// Low frequency commands
//-----------------------------------------------------------------------------
+#include "cmdlf.h"
+
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <limits.h>
#include <stdbool.h>
#include <stdint.h>
-#include "proxmark3.h"
-#include "cmdlf.h"
+#include "comms.h"
#include "lfdemod.h" // for psk2TOpsk1
#include "util.h" // for parsing cli command utils
#include "ui.h" // for show graph controls
#include "graph.h" // for graph data
#include "cmdparser.h" // for getting cli commands included in cmdmain.h
#include "cmdmain.h" // for sending cmds to device
-#include "data.h" // for GetFromBigBuf
#include "cmddata.h" // for `lf search`
#include "cmdlfawid.h" // for awid menu
#include "cmdlfem4x.h" // for em4x menu
int usage_lf_cmdread(void)
{
- PrintAndLog("Usage: lf cmdread d <delay period> z <zero period> o <one period> c <cmdbytes> [H] ");
+ PrintAndLog("Usage: lf cmdread d <delay period> z <zero period> o <one period> c <cmdbytes> ");
PrintAndLog("Options: ");
PrintAndLog(" h This help");
- PrintAndLog(" L Low frequency (125 KHz)");
- PrintAndLog(" H High frequency (134 KHz)");
- PrintAndLog(" d <delay> delay OFF period");
- PrintAndLog(" z <zero> time period ZERO");
- PrintAndLog(" o <one> time period ONE");
+ PrintAndLog(" d <delay> delay OFF period between bits (0 for bitbang mode)");
+ PrintAndLog(" z <zero> time period ZERO (antenna off in bitbang mode)");
+ PrintAndLog(" o <one> time period ONE (antenna on in bitbang mode)");
PrintAndLog(" c <cmd> Command bytes");
PrintAndLog(" ************* All periods in microseconds");
+ PrintAndLog(" ************* Use lf config to configure options.");
PrintAndLog("Examples:");
PrintAndLog(" lf cmdread d 80 z 100 o 200 c 11000");
- PrintAndLog(" lf cmdread d 80 z 100 o 100 c 11000 H");
+ PrintAndLog(" lf cmdread d 80 z 100 o 100 c 11000");
return 0;
}
/* send a command before reading */
int CmdLFCommandRead(const char *Cmd)
{
- static char dummy[3] = {0x20,0x00,0x00};
UsbCommand c = {CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K};
bool errors = false;
//uint8_t divisor = 95; //125khz
{
case 'h':
return usage_lf_cmdread();
- case 'H':
- //divisor = 88;
- dummy[1]='h';
- cmdp++;
- break;
- case 'L':
- cmdp++;
- break;
case 'c':
param_getstr(Cmd, cmdp+1, (char *)&c.d.asBytes, sizeof(c.d.asBytes));
cmdp+=2;
//Validations
if(errors) return usage_lf_cmdread();
- // in case they specified 'H'
- strcpy((char *)&c.d.asBytes + strlen((char *)c.d.asBytes), dummy);
-
clearCommandBuffer();
SendCommand(&c);
+
+ WaitForResponse(CMD_ACK,NULL);
+ getSamples(0, true);
+
+
return 0;
}
{
PrintAndLog("Usage: lf config [H|<divisor>] [b <bps>] [d <decim>] [a 0|1]");
PrintAndLog("Options: ");
- PrintAndLog(" h This help");
- PrintAndLog(" L Low frequency (125 KHz)");
- PrintAndLog(" H High frequency (134 KHz)");
- PrintAndLog(" q <divisor> Manually set divisor. 88-> 134KHz, 95-> 125 Hz");
- PrintAndLog(" b <bps> Sets resolution of bits per sample. Default (max): 8");
- PrintAndLog(" d <decim> Sets decimation. A value of N saves only 1 in N samples. Default: 1");
- PrintAndLog(" a [0|1] Averaging - if set, will average the stored sample value when decimating. Default: 1");
- PrintAndLog(" t <threshold> Sets trigger threshold. 0 means no threshold (range: 0-128)");
