#include <stdio.h>\r
#include <string.h>\r
#include <inttypes.h>\r
+#include <time.h>\r
#include "proxmark3.h"\r
#include "ui.h"\r
#include "graph.h"\r
\r
#define CONFIGURATION_BLOCK 0x00\r
#define TRACE_BLOCK 0x01\r
+#define T55x7_PWD 0x00000010\r
\r
// Default configuration\r
t55xx_conf_block_t config = { .modulation = DEMOD_ASK, .inverted = FALSE, .offset = 0x00, .block0 = 0x00};\r
\r
int usage_t55xx_config(){\r
PrintAndLog("Usage: lf t55xx config [d <demodulation>] [i 1] [o <offset>]");\r
- PrintAndLog("Options: ");\r
+ PrintAndLog("Options:");\r
PrintAndLog(" h This help");\r
PrintAndLog(" b <8|16|32|40|50|64|100|128> Set bitrate");\r
- PrintAndLog(" d <FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NZ|BI|BIa> Set demodulation FSK / ASK / PSK / NZ / Biphase / Biphase A");\r
+ PrintAndLog(" d <FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NRZ|BI|BIa> Set demodulation FSK / ASK / PSK / NRZ / Biphase / Biphase A");\r
PrintAndLog(" i [1] Invert data signal, defaults to normal");\r
PrintAndLog(" o [offset] Set offset, where data should start decode in bitstream");\r
PrintAndLog("");\r
return 0;\r
}\r
int usage_t55xx_read(){\r
- PrintAndLog("Usage: lf t55xx read <block> <password>");\r
- PrintAndLog(" <block>, block number to read. Between 0-7");\r
- PrintAndLog(" <password>, OPTIONAL password (8 hex characters)");\r
+ PrintAndLog("Usage: lf t55xx read b <block> p <password> <override_safety>");\r
+ PrintAndLog("Options:");\r
+ PrintAndLog(" b <block>, block number to read. Between 0-7");\r
+ PrintAndLog(" p <password>, OPTIONAL password 4bytes (8 hex symbols)");\r
+ PrintAndLog(" o, OPTIONAL override safety check");\r
+ PrintAndLog(" ****WARNING****");\r
+ PrintAndLog(" Use of read with password on a tag not configured for a pwd");\r
+ PrintAndLog(" can damage the tag");\r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
- PrintAndLog(" lf t55xx read 0 - read data from block 0");\r
- PrintAndLog(" lf t55xx read 0 feedbeef - read data from block 0 password feedbeef");\r
+ PrintAndLog(" lf t55xx read b 0 - read data from block 0");\r
+ PrintAndLog(" lf t55xx read b 0 p feedbeef - read data from block 0 password feedbeef");\r
+ PrintAndLog(" lf t55xx read b 0 p feedbeef o - read data from block 0 password feedbeef safety check");\r
PrintAndLog("");\r
return 0;\r
}\r
int usage_t55xx_write(){\r
- PrintAndLog("Usage: lf t55xx wr <block> <data> [password]");\r
- PrintAndLog(" <block>, block number to read. Between 0-7");\r
- PrintAndLog(" <data>, 4 bytes of data to write (8 hex characters)");\r
- PrintAndLog(" [password], OPTIONAL password 4bytes (8 hex characters)");\r
+ PrintAndLog("Usage: lf t55xx write <block> <data> [password]");\r
+ PrintAndLog("Options:");\r
+ PrintAndLog(" <block>, block number to write. Between 0-7");\r
+ PrintAndLog(" <data>, 4 bytes of data to write (8 hex symbols)");\r
+ PrintAndLog(" [password], OPTIONAL password 4bytes (8 hex symbols)");\r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
- PrintAndLog(" lf t55xx wd 3 11223344 - write 11223344 to block 3");\r
- PrintAndLog(" lf t55xx wd 3 11223344 feedbeef - write 11223344 to block 3 password feedbeef");\r
+ PrintAndLog(" lf t55xx write 3 11223344 - write 11223344 to block 3");\r
+ PrintAndLog(" lf t55xx write 3 11223344 feedbeef - write 11223344 to block 3 password feedbeef");\r
PrintAndLog("");\r
return 0;\r
}\r
int usage_t55xx_trace() {\r
PrintAndLog("Usage: lf t55xx trace [1]");\r
+ PrintAndLog("Options:");\r
PrintAndLog(" [graph buffer data], if set, use Graphbuffer otherwise read data from tag.");\r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
}\r
int usage_t55xx_info() {\r
PrintAndLog("Usage: lf t55xx info [1]");\r
+ PrintAndLog("Options:");\r
PrintAndLog(" [graph buffer data], if set, use Graphbuffer otherwise read data from tag.");\r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
}\r
int usage_t55xx_dump(){\r
PrintAndLog("Usage: lf t55xx dump <password>");\r
+ PrintAndLog("Options:");\r
PrintAndLog(" <password>, OPTIONAL password 4bytes (8 hex symbols)");\r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
return 0;\r
}\r
int usage_t55xx_detect(){\r
- PrintAndLog("Usage: lf t55xx detect");\r
+ PrintAndLog("Usage: lf t55xx detect [1]");\r
+ PrintAndLog("Options:");\r
