]> cvs.zerfleddert.de Git - proxmark3-svn/blobdiff - armsrc/lfops.c
fix gui (plot) bugs (#604)
[proxmark3-svn] / armsrc / lfops.c
index 641c02e876edf278f611138fd1ec7d3043729e89..f3bbbf84e19f6f2527ba787a497e70437fda213e 100644 (file)
@@ -4,7 +4,7 @@
 // the license.
 //-----------------------------------------------------------------------------
 // Miscellaneous routines for low frequency tag operations.
-// Tags supported here so far are Texas Instruments (TI), HID
+// Tags supported here so far are Texas Instruments (TI), HID, EM4x05, EM410x
 // Also routines for raw mode reading/simulating of LF waveform
 //-----------------------------------------------------------------------------
 
  */
 void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint32_t period_1, uint8_t *command)
 {
+       // start timer
+       StartTicks();
 
-       int divisor_used = 95; // 125 KHz
-       // see if 'h' was specified
-
-       if (command[strlen((char *) command) - 1] == 'h')
-               divisor_used = 88; // 134.8 KHz
-
-       sample_config sc = { 0,0,1, divisor_used, 0};
-       setSamplingConfig(&sc);
-       //clear read buffer
-       BigBuf_Clear_keep_EM();
+       // use lf config settings
+       sample_config *sc = getSamplingConfig();
 
-       /* Make sure the tag is reset */
+       // Make sure the tag is reset
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-       SpinDelay(2500);
+       WaitMS(2500);
+
+       // clear read buffer (after fpga bitstream loaded...)
+       BigBuf_Clear_keep_EM();
 
-       LFSetupFPGAForADC(sc.divisor, 1);
+       // power on
+       LFSetupFPGAForADC(sc->divisor, 1);
 
        // And a little more time for the tag to fully power up
-       SpinDelay(2000);
-
+       WaitMS(2000);
+       // if delay_off = 0 then just bitbang 1 = antenna on 0 = off for respective periods.
+       bool bitbang = delay_off == 0;
        // now modulate the reader field
-       while(*command != '\0' && *command != ' ') {
+
+       if (bitbang) {
+               // HACK it appears the loop and if statements take up about 7us so adjust waits accordingly...
+               uint8_t hack_cnt = 7;
+               if (period_0 < hack_cnt || period_1 < hack_cnt) {
+                       DbpString("Warning periods cannot be less than 7us in bit bang mode");
+                       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+                       LED_D_OFF();
+                       return;
+               }
+
+               // hack2 needed---  it appears to take about 8-16us to turn the antenna back on 
+               // leading to ~ 1 to 2 125khz samples extra in every off period 
+               // so we should test for last 0 before next 1 and reduce period_0 by this extra amount...
+               // but is this time different for every antenna or other hw builds???  more testing needed
+
+               // prime cmd_len to save time comparing strings while modulating
+               int cmd_len = 0;
+               while(command[cmd_len] != '\0' && command[cmd_len] != ' ')
+                       cmd_len++;
+
+               int counter = 0;
+               bool off = false;
+               for (counter = 0; counter < cmd_len; counter++) {
+                       // if cmd = 0 then turn field off
+                       if (command[counter] == '0') {
+                               // if field already off leave alone (affects timing otherwise)
+                               if (off == false) {
+                                       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+                                       LED_D_OFF();
+                                       off = true;
+                               }
+                               // note we appear to take about 7us to switch over (or run the if statements/loop...)
+                               WaitUS(period_0-hack_cnt);
+                       // else if cmd = 1 then turn field on
+                       } else {
+                               // if field already on leave alone (affects timing otherwise)
+                               if (off) {
+                                       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+                                       LED_D_ON();
+                                       off = false;
+                               }
+                               // note we appear to take about 7us to switch over (or run the if statements/loop...)
+                               WaitUS(period_1-hack_cnt);
+                       }
+               }
+       } else { // old mode of cmd read using delay as off period
+               while(*command != '\0' && *command != ' ') {
+                       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+                       LED_D_OFF();
+                       WaitUS(delay_off);
+                       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc->divisor);
+                       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+                       LED_D_ON();
+                       if(*(command++) == '0') {
+                               WaitUS(period_0);
+                       } else {
+                               WaitUS(period_1);
+                       }
+               }
                FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
                LED_D_OFF();
-               SpinDelayUs(delay_off);
-               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
-
-               FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-               LED_D_ON();
-               if(*(command++) == '0')
-                       SpinDelayUs(period_0);
-               else
-                       SpinDelayUs(period_1);
+               WaitUS(delay_off);
+               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc->divisor);
        }
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-       LED_D_OFF();
-       SpinDelayUs(delay_off);
-       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
 
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 
        // now do the read
        DoAcquisition_config(false, 0);
+
+       // Turn off antenna
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+       // tell client we are done
+       cmd_send(CMD_ACK,0,0,0,0,0);
 }
 
 /* blank r/w tag data stream
@@ -1159,7 +1211,7 @@ void T55xxResetRead(void) {
        TurnReadLFOn(READ_GAP);
 
        // Acquisition
-       DoPartialAcquisition(0, true, BigBuf_max_traceLen());
+       DoPartialAcquisition(0, true, BigBuf_max_traceLen(), 0);
 
        // Turn the field off
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
@@ -1291,7 +1343,7 @@ void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
 
        // Acquisition
        // Now do the acquisition
-       DoPartialAcquisition(0, true, 12000);
+       DoPartialAcquisition(0, true, 12000, 0);
 
        // Turn the field off
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
@@ -1690,7 +1742,7 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
        SendForward(fwd_bit_count);
        WaitUS(400);
        // Now do the acquisition
-       DoPartialAcquisition(20, true, 6000);
+       DoPartialAcquisition(20, true, 6000, 1000);
        
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        LED_A_OFF();
@@ -1723,7 +1775,7 @@ void EM4xWriteWord(uint32_t flag, uint32_t Data, uint32_t Pwd) {
 
        WaitUS(6500);
        //Capture response if one exists
-       DoPartialAcquisition(20, true, 6000);
+       DoPartialAcquisition(20, true, 6000, 1000);
 
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        LED_A_OFF();
Impressum, Datenschutz