// own protocol.
//-----------------------------------------------------------------------------
-#ifndef __USB_CMD_H
-#define __USB_CMD_H
+#ifndef USB_CMD_H__
+#define USB_CMD_H__
+
#ifdef _MSC_VER
typedef DWORD uint32_t;
typedef BYTE uint8_t;
#define PACKED
-// stuff
#else
#include <stdint.h>
#include <stdbool.h>
#define USB_CMD_DATA_SIZE 512
+// the packets sent from client to PM3
typedef struct {
- uint64_t cmd;
- uint64_t arg[3];
- union {
- uint8_t asBytes[USB_CMD_DATA_SIZE];
- uint32_t asDwords[USB_CMD_DATA_SIZE/4];
- } d;
+ uint64_t cmd;
+ uint64_t arg[3];
+ union {
+ uint8_t asBytes[USB_CMD_DATA_SIZE];
+ uint32_t asDwords[USB_CMD_DATA_SIZE/4];
+ } d;
} PACKED UsbCommand;
+// the packets sent from PM3 to client (a smaller version of UsbCommand)
+typedef struct {
+ uint16_t cmd;
+ uint16_t datalen;
+ uint32_t arg[3];
+ union {
+ uint8_t asBytes[USB_CMD_DATA_SIZE];
+ uint32_t asDwords[USB_CMD_DATA_SIZE/4];
+ } d;
+} PACKED UsbResponse;
+
+// A struct used to send sample-configs over USB
+typedef struct {
+ uint8_t decimation;
+ uint8_t bits_per_sample;
+ bool averaging;
+ int divisor;
+ int trigger_threshold;
+ int samples_to_skip;
+} sample_config;
+
+
// For the bootloader
#define CMD_DEVICE_INFO 0x0000
#define CMD_SETUP_WRITE 0x0001
#define CMD_BUFF_CLEAR 0x0105
#define CMD_READ_MEM 0x0106
#define CMD_VERSION 0x0107
+#define CMD_STATUS 0x0108
+#define CMD_PING 0x0109
+
+// controlling the ADC input multiplexer
+#define CMD_SET_ADC_MUX 0x020F
+
+// RDV40, Smart card operations
+#define CMD_SMART_RAW 0x0140
+#define CMD_SMART_UPGRADE 0x0141
+#define CMD_SMART_UPLOAD 0x0142
+#define CMD_SMART_ATR 0x0143
+// CMD_SMART_SETBAUD is unused for now
+#define CMD_SMART_SETBAUD 0x0144
+#define CMD_SMART_SETCLOCK 0x0145
// For low-frequency tags
#define CMD_READ_TI_TYPE 0x0202
#define CMD_HID_SIM_TAG 0x020C
#define CMD_SET_LF_DIVISOR 0x020D
#define CMD_LF_SIMULATE_BIDIR 0x020E
-#define CMD_SET_ADC_MUX 0x020F
#define CMD_HID_CLONE_TAG 0x0210
#define CMD_EM410X_WRITE_TAG 0x0211
#define CMD_INDALA_CLONE_TAG 0x0212
#define CMD_INDALA_CLONE_TAG_L 0x0213
#define CMD_T55XX_READ_BLOCK 0x0214
#define CMD_T55XX_WRITE_BLOCK 0x0215
-#define CMD_T55XX_READ_TRACE 0x0216
+#define CMD_T55XX_RESET_READ 0x0216
#define CMD_PCF7931_READ 0x0217
+#define CMD_PCF7931_WRITE 0x0222
+#define CMD_PCF7931_BRUTEFORCE 0x0227
#define CMD_EM4X_READ_WORD 0x0218
#define CMD_EM4X_WRITE_WORD 0x0219
-/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
+#define CMD_IO_DEMOD_FSK 0x021A
+#define CMD_IO_CLONE_TAG 0x021B
+#define CMD_EM410X_DEMOD 0x021c
+// Sampling configuration for LF reader/snooper
+#define CMD_SET_LF_SAMPLING_CONFIG 0x021d
+#define CMD_FSK_SIM_TAG 0x021E
+#define CMD_ASK_SIM_TAG 0x021F
+#define CMD_PSK_SIM_TAG 0x0220
+#define CMD_AWID_DEMOD_FSK 0x0221
+#define CMD_VIKING_CLONE_TAG 0x0223
+#define CMD_T55XX_WAKEUP 0x0224