+ PrintAndLog(" [graph buffer data], if set, use Graphbuffer otherwise read data from tag.");\r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
PrintAndLog(" lf t55xx detect");\r
PrintAndLog("");\r
return 0;\r
}\r
+int usage_t55xx_wakup(){\r
+ PrintAndLog("Usage: lf t55xx wakeup [h] p <password>");\r
+ PrintAndLog("This commands send the Answer-On-Request command and leaves the readerfield ON afterwards.");\r
+ PrintAndLog("Options:");\r
+ PrintAndLog(" h - this help");\r
+ PrintAndLog(" p <password> - password 4bytes (8 hex symbols)");\r
+ PrintAndLog("");\r
+ PrintAndLog("Examples:");\r
+ PrintAndLog(" lf t55xx wakeup p 11223344 - send wakeup password");\r
+ return 0;\r
+}\r
\r
static int CmdHelp(const char *Cmd);\r
\r
param_getstr(Cmd, cmdp+1, modulation);\r
cmdp += 2;\r
\r
- if ( strcmp(modulation, "FSK" ) == 0)\r
+ if ( strcmp(modulation, "FSK" ) == 0) {\r
config.modulation = DEMOD_FSK;\r
- else if ( strcmp(modulation, "FSK1" ) == 0)\r
+ } else if ( strcmp(modulation, "FSK1" ) == 0) {\r
config.modulation = DEMOD_FSK1;\r
- else if ( strcmp(modulation, "FSK1a" ) == 0)\r
+ config.inverted=1;\r
+ } else if ( strcmp(modulation, "FSK1a" ) == 0) {\r
config.modulation = DEMOD_FSK1a;\r
- else if ( strcmp(modulation, "FSK2" ) == 0)\r
+ config.inverted=0;\r
+ } else if ( strcmp(modulation, "FSK2" ) == 0) {\r
config.modulation = DEMOD_FSK2;\r
- else if ( strcmp(modulation, "FSK2a" ) == 0)\r
+ config.inverted=0;\r
+ } else if ( strcmp(modulation, "FSK2a" ) == 0) {\r
config.modulation = DEMOD_FSK2a;\r
- else if ( strcmp(modulation, "ASK" ) == 0)\r
+ config.inverted=1;\r
+ } else if ( strcmp(modulation, "ASK" ) == 0) {\r
config.modulation = DEMOD_ASK;\r
- else if ( strcmp(modulation, "NRZ" ) == 0)\r
+ } else if ( strcmp(modulation, "NRZ" ) == 0) {\r
config.modulation = DEMOD_NRZ;\r
- else if ( strcmp(modulation, "PSK1" ) == 0)\r
+ } else if ( strcmp(modulation, "PSK1" ) == 0) {\r
config.modulation = DEMOD_PSK1;\r
- else if ( strcmp(modulation, "PSK2" ) == 0)\r
+ } else if ( strcmp(modulation, "PSK2" ) == 0) {\r
config.modulation = DEMOD_PSK2;\r
- else if ( strcmp(modulation, "PSK3" ) == 0)\r
+ } else if ( strcmp(modulation, "PSK3" ) == 0) {\r
config.modulation = DEMOD_PSK3;\r
- else if ( strcmp(modulation, "BIa" ) == 0)\r
+ } else if ( strcmp(modulation, "BIa" ) == 0) {\r
config.modulation = DEMOD_BIa;\r
- else if ( strcmp(modulation, "BI" ) == 0)\r
+ config.inverted=1;\r
+ } else if ( strcmp(modulation, "BI" ) == 0) {\r
config.modulation = DEMOD_BI;\r
- else {\r
+ config.inverted=0;\r
+ } else {\r
PrintAndLog("Unknown modulation '%s'", modulation);\r
errors = TRUE;\r
}\r
}\r
\r
// No args\r
- if (cmdp == 0) {\r
- printConfiguration( config );\r
- return 0;\r
- }\r
+ if (cmdp == 0) return printConfiguration( config );\r
+\r
//Validations\r
- if (errors)\r
- return usage_t55xx_config();\r
+ if (errors) return usage_t55xx_config();\r
\r
config.block0 = 0;\r
- printConfiguration ( config );\r
- return 0;\r
+ return printConfiguration ( config );\r
}\r
\r
int CmdT55xxReadBlock(const char *Cmd) {\r
- int block = -1;\r
- int password = 0xFFFFFFFF; //default to blank Block 7\r
-\r
- char cmdp = param_getchar(Cmd, 0);\r
- if (cmdp == 'h' || cmdp == 'H')\r
- return usage_t55xx_read();\r
-\r
- int res = sscanf(Cmd, "%d %x", &block, &password);\r
-\r
- if ( res < 1 || res > 2 )\r
- return usage_t55xx_read();\r
+ uint8_t block = 255;\r
+ uint32_t password = 0; //default to blank Block 7\r
+ bool usepwd = FALSE;\r
+ bool override = FALSE; \r
+ bool errors = FALSE;\r
+ uint8_t cmdp = 0;\r
+ while(param_getchar(Cmd, cmdp) != 0x00 && !errors) {\r
+ switch(param_getchar(Cmd, cmdp)) {\r
+ case 'h':\r
+ case 'H':\r
+ return usage_t55xx_read();\r
+ case 'b':\r
+ case 'B':\r
+ errors |= param_getdec(Cmd, cmdp+1, &block);\r
+ cmdp += 2;\r
+ break;\r
+ case 'o':\r
+ case 'O':\r
+ override = TRUE;\r
+ cmdp++;\r
+ break;\r
+ case 'p':\r
+ case 'P':\r
+ password = param_get32ex(Cmd, cmdp+1, 0xFFFFFFFF, 16);\r
+ usepwd = TRUE;\r
+ cmdp += 2;\r
+ break;\r
+ default:\r
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
+ errors = true;\r
+ break;\r
+ }\r
+ }\r
+ if (errors) return usage_t55xx_read();\r
\r
- \r
- if ((block < 0) | (block > 7)) {\r
+ if ( block > 7 ) {\r
PrintAndLog("Block must be between 0 and 7");\r
return 1;\r
} \r
\r
- UsbCommand c = {CMD_T55XX_READ_BLOCK, {0, block, 0}};\r
