ADD: lf indalademod output, The binary string is now printed with linebreaks every...

[proxmark3-svn] / armsrc / lfops.c

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index b509b5a9e2b067bb5bda82915ef9a7403ffc8add..00b5085204460ea9b1a1223757de95c599d208c5 100644 (file)
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -1065,7 +1065,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 #define WRITE_GAP 20*8 // was 160 // SPEC:  1*8 to 20*8 - typ 10*8 (or 10fc)
 #define WRITE_0   16*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc)
 #define WRITE_1   50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc)  432 for T55x7; 448 for E5550
 #define WRITE_GAP 20*8 // was 160 // SPEC:  1*8 to 20*8 - typ 10*8 (or 10fc)
 #define WRITE_0   16*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc)
 #define WRITE_1   50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc)  432 for T55x7; 448 for E5550

-#define READ_GAP  52*8 
+#define READ_GAP  15*8 

 
 //  VALUES TAKEN FROM EM4x function: SendForward
 //  START_GAP = 440;       (55*8) cycles at 125Khz (8us = 1cycle)
 
 //  VALUES TAKEN FROM EM4x function: SendForward
 //  START_GAP = 440;       (55*8) cycles at 125Khz (8us = 1cycle)


@@ -1132,7 +1132,7 @@ void T55xxResetRead(void) {
 }
 
 // Write one card block in page 0, no lock
 }
 
 // Write one card block in page 0, no lock

-void T55xxWriteBlockExt(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
+void T55xxWriteBlockExt(uint32_t Data, uint8_t Block, uint32_t Pwd, uint8_t arg) {

        LED_A_ON();
        bool PwdMode = arg & 0x1;
        uint8_t Page = (arg & 0x2)>>1;
        LED_A_ON();
        bool PwdMode = arg & 0x1;
        uint8_t Page = (arg & 0x2)>>1;


@@ -1178,12 +1178,12 @@ void T55xxWriteBlockExt(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg
 }
 
 // Write one card block in page 0, no lock
 }
 
 // Write one card block in page 0, no lock

-void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
+void T55xxWriteBlock(uint32_t Data, uint8_t Block, uint32_t Pwd, uint8_t arg) {

        T55xxWriteBlockExt(Data, Block, Pwd, arg);
        cmd_send(CMD_ACK,0,0,0,0,0);
 }
 
        T55xxWriteBlockExt(Data, Block, Pwd, arg);
        cmd_send(CMD_ACK,0,0,0,0,0);
 }
 

-// Read one card block in page 0
+// Read one card block in page [page]

 void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
        LED_A_ON();
        bool PwdMode = arg0 & 0x1;
 void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
        LED_A_ON();
        bool PwdMode = arg0 & 0x1;


@@ -1260,10 +1260,8 @@ void T55xxWakeUp(uint32_t Pwd){
 
 void WriteT55xx(uint32_t *blockdata, uint8_t startblock, uint8_t numblocks) {
        // write last block first and config block last (if included)
 
 void WriteT55xx(uint32_t *blockdata, uint8_t startblock, uint8_t numblocks) {
        // write last block first and config block last (if included)

-       for (uint8_t i = numblocks+startblock; i > startblock; i--) {
-               //Dbprintf("write- Blk: %d, d:%08X",i-1,blockdata[i-1]);
+       for (uint8_t i = numblocks+startblock; i > startblock; i--)

                T55xxWriteBlockExt(blockdata[i-1],i-1,0,0);
                T55xxWriteBlockExt(blockdata[i-1],i-1,0,0);

-       }

 }
 
 // Copy HID id to card and setup block 0 config
 }
 
 // Copy HID id to card and setup block 0 config


@@ -1304,6 +1302,9 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) {
        // load chip config block
        data[0] = T55x7_BITRATE_RF_50 | T55x7_MODULATION_FSK2a | last_block << T55x7_MAXBLOCK_SHIFT;
 
        // load chip config block
        data[0] = T55x7_BITRATE_RF_50 | T55x7_MODULATION_FSK2a | last_block << T55x7_MAXBLOCK_SHIFT;
 

+       //TODO add selection of chip for Q5 or T55x7
+       // data[0] = (((50-2)/2)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_FSK2 | T5555_INVERT_OUTPUT | last_block << T5555_MAXBLOCK_SHIFT;
+

        LED_D_ON();
        // Program the data blocks for supplied ID
        // and the block 0 for HID format
        LED_D_ON();
        // Program the data blocks for supplied ID
        // and the block 0 for HID format


@@ -1316,6 +1317,8 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) {
 
 void CopyIOtoT55x7(uint32_t hi, uint32_t lo) {
        uint32_t data[] = {T55x7_BITRATE_RF_64 | T55x7_MODULATION_FSK2a | (2 << T55x7_MAXBLOCK_SHIFT), hi, lo};
 
 void CopyIOtoT55x7(uint32_t hi, uint32_t lo) {
        uint32_t data[] = {T55x7_BITRATE_RF_64 | T55x7_MODULATION_FSK2a | (2 << T55x7_MAXBLOCK_SHIFT), hi, lo};

+       //TODO add selection of chip for Q5 or T55x7
+       // data[0] = (((64-2)/2)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_FSK2 | T5555_INVERT_OUTPUT | 2 << T5555_MAXBLOCK_SHIFT;