+ PrintAndLog(" h This help");
+ PrintAndLog(" L Low frequency (125 KHz)");
+ PrintAndLog(" H High frequency (134 KHz)");
+ PrintAndLog(" q <divisor> Manually set divisor. 88-> 134 KHz, 95-> 125 KHz");
+ PrintAndLog(" b <bps> Sets resolution of bits per sample. Default (max): 8");
+ PrintAndLog(" d <decim> Sets decimation. A value of N saves only 1 in N samples. Default: 1");
+ PrintAndLog(" a [0|1] Averaging - if set, will average the stored sample value when decimating. Default: 1");
+ PrintAndLog(" t <threshold> Sets trigger threshold. 0 means no threshold (range: 0-128)");
+ PrintAndLog(" s <smplstoskip> Sets a number of samples to skip before capture. Default: 0");
PrintAndLog("Examples:");
PrintAndLog(" lf config b 8 L");
- PrintAndLog(" Samples at 125KHz, 8bps.");
+ PrintAndLog(" Samples at 125KHz, 8bps.");
PrintAndLog(" lf config H b 4 d 3");
- PrintAndLog(" Samples at 134KHz, averages three samples into one, stored with ");
- PrintAndLog(" a resolution of 4 bits per sample.");
+ PrintAndLog(" Samples at 134KHz, averages three samples into one, stored with ");
+ PrintAndLog(" a resolution of 4 bits per sample.");
PrintAndLog(" lf read");
- PrintAndLog(" Performs a read (active field)");
+ PrintAndLog(" Performs a read (active field)");
PrintAndLog(" lf snoop");
- PrintAndLog(" Performs a snoop (no active field)");
+ PrintAndLog(" Performs a snoop (no active field)");
return 0;
}
bool errors = false;
int trigger_threshold =-1;//Means no change
uint8_t unsigned_trigg = 0;
+ int samples_to_skip = -1;
uint8_t cmdp =0;
while(param_getchar(Cmd, cmdp) != 0x00)
averaging = param_getchar(Cmd,cmdp+1) == '1';
cmdp+=2;
break;
+ case 's':
+ samples_to_skip = param_get32ex(Cmd,cmdp+1,0,10);
+ cmdp+=2;
+ break;
default:
PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
errors = 1;
if(bps >> 4) bps = 8;
sample_config config = {
- decimation,bps,averaging,divisor,trigger_threshold
+ decimation,bps,averaging,divisor,trigger_threshold,samples_to_skip
};
//Averaging is a flag on high-bit of arg[1]
UsbCommand c = {CMD_SET_LF_SAMPLING_CONFIG};
}
bool lf_read(bool silent, uint32_t samples) {
- if (offline) return false;
+ if (IsOffline()) return false;
UsbCommand c = {CMD_ACQUIRE_RAW_ADC_SAMPLES_125K, {silent,samples,0}};
clearCommandBuffer();
//And ship it to device
int CheckChipType(char cmdp) {
uint32_t wordData = 0;
- if (offline || cmdp == '1') return 0;
+ if (IsOffline() || cmdp == '1') return 0;
save_restoreGB(GRAPH_SAVE);
save_restoreDB(GRAPH_SAVE);
return 0;
}
- if (!offline && (cmdp != '1')) {
+ if (!IsOffline() && (cmdp != '1')) {
lf_read(true, 30000);
} else if (GraphTraceLen < minLength) {
PrintAndLog("Data in Graphbuffer was too small.");
// only run if graphbuffer is just noise as it should be for hitag/cotag
if (graphJustNoise(GraphBuffer, testLen)) {
// only run these tests if we are in online mode
- if (!offline && (cmdp != '1')) {
+ if (!IsOffline() && (cmdp != '1')) {
// test for em4x05 in reader talk first mode.
if (EM4x05Block0Test(&wordData)) {
PrintAndLog("\nValid EM4x05/EM4x69 Chip Found\nUse lf em 4x05readword/dump commands to read\n");
return 1;
}
}
+ PrintAndLog("\nNo Data Found! - maybe not an LF tag?\n");
return 0;
}
projects / proxmark3-svn / blobdiff