- c.d.asBytes[0] = 0x0; \r
+ UsbCommand c = {CMD_T55XX_READ_BLOCK, {0, block, password}};\r
\r
//Password mode\r
- if ( res == 2 ) {\r
- c.arg[2] = password;\r
- c.d.asBytes[0] = 0x1; \r
+ if ( usepwd ) {\r
+ \r
+ // try reading the config block and verify that PWD bit is set before doing this!\r
+ if ( !override ) {\r
+ AquireData( CONFIGURATION_BLOCK );\r
+ if ( !tryDetectModulation() ) {\r
+ PrintAndLog("Safety Check: Could not detect if PWD bit is set in config block. Exits.");\r
+ return 1;\r
+ } else { \r
+ PrintAndLog("Safety Check: PWD bit is NOT set in config block. Reading without password..."); \r
+ }\r
+ } else { \r
+ PrintAndLog("Safety Check Overriden - proceeding despite risk");\r
+ c.arg[0] = usepwd;\r
+ }\r
}\r
\r
+ clearCommandBuffer();\r
SendCommand(&c);\r
if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {\r
PrintAndLog("command execution time out");\r
uint8_t got[12000];\r
GetFromBigBuf(got,sizeof(got),0);\r
WaitForResponse(CMD_ACK,NULL);\r
- setGraphBuf(got, 12000);\r
- DemodBufferLen=0;\r
+ setGraphBuf(got, sizeof(got));\r
+\r
if (!DecodeT55xxBlock()) return 3;\r
+ \r
char blk[10]={0};\r
- sprintf(blk,"%d", block);\r
+ sprintf(blk,"%d", block); \r
printT55xxBlock(blk);\r
return 0;\r
}\r
\r
bool DecodeT55xxBlock(){\r
\r
- char buf[8] = {0x00};\r
+ char buf[30] = {0x00};\r
char *cmdStr = buf;\r
int ans = 0;\r
uint8_t bitRate[8] = {8,16,32,40,50,64,100,128};\r
-\r
DemodBufferLen = 0x00;\r
\r
+ //trim 1/2 a clock from beginning\r
+ //snprintf(cmdStr, sizeof(buf),"%d", bitRate[config.bitrate]/2 );\r
+ //CmdLtrim(cmdStr);\r
switch( config.modulation ){\r
case DEMOD_FSK:\r
- //CmdLtrim("26");\r
- sprintf(cmdStr,"%d", bitRate[config.bitrate]/2 );\r
- CmdLtrim(cmdStr); \r
- sprintf(cmdStr,"%d %d", bitRate[config.bitrate], config.inverted );\r
+ snprintf(cmdStr, sizeof(buf),"%d %d", bitRate[config.bitrate], config.inverted );\r
ans = FSKrawDemod(cmdStr, FALSE);\r
break;\r
case DEMOD_FSK1:\r
- //CmdLtrim("26");\r
- sprintf(cmdStr,"%d", bitRate[config.bitrate]/2 );\r
- CmdLtrim(cmdStr); \r
- sprintf(cmdStr,"%d 1 8 5", bitRate[config.bitrate] );\r
- ans = FSKrawDemod(cmdStr, FALSE);\r
- break;\r
case DEMOD_FSK1a:\r
- //CmdLtrim("26");\r
- sprintf(cmdStr,"%d", bitRate[config.bitrate]/2 );\r
- CmdLtrim(cmdStr); \r
- sprintf(cmdStr,"%d 0 8 5", bitRate[config.bitrate] );\r
+ snprintf(cmdStr, sizeof(buf),"%d %d 8 5", bitRate[config.bitrate], config.inverted );\r
ans = FSKrawDemod(cmdStr, FALSE);\r
break;\r
case DEMOD_FSK2:\r
- //CmdLtrim("26");\r
- sprintf(cmdStr,"%d", bitRate[config.bitrate]/2 );\r
- CmdLtrim(cmdStr); \r
- sprintf(cmdStr,"%d 0 10 8", bitRate[config.bitrate] );\r
- ans = FSKrawDemod(cmdStr, FALSE);\r
- break;\r
case DEMOD_FSK2a:\r
- //CmdLtrim("26");\r
- sprintf(cmdStr,"%d", bitRate[config.bitrate]/2 );\r
- CmdLtrim(cmdStr); \r
- sprintf(cmdStr,"%d 1 10 8", bitRate[config.bitrate] );\r
+ snprintf(cmdStr, sizeof(buf),"%d %d 10 8", bitRate[config.bitrate], config.inverted );\r
ans = FSKrawDemod(cmdStr, FALSE);\r
break;\r
case DEMOD_ASK:\r
- sprintf(cmdStr,"%d %d 1", bitRate[config.bitrate], config.inverted );\r
- ans = ASKmanDemod(cmdStr, FALSE, FALSE);\r
+ snprintf(cmdStr, sizeof(buf),"%d %d 0", bitRate[config.bitrate], config.inverted );\r
+ ans = ASKDemod(cmdStr, FALSE, FALSE, 1);\r
break;\r
case DEMOD_PSK1:\r
- sprintf(cmdStr,"%d %d 1", bitRate[config.bitrate], config.inverted );\r
+ snprintf(cmdStr, sizeof(buf),"%d %d 0", bitRate[config.bitrate], config.inverted );\r
ans = PSKDemod(cmdStr, FALSE);\r
break;\r
- case DEMOD_PSK2:\r
- sprintf(cmdStr,"%d 1", bitRate[config.bitrate] );\r
- ans = PSKDemod(cmdStr, FALSE);\r
- psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
- break;\r
- case DEMOD_PSK3:\r
- sprintf(cmdStr,"%d %d 1", bitRate[config.bitrate], config.inverted );\r
+ case DEMOD_PSK2: //inverted won't affect this\r
+ case DEMOD_PSK3: //not fully implemented\r
+ snprintf(cmdStr, sizeof(buf),"%d 0 1", bitRate[config.bitrate] );\r
ans = PSKDemod(cmdStr, FALSE);\r
psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
break;\r
case DEMOD_NRZ:\r
- sprintf(cmdStr,"%d %d 1", bitRate[config.bitrate], config.inverted );\r
+ snprintf(cmdStr, sizeof(buf),"%d %d 1", bitRate[config.bitrate], config.inverted );\r
ans = NRZrawDemod(cmdStr, FALSE);\r
break;\r
case DEMOD_BI:\r
