//-----------------------------------------------------------------------------
// High frequency MIFARE ULTRALIGHT (C) commands
//-----------------------------------------------------------------------------
-#include "loclass/des.h"
+
#include "cmdhfmfu.h"
+
+#include <stdint.h>
+#include <stdio.h>
+#include "comms.h"
+#include "usb_cmd.h"
+#include "cmdmain.h"
+#include "ui.h"
+#include "mbedtls/des.h"
#include "cmdhfmf.h"
-#include "cmdhf14a.h"
#include "mifare.h"
#include "util.h"
#include "protocols.h"
-#include "data.h"
-
-#define MAX_UL_BLOCKS 0x0f
-#define MAX_ULC_BLOCKS 0x2b
-#define MAX_ULEV1a_BLOCKS 0x13
-#define MAX_ULEV1b_BLOCKS 0x28
-#define MAX_NTAG_203 0x29
-#define MAX_NTAG_210 0x13
-#define MAX_NTAG_212 0x28
-#define MAX_NTAG_213 0x2c
-#define MAX_NTAG_215 0x86
-#define MAX_NTAG_216 0xe6
+#include "taginfo.h"
+
+#define MAX_UL_BLOCKS 0x0f
+#define MAX_ULC_BLOCKS 0x2b
+#define MAX_ULEV1a_BLOCKS 0x13
+#define MAX_ULEV1b_BLOCKS 0x28
+#define MAX_NTAG_203 0x29
+#define MAX_NTAG_210 0x13
+#define MAX_NTAG_212 0x28
+#define MAX_NTAG_213 0x2c
+#define MAX_NTAG_215 0x86
+#define MAX_NTAG_216 0xe6
+#define MAX_MY_D_NFC 0xff
+#define MAX_MY_D_MOVE 0x25
+#define MAX_MY_D_MOVE_LEAN 0x0f
#define KEYS_3DES_COUNT 7
uint8_t default_3des_keys[KEYS_3DES_COUNT][16] = {
{ 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF } // 11 22 33
};
-#define KEYS_PWD_COUNT 10
+#define KEYS_PWD_COUNT 6
uint8_t default_pwd_pack[KEYS_PWD_COUNT][4] = {
{0xFF,0xFF,0xFF,0xFF}, // PACK 0x00,0x00 -- factory default
{0xFF,0x90,0x6C,0xB2}, // PACK 0x12,0x9e -- italian bus (sniffed)
{0x46,0x1c,0xA3,0x19}, // PACK 0xE9,0x5A -- italian bus (sniffed)
{0x35,0x1C,0xD0,0x19}, // PACK 0x9A,0x5a -- italian bus (sniffed)
-
- {0x05,0x22,0xE6,0xB4}, // PACK 0x80,0x80 -- Amiiboo (sniffed) pikachu-b UID:
- {0x7E,0x22,0xE6,0xB4}, // PACK 0x80,0x80 -- AMiiboo (sniffed)
- {0x02,0xE1,0xEE,0x36}, // PACK 0x80,0x80 -- AMiiboo (sniffed) sonic UID: 04d257 7ae33e8027
- {0x32,0x0C,0x16,0x17}, // PACK 0x80,0x80 -- AMiiboo (sniffed)
};
-#define MAX_UL_TYPES 16
-uint16_t UL_TYPES_ARRAY[MAX_UL_TYPES] = {UNKNOWN, UL, UL_C, UL_EV1_48, UL_EV1_128, NTAG, NTAG_203,
- NTAG_210, NTAG_212, NTAG_213, NTAG_215, NTAG_216, MY_D, MY_D_NFC, MY_D_MOVE, MY_D_MOVE_NFC};
+#define MAX_UL_TYPES 18
+uint32_t UL_TYPES_ARRAY[MAX_UL_TYPES] = {UNKNOWN, UL, UL_C, UL_EV1_48, UL_EV1_128, NTAG, NTAG_203,
+ NTAG_210, NTAG_212, NTAG_213, NTAG_215, NTAG_216, MY_D, MY_D_NFC, MY_D_MOVE, MY_D_MOVE_NFC, MY_D_MOVE_LEAN, FUDAN_UL};
uint8_t UL_MEMORY_ARRAY[MAX_UL_TYPES] = {MAX_UL_BLOCKS, MAX_UL_BLOCKS, MAX_ULC_BLOCKS, MAX_ULEV1a_BLOCKS,
MAX_ULEV1b_BLOCKS, MAX_NTAG_203, MAX_NTAG_203, MAX_NTAG_210, MAX_NTAG_212, MAX_NTAG_213,
- MAX_NTAG_215, MAX_NTAG_216, MAX_UL_BLOCKS, MAX_UL_BLOCKS, MAX_UL_BLOCKS, MAX_UL_BLOCKS};
+ MAX_NTAG_215, MAX_NTAG_216, MAX_UL_BLOCKS, MAX_MY_D_NFC, MAX_MY_D_MOVE, MAX_MY_D_MOVE, MAX_MY_D_MOVE_LEAN, MAX_UL_BLOCKS};
static int CmdHelp(const char *Cmd);
+// get version nxp product type
char *getProductTypeStr( uint8_t id){
static char buf[20];
}
static void ul_switch_on_field(void) {
- UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_CONNECT | ISO14A_NO_DISCONNECT, 0, 0}};
- SendCommand(&c);
-}
-
-void ul_switch_off_field(void) {
- UsbCommand c = {CMD_READER_ISO_14443a, {0, 0, 0}};
+ UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_CONNECT | ISO14A_NO_DISCONNECT | ISO14A_NO_RATS, 0, 0}};
+ clearCommandBuffer();
SendCommand(&c);
}
static int ul_send_cmd_raw( uint8_t *cmd, uint8_t cmdlen, uint8_t *response, uint16_t responseLength ) {
UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_NO_DISCONNECT | ISO14A_APPEND_CRC, cmdlen, 0}};
memcpy(c.d.asBytes, cmd, cmdlen);
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
c.arg[0] |= ISO14A_APPEND_CRC;
memcpy(c.d.asBytes, cmd, cmdlen);
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
ans = WaitForResponseTimeout(CMD_ACK, &resp, 1500);
if (!ans || resp.arg[0] < 1) {
PrintAndLog("iso14443a card select failed");
- ul_switch_off_field();
+ DropField();
return 0;
}
UsbCommand c = {CMD_MIFAREUC_AUTH, {switch_off_field}};
memcpy(c.d.asBytes, key, 16);
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
if ( !WaitForResponseTimeout(CMD_ACK, &resp, 1500) ) return 0;
if (hasAuthKey) {
if (ulev1_requestAuthentication(authenticationkey, pack, packSize) < 1) {
- ul_switch_off_field();
+ DropField();
PrintAndLog("Error: Authentication Failed UL-EV1/NTAG");
return 0;
}
return len;
}
+
+// Fudan check checks for which error is given for a command with incorrect crc
+// NXP UL chip responds with 01, fudan 00.
