#include "LCD.h"\r
#endif\r
\r
+#define va_list __builtin_va_list\r
+#define va_start __builtin_va_start\r
+#define va_arg __builtin_va_arg\r
+#define va_end __builtin_va_end\r
+int kvsprintf(char const *fmt, void *arg, int radix, va_list ap);\r
+ \r
//=============================================================================\r
// A buffer where we can queue things up to be sent through the FPGA, for\r
// any purpose (fake tag, as reader, whatever). We go MSB first, since that\r
\r
UsbCommand c;\r
c.cmd = CMD_DEBUG_PRINT_STRING;\r
- c.ext1 = strlen(str);\r
- memcpy(c.d.asBytes, str, c.ext1);\r
+ c.arg[0] = strlen(str);\r
+ memcpy(c.d.asBytes, str, c.arg[0]);\r
\r
UsbSendPacket((BYTE *)&c, sizeof(c));\r
// TODO fix USB so stupid things like this aren't req'd\r
SpinDelay(50);\r
}\r
\r
+#if 0\r
void DbpIntegers(int x1, int x2, int x3)\r
{\r
/* this holds up stuff unless we're connected to usb */\r
\r
UsbCommand c;\r
c.cmd = CMD_DEBUG_PRINT_INTEGERS;\r
- c.ext1 = x1;\r
- c.ext2 = x2;\r
- c.ext3 = x3;\r
+ c.arg[0] = x1;\r
+ c.arg[1] = x2;\r
+ c.arg[2] = x3;\r
\r
UsbSendPacket((BYTE *)&c, sizeof(c));\r
// XXX\r
SpinDelay(50);\r
}\r
+#endif\r
+\r
+void Dbprintf(const char *fmt, ...) {\r
+// should probably limit size here; oh well, let's just use a big buffer\r
+ char output_string[128];\r
+ va_list ap;\r
+\r
+ va_start(ap, fmt);\r
+ kvsprintf(fmt, output_string, 10, ap);\r
+ va_end(ap);\r
+ \r
+ DbpString(output_string);\r
+}\r
\r
//-----------------------------------------------------------------------------\r
// Read an ADC channel and block till it completes, then return the result\r
vHf = (33000 * AvgAdc(ADC_CHAN_HF)) >> 10;\r
\r
c.cmd = CMD_MEASURED_ANTENNA_TUNING;\r
- c.ext1 = (vLf125 << 0) | (vLf134 << 16);\r
- c.ext2 = vHf;\r
- c.ext3 = peakf | (peakv << 16);\r
+ c.arg[0] = (vLf125 << 0) | (vLf134 << 16);\r
+ c.arg[1] = vHf;\r
+ c.arg[2] = peakf | (peakv << 16);\r
UsbSendPacket((BYTE *)&c, sizeof(c));\r
}\r
\r
void ReadMem(int addr)\r
{\r
const DWORD *data = ((DWORD *)addr);\r
- int i;\r
\r
- DbpString("Reading memory at address");\r
- DbpIntegers(0, 0, addr);\r
- for