All notable changes to this project will be documented in this file.
This project uses the changelog in accordance with [keepchangelog](http://keepachangelog.com/). Please use this to write notable changes, which is not the same as git commit log...
-## [Unreleased][unreleased]
+## [unreleased][unreleased]
+
+### Added
+- `lf t55xx bruteforce <start password> <end password> [i <*.dic>]` - Simple bruteforce attack to find password - (iceman and others)
+- `lf viking clone`- clone viking tag to t55x7 or Q5 from 4byte hex ID input
+- `lf viking sim` - sim full viking tag from 4byte hex ID input
+- `lf viking read` - read viking tag and output ID
+- `lf t55xx wipe` - sets t55xx back to factory defaults
+- Added viking demod to `lf search` (marshmellow)
+- `data askvikingdemod` demod viking id tag from graphbuffer (marshmellow)
+- `lf t55xx resetread` added reset then read command - should allow determining start
+of stream transmissions (marshmellow)
+- `lf t55xx wakeup` added wake with password (AOR) to allow lf search or standard lf read after (iceman, marshmellow)
+- `hf iclass managekeys` to save, load and manage iclass keys. (adjusted most commands to accept a loaded key in memory) (marshmellow)
+- `hf iclass readblk` to select, authenticate, and read 1 block from an iclass card (marshmellow)
+- `hf iclass writeblk` to select, authenticate, and write 1 block to an iclass card (or picopass) (marshmellow + others)
+- `hf iclass clone` to take a saved dump file and clone selected blocks to a new tag (marshmellow + others)
+- `hf iclass calcnewkey` - to calculate the div_key change to change a key - (experimental) (marshmellow + others)
+- `hf iclass encryptblk` - to encrypt a data block hex to prep for writing that block (marshmellow)
+- ISO14443a stand-alone operation with ARM CFLAG="WITH_ISO14443a_StandAlone". This code can read & emulate two banks of 14a tag UIDs and write to "magic" cards (Craig Young)
+- AWID26 command context added as 'lf awid' containing realtime demodulation as well as cloning/simulation based on tag numbers (Craig Young)
+- Added 'hw status'. This command makes the ARM print out some runtime information. (holiman)
+- Added 'hw ping'. This command just sends a usb packets and checks if the pm3 is responsive. Can be used to abort certain operations which supports abort over usb. (holiman)
+- Added `data hex2bin` and `data bin2hex` for command line conversion between binary and hexadecimal (holiman)
+- Added 'hf snoop'. This command take digitalized signal from FPGA and put in BigBuffer. (pwpiwi + enio)
+- Added Topaz (NFC type 1) protocol support ('hf topaz reader', 'hf list topaz', 'hf 14a raw -T', 'hf topaz snoop'). (piwi)
+- Added option c to 'hf list' (mark CRC bytes) (piwi)
+
+### Changed
+- Added `[l] <length>` option to data printdemodbuffer
+- Adjusted lf awid clone to optionally clone to Q5 tags
+- Adjusted lf t55xx detect to find Q5 tags (t5555) instead of just t55x7
+- Adjusted all lf NRZ demods - works more acurately and consistantly (as long as you have strong signal)
+- Adjusted lf pskindalademod to reduce false positive reads.
+- Small adjustments to psk, nrz, and ask clock detect routines - more reliable.
+- Adjusted lf em410x em410xsim to accept a clock argument
+- Adjusted lf t55xx dump to allow overriding the safety check and warning text (marshmellow)
+- Adjusted lf t55xx write input variables (marshmellow)
+- Adjusted lf t55xx read with password safety check and warning text and adjusted the input variables (marshmellow & iceman)
+- Adjusted LF FSK demod to account for cross threshold fluctuations (898 count waves will adjust the 9 to 8 now...) more accurate.
+- Adjusted timings for t55xx commands. more reliable now. (marshmellow & iceman)
+- `lf cmdread` adjusted input methods and added help text (marshmellow & iceman)
+- changed `lf config t <threshold>` to be 0 - 128 and will trigger on + or - threshold value (marshmellow)
+- `hf iclass dump` cli options - can now dump AA1 and AA2 with different keys in one run (does not go to muliple pages for the larger tags yet)
+- Revised workflow for StandAloneMode14a (Craig Young)
+- EPA functions (`hf epa`) now support both ISO 14443-A and 14443-B cards (frederikmoellers)
+- 'hw version' only talks to ARM at startup, after that the info is cached. (pwpiwi)
+- Added `r` option to iclass functions - allows key to be provided in raw block 3/4 format
+
+## [2.2.0][2015-07-12]
+
+### Changed
+- Added `hf 14b raw -s` option to auto select a 14b std tag before raw command
+- Changed `hf 14b write` to `hf 14b sriwrite` as it only applied to sri tags (marshmellow)
+- Added `hf 14b info` to `hf search` (marshmellow)
+- Added compression of fpga config and data, *BOOTROM REFLASH REQUIRED* (piwi)
+- Implemented better detection of mifare-tags that are not vulnerable to classic attacks (`hf mf mifare`, `hf mf nested`) (piwi)
+
+### Added
+- Add `hf 14b info` to find and print info about std 14b tags and sri tags (using 14b raw commands in the client) (marshmellow)
+- Add PACE replay functionality (frederikmoellers)
+
+### Fixed
+- t55xx write timing (marshmellow)
+
+
+## [2.1.0][2015-06-23]
+
### Changed
+- Added ultralight/ntag tag type detection to `hf 14a read` (marshmellow)
+- Improved ultralight dump command to auto detect tag type, take authentication, and dump full memory (or subset specified) of known tag types (iceman1001 / marshmellow)
+- Combined ultralight read/write commands and added authentication (iceman1001)
- Improved LF manchester and biphase demodulation and ask clock detection especially for reads with heavy clipping. (marshmellow)
- Iclass read, `hf iclass read` now also reads tag config and prints configuration. (holiman)
- *bootrom* needs to be flashed, due to new address boundaries between os and fpga, after a size optimization (piwi)
### Fixed
- Fixed EM4x50 read/demod of the tags broadcasted memory blocks. 'lf em4x em4x50read' (not page read) (marshmellow)
- Fixed issue #19, problems with LF T55xx commands (iceman1001, marshmellow)
+- Fixed various problems with iso14443b, issue #103 (piwi, marshmellow)
### Added
+- Added `hf search` - currently tests for 14443a tags, iclass tags, and 15693 tags (marshmellow)
+- Added `hf mfu info` Ultralight/NTAG info command - reads tag configuration and info, allows authentication if needed (iceman1001, marshmellow)
+- Added Mifare Ultralight C and Ultralight EV1/NTAG authentication. (iceman1001)
- Added changelog
## [2.0.0] - 2015-03-25
projects / proxmark3-svn / blobdiff