+// other possible checks:
+// send a0 + crc
+// UL responds with 00, fudan doesn't respond
+// or
+// send a200 + crc
+// UL doesn't respond, fudan responds with 00
+// or
+// send 300000 + crc (read with extra byte(s))
+// UL responds with read of page 0, fudan doesn't respond.
+//
+// make sure field is off before calling this function
+static int ul_fudan_check( void ){
+ iso14a_card_select_t card;
+ if ( !ul_select(&card) )
+ return UL_ERROR;
+
+ UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_NO_DISCONNECT, 4, 0}};
+
+ uint8_t cmd[4] = {0x30,0x00,0x02,0xa7}; //wrong crc on purpose should be 0xa8
+ memcpy(c.d.asBytes, cmd, 4);
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return UL_ERROR;
+ if (resp.arg[0] != 1) return UL_ERROR;
+
+ return (!resp.d.asBytes[0]) ? FUDAN_UL : UL; //if response == 0x00 then Fudan, else Genuine NXP
+}
+
static int ul_print_default( uint8_t *data){
uint8_t uid[7];
uid[6] = data[7];
PrintAndLog(" UID : %s ", sprint_hex(uid, 7));
- PrintAndLog(" UID[0] : %02X, Manufacturer: %s", uid[0], getTagInfo(uid[0]) );
- if ( uid[0] == 0x05 ) {
+ PrintAndLog(" UID[0] : %02X, %s", uid[0], getManufacturerName(uid[0]));
+ if ( uid[0] == 0x05 && ((uid[1] & 0xf0) >> 4) == 2 ) { // is infineon and 66RxxP
uint8_t chip = (data[8] & 0xC7); // 11000111 mask, bit 3,4,5 RFU
switch (chip){
- case 0xc2: PrintAndLog(" IC type : SLE 66R04P"); break;
- case 0xc4: PrintAndLog(" IC type : SLE 66R16P"); break;
- case 0xc6: PrintAndLog(" IC type : SLE 66R32P"); break;
+ case 0xc2: PrintAndLog(" IC type : SLE 66R04P 770 Bytes"); break; //77 pages
+ case 0xc4: PrintAndLog(" IC type : SLE 66R16P 2560 Bytes"); break; //256 pages
+ case 0xc6: PrintAndLog(" IC type : SLE 66R32P 5120 Bytes"); break; //512 pages /2 sectors
}
}
// CT (cascade tag byte) 0x88 xor SN0 xor SN1 xor SN2
else if ( tagtype & NTAG_I2C_2K )
PrintAndLog("%sTYPE : NTAG I%sC 1904bytes (NT3H1201FHK)", spacer, "\xFD");
else if ( tagtype & MY_D )
- PrintAndLog("%sTYPE : INFINEON my-d\x99", spacer);
+ PrintAndLog("%sTYPE : INFINEON my-d\x99 (SLE 66RxxS)", spacer);
else if ( tagtype & MY_D_NFC )
- PrintAndLog("%sTYPE : INFINEON my-d\x99 NFC", spacer);
+ PrintAndLog("%sTYPE : INFINEON my-d\x99 NFC (SLE 66RxxP)", spacer);
else if ( tagtype & MY_D_MOVE )
- PrintAndLog("%sTYPE : INFINEON my-d\x99 move", spacer);
+ PrintAndLog("%sTYPE : INFINEON my-d\x99 move (SLE 66R01P)", spacer);
else if ( tagtype & MY_D_MOVE_NFC )
- PrintAndLog("%sTYPE : INFINEON my-d\x99 move NFC", spacer);
+ PrintAndLog("%sTYPE : INFINEON my-d\x99 move NFC (SLE 66R01P)", spacer);
+ else if ( tagtype & MY_D_MOVE_LEAN )
+ PrintAndLog("%sTYPE : INFINEON my-d\x99 move lean (SLE 66R01L)", spacer);
+ else if ( tagtype & FUDAN_UL )
+ PrintAndLog("%sTYPE : FUDAN Ultralight Compatible (or other compatible) %s", spacer, (tagtype & MAGIC) ? "<magic>" : "" );
else
PrintAndLog("%sTYPE : Unknown %06x", spacer, tagtype);
return 0;
return 0;
}
-static int ulev1_print_configuration( uint8_t *data){
+static int ulev1_print_configuration( uint8_t *data, uint8_t startPage){
PrintAndLog("\n--- Tag Configuration");
bool prot = (data[4] & 0x80);
uint8_t vctid = data[5];
- PrintAndLog(" cfg0 [16/0x10] : %s", sprint_hex(data, 4));
+ PrintAndLog(" cfg0 [%u/0x%02X] : %s", startPage, startPage, sprint_hex(data, 4));