- sprintf(cmdStr,"0 %d 0 1", bitRate[config.bitrate] );\r
- ans = ASKbiphaseDemod(cmdStr, FALSE);\r
- break;\r
case DEMOD_BIa:\r
- sprintf(cmdStr,"0 %d 1 1", bitRate[config.bitrate] );\r
+ snprintf(cmdStr, sizeof(buf),"0 %d %d 0", bitRate[config.bitrate], config.inverted );\r
ans = ASKbiphaseDemod(cmdStr, FALSE);\r
break;\r
default:\r
int CmdT55xxDetect(const char *Cmd){\r
\r
char cmdp = param_getchar(Cmd, 0);\r
- if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H')\r
- return usage_t55xx_detect();\r
+ if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') return usage_t55xx_detect();\r
\r
if (strlen(Cmd)==0)\r
AquireData( CONFIGURATION_BLOCK );\r
\r
// detect configuration?\r
bool tryDetectModulation(){\r
- char cmdStr[8] = {0};\r
+ //char cmdStr[8] = {0};\r
uint8_t hits = 0;\r
t55xx_conf_block_t tests[15];\r
- \r
+ int bitRate=0;\r
+ uint8_t fc1 = 0, fc2 = 0, clk=0;\r
+ save_restoreGB(1);\r
if (GetFskClock("", FALSE, FALSE)){ \r
- uint8_t fc1 = 0, fc2 = 0, clk=0;\r
fskClocks(&fc1, &fc2, &clk, FALSE);\r
- sprintf(cmdStr,"%d", clk/2);\r
- CmdLtrim(cmdStr);\r
- if ( FSKrawDemod("0 0", FALSE) && test(DEMOD_FSK, &tests[hits].offset)){\r
+ //sprintf(cmdStr,"%d", clk/2);\r
+ //CmdLtrim(cmdStr);\r
+ if ( FSKrawDemod("0 0", FALSE) && test(DEMOD_FSK, &tests[hits].offset, &bitRate)){\r
tests[hits].modulation = DEMOD_FSK;\r
if (fc1==8 && fc2 == 5)\r
tests[hits].modulation = DEMOD_FSK1a;\r
else if (fc1==10 && fc2 == 8)\r
tests[hits].modulation = DEMOD_FSK2;\r
-\r
+ tests[hits].bitrate = bitRate;\r
tests[hits].inverted = FALSE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
++hits;\r
}\r
- if ( FSKrawDemod("0 1", FALSE) && test(DEMOD_FSK, &tests[hits].offset)) {\r
+ if ( FSKrawDemod("0 1", FALSE) && test(DEMOD_FSK, &tests[hits].offset, &bitRate)) {\r
tests[hits].modulation = DEMOD_FSK;\r
- if (fc1==8 && fc2 == 5)\r
+ if (fc1 == 8 && fc2 == 5)\r
tests[hits].modulation = DEMOD_FSK1;\r
- else if (fc1==10 && fc2 == 8)\r
+ else if (fc1 == 10 && fc2 == 8)\r
tests[hits].modulation = DEMOD_FSK2a;\r
\r
+ tests[hits].bitrate = bitRate;\r
tests[hits].inverted = TRUE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
++hits;\r
}\r
} else {\r
- if ( ASKmanDemod("0 0 1", FALSE, FALSE) && test(DEMOD_ASK, &tests[hits].offset)) {\r
- tests[hits].modulation = DEMOD_ASK;\r
- tests[hits].inverted = FALSE;\r
- tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
- ++hits;\r
+ clk = GetAskClock("", FALSE, FALSE);\r
+ if (clk>0) {\r
+ //sprintf(cmdStr,"%d", clk/2);\r
+ //CmdLtrim(cmdStr);\r
+ if ( ASKDemod("0 0 0", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate)) {\r
+ tests[hits].modulation = DEMOD_ASK;\r
+ tests[hits].bitrate = bitRate;\r
+ tests[hits].inverted = FALSE;\r
+ tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ ++hits;\r
}\r
-\r
- if ( ASKmanDemod("0 1 1", FALSE, FALSE) && test(DEMOD_ASK, &tests[hits].offset)) {\r
- tests[hits].modulation = DEMOD_ASK;\r
- tests[hits].inverted = TRUE;\r
- tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
- ++hits;\r
+ if ( ASKDemod("0 1 0", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate)) {\r
+ tests[hits].modulation = DEMOD_ASK;\r
+ tests[hits].bitrate = bitRate;\r
+ tests[hits].inverted = TRUE;\r
+ tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ ++hits;\r
+ }\r
+ if ( ASKbiphaseDemod("0 0 0 0", FALSE) && test(DEMOD_BI, &tests[hits].offset, &bitRate) ) {\r
+ tests[hits].modulation = DEMOD_BI;\r
+ tests[hits].bitrate = bitRate;\r
+ tests[hits].inverted = FALSE;\r
+ tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ ++hits;\r
+ }\r
+ if ( ASKbiphaseDemod("0 0 1 0", FALSE) && test(DEMOD_BIa, &tests[hits].offset, &bitRate) ) {\r
+ tests[hits].modulation = DEMOD_BIa;\r
+ tests[hits].bitrate = bitRate;\r
+ tests[hits].inverted = TRUE;\r
+ tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ ++hits;\r
}\r
- \r
- if ( NRZrawDemod("0 0 1", FALSE) && test(DEMOD_NRZ, &tests[hits].offset)) {\r
- tests[hits].modulation = DEMOD_NRZ;\r
- tests[hits].inverted = FALSE;\r
- tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
- ++hits;\r
}\r
+ //undo trim from ask\r
+ save_restoreGB(0);\r
+ clk = GetNrzClock("", FALSE, FALSE);\r
+ if (clk>0) {\r
+ //sprintf(cmdStr,"%d", clk/2);\r
+ //CmdLtrim(cmdStr);\r
+ if ( NRZrawDemod("0 0 1", FALSE) && test(DEMOD_NRZ, &tests[hits].offset, &bitRate)) {\r