 
        LED_D_ON();
        // Program the data blocks for supplied ID
 
        LED_D_ON();
        // Program the data blocks for supplied ID


@@ -1332,6 +1335,9 @@ void CopyIndala64toT55x7(uint32_t hi, uint32_t lo) {
        //Program the 2 data blocks for supplied 64bit UID
        // and the Config for Indala 64 format (RF/32;PSK1 with RF/2;Maxblock=2)
        uint32_t data[] = { T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK1 | (2 << T55x7_MAXBLOCK_SHIFT), hi, lo};
        //Program the 2 data blocks for supplied 64bit UID
        // and the Config for Indala 64 format (RF/32;PSK1 with RF/2;Maxblock=2)
        uint32_t data[] = { T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK1 | (2 << T55x7_MAXBLOCK_SHIFT), hi, lo};

+       //TODO add selection of chip for Q5 or T55x7
+       // data[0] = (((32-2)/2)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK1 | 2 << T5555_MAXBLOCK_SHIFT;
+

        WriteT55xx(data, 0, 3);
        //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=2;Inverse data)
        //      T5567WriteBlock(0x603E1042,0);
        WriteT55xx(data, 0, 3);
        //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=2;Inverse data)
        //      T5567WriteBlock(0x603E1042,0);


@@ -1344,6 +1350,8 @@ void CopyIndala224toT55x7(uint32_t uid1, uint32_t uid2, uint32_t uid3, uint32_t
        // and the block 0 for Indala224 format 
        //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7)
        data[0] = T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK1 | (7 << T55x7_MAXBLOCK_SHIFT);
        // and the block 0 for Indala224 format 
        //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7)
        data[0] = T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK1 | (7 << T55x7_MAXBLOCK_SHIFT);

+       //TODO add selection of chip for Q5 or T55x7
+       // data[0] = (((32-2)/2)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK1 | 7 << T5555_MAXBLOCK_SHIFT;

        WriteT55xx(data, 0, 8);
        //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
        //      T5567WriteBlock(0x603E10E2,0);
        WriteT55xx(data, 0, 8);
        //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
        //      T5567WriteBlock(0x603E10E2,0);


@@ -1415,19 +1423,20 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) {
 
        // Write EM410x ID
        uint32_t data[] = {0, id>>32, id & 0xFFFFFFFF};
 
        // Write EM410x ID
        uint32_t data[] = {0, id>>32, id & 0xFFFFFFFF};

-       if (card) {
+

                clock = (card & 0xFF00) >> 8;
                clock = (clock == 0) ? 64 : clock;
                Dbprintf("Clock rate: %d", clock);
                clock = (card & 0xFF00) >> 8;
                clock = (clock == 0) ? 64 : clock;
                Dbprintf("Clock rate: %d", clock);

+       if (card & 0xFF) { //t55x7

                clock = GetT55xxClockBit(clock);
                if (clock == 0) {
                        Dbprintf("Invalid clock rate: %d", clock);
                        return;
                }
                clock = GetT55xxClockBit(clock);
                if (clock == 0) {
                        Dbprintf("Invalid clock rate: %d", clock);
                        return;
                }

-

                data[0] = clock | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT);
                data[0] = clock | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT);

-       } else {
-               data[0] = (0x1F << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | (2 << T5555_MAXBLOCK_SHIFT);
+       } else { //t5555 (Q5)
+               clock = (clock-2)>>1;  //n = (RF-2)/2
+               data[0] = (clock << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | (2 << T5555_MAXBLOCK_SHIFT);

        }
 
        WriteT55xx(data, 0, 3);
        }
 
        WriteT55xx(data, 0, 3);


@@ -1454,6 +1463,15 @@ uint8_t * fwd_write_ptr; //forwardlink bit pointer
 // prepares command bits
 // see EM4469 spec
 //====================================================================
 // prepares command bits
 // see EM4469 spec
 //====================================================================

+//--------------------------------------------------------------------
+//  VALUES TAKEN FROM EM4x function: SendForward
+//  START_GAP = 440;       (55*8) cycles at 125Khz (8us = 1cycle)
+//  WRITE_GAP = 128;       (16*8)
+//  WRITE_1   = 256 32*8;  (32*8) 
+
+//  These timings work for 4469/4269/4305 (with the 55*8 above)
+//  WRITE_0 = 23*8 , 9*8  SpinDelayUs(23*8); 
+

 uint8_t Prepare_Cmd( uint8_t cmd ) {
 
        *forward_ptr++ = 0; //start bit
 uint8_t Prepare_Cmd( uint8_t cmd ) {
 
        *forward_ptr++ = 0; //start bit


@@ -1641,13 +1659,10 @@ void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode
 }
 
 void CopyViKingtoT55x7(uint32_t block1, uint32_t block2) {
 }
 
 void CopyViKingtoT55x7(uint32_t block1, uint32_t block2) {

-    LED_D_ON();
-    T55xxWriteBlock(block1,1,0,0);
-    T55xxWriteBlock(block2,2,0,0);
-       T55xxWriteBlock(T55x7_MODULATION_MANCHESTER | T55x7_BITRATE_RF_32 | 2 << T55x7_MAXBLOCK_SHIFT,0,0,0);
-    // T55xxWriteBlock(T55x7_MODULATION_MANCHESTER | T55x7_BITRATE_RF_32 | 2 << T5555_MAXBLOCK_SHIFT,0,0,1);
-       // ICEMAN NOTES:
-       // Shouldn't this one be: T55x7_MAXBLOCK_SHIFT  and 0 in password mode
-    LED_D_OFF();
+
+       uint32_t data[] = {T55x7_BITRATE_RF_32 | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT), block1, block2};
+       // Program the data blocks for supplied ID and the block 0 config
+       WriteT55xx(data, 0, 3);
+       LED_D_OFF();

 }
 
 }