if ( data[3] < 0xff )
PrintAndLog(" - page %d and above need authentication",data[3]);
else
PrintAndLog(" - pages don't need authentication");
PrintAndLog(" - strong modulation mode %s", (strg_mod_en) ? "enabled":"disabled");
- PrintAndLog(" cfg1 [17/0x11] : %s", sprint_hex(data+4, 4) );
+ PrintAndLog(" cfg1 [%u/0x%02X] : %s", startPage + 1, startPage + 1, sprint_hex(data+4, 4) );
if ( authlim == 0)
PrintAndLog(" - Unlimited password attempts");
else
PrintAndLog(" - user configuration %s", cfglck ? "permanently locked":"writeable");
PrintAndLog(" - %s access is protected with password", prot ? "read and write":"write");
PrintAndLog(" - %02X, Virtual Card Type Identifier is %s default", vctid, (vctid==0x05)? "":"not");
- PrintAndLog(" PWD [18/0x12] : %s", sprint_hex(data+8, 4));
- PrintAndLog(" PACK [19/0x13] : %s", sprint_hex(data+12, 4));
+ PrintAndLog(" PWD [%u/0x%02X] : %s- (cannot be read)", startPage + 2, startPage + 2, sprint_hex(data+8, 4));
+ PrintAndLog(" PACK [%u/0x%02X] : %s - (cannot be read)", startPage + 3, startPage + 3, sprint_hex(data+12, 2));
+ PrintAndLog(" RFU [%u/0x%02X] : %s- (cannot be read)", startPage + 3, startPage + 3, sprint_hex(data+12, 2));
return 0;
}
static int ulev1_print_version(uint8_t *data){
PrintAndLog("\n--- Tag Version");
PrintAndLog(" Raw bytes : %s",sprint_hex(data, 8) );
- PrintAndLog(" Vendor ID : %02X, %s", data[1], getTagInfo(data[1]));
+ PrintAndLog(" Vendor ID : %02X, %s", data[1], getManufacturerName(data[1]));
PrintAndLog(" Product type : %s", getProductTypeStr(data[2]));
PrintAndLog(" Product subtype : %02X, %s", data[3], (data[3]==1) ?"17 pF":"50pF");
PrintAndLog(" Major version : %02X", data[4]);
} else {
returnValue = UL;
}
- ul_switch_off_field();
+ DropField();
return returnValue;
}
*/
if ( !ul_select(&card) )
return UL_ERROR;
int status = ul_comp_write(0, NULL, 0);
- ul_switch_off_field();
+ DropField();
if ( status == 0 )
return MAGIC;
return 0;
// Ultralight - ATQA / SAK
if ( card.atqa[1] != 0x00 || card.atqa[0] != 0x44 || card.sak != 0x00 ) {
PrintAndLog("Tag is not Ultralight | NTAG | MY-D [ATQA: %02X %02X SAK: %02X]\n", card.atqa[1], card.atqa[0], card.sak);
- ul_switch_off_field();
+ DropField();
return UL_ERROR;
}
if ( card.uid[0] != 0x05) {
len = ulev1_getVersion(version, sizeof(version));
- ul_switch_off_field();
+ DropField();
switch (len) {
case 0x0A: {
// do UL_C check first...
uint8_t nonce[11] = {0x00};
status = ulc_requestAuthentication(nonce, sizeof(nonce));
- ul_switch_off_field();
+ DropField();
if (status > 1) {
tagtype = UL_C;
} else {
tagtype = UNKNOWN;
}
}
- ul_switch_off_field();
+ DropField();
}
}
+ if (tagtype & UL) {
+ tagtype = ul_fudan_check();
+ DropField();
+ }
} else {
+ DropField();
// Infinition MY-D tests Exam high nibble
uint8_t nib = (card.uid[1] & 0xf0) >> 4;
switch ( nib ){
- case 1: tagtype = MY_D; break;
- case 2: tagtype = (MY_D | MY_D_NFC); break; //notice: we can not currently distinguish between these two
- case 3: tagtype = (MY_D_MOVE | MY_D_MOVE_NFC); break; //notice: we can not currently distinguish between these two
+ // case 0: tagtype = SLE66R35E7; break; //or SLE 66R35E7 - mifare compat... should have different sak/atqa for mf 1k
+ case 1: tagtype = MY_D; break; //or SLE 66RxxS ... up to 512 pages of 8 user bytes...