+#define CMD_COTAG 0x0225
+#define CMD_PARADOX_CLONE_TAG 0x0226
+#define CMD_EM4X_PROTECT 0x0228
// For the 13.56 MHz tags
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
-#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 0x0301
#define CMD_READ_SRI512_TAG 0x0303
#define CMD_READ_SRIX4K_TAG 0x0304
#define CMD_ISO_14443B_COMMAND 0x0305
#define CMD_READER_ISO_15693 0x0310
#define CMD_SIMTAG_ISO_15693 0x0311
-#define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312
+#define CMD_SNOOP_ISO_15693 0x0312
#define CMD_ISO_15693_COMMAND 0x0313
#define CMD_ISO_15693_COMMAND_DONE 0x0314
#define CMD_ISO_15693_FIND_AFI 0x0315
#define CMD_ISO_15693_DEBUG 0x0316
+#define CMD_LF_SNOOP_RAW_ADC_SAMPLES 0x0317
+#define CMD_CSETUID_ISO_15693 0x0318
// For Hitag2 transponders
#define CMD_SNOOP_HITAG 0x0370
#define CMD_SIMULATE_HITAG 0x0371
#define CMD_READER_HITAG 0x0372
+#define CMD_SIMULATE_HITAG_S 0x0368
+#define CMD_TEST_HITAGS_TRACES 0x0367
+#define CMD_READ_HITAG_S 0x0373
+#define CMD_READ_HITAG_S_BLK 0x0374
+#define CMD_WR_HITAG_S 0x0375
+#define CMD_EMU_HITAG_S 0x0376
-#define CMD_SIMULATE_TAG_HF_LISTEN 0x0380
-#define CMD_SIMULATE_TAG_ISO_14443 0x0381
-#define CMD_SNOOP_ISO_14443 0x0382
+#define CMD_SIMULATE_TAG_ISO_14443B 0x0381
+#define CMD_SNOOP_ISO_14443B 0x0382
#define CMD_SNOOP_ISO_14443a 0x0383
#define CMD_SIMULATE_TAG_ISO_14443a 0x0384
#define CMD_READER_ISO_14443a 0x0385
#define CMD_READER_LEGIC_RF 0x0388
#define CMD_WRITER_LEGIC_RF 0x0389
#define CMD_EPA_PACE_COLLECT_NONCE 0x038A
+#define CMD_EPA_PACE_REPLAY 0x038B
+#define CMD_ICLASS_CLONE 0x0390
+#define CMD_ICLASS_DUMP 0x0391
#define CMD_SNOOP_ICLASS 0x0392
#define CMD_SIMULATE_TAG_ICLASS 0x0393
#define CMD_READER_ICLASS 0x0394
+#define CMD_ICLASS_READBLOCK 0x0396
+#define CMD_ICLASS_WRITEBLOCK 0x0397
+#define CMD_ICLASS_EML_MEMSET 0x0398
+#define CMD_ICLASS_CHECK 0x0399
+#define CMD_ICLASS_READCHECK 0x039A
// For measurements of the antenna tuning
#define CMD_MEASURE_ANTENNA_TUNING 0x0400
#define CMD_MIFARE_EML_MEMSET 0x0602
#define CMD_MIFARE_EML_MEMGET 0x0603
#define CMD_MIFARE_EML_CARDLOAD 0x0604
-#define CMD_MIFARE_EML_CSETBLOCK 0x0605
-#define CMD_MIFARE_EML_CGETBLOCK 0x0606
+
+// magic chinese card commands
+#define CMD_MIFARE_CSETBLOCK 0x0605
+#define CMD_MIFARE_CGETBLOCK 0x0606
+#define CMD_MIFARE_CIDENT 0x0607
+#define CMD_MIFARE_CWIPE 0x0608
#define CMD_SIMULATE_MIFARE_CARD 0x0610
#define CMD_READER_MIFARE 0x0611
#define CMD_MIFARE_NESTED 0x0612
+#define CMD_MIFARE_ACQUIRE_ENCRYPTED_NONCES 0x0613
#define CMD_MIFARE_READBL 0x0620
-#define CMD_MIFAREU_READBL 0x0720
#define CMD_MIFARE_READSC 0x0621
-#define CMD_MIFAREU_READCARD 0x0721
#define CMD_MIFARE_WRITEBL 0x0622
-#define CMD_MIFAREU_WRITEBL_COMPAT 0x0722
-#define CMD_MIFAREU_WRITEBL 0x0723
#define CMD_MIFARE_CHKKEYS 0x0623
-
+#define CMD_MIFARE_PERSONALIZE_UID 0x0624
