ADD: @marshmellow42 's changes to "hf mfu *" ,

[proxmark3-svn] / client / cmdlft55xx.h

diff --git a/client/cmdlft55xx.h b/client/cmdlft55xx.h
index a64b1edab6cb27bba05d33c38c83039d33929f60..77963fde3a3e5881f24691b6e2dd87c794bf8315 100644 (file)
--- a/client/cmdlft55xx.h
+++ b/client/cmdlft55xx.h
@@ -10,6 +10,28 @@
 #ifndef CMDLFT55XX_H__\r
 #define CMDLFT55XX_H__\r
 \r
+// config blocks\r
+#define T55X7_DEFAULT_CONFIG_BLOCK      0x000880E8      // compat mode, data rate 32, manchester, ST, 7 data blocks\r
+#define T55X7_RAW_CONFIG_BLOCK          0x000880E0      // compat mode, data rate 32, manchester, 7 data blocks\r
+\r
+#define T55X7_EM_UNIQUE_CONFIG_BLOCK    0x00148040      // emulate em4x02/unique - compat mode, manchester, data rate 64, 2 data blocks\r
+\r
+\r
+// FDXB requires data inversion and BiPhase 57 is simply BipHase 50 inverted, so we can either do it using the modulation scheme or the inversion flag\r
+// we've done both below to prove that it works either way, and the modulation value for BiPhase 50 in the Atmel data sheet of binary "10001" (17) is a typo,\r
+// and it should actually be "10000" (16)\r
+// #define T55X7_FDXB_CONFIG_BLOCK         903F8080  // emulate fdx-b - xtended mode, BiPhase ('57), data rate 32, 4 data blocks\r
+#define T55X7_FDXB_CONFIG_BLOCK         0x903F0082  // emulate fdx-b - xtended mode, BiPhase ('50), invert data, data rate 32, 4 data blocks\r
+#define T55X7_HID_26_CONFIG_BLOCK       0x00107060  // hid 26 bit - compat mode, FSK2a, data rate 50, 3 data blocks\r
+#define T55X7_INDALA_64_CONFIG_BLOCK    0x00081040  // emulate indala 64 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 2\r
+#define T55X7_INDALA_224_CONFIG_BLOCK   0x000810E0  // emulate indala 224 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 7\r
+#define T55X7_GUARDPROXII_CONFIG_BLOCK 0x00150060      // bitrate 64pcb, Direct modulation, Biphase, 3 data blocks\r
+#define T55X7_VIKING_CONFIG_BLOCK              0x00088040      // compat mode, data rate 32, Manchester, 2 data blocks\r
+#define T55X7_NORALYS_CONFIG_BLOCK             0x00088C6A      // compat mode,   (NORALYS - KCP3000)\r
+#define T55X7_IOPROX_CONFIG_BLOCK              0x00147040  // maxblock 2\r
+#define T55X7_bin 0b0010\r
+\r
+\r
 typedef struct {\r
        enum {\r
                DEMOD_NRZ  = 0x00,    \r
@@ -38,7 +60,11 @@ typedef struct {
                RF_100 = 0x06,\r
                RF_128 = 0x07,\r
        } bitrate;\r
+       bool Q5;\r
 } t55xx_conf_block_t;\r
+t55xx_conf_block_t Get_t55xx_Config();\r
+void Set_t55xx_Config(t55xx_conf_block_t conf);\r
+\r
 \r
 int CmdLFT55XX(const char *Cmd);\r
 int CmdT55xxSetConfig(const char *Cmd);\r
@@ -47,20 +73,25 @@ int CmdT55xxWriteBlock(const char *Cmd);
 int CmdT55xxReadTrace(const char *Cmd);\r
 int CmdT55xxInfo(const char *Cmd);\r
 int CmdT55xxDetect(const char *Cmd);\r
+int CmdResetRead(const char *Cmd);\r
+int CmdT55xxWipe(const char *Cmd);\r
+int CmdT55xxBruteForce(const char *Cmd);\r
 \r
 char * GetBitRateStr(uint32_t id);\r
 char * GetSaferStr(uint32_t id);\r
 char * GetModulationStr( uint32_t id);\r
 char * GetModelStrFromCID(uint32_t cid);\r
 char * GetSelectedModulationStr( uint8_t id);\r
-uint32_t PackBits(uint8_t start, uint8_t len, uint8_t* bitstream);\r
+uint32_t PackBits(uint8_t start, uint8_t len, uint8_t *bitstream);\r
+void printT5xxHeader(uint8_t page);\r
 void printT55xxBlock(const char *demodStr);\r
-void printConfiguration( t55xx_conf_block_t b);\r
+int printConfiguration( t55xx_conf_block_t b);\r
 \r
 bool DecodeT55xxBlock();\r
 bool tryDetectModulation();\r
-bool test(uint8_t mode, uint8_t *offset);\r
+bool test(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk, bool *Q5);\r
 int special(const char *Cmd);\r
-int AquireData( uint8_t block );\r
+int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password );\r
 \r
+bool detectPassword(int password);\r
 #endif\r