+ case 2: tagtype = (MY_D_NFC); break; //or SLE 66RxxP ... up to 512 pages of 8 user bytes... (or in nfc mode FF pages of 4 bytes)
+ case 3: tagtype = (MY_D_MOVE | MY_D_MOVE_NFC); break; //or SLE 66R01P // 38 pages of 4 bytes //notice: we can not currently distinguish between these two
+ case 7: tagtype = MY_D_MOVE_LEAN; break; //or SLE 66R01L // 16 pages of 4 bytes
}
}
return usage_hf_mfu_info();
case 'k':
case 'K':
- dataLen = param_getstr(Cmd, cmdp+1, tempStr);
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr, sizeof(tempStr));
if (dataLen == 32 || dataLen == 8) { //ul-c or ev1/ntag key length
errors = param_gethex(tempStr, 0, authenticationkey, dataLen);
dataLen /= 2; // handled as bytes from now on
// read pages 0,1,2,3 (should read 4pages)
status = ul_read(0, data, sizeof(data));
if ( status == -1 ) {
- ul_switch_off_field();
+ DropField();
PrintAndLog("Error: tag didn't answer to READ");
return status;
} else if (status == 16) {
status = ul_read(0x28, ulc_conf, sizeof(ulc_conf));
if ( status == -1 ){
PrintAndLog("Error: tag didn't answer to READ UL-C");
- ul_switch_off_field();
+ DropField();
return status;
}
if (status == 16) ulc_print_configuration(ulc_conf);
uint8_t ulc_deskey[16] = {0x00};
status = ul_read(0x2C, ulc_deskey, sizeof(ulc_deskey));
if ( status == -1 ) {
- ul_switch_off_field();
+ DropField();
PrintAndLog("Error: tag didn't answer to READ magic");
return status;
}
if (status == 16) ulc_print_3deskey(ulc_deskey);
} else {
- ul_switch_off_field();
+ DropField();
// if we called info with key, just return
if ( hasAuthKey ) return 1;
status = ulev1_readSignature( ulev1_signature, sizeof(ulev1_signature));
if ( status == -1 ) {
PrintAndLog("Error: tag didn't answer to READ SIGNATURE");
- ul_switch_off_field();
+ DropField();
return status;
}
if (status == 32) ulev1_print_signature( ulev1_signature, sizeof(ulev1_signature));
status = ulev1_getVersion(version, sizeof(version));
if ( status == -1 ) {
PrintAndLog("Error: tag didn't answer to GETVERSION");
- ul_switch_off_field();
+ DropField();
return status;
} else if (status == 10) {
ulev1_print_version(version);
status = ul_read(startconfigblock, ulev1_conf, sizeof(ulev1_conf));
if ( status == -1 ) {
PrintAndLog("Error: tag didn't answer to READ EV1");
- ul_switch_off_field();
+ DropField();
return status;
} else if (status == 16) {
// save AUTHENTICATION LIMITS for later:
authlim = (ulev1_conf[4] & 0x07);
- ulev1_print_configuration(ulev1_conf);
+ ulev1_print_configuration(ulev1_conf, startconfigblock);
}
}
}
}
- ul_switch_off_field();
+ DropField();
if (locked) PrintAndLog("\nTag appears to be locked, try using the key to get more info");
PrintAndLog("");
return 1;
}
//
-// Mifare Ultralight Write Single Block
+// Write Single Block
//
int CmdHF14AMfUWrBl(const char *Cmd){
- uint8_t blockNo = -1;
- bool chinese_card = FALSE;
- uint8_t bldata[16] = {0x00};
- UsbCommand resp;
- char cmdp = param_getchar(Cmd, 0);
- if (strlen(Cmd) < 3 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu wrbl <block number> <block data (8 hex symbols)> [w]");
- PrintAndLog(" [block number]");
- PrintAndLog(" [block data] - (8 hex symbols)");
- PrintAndLog(" [w] - Chinese magic ultralight tag");
- PrintAndLog("");
- PrintAndLog(" sample: hf mfu wrbl 0 01020304");
- PrintAndLog("");
- return 0;
- }
-
- blockNo = param_get8(Cmd, 0);
+ int blockNo = -1;
+ bool errors = false;
+ bool hasAuthKey = false;
+ bool hasPwdKey = false;
+ bool swapEndian = false;
- if (blockNo > MAX_UL_BLOCKS){
- PrintAndLog("Error: Maximum number of blocks is 15 for Ultralight Cards!");
- return 1;
+ uint8_t cmdp = 0;
+ uint8_t keylen = 0;
+ uint8_t blockdata[20] = {0x00};
+ uint8_t data[16] = {0x00};
+ uint8_t authenticationkey[16] = {0x00};
+ uint8_t *authKeyPtr = authenticationkey;
+
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_mfu_wrbl();
+ case 'k':
+ case 'K':
+ // EV1/NTAG size key
+ keylen = param_gethex(Cmd, cmdp+1, data, 8);
+ if ( !keylen ) {
+ memcpy(authenticationkey, data, 4);
+ cmdp += 2;
+ hasPwdKey = true;
+ break;
+ }
+ // UL-C size key
+ keylen = param_gethex(Cmd, cmdp+1, data, 32);
+ if (!keylen){
+ memcpy(authenticationkey, data, 16);
+ cmdp += 2;
+ hasAuthKey = true;
+ break;
+ }
+ PrintAndLog("\nERROR: Key is incorrect length\n");
+ errors = true;
+ break;
+ case 'b':
+ case 'B':
+ blockNo = param_get8(Cmd, cmdp+1);