+ tests[hits].modulation = DEMOD_NRZ;\r
+ tests[hits].bitrate = bitRate;\r
+ tests[hits].inverted = FALSE;\r
+ tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ ++hits;\r
+ }\r
\r
- if ( NRZrawDemod("0 1 1", FALSE) && test(DEMOD_NRZ, &tests[hits].offset)) {\r
- tests[hits].modulation = DEMOD_NRZ;\r
- tests[hits].inverted = TRUE;\r
- tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
- ++hits;\r
+ if ( NRZrawDemod("0 1 1", FALSE) && test(DEMOD_NRZ, &tests[hits].offset, &bitRate)) {\r
+ tests[hits].modulation = DEMOD_NRZ;\r
+ tests[hits].bitrate = bitRate;\r
+ tests[hits].inverted = TRUE;\r
+ tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ ++hits;\r
}\r
- \r
- if ( PSKDemod("0 0 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset)) {\r
- tests[hits].modulation = DEMOD_PSK1;\r
- tests[hits].inverted = FALSE;\r
- tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
- ++hits;\r
}\r
\r
- if ( PSKDemod("0 1 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset)) {\r
- tests[hits].modulation = DEMOD_PSK1;\r
- tests[hits].inverted = TRUE;\r
- tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
- ++hits;\r
- }\r
-\r
- // PSK2 - needs a call to psk1TOpsk2.\r
- if ( PSKDemod("0 0 1", FALSE)) {\r
- psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
- if (test(DEMOD_PSK2, &tests[hits].offset)){\r
- tests[hits].modulation = DEMOD_PSK2;\r
+ //undo trim from nrz\r
+ save_restoreGB(0);\r
+ clk = GetPskClock("", FALSE, FALSE);\r
+ if (clk>0) {\r
+ //PrintAndLog("clk %d",clk);\r
+ //sprintf(cmdStr,"%d", clk/2);\r
+ //CmdLtrim(cmdStr); \r
+ if ( PSKDemod("0 0 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate)) {\r
+ tests[hits].modulation = DEMOD_PSK1;\r
+ tests[hits].bitrate = bitRate;\r
tests[hits].inverted = FALSE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
++hits;\r
}\r
- } // inverse waves does not affect this demod\r
-\r
- // PSK3 - needs a call to psk1TOpsk2.\r
- if ( PSKDemod("0 0 1", FALSE)) {\r
- psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
- if (test(DEMOD_PSK3, &tests[hits].offset)){\r
- tests[hits].modulation = DEMOD_PSK3;\r
- tests[hits].inverted = FALSE;\r
+ if ( PSKDemod("0 1 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate)) {\r
+ tests[hits].modulation = DEMOD_PSK1;\r
+ tests[hits].bitrate = bitRate;\r
+ tests[hits].inverted = TRUE;\r
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
++hits;\r
}\r
- } // inverse waves does not affect this demod\r
- \r
- if ( ASKbiphaseDemod("0 0 0 1", FALSE) && test(DEMOD_BI, &tests[hits].offset) ) {\r
- tests[hits].modulation = DEMOD_BI;\r
- tests[hits].inverted = FALSE;\r
- tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
- ++hits;\r
- }\r
- if ( ASKbiphaseDemod("0 0 1 1", FALSE) && test(DEMOD_BIa, &tests[hits].offset) ) {\r
- tests[hits].modulation = DEMOD_BIa;\r
- tests[hits].inverted = TRUE;\r
- tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
- ++hits;\r
+ // PSK2 - needs a call to psk1TOpsk2.\r
+ if ( PSKDemod("0 0 1", FALSE)) {\r
+ psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
+ if (test(DEMOD_PSK2, &tests[hits].offset, &bitRate)){\r
+ tests[hits].modulation = DEMOD_PSK2;\r
+ tests[hits].bitrate = bitRate;\r
+ tests[hits].inverted = FALSE;\r
+ tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ ++hits;\r
+ }\r
+ } // inverse waves does not affect this demod\r
+ // PSK3 - needs a call to psk1TOpsk2.\r
+ if ( PSKDemod("0 0 1", FALSE)) {\r
+ psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
+ if (test(DEMOD_PSK3, &tests[hits].offset, &bitRate)){\r
+ tests[hits].modulation = DEMOD_PSK3;\r
+ tests[hits].bitrate = bitRate;\r
+ tests[hits].inverted = FALSE;\r
+ tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+ ++hits;\r
+ }\r
+ } // inverse waves does not affect this demod\r
}\r
} \r
if ( hits == 1) {\r
config.modulation = tests[0].modulation;\r
+ config.bitrate = tests[0].bitrate;\r
config.inverted = tests[0].inverted;\r
config.offset = tests[0].offset;\r
config.block0 = tests[0].block0;\r
uint8_t detRate = 0;\r
switch( mod ){\r
case DEMOD_FSK:\r
- detRate = GetFskClock("",FALSE, FALSE); \r
- if (expected[readRate] == detRate) {\r
- config.bitrate = readRate;\r
- return TRUE;\r
- }\r
- break;\r
case DEMOD_FSK1:\r
- detRate = GetFskClock("",FALSE, FALSE); \r
