReaderTransmitBitsPar(wupC1, 7, NULL, NULL);\r
if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wupC1 error");\r
errormsg = MAGIC_WUPC;\r
memcpy(data, receivedAnswer, sizeof(data));\r
\r
// send HALT\r
- if (workFlags & MAGIC_HALT) {\r
+ if (workFlags & MAGIC_HALT)\r
mifare_classic_halt_ex(NULL);\r
- break;\r
- }\r
+\r
isOK = true;\r
break;\r
}\r
uint8_t receivedAnswer[1] = {0x00};\r
uint8_t receivedAnswerPar[1] = {0x00};\r
\r
- ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
+ ReaderTransmitBitsPar(wupC1, 7, NULL, NULL);\r
if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
isOK = false;\r
}\r
projects / proxmark3-svn / blobdiff