+ if (blockNo < 0) {
+ PrintAndLog("Wrong block number");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'l':
+ case 'L':
+ swapEndian = true;
+ cmdp++;
+ break;
+ case 'd':
+ case 'D':
+ if ( param_gethex(Cmd, cmdp+1, blockdata, 8) ) {
+ PrintAndLog("Block data must include 8 HEX symbols");
+ errors = true;
+ break;
+ }
+ cmdp += 2;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ //Validations
+ if(errors) return usage_hf_mfu_wrbl();
}
-
- if (param_gethex(Cmd, 1, bldata, 8)) {
- PrintAndLog("Block data must include 8 HEX symbols");
- return 1;
+
+ if ( blockNo == -1 ) return usage_hf_mfu_wrbl();
+ // starting with getting tagtype
+ TagTypeUL_t tagtype = GetHF14AMfU_Type();
+ if (tagtype == UL_ERROR) return -1;
+
+ uint8_t maxblockno = 0;
+ for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++){
+ if (tagtype & UL_TYPES_ARRAY[idx])
+ maxblockno = UL_MEMORY_ARRAY[idx];
}
-
- if (strchr(Cmd,'w') != 0 || strchr(Cmd,'W') != 0 ) {
- chinese_card = TRUE;
+ if (blockNo > maxblockno){
+ PrintAndLog("block number too large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
+ return usage_hf_mfu_wrbl();
}
-
- if ( blockNo <= 3) {
- if (!chinese_card){
- PrintAndLog("Access Denied");
- } else {
- PrintAndLog("--specialblock no:%02x", blockNo);
- PrintAndLog("--data: %s", sprint_hex(bldata, 4));
- UsbCommand d = {CMD_MIFAREU_WRITEBL, {blockNo}};
- memcpy(d.d.asBytes,bldata, 4);
- SendCommand(&d);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("isOk:%02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- }
- }
+
+ // Swap endianness
+ if (swapEndian && hasAuthKey) authKeyPtr = SwapEndian64(authenticationkey, 16, 8);
+ if (swapEndian && hasPwdKey) authKeyPtr = SwapEndian64(authenticationkey, 4, 4);
+
+ if ( blockNo <= 3)
+ PrintAndLog("Special Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(blockdata, 4));
+ else
+ PrintAndLog("Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(blockdata, 4));
+
+ //Send write Block
+ UsbCommand c = {CMD_MIFAREU_WRITEBL, {blockNo}};
+ memcpy(c.d.asBytes,blockdata,4);
+
+ if ( hasAuthKey ) {
+ c.arg[1] = 1;
+ memcpy(c.d.asBytes+4,authKeyPtr,16);
+ }
+ else if ( hasPwdKey ) {
+ c.arg[1] = 2;
+ memcpy(c.d.asBytes+4,authKeyPtr,4);
+ }
+
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
+ uint8_t isOK = resp.arg[0] & 0xff;
+ PrintAndLog("isOk:%02x", isOK);
} else {
- PrintAndLog("--block no:%02x", blockNo);
- PrintAndLog("--data: %s", sprint_hex(bldata, 4));
- UsbCommand e = {CMD_MIFAREU_WRITEBL, {blockNo}};
- memcpy(e.d.asBytes,bldata, 4);
- SendCommand(&e);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("isOk:%02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- }
+ PrintAndLog("Command execute timeout");
}
+
return 0;
}
-
//
-// Mifare Ultralight Read Single Block
+// Read Single Block
//
int CmdHF14AMfURdBl(const char *Cmd){
- UsbCommand resp;
- uint8_t blockNo = -1;
- char cmdp = param_getchar(Cmd, 0);
-
- if (strlen(Cmd) < 1 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu rdbl <block number>");
- PrintAndLog(" sample: hfu mfu rdbl 0");
- return 0;
+ int blockNo = -1;
+ bool errors = false;
+ bool hasAuthKey = false;
+ bool hasPwdKey = false;
+ bool swapEndian = false;
+ uint8_t cmdp = 0;
+ uint8_t keylen = 0;
+ uint8_t data[16] = {0x00};
+ uint8_t authenticationkey[16] = {0x00};
+ uint8_t *authKeyPtr = authenticationkey;
+
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_mfu_rdbl();
+ case 'k':
+ case 'K':
+ // EV1/NTAG size key
+ keylen = param_gethex(Cmd, cmdp+1, data, 8);
+ if ( !keylen ) {
+ memcpy(authenticationkey, data, 4);
+ cmdp += 2;
+ hasPwdKey = true;
+ break;
+ }
+ // UL-C size key
+ keylen = param_gethex(Cmd, cmdp+1, data, 32);
+ if (!keylen){
+ memcpy(authenticationkey, data, 16);
+ cmdp += 2;
+ hasAuthKey = true;
+ break;
+ }
+ PrintAndLog("\nERROR: Key is incorrect length\n");
+ errors = true;
+ break;
+ case 'b':
+ case 'B':
+ blockNo = param_get8(Cmd, cmdp+1);
+ if (blockNo < 0) {
+ PrintAndLog("Wrong block number");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'l':
+ case 'L':
+ swapEndian = true;
+ cmdp++;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ //Validations
+ if(errors) return usage_hf_mfu_rdbl();
}
- blockNo = param_get8(Cmd, 0);
+ if ( blockNo == -1 ) return usage_hf_mfu_rdbl();
+ // start with getting tagtype
+ TagTypeUL_t tagtype = GetHF14AMfU_Type();