- if (expected[readRate] == detRate) {\r
- config.bitrate = readRate;\r
- return TRUE;\r
- }\r
- break;\r
case DEMOD_FSK1a:\r
- detRate = GetFskClock("",FALSE, FALSE); \r
- if (expected[readRate] == detRate) {\r
- config.bitrate = readRate;\r
- return TRUE;\r
- }\r
- break;\r
case DEMOD_FSK2:\r
- detRate = GetFskClock("",FALSE, FALSE); \r
- if (expected[readRate] == detRate) {\r
- config.bitrate = readRate;\r
- return TRUE;\r
- }\r
- break;\r
case DEMOD_FSK2a:\r
detRate = GetFskClock("",FALSE, FALSE); \r
- if (expected[readRate] == detRate) {\r
- config.bitrate = readRate;\r
+ if (expected[readRate] == detRate) \r
return TRUE;\r
- }\r
break;\r
case DEMOD_ASK:\r
+ case DEMOD_BI:\r
+ case DEMOD_BIa:\r
detRate = GetAskClock("",FALSE, FALSE); \r
- if (expected[readRate] == detRate) {\r
- config.bitrate = readRate;\r
+ if (expected[readRate] == detRate) \r
return TRUE;\r
- }\r
break;\r
case DEMOD_PSK1:\r
- detRate = GetPskClock("",FALSE, FALSE); \r
- if (expected[readRate] == detRate) {\r
- config.bitrate = readRate;\r
- return TRUE;\r
- }\r
- break;\r
case DEMOD_PSK2:\r
- detRate = GetPskClock("",FALSE, FALSE); \r
- if (expected[readRate] == detRate) {\r
- config.bitrate = readRate;\r
- return TRUE;\r
- }\r
- break;\r
case DEMOD_PSK3:\r
detRate = GetPskClock("",FALSE, FALSE); \r
- if (expected[readRate] == detRate) {\r
- config.bitrate = readRate;\r
+ if (expected[readRate] == detRate)\r
return TRUE;\r
- }\r
break;\r
case DEMOD_NRZ:\r
detRate = GetNrzClock("",FALSE, FALSE); \r
- if (expected[readRate] == detRate) {\r
- config.bitrate = readRate;\r
- return TRUE;\r
- }\r
- break;\r
- case DEMOD_BI:\r
- detRate = GetAskClock("",FALSE, FALSE); \r
- if (expected[readRate] == detRate) {\r
- config.bitrate = readRate;\r
+ if (expected[readRate] == detRate)\r
return TRUE;\r
- }\r
break;\r
default:\r
return FALSE;\r
return FALSE;\r
}\r
\r
-bool test(uint8_t mode, uint8_t *offset){\r
+bool test(uint8_t mode, uint8_t *offset, int *fndBitRate){\r
\r
- if ( !DemodBufferLen) return FALSE;\r
+ if ( DemodBufferLen < 64 ) return FALSE;\r
uint8_t si = 0;\r
for (uint8_t idx = 0; idx < 64; idx++){\r
si = idx;\r
if ( PackBits(si, 32, DemodBuffer) == 0x00 ) continue;\r
\r
- uint8_t safer = PackBits(si, 4, DemodBuffer); si += 4; //master key\r
+ uint8_t safer = PackBits(si, 4, DemodBuffer); si += 4; //master key\r
uint8_t resv = PackBits(si, 4, DemodBuffer); si += 4; //was 7 & +=7+3 //should be only 4 bits if extended mode\r
// 2nibble must be zeroed.\r
// moved test to here, since this gets most faults first.\r
if ( resv > 0x00) continue;\r
\r
- uint8_t xtRate = PackBits(si, 3, DemodBuffer); si += 3; //new\r
- uint8_t bitRate = PackBits(si, 3, DemodBuffer); si += 3; //new could check bit rate\r
+ uint8_t xtRate = PackBits(si, 3, DemodBuffer); si += 3; //extended mode part of rate\r
+ int bitRate = PackBits(si, 3, DemodBuffer); si += 3; //bit rate\r
+ if (bitRate > 7) continue;\r
uint8_t extend = PackBits(si, 1, DemodBuffer); si += 1; //bit 15 extended mode\r
- uint8_t modread = PackBits(si, 5, DemodBuffer); si += 5+2+1; //new\r
- //uint8_t pskcr = PackBits(si, 2, DemodBuffer); si += 2+1; //new could check psk cr\r
- uint8_t nml01 = PackBits(si, 1, DemodBuffer); si += 1+5; //bit 24 , 30, 31 could be tested for 0 if not extended mode\r
+ uint8_t modread = PackBits(si, 5, DemodBuffer); si += 5+2+1; \r
+ //uint8_t pskcr = PackBits(si, 2, DemodBuffer); si += 2+1; //could check psk cr\r
+ uint8_t nml01 = PackBits(si, 1, DemodBuffer); si += 1+5; //bit 24, 30, 31 could be tested for 0 if not extended mode\r
uint8_t nml02 = PackBits(si, 2, DemodBuffer); si += 2;\r
\r
//if extended mode\r
}\r
//test modulation\r
if (!testModulation(mode, modread)) continue;\r
-\r
- *offset = idx;\r
if (!testBitRate(bitRate, mode)) continue;\r
+ *fndBitRate = bitRate;\r
+ *offset = idx;\r
return TRUE;\r
}\r
return FALSE;\r
}\r
\r
-void printT55xxBlock(const char *demodStr){\r
+void printT55xxBlock(const char *blockNum){\r
\r
uint8_t i = config.offset;\r
uint8_t endpos = 32 + i;\r
}\r
\r
for (; i < endpos; ++i)\r
- bits[i - config.offset]=DemodBuffer[i];\r
+ bits[i - config.offset] = DemodBuffer[i];\r
\r
blockData = PackBits(0, 32, bits);\r
- PrintAndLog("0x%08X %s [%s]", blockData, sprint_bin(bits,32), demodStr);\r
+ PrintAndLog("%s | %08X | %s", blockNum, blockData, sprint_bin(bits,32));\r
