#include <stdio.h>\r
#include <limits.h>\r
#include <math.h>\r
-#include <unistd.h>\r
\r
#include "prox.h"\r
#include "../common/iso14443_crc.c"\r
} while (go);\r
}\r
\r
+/* Read the transmitted data of an EM4x50 tag\r
+ * Format:\r
+ *\r
+ * XXXXXXXX [row parity bit (even)] <- 8 bits plus parity\r
+ * XXXXXXXX [row parity bit (even)] <- 8 bits plus parity\r
+ * XXXXXXXX [row parity bit (even)] <- 8 bits plus parity\r
+ * XXXXXXXX [row parity bit (even)] <- 8 bits plus parity\r
+ * CCCCCCCC <- column parity bits\r
+ * 0 <- stop bit\r
+ * LW <- Listen Window\r
+ *\r
+ * This pattern repeats for every block of data being transmitted.\r
+ * Transmission starts with two Listen Windows (LW - a modulated\r
+ * pattern of 320 cycles each (32/32/128/64/64)).\r
+ *\r
+ * Note that this data may or may not be the UID. It is whatever data\r
+ * is stored in the blocks defined in the control word First and Last \r
+ * Word Read values. UID is stored in block 32.\r
+ */ \r
+static void CmdEM4x50read(char *str)\r
+{\r
+ int i, j, startblock, clock, skip, block, start, end, low, high;\r
+ BOOL complete= FALSE;\r
+ int tmpbuff[MAX_GRAPH_TRACE_LEN / 64];\r
+ char tmp[6];\r
+\r
+ high= low= 0;\r
+ clock= 64;\r
+\r
+ /* first get high and low values */\r
+ for (i = 0; i < GraphTraceLen; i++)\r
+ {\r
+ if (GraphBuffer[i] > high) \r
+ high = GraphBuffer[i];\r
+ else if (GraphBuffer[i] < low)\r
+ low = GraphBuffer[i];\r
+ }\r
+\r
+ /* populate a buffer with pulse lengths */\r
+ i= 0;\r
+ j= 0;\r
+ while(i < GraphTraceLen)\r
+ {\r
+ // measure from low to low\r
+ while(GraphBuffer[i] > low)\r
+ ++i;\r
+ start= i;\r
+ while(GraphBuffer[i] < high)\r
+ ++i;\r
+ while(GraphBuffer[i] > low)\r
+ ++i;\r
+ tmpbuff[j++]= i - start;\r
+ }\r
+\r
+ \r
+ /* look for data start - should be 2 pairs of LW (pulses of 192,128) */\r
+ start= -1;\r
+ skip= 0;\r
+ for (i= 0; i < j - 4 ; ++i)\r
+ {\r
+ skip += tmpbuff[i];\r
+ if (tmpbuff[i] >= 190 && tmpbuff[i] <= 194)\r
+ if (tmpbuff[i+1] >= 126 && tmpbuff[i+1] <= 130)\r
+ if (tmpbuff[i+2] >= 190 && tmpbuff[i+2] <= 194)\r
+ if (tmpbuff[i+3] >= 126 && tmpbuff[i+3] <= 130)\r
+ {\r
+ start= i + 3;\r
+ break;\r
+ }\r
+ }\r
+ startblock= i + 3;\r
+\r
+ /* skip over the remainder of the LW */\r
+ skip += tmpbuff[i+1]+tmpbuff[i+2];\r
+ while(GraphBuffer[skip] > low)\r
+ ++skip;\r
+ skip += 8;\r
+\r
+ /* now do it again to find the end */\r
+ end= start;\r
+ for (i += 3; i < j - 4 ; ++i)\r
+ {\r
+ end += tmpbuff[i];\r
+ if (tmpbuff[i] >= 190 && tmpbuff[i] <= 194)\r
+ if (tmpbuff[i+1] >= 126 && tmpbuff[i+1] <= 130)\r
+ if (tmpbuff[i+2] >= 190 && tmpbuff[i+2] <= 194)\r
+ if (tmpbuff[i+3] >= 126 && tmpbuff[i+3] <= 130)\r
+ {\r
+ complete= TRUE;\r
+ break;\r
+ }\r
+ }\r
+\r
+ if (start >= 0)\r
+ PrintToScrollback("Found data at sample: %i",skip);\r
+ else\r
+ {\r
+ PrintToScrollback("No data found!");\r
+ PrintToScrollback("Try again with more samples.");\r
+ return;\r
+ }\r
+\r
+ if (!complete)\r
+ {\r
+ PrintToScrollback("*** Warning!");\r
+ PrintToScrollback("Partial data - no end found!");\r
+ PrintToScrollback("Try again with more samples.");\r
+ }\r
+\r
+ /* get rid of leading crap */\r