+ if (tagtype == UL_ERROR) return -1;
- if (blockNo > MAX_UL_BLOCKS){
- PrintAndLog("Error: Maximum number of blocks is 15 for Ultralight");
- return 1;
+ uint8_t maxblockno = 0;
+ for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++){
+ if (tagtype & UL_TYPES_ARRAY[idx])
+ maxblockno = UL_MEMORY_ARRAY[idx];
+ }
+ if (blockNo > maxblockno){
+ PrintAndLog("block number to large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
+ return usage_hf_mfu_rdbl();
}
- UsbCommand c = {CMD_MIFAREU_READBL, {blockNo}};
- SendCommand(&c);
+ // Swap endianness
+ if (swapEndian && hasAuthKey) authKeyPtr = SwapEndian64(authenticationkey, 16, 8);
+ if (swapEndian && hasPwdKey) authKeyPtr = SwapEndian64(authenticationkey, 4, 4);
+ //Read Block
+ UsbCommand c = {CMD_MIFAREU_READBL, {blockNo}};
+ if ( hasAuthKey ){
+ c.arg[1] = 1;
+ memcpy(c.d.asBytes,authKeyPtr,16);
+ }
+ else if ( hasPwdKey ) {
+ c.arg[1] = 2;
+ memcpy(c.d.asBytes,authKeyPtr,4);
+ }
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
uint8_t isOK = resp.arg[0] & 0xff;
if (isOK) {
uint8_t *data = resp.d.asBytes;
- PrintAndLog("Block: %0d (0x%02X) [ %s]", (int)blockNo, blockNo, sprint_hex(data, 4));
+ PrintAndLog("\n Block# | Data | Ascii");
+ PrintAndLog("---------+-------------+------");
+ PrintAndLog(" %02d/0x%02X | %s| %.4s\n", blockNo, blockNo, sprint_hex(data, 4), data);
}
else {
PrintAndLog("Failed reading block: (%02x)", isOK);
} else {
PrintAndLog("Command execute time-out");
}
-
return 0;
}
return 0;
}
+int usage_hf_mfu_rdbl(void) {
+ PrintAndLog("Read a block and print. It autodetects card type.\n");
+ PrintAndLog("Usage: hf mfu rdbl b <block number> k <key> l\n");
+ PrintAndLog(" Options:");
+ PrintAndLog(" b <no> : block to read");
+ PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
+ PrintAndLog(" l : (optional) swap entered key's endianness");
+ PrintAndLog("");
+ PrintAndLog(" sample : hf mfu rdbl b 0");
+ PrintAndLog(" : hf mfu rdbl b 0 k 00112233445566778899AABBCCDDEEFF");
+ PrintAndLog(" : hf mfu rdbl b 0 k AABBCCDDD\n");
+ return 0;
+}
+
+int usage_hf_mfu_wrbl(void) {
+ PrintAndLog("Write a block. It autodetects card type.\n");
+ PrintAndLog("Usage: hf mfu wrbl b <block number> d <data> k <key> l\n");
+ PrintAndLog(" Options:");
+ PrintAndLog(" b <no> : block to write");
+ PrintAndLog(" d <data> : block data - (8 hex symbols)");
+ PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
+ PrintAndLog(" l : (optional) swap entered key's endianness");
+ PrintAndLog("");
+ PrintAndLog(" sample : hf mfu wrbl b 0 d 01234567");
+ PrintAndLog(" : hf mfu wrbl b 0 d 01234567 k AABBCCDDD\n");
+ return 0;
+}
+
//
// Mifare Ultralight / Ultralight-C / Ultralight-EV1
// Read and Dump Card Contents, using auto detection of tag size.
bool manualPages = false;
uint8_t startPage = 0;
char tempStr[50];
+ unsigned char cleanASCII[4];
while(param_getchar(Cmd, cmdp) != 0x00)
{
return usage_hf_mfu_dump();
case 'k':
case 'K':
- dataLen = param_getstr(Cmd, cmdp+1, tempStr);
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr, sizeof(tempStr));
if (dataLen == 32 || dataLen == 8) { //ul-c or ev1/ntag key length
errors = param_gethex(tempStr, 0, authenticationkey, dataLen);
dataLen /= 2;
break;
case 'n':
case 'N':
- fileNlen = param_getstr(Cmd, cmdp+1, filename);
+ fileNlen = param_getstr(Cmd, cmdp+1, filename, sizeof(filename));
if (!fileNlen) errors = true;
if (fileNlen > FILE_PATH_SIZE-5) fileNlen = FILE_PATH_SIZE-5;
cmdp += 2;
TagTypeUL_t tagtype = GetHF14AMfU_Type();
if (tagtype == UL_ERROR) return -1;
- if (!manualPages)
+ if (!manualPages) //get number of pages to read
for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++)
if (tagtype & UL_TYPES_ARRAY[idx])
- Pages = UL_MEMORY_ARRAY[idx]+1;
+ Pages = UL_MEMORY_ARRAY[idx]+1; //add one as maxblks starts at 0
ul_print_type(tagtype, 0);
PrintAndLog("Reading tag memory...");
memcpy(c.d.asBytes, authKeyPtr, dataLen);
}
+
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
if (!WaitForResponseTimeout(CMD_ACK, &resp,1500)) {
return 1;
}
+ uint32_t startindex = resp.arg[2];
uint32_t bufferSize = resp.arg[1];
if (bufferSize > sizeof(data)) {
PrintAndLog("Data exceeded Buffer size!");
bufferSize = sizeof(data);
}
- GetFromBigBuf(data, bufferSize, 0);
- WaitForResponse(CMD_ACK,NULL);
+ GetFromBigBuf(data, bufferSize, startindex, NULL, -1, false);
Pages = bufferSize/4;
// Load lock bytes.