}\r
\r
int special(const char *Cmd) {\r
uint32_t blockData = 0;\r
uint8_t bits[32] = {0x00};\r
\r
- PrintAndLog("[OFFSET] [DATA] [BINARY]");\r
+ PrintAndLog("OFFSET | DATA | BINARY");\r
PrintAndLog("----------------------------------------------------");\r
int i,j = 0;\r
for (; j < 64; ++j){\r
\r
blockData = PackBits(0, 32, bits);\r
\r
- PrintAndLog("[%02d] 0x%08X %s",j , blockData, sprint_bin(bits,32)); \r
+ PrintAndLog("%02d | 0x%08X | %s",j , blockData, sprint_bin(bits,32)); \r
}\r
return 0;\r
}\r
\r
-void printConfiguration( t55xx_conf_block_t b){\r
+int printConfiguration( t55xx_conf_block_t b){\r
PrintAndLog("Modulation : %s", GetSelectedModulationStr(b.modulation) );\r
PrintAndLog("Bit Rate : %s", GetBitRateStr(b.bitrate) );\r
PrintAndLog("Inverted : %s", (b.inverted) ? "Yes" : "No" );\r
PrintAndLog("Offset : %d", b.offset);\r
PrintAndLog("Block0 : 0x%08X", b.block0);\r
PrintAndLog("");\r
+ return 0;\r
}\r
\r
-int CmdT55xxWriteBlock(const char *Cmd)\r
-{\r
+int CmdT55xxWriteBlock(const char *Cmd) {\r
int block = 8; //default to invalid block\r
int data = 0xFFFFFFFF; //default to blank Block \r
int password = 0xFFFFFFFF; //default to blank Block 7\r
\r
char cmdp = param_getchar(Cmd, 0);\r
- if (cmdp == 'h' || cmdp == 'H') {\r
- usage_t55xx_write();\r
- return 0;\r
- }\r
- \r
+ if (cmdp == 'h' || cmdp == 'H') return usage_t55xx_write();\r
+ \r
int res = sscanf(Cmd, "%d %x %x",&block, &data, &password);\r
\r
if ( res < 2 || res > 3) {\r
}\r
\r
UsbCommand c = {CMD_T55XX_WRITE_BLOCK, {data, block, 0}};\r
+ UsbCommand resp;\r
c.d.asBytes[0] = 0x0; \r
\r
PrintAndLog("Writing to block: %d data : 0x%08X", block, data);\r
c.d.asBytes[0] = 0x1; \r
PrintAndLog("pwd : 0x%08X", password);\r
}\r
+ clearCommandBuffer();\r
SendCommand(&c);\r
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){\r
+ PrintAndLog("Error occurred, device did not ACK write operation. (May be due to old firmware)");\r
+ return -1;\r
+ }\r
return 0;\r
}\r
\r
-int CmdT55xxReadTrace(const char *Cmd)\r
-{\r
+int CmdT55xxReadTrace(const char *Cmd) {\r
char cmdp = param_getchar(Cmd, 0);\r
\r
- if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') \r
- return usage_t55xx_trace();\r
+ if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') return usage_t55xx_trace();\r
\r
if (strlen(Cmd)==0)\r
AquireData( TRACE_BLOCK );\r
uint32_t bl0 = PackBits(si, 32, DemodBuffer);\r
uint32_t bl1 = PackBits(si+32, 32, DemodBuffer);\r
\r
- uint32_t acl = PackBits(si, 8, DemodBuffer); si += 8;\r
- uint32_t mfc = PackBits(si, 8, DemodBuffer); si += 8;\r
- uint32_t cid = PackBits(si, 5, DemodBuffer); si += 5;\r
- uint32_t icr = PackBits(si, 3, DemodBuffer); si += 3;\r
- uint32_t year = PackBits(si, 4, DemodBuffer); si += 4;\r
- uint32_t quarter = PackBits(si, 2, DemodBuffer); si += 2;\r
- uint32_t lotid = PackBits(si, 14, DemodBuffer); si += 14;\r
- uint32_t wafer = PackBits(si, 5, DemodBuffer); si += 5;\r
+ uint32_t acl = PackBits(si, 8, DemodBuffer); si += 8;\r
+ uint32_t mfc = PackBits(si, 8, DemodBuffer); si += 8;\r
+ uint32_t cid = PackBits(si, 5, DemodBuffer); si += 5;\r
+ uint32_t icr = PackBits(si, 3, DemodBuffer); si += 3;\r
+ uint32_t year = PackBits(si, 4, DemodBuffer); si += 4;\r
+ uint32_t quarter = PackBits(si, 2, DemodBuffer); si += 2;\r
+ uint32_t lotid = PackBits(si, 14, DemodBuffer); si += 14;\r
+ uint32_t wafer = PackBits(si, 5, DemodBuffer); si += 5;\r
uint32_t dw = PackBits(si, 15, DemodBuffer); \r
\r
+ time_t t = time(NULL);\r
+ struct tm tm = *localtime(&t);\r
+ if ( year > tm.tm_year-110)\r
+ year += 2000;\r
+ else\r
+ year += 2010;\r
+\r
+ if ( acl != 0xE0 ) {\r
+ PrintAndLog("The modulation is most likely wrong since the ACL is not 0xE0. ");\r
+ return 1;\r
+ }\r
+\r
PrintAndLog("");\r
PrintAndLog("-- T55xx Trace Information ----------------------------------");\r
PrintAndLog("-------------------------------------------------------------");\r
PrintAndLog(" CID : 0x%02X (%d) - %s", cid, cid, GetModelStrFromCID(cid));\r
PrintAndLog(" ICR IC Revision : %d",icr );\r
PrintAndLog(" Manufactured");\r
- PrintAndLog(" Year/Quarter : 20?%d/%d",year, quarter);\r
+ PrintAndLog(" Year/Quarter : %d/%d",year, quarter);\r
PrintAndLog(" Lot ID : %d", lotid );\r
PrintAndLog(" Wafer number : %d", wafer);\r
PrintAndLog(" Die Number : %d", dw);\r