#define CMD_MIFARE_SNIFFER 0x0630
+//ultralightC
+#define CMD_MIFAREU_READBL 0x0720
+#define CMD_MIFAREU_READCARD 0x0721
+#define CMD_MIFAREU_WRITEBL 0x0722
+#define CMD_MIFAREU_WRITEBL_COMPAT 0x0723
+#define CMD_MIFAREUC_AUTH 0x0724
+//0x0725 and 0x0726 no longer used
+#define CMD_MIFAREUC_SETPWD 0x0727
+
+
+// mifare desfire
+#define CMD_MIFARE_DESFIRE_READBL 0x0728
+#define CMD_MIFARE_DESFIRE_WRITEBL 0x0729
+#define CMD_MIFARE_DESFIRE_AUTH1 0x072a
+#define CMD_MIFARE_DESFIRE_AUTH2 0x072b
+#define CMD_MIFARE_DES_READER 0x072c
+#define CMD_MIFARE_DESFIRE_INFO 0x072d
+#define CMD_MIFARE_DESFIRE 0x072e
+
+#define CMD_HF_SNIFFER 0x0800
+#define CMD_HF_PLOT 0x0801
+
+#define CMD_VARIABLE_SIZE_FLAG 0x8000
#define CMD_UNKNOWN 0xFFFF
+
+// Mifare simulation flags
+#define FLAG_INTERACTIVE (1<<0)
+#define FLAG_4B_UID_IN_DATA (1<<1)
+#define FLAG_7B_UID_IN_DATA (1<<2)
+#define FLAG_NR_AR_ATTACK (1<<4)
+#define FLAG_RANDOM_NONCE (1<<5)
+
+
+// iCLASS reader flags
+#define FLAG_ICLASS_READER_INIT (1<<0)
+#define FLAG_ICLASS_READER_CC (1<<1)
+#define FLAG_ICLASS_READER_CSN (1<<2)
+#define FLAG_ICLASS_READER_CONF (1<<3)
+#define FLAG_ICLASS_READER_AA (1<<4)
+#define FLAG_ICLASS_READER_CREDITKEY (1<<5)
+#define FLAG_ICLASS_READER_CLEARTRACE (1<<6)
+
+
+// iCLASS simulation modes
+#define ICLASS_SIM_MODE_CSN 0
+#define ICLASS_SIM_MODE_CSN_DEFAULT 1
+#define ICLASS_SIM_MODE_READER_ATTACK 2
+#define ICLASS_SIM_MODE_FULL 3
+#define ICLASS_SIM_MODE_READER_ATTACK_KEYROLL 4
+#define ICLASS_SIM_MODE_EXIT_AFTER_MAC 5 // note: device internal only
+
+
+// hw tune args
+#define FLAG_TUNE_LF 1
+#define FLAG_TUNE_HF 2
+#define FLAG_TUNE_ALL 3
+
+// Hardware capabilities
+#define HAS_EXTRA_FLASH_MEM (1 << 0)
+#define HAS_SMARTCARD_SLOT (1 << 1)
+
+
// CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
/* Whether a bootloader that understands the common_area is present */
-#define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
+#define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
/* Whether a osimage that understands the common_area is present */
-#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
+#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
/* Set if the bootloader is currently executing */
-#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
+#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
/* Set if the OS is currently executing */
-#define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
+#define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
/* Set if this device understands the extend start flash command */
-#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
+#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
/* CMD_START_FLASH may have three arguments: start of area to flash,
end of area to flash, optional magic.
projects / proxmark3-svn / blobdiff