// add keys to block dump
if (hasAuthKey) {
- if (!swapEndian) {
+ if (!swapEndian){
authKeyPtr = SwapEndian64(authenticationkey, dataLen, (dataLen == 16) ? 8 : 4);
- memcpy(data + Pages*4, authKeyPtr, dataLen);
} else {
- memcpy(data + Pages*4, authenticationkey, dataLen);
+ authKeyPtr = authenticationkey;
+ }
+
+ if (tagtype & UL_C){ //add 4 pages
+ memcpy(data + Pages*4, authKeyPtr, dataLen);
+ Pages += dataLen/4;
+ } else { // 2nd page from end
+ memcpy(data + (Pages*4) - 8, authenticationkey, dataLen);
}
- Pages += dataLen/4; //not sure output is in correct location for all tag types.
}
+ PrintAndLog("\n Block# | Data |lck| Ascii");
+ PrintAndLog("---------+-------------+---+------");
for (i = 0; i < Pages; ++i) {
if ( i < 3 ) {
- PrintAndLog("Block %02x:%s ", i,sprint_hex(data + i * 4, 4));
+ PrintAndLog("%3d/0x%02X | %s| | ", i+startPage, i+startPage, sprint_hex(data + i * 4, 4));
continue;
}
switch(i){
case 43: tmplockbit = bit2[9]; break; //auth1
default: break;
}
- PrintAndLog("Block %02x:%s [%d] {%.4s}", i, sprint_hex(data + i * 4, 4), tmplockbit, data+i*4);
+
+ // convert unprintable characters and line breaks to dots
+ memcpy(cleanASCII, data+i*4, 4);
+ clean_ascii(cleanASCII, 4);
+
+ PrintAndLog("%3d/0x%02X | %s| %d | %.4s", i+startPage, i+startPage, sprint_hex(data + i * 4, 4), tmplockbit, cleanASCII);
}
+ PrintAndLog("---------------------------------");
// user supplied filename?
if (fileNlen < 1) {
//Change key to user defined one
if (cmdp == 'k' || cmdp == 'K'){
keyNo = param_get8(Cmd, 1);
- if(keyNo > KEYS_3DES_COUNT)
+ if(keyNo > KEYS_3DES_COUNT-1)
errors = true;
}
}
**/
-//
-// Ultralight C Read Single Block
-//
-int CmdHF14AMfUCRdBl(const char *Cmd)
-{
- UsbCommand resp;
- bool hasPwd = FALSE;
- uint8_t blockNo = -1;
- uint8_t key[16];
- char cmdp = param_getchar(Cmd, 0);
-
- if (strlen(Cmd) < 1 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu crdbl <block number> <key>");
- PrintAndLog("");
- PrintAndLog("sample: hf mfu crdbl 0");
- PrintAndLog(" hf mfu crdbl 0 00112233445566778899AABBCCDDEEFF");
- return 0;
- }
-
- blockNo = param_get8(Cmd, 0);
- if (blockNo < 0) {
- PrintAndLog("Wrong block number");
- return 1;
- }
-
- if (blockNo > MAX_ULC_BLOCKS ){
- PrintAndLog("Error: Maximum number of blocks is 47 for Ultralight-C");
- return 1;
- }
-
- // key
- if ( strlen(Cmd) > 3){
- if (param_gethex(Cmd, 1, key, 32)) {
- PrintAndLog("Key must include %d HEX symbols", 32);
- return 1;
- } else {
- hasPwd = TRUE;
- }
- }
-
- //Read Block
- UsbCommand c = {CMD_MIFAREU_READBL, {blockNo}};
- if ( hasPwd ) {
- c.arg[1] = 1;
- memcpy(c.d.asBytes,key,16);
- }
- SendCommand(&c);
-
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- if (isOK) {
- uint8_t *data = resp.d.asBytes;
- PrintAndLog("Block: %0d (0x%02X) [ %s]", (int)blockNo, blockNo, sprint_hex(data, 4));
- }
- else {
- PrintAndLog("Failed reading block: (%02x)", isOK);
- }
- } else {
- PrintAndLog("Command execute time-out");
- }
- return 0;
-}
-
-//
-// Mifare Ultralight C Write Single Block
-//
-int CmdHF14AMfUCWrBl(const char *Cmd){
-
- uint8_t blockNo = -1;
- bool chinese_card = FALSE;
- uint8_t bldata[16] = {0x00};
- UsbCommand resp;
-
- char cmdp = param_getchar(Cmd, 0);
-
- if (strlen(Cmd) < 3 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu cwrbl <block number> <block data (8 hex symbols)> [w]");
- PrintAndLog(" [block number]");
- PrintAndLog(" [block data] - (8 hex symbols)");
- PrintAndLog(" [w] - Chinese magic ultralight tag");
- PrintAndLog("");
- PrintAndLog(" sample: hf mfu cwrbl 0 01020304");
- PrintAndLog("");
- return 0;
- }
-
- blockNo = param_get8(Cmd, 0);
- if (blockNo > MAX_ULC_BLOCKS ){
- PrintAndLog("Error: Maximum number of blocks is 47 for Ultralight-C Cards!");
- return 1;
- }
-
- if (param_gethex(Cmd, 1, bldata, 8)) {
- PrintAndLog("Block data must include 8 HEX symbols");
- return 1;
- }
-
- if (strchr(Cmd,'w') != 0 || strchr(Cmd,'W') != 0 ) {
- chinese_card = TRUE;
- }
-
- if ( blockNo <= 3 ) {
- if (!chinese_card){
- PrintAndLog("Access Denied");
- return 1;
- } else {
- PrintAndLog("--Special block no: 0x%02x", blockNo);
- PrintAndLog("--Data: %s", sprint_hex(bldata, 4));
- UsbCommand d = {CMD_MIFAREU_WRITEBL, {blockNo}};
- memcpy(d.d.asBytes,bldata, 4);
- SendCommand(&d);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("isOk:%02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- return 1;
- }
- }
- } else {
- PrintAndLog("--Block no : 0x%02x", blockNo);
- PrintAndLog("--Data: %s", sprint_hex(bldata, 4));
- UsbCommand e = {CMD_MIFAREU_WRITEBL, {blockNo}};
- memcpy(e.d.asBytes,bldata, 4);
- SendCommand(&e);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("isOk : %02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- return 1;
- }
- }
- return 0;
-}
-
//
// Mifare Ultralight C - Set password
//
UsbCommand c = {CMD_MIFAREUC_SETPWD};
memcpy( c.d.asBytes, pwd, 16);
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
// read block2.
