// Utility functions used in many places, not specific to any piece of code.
//-----------------------------------------------------------------------------
-#include "proxmark3.h"
#include "util.h"
-#include "string.h"
-#include "apps.h"
-#include "BigBuf.h"
void print_result(char *name, uint8_t *buf, size_t len) {
uint8_t *p = buf;
return newvalue;
}
+/*
+ ref http://www.csm.ornl.gov/~dunigan/crc.html
+ Returns the value v with the bottom b [0,32] bits reflected.
+ Example: reflect(0x3e23L,3) == 0x3e26
+*/
+uint32_t reflect(uint32_t v, int b) {
+ uint32_t t = v;
+ for ( int i = 0; i < b; ++i) {
+ if (t & 1)
+ v |= BITMASK((b-1)-i);
+ else
+ v &= ~BITMASK((b-1)-i);
+ t>>=1;
+ }
+ return v;
+}
+
void num_to_bytes(uint64_t n, size_t len, uint8_t* dest) {
while (len--) {
dest[len] = (uint8_t) n;
data[len - 1] <<= 1;
}
-int32_t le24toh (uint8_t data[3])
-{
+int32_t le24toh (uint8_t data[3]) {
return (data[2] << 16) | (data[1] << 8) | data[0];
}
-void LEDsoff()
-{
+void LEDsoff() {
LED_A_OFF();
LED_B_OFF();
LED_C_OFF();
}
// LEDs: R(C) O(A) G(B) -- R(D) [1, 2, 4 and 8]
-void LED(int led, int ms)
-{
+void LED(int led, int ms) {
if (led & LED_RED)
LED_C_ON();
if (led & LED_ORANGE)
LED_D_OFF();
}
-
// Determine if a button is double clicked, single clicked,
// not clicked, or held down (for ms || 1sec)
// In general, don't use this function unless you expect a
// double click, otherwise it will waste 500ms -- use BUTTON_HELD instead
-int BUTTON_CLICKED(int ms)
-{
+int BUTTON_CLICKED(int ms) {
// Up to 500ms in between clicks to mean a double click
int ticks = (48000 * (ms ? ms : 1000)) >> 10;
}
// Determine if a button is held down
-int BUTTON_HELD(int ms)
-{
+int BUTTON_HELD(int ms) {
// If button is held for one second
int ticks = (48000 * (ms ? ms : 1000)) >> 10;
// attempt at high resolution microsecond timer
// beware: timer counts in 21.3uS increments (1024/48Mhz)
-void SpinDelayUs(int us)
-{
+void SpinDelayUs(int us) {
int ticks = (48*us) >> 10;
// Borrow a PWM unit for my real-time clock
}
}
-void SpinDelay(int ms)
-{
+void SpinDelay(int ms) {
// convert to uS and call microsecond delay function
SpinDelayUs(ms*1000);
}
* verifies the magic properties, then stores a formatted string, prefixed by
* prefix in dst.
*/
-void FormatVersionInformation(char *dst, int len, const char *prefix, void *version_information)
-{
+void FormatVersionInformation(char *dst, int len, const char *prefix, void *version_information) {
struct version_information *v = (struct version_information*)version_information;
dst[0] = 0;
strncat(dst, prefix, len-1);
// ti = GetTickCount() - ti;
// Dbprintf("timer(1s): %d t=%d", ti, GetTickCount());
-void StartTickCount()
-{
+void StartTickCount() {
// This timer is based on the slow clock. The slow clock frequency is between 22kHz and 40kHz.
// We can determine the actual slow clock frequency by looking at the Main Clock Frequency Register.
uint16_t mainf = AT91C_BASE_PMC->PMC_MCFR & 0xffff; // = 16 * main clock frequency (16MHz) / slow clock frequency
// -------------------------------------------------------------------------
// microseconds timer
// -------------------------------------------------------------------------
-void StartCountUS()
-{
+void StartCountUS() {
AT91C_BASE_PMC->PMC_PCER |= (0x1 << 12) | (0x1 << 13) | (0x1 << 14);
// AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC1XC1S_TIOA0;
AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_NONE | AT91C_TCB_TC1XC1S_TIOA0 | AT91C_TCB_TC2XC2S_NONE;
// -------------------------------------------------------------------------
// Timer for iso14443 commands. Uses ssp_clk from FPGA
// -------------------------------------------------------------------------
-void StartCountSspClk()
-{
+void StartCountSspClk() {
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC0) | (1 << AT91C_ID_TC1) | (1 << AT91C_ID_TC2); // Enable Clock to all timers
AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_TIOA1 // XC0 Clock = TIOA1
| AT91C_TCB_TC1XC1S_NONE // XC1 Clock = none
| AT91C_TC_WAVE // Waveform Mode
| AT91C_TC_WAVESEL_UP; // just count
- AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN; // enable TC0
- AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN; // enable TC1
- AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKEN; // enable TC2
+ AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; // enable and reset TC0
+ AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; // enable and reset TC1
+ AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; // enable and reset TC2
// synchronize the counter with the ssp_frame signal.
// Note: FPGA must be in any iso14443 mode, otherwise the frame signal would not be present
// The high word of the counter (TC2) will not reset until the low word (TC0) overflows.
// Therefore need to wait quite some time before we can use the counter.
- while (AT91C_BASE_TC0->TC_CV < 0xFFF0);
+ while (AT91C_BASE_TC2->TC_CV >= 1);
+}
+void ResetSspClk(void) {
+ //enable clock of timer and software trigger
+ AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG;
+ AT91C_BASE_TC1->TC_CCR = AT91C_TC_SWTRG;
+ AT91C_BASE_TC2->TC_CCR = AT91C_TC_SWTRG;
}
uint32_t RAMFUNC GetCountSspClk(){
projects / proxmark3-svn / blobdiff