+ sprintf(tmp,"%i",skip);\r
+ CmdLtrim(tmp);\r
+\r
+ /* now work through remaining buffer printing out data blocks */\r
+ block= 0;\r
+ i= startblock;\r
+ while(block < 6)\r
+ {\r
+ PrintToScrollback("Block %i:", block);\r
+ // mandemod routine needs to be split so we can call it for data\r
+ // just print for now for debugging\r
+ Cmdmanchesterdemod("i 64");\r
+ skip= 0;\r
+ /* look for LW before start of next block */\r
+ for ( ; i < j - 4 ; ++i)\r
+ {\r
+ skip += tmpbuff[i];\r
+ if (tmpbuff[i] >= 190 && tmpbuff[i] <= 194)\r
+ if (tmpbuff[i+1] >= 126 && tmpbuff[i+1] <= 130)\r
+ break;\r
+ }\r
+ while(GraphBuffer[skip] > low)\r
+ ++skip;\r
+ skip += 8;\r
+ sprintf(tmp,"%i",skip);\r
+ CmdLtrim(tmp);\r
+ start += skip;\r
+ block++;\r
+ }\r
+}\r
+\r
+\r
/* Read the ID of an EM410x tag.\r
* Format:\r
* 1111 1111 1 <-- standard non-repeatable header\r
static void CmdLosim(char *str)\r
{\r
int i;\r
- char *zero = "0";\r
\r
/* convert to bitstream if necessary */\r
ChkBitstream(str);\r
SendCommand(&c, FALSE);\r
}\r
\r
+static void CmdDetectReader(char *str)\r
+{\r
+ UsbCommand c;\r
+ // 'l' means LF - 125/134 kHz\r
+ if(*str == 'l') {\r
+ c.ext1 = 1;\r
+ } else if (*str == 'h') {\r
+ c.ext1 = 2;\r
+ } else if (*str != '\0') {\r
+ PrintToScrollback("use 'detectreader' or 'detectreader l' or 'detectreader h'");\r
+ return;\r
+ }\r
+ c.cmd = CMD_LISTEN_READER_FIELD;\r
+ SendCommand(&c, FALSE);\r
+}\r
+\r
/* send a command before reading */\r
static void CmdLoCommandRead(char *str)\r
{\r
c.cmd = CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K;\r
sscanf(str, "%i %i %i %s %s", &c.ext1, &c.ext2, &c.ext3, &c.d.asBytes,&dummy+1);\r
// in case they specified 'h'\r
- strcpy(&c.d.asBytes + strlen(c.d.asBytes),dummy);\r
+ strcpy((char *)&c.d.asBytes + strlen((char *)c.d.asBytes), dummy);\r
SendCommand(&c, FALSE);\r
}\r
\r
\r
static void Cmdaskdemod(char *str) {\r
int i;\r
- int n = 0;\r
- int c,high,low = 0;\r
+ int c, high = 0, low = 0;\r
\r
// TODO: complain if we do not give 2 arguments here !\r
sscanf(str, "%i", &c);\r
* Typical values can be 64, 32, 128...\r
*/\r
static void Cmdmanchesterdemod(char *str) {\r
- int i, j;\r
+ int i, j, invert= 0;\r
int bit;\r
int clock;\r
int lastval;\r
int bit2idx = 0;\r
int warnings = 0;\r
\r
+ /* check if we're inverting output */\r
+ if(*str == 'i')\r
+ {\r
+ PrintToScrollback("Inverting output");\r
+ invert= 1;\r
+ do\r
+ ++str;\r
+ while(*str == ' '); // in case a 2nd argument was given\r
+ }\r
+\r
/* Holds the decoded bitstream: each clock period contains 2 bits */\r
/* later simplified to 1 bit after manchester decoding. */\r
/* Add 10 bits to allow for noisy / uncertain traces without aborting */\r
if (!hithigh || !hitlow)\r
bit ^= 1;\r
\r
- BitStream[bit2idx++] = bit;\r
+ BitStream[bit2idx++] = bit ^ invert;\r
}\r
}\r
\r
else\r
{\r
\r
- /* Then detect duration between 2 successive transitions */\r
+ /* Then detect duration between 2 successive transitions */\r
for (bitidx = 1; i < GraphTraceLen; i++)\r
{\r
if (GraphBuffer[i-1] != GraphBuffer[i])\r
PrintToScrollback("Error: too many detection errors, aborting.");\r
return;\r
}\r
+ }\r
}\r