PrintAndLog(" Block 1 : 0x%08X %s", bl1, sprint_bin(DemodBuffer+config.offset+repeat+32,32) );\r
PrintAndLog("-------------------------------------------------------------");\r
\r
- if ( acl != 0xE0 )\r
- PrintAndLog("The modulation is most likely wrong since the ACL is not 0xE0. ");\r
/*\r
TRACE - BLOCK O\r
Bits Definition HEX\r
*/\r
char cmdp = param_getchar(Cmd, 0);\r
\r
- if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H')\r
- return usage_t55xx_info();\r
+ if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') return usage_t55xx_info();\r
\r
if (strlen(Cmd)==0)\r
AquireData( CONFIGURATION_BLOCK );\r
- \r
+\r
if (!DecodeT55xxBlock()) return 1;\r
\r
- if ( !DemodBufferLen) return 1;\r
+ if ( DemodBufferLen < 32) return 1;\r
\r
uint8_t si = config.offset;\r
uint32_t bl0 = PackBits(si, 32, DemodBuffer);\r
\r
char s[20] = {0x00};\r
uint8_t pwd[4] = {0x00};\r
-\r
char cmdp = param_getchar(Cmd, 0);\r
- if ( cmdp == 'h' || cmdp == 'H') {\r
- usage_t55xx_dump();\r
- return 0;\r
- }\r
+ if ( cmdp == 'h' || cmdp == 'H') return usage_t55xx_dump();\r
\r
bool hasPwd = ( strlen(Cmd) > 0); \r
if ( hasPwd ){\r
}\r
\r
int AquireData( uint8_t block ){\r
-\r
- UsbCommand c;\r
\r
- if ( block == CONFIGURATION_BLOCK ) \r
- c.cmd = CMD_T55XX_READ_BLOCK;\r
- else if (block == TRACE_BLOCK )\r
- c.cmd = CMD_T55XX_READ_TRACE;\r
- \r
- c.arg[0] = 0x00;\r
- c.arg[1] = 0x00;\r
- c.arg[2] = 0x00;\r
- c.d.asBytes[0] = 0x0; \r
-\r
- //Password mode\r
- // if ( res == 2 ) {\r
- // c.arg[2] = password;\r
- // c.d.asBytes[0] = 0x1; \r
- // }\r
-\r
+ uint32_t password = 0;\r
+ UsbCommand c = {CMD_T55XX_READ_BLOCK, {0, 0, password}};\r
+ \r
+ if ( block == CONFIGURATION_BLOCK ) {\r
+ c.arg[0] = 0x00 | 0x01;\r
+ }\r
+ else if (block == TRACE_BLOCK ) {\r
+ c.arg[0] = 0x02 | 0x01;\r
+ }\r
+ \r
+ clearCommandBuffer();\r
SendCommand(&c);\r
if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {\r
PrintAndLog("command execution time out");\r
}\r
\r
char * GetBitRateStr(uint32_t id){\r
- static char buf[40];\r
+ static char buf[25];\r
+\r
char *retStr = buf;\r
switch (id){\r
case 0: \r
return buf;\r
}\r
\r
-\r
char * GetSaferStr(uint32_t id){\r
static char buf[40];\r
char *retStr = buf;\r
}\r
\r
char * GetModulationStr( uint32_t id){\r
- static char buf[40];\r
+ static char buf[60];\r
char *retStr = buf;\r
\r
switch (id){\r
snprintf(retStr,sizeof(buf),"%d - FSK 2a RF/10 RF/8",id);\r
break;\r
case 8:\r
- snprintf(retStr,sizeof(buf),"%d - Manschester",id);\r
+ snprintf(retStr,sizeof(buf),"%d - Manchester",id);\r
break;\r
case 16:\r
snprintf(retStr,sizeof(buf),"%d - Biphase",id);\r
static char buf[10];\r
char *retStr = buf;\r
\r
- if (cid == 1) sprintf(retStr,"ATA5577M1");\r
- if (cid == 2) sprintf(retStr,"ATA5577M2"); \r
+ if (cid == 1) snprintf(retStr, sizeof(buf),"ATA5577M1");\r
+ if (cid == 2) snprintf(retStr, sizeof(buf),"ATA5577M2"); \r
return buf;\r
}\r
\r
return buf;\r
}\r
\r
+void t55x7_create_config_block( int tagtype ){\r
+ //switch?\r
+ \r
+ \r
+}\r
+\r
+int CmdT55xxWakeUp(const char *Cmd) {\r
+ uint32_t password = 0;\r
+ uint8_t cmdp = 0;\r
+ bool errors = false;\r
+ while(param_getchar(Cmd, cmdp) != 0x00 && !errors) {\r
+ switch(param_getchar(Cmd, cmdp)) {\r
+ case 'h':\r
+ case 'H':\r
+ return usage_t55xx_wakup();\r
+ case 'p':\r
+ case 'P':\r
+ password = param_get32ex(Cmd, cmdp+1, 0xFFFFFFFF, 16);\r
+ cmdp+=2;\r
+ break;\r
+ default:\r
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
+ errors = true;\r
+ break;\r
+ }\r
+ }\r
+ if (errors) return usage_t55xx_wakup();\r
+\r
+ UsbCommand c = {CMD_T55XX_WAKEUP, {password, 0, 0}};\r
+ clearCommandBuffer();\r
+ SendCommand(&c);\r
+ PrintAndLog("Wake up command sent. Try read now");\r
+ return 0;\r
+}\r
+\r
+/*\r
uint32_t PackBits(uint8_t start, uint8_t len, uint8_t* bits){\r
\r
int i = start;\r
\r
return tmp;\r
}\r
-\r
+*/\r
static command_t CommandTable[] =\r
{\r
{"help", CmdHelp, 1, "This help"},\r
{"info", CmdT55xxInfo, 0, "[1] Show T55xx configuration data (page 0/ blk 0)"},\r
{"dump", CmdT55xxDump, 0, "[password] Dump T55xx card block 0-7. [optional password]"},\r
{"special", special, 0, "Show block changes with 64 different offsets"},\r
+ {"wakeup", CmdT55xxWakeUp, 0, "Send AOR wakeup command"},\r
+ \r
{NULL, NULL, 0, NULL}\r
};\r
\r
projects / proxmark3-svn / blobdiff