c.cmd = CMD_MIFAREU_READBL;
c.arg[0] = 2;
+ clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
PrintAndLog("Command execute timeout");
c.d.asBytes[1] = uid[1];
c.d.asBytes[2] = uid[2];
c.d.asBytes[3] = 0x88 ^ uid[0] ^ uid[1] ^ uid[2];
+ clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
PrintAndLog("Command execute timeout");
c.d.asBytes[1] = uid[4];
c.d.asBytes[2] = uid[5];
c.d.asBytes[3] = uid[6];
+ clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1500) ) {
PrintAndLog("Command execute timeout");
c.d.asBytes[1] = oldblock2[1];
c.d.asBytes[2] = oldblock2[2];
c.d.asBytes[3] = oldblock2[3];
+ clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1500) ) {
PrintAndLog("Command execute timeout");
}
int CmdHF14AMfuGenDiverseKeys(const char *Cmd){
-
+
uint8_t iv[8] = { 0x00 };
uint8_t block = 0x07;
-
+
// UL-EV1
//04 57 b6 e2 05 3f 80 UID
//4a f8 4b 19 PWD
uint8_t mix[8] = { 0x00 };
uint8_t divkey[8] = { 0x00 };
-
+
memcpy(mix, mifarekeyA, 4);
-
+
mix[4] = mifarekeyA[4] ^ uid[0];
mix[5] = mifarekeyA[5] ^ uid[1];
mix[6] = block ^ uid[2];
mix[7] = uid[3];
-
- des3_context ctx = { 0x00 };
- des3_set2key_enc(&ctx, masterkey);
- des3_crypt_cbc(&ctx // des3_context
- , DES_ENCRYPT // int mode
+ mbedtls_des3_context ctx = { {0} };
+ mbedtls_des3_set2key_enc(&ctx, masterkey);
+
+ mbedtls_des3_crypt_cbc(&ctx // des3_context
+ , MBEDTLS_DES_ENCRYPT // int mode
, sizeof(mix) // length
, iv // iv[8]
, mix // input
PrintAndLog("Mifare key :\t %s", sprint_hex(mifarekeyA, sizeof(mifarekeyA)));
PrintAndLog("Message :\t %s", sprint_hex(mix, sizeof(mix)));
PrintAndLog("Diversified key: %s", sprint_hex(divkey+1, 6));
-
+
PrintAndLog("\n DES version");
-
+
for (int i=0; i < sizeof(mifarekeyA); ++i){
dkeyA[i] = (mifarekeyA[i] << 1) & 0xff;
dkeyA[6] |= ((mifarekeyA[i] >> 7) & 1) << (i+1);
memcpy(dmkey+8, dkeyB, 8);
memcpy(dmkey+16, dkeyA, 8);
memset(iv, 0x00, 8);
-
- des3_set3key_enc(&ctx, dmkey);
- des3_crypt_cbc(&ctx // des3_context
- , DES_ENCRYPT // int mode
+ mbedtls_des3_set3key_enc(&ctx, dmkey);
+
+ mbedtls_des3_crypt_cbc(&ctx // des3_context
+ , MBEDTLS_DES_ENCRYPT // int mode
, sizeof(newpwd) // length
, iv // iv[8]
, zeros // input
{"help", CmdHelp, 1, "This help"},
{"dbg", CmdHF14AMfDbg, 0, "Set default debug mode"},
{"info", CmdHF14AMfUInfo, 0, "Tag information"},
- {"dump", CmdHF14AMfUDump, 0, "Dump Ultralight / Ultralight-C tag to binary file"},
- {"rdbl", CmdHF14AMfURdBl, 0, "Read block - Ultralight"},
- {"wrbl", CmdHF14AMfUWrBl, 0, "Write block - Ultralight"},
- {"crdbl", CmdHF14AMfUCRdBl, 0, "Read block - Ultralight C"},
- {"cwrbl", CmdHF14AMfUCWrBl, 0, "Write block - Ultralight C"},
+ {"dump", CmdHF14AMfUDump, 0, "Dump Ultralight / Ultralight-C / NTAG tag to binary file"},
+ {"rdbl", CmdHF14AMfURdBl, 0, "Read block"},
+ {"wrbl", CmdHF14AMfUWrBl, 0, "Write block"},
{"cauth", CmdHF14AMfucAuth, 0, "Authentication - Ultralight C"},
{"setpwd", CmdHF14AMfucSetPwd, 1, "Set 3des password - Ultralight-C"},
{"setuid", CmdHF14AMfucSetUid, 1, "Set UID - MAGIC tags only"},
};
int CmdHFMFUltra(const char *Cmd){
- WaitForResponseTimeout(CMD_ACK,NULL,100);
+ (void)WaitForResponseTimeout(CMD_ACK,NULL,100);
CmdsParse(CommandTable, Cmd);
return 0;
}
projects / proxmark3-svn / blobdiff