}\r
- }\r
\r
- // At this stage, we now have a bitstream of "01" ("1") or "10" ("0"), parse it into final decoded bitstream\r
- // Actually, we overwrite BitStream with the new decoded bitstream, we just need to be careful\r
- // to stop output at the final bitidx2 value, not bitidx\r
- for (i = 0; i < bitidx; i += 2) {\r
- if ((BitStream[i] == 0) && (BitStream[i+1] == 1)) {\r
- BitStream[bit2idx++] = 1;\r
+ // At this stage, we now have a bitstream of "01" ("1") or "10" ("0"), parse it into final decoded bitstream\r
+ // Actually, we overwrite BitStream with the new decoded bitstream, we just need to be careful\r
+ // to stop output at the final bitidx2 value, not bitidx\r
+ for (i = 0; i < bitidx; i += 2) {\r
+ if ((BitStream[i] == 0) && (BitStream[i+1] == 1)) {\r
+ BitStream[bit2idx++] = 1 ^ invert;\r
} else if ((BitStream[i] == 1) && (BitStream[i+1] == 0)) {\r
- BitStream[bit2idx++] = 0;\r
+ BitStream[bit2idx++] = 0 ^ invert;\r
} else {\r
// We cannot end up in this state, this means we are unsynchronized,\r
// move up 1 bit:\r
PrintToScrollback("Error: too many decode errors, aborting.");\r
return;\r
}\r
- }\r
- }\r
+ }\r
+ } \r
}\r
\r
PrintToScrollback("Manchester decoded bitstream");\r
"buffclear", CmdBuffClear,0, " Clear sample buffer and graph window",\r
"dec", CmdDec,1, " Decimate samples",\r
"detectclock", Cmddetectclockrate,1, " Detect clock rate",\r
+ "detectreader", CmdDetectReader,0, "['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)",\r
"em410xsim", CmdEM410xsim,1, "<UID> -- Simulate EM410x tag",\r
"em410xread", CmdEM410xread,1, "[clock rate] -- Extract ID from EM410x tag",\r
"em410xwatch", CmdEM410xwatch,0, " Watches for EM410x tags",\r
+ "em4x50read", CmdEM4x50read,1, " Extract data from EM4x50 tag",\r
"exit", CmdQuit,1, " Exit program",\r
"flexdemod", CmdFlexdemod,1, " Demodulate samples for FlexPass",\r
"fpgaoff", CmdFPGAOff,0, " Set FPGA off", // ## FPGA Control\r
"hisamplest", CmdHi14readt,0, " Get samples HF, for testing",\r
"hisimlisten", CmdHisimlisten,0, " Get HF samples as fake tag",\r
"hpf", CmdHpf,1, " Remove DC offset from trace",\r
- "indalademod", CmdIndalademod,0, "['224'] -- Demodulate samples for Indala",\r
+ "indalademod", CmdIndalademod,0, "['224'] -- Demodulate samples for Indala 64 bit UID (option '224' for 224 bit)",\r
"lcd", CmdLcd,0, "<HEX command> <count> -- Send command/data to LCD",\r
"lcdreset", CmdLcdReset,0, " Hardware reset LCD",\r
"load", CmdLoad,1, "<filename> -- Load trace (to graph window",\r
"losamples", CmdLosamples,0, "[128 - 16000] -- Get raw samples for LF tag",\r
"losim", CmdLosim,0, " Simulate LF tag",\r
"ltrim", CmdLtrim,1, "<samples> -- Trim samples from left of trace",\r
- "mandemod", Cmdmanchesterdemod,1, "[clock rate] -- Try a Manchester demodulation on a binary stream",\r
+ "mandemod", Cmdmanchesterdemod,1, "[i] [clock rate] -- Manchester demodulate binary stream (option 'i' to invert output)",\r
"manmod", Cmdmanchestermod,1, "[clock rate] -- Manchester modulate a binary stream",\r
"norm", CmdNorm,1, " Normalize max/min to +/-500",\r
"plot", CmdPlot,1, " Show graph window",\r
projects / proxmark3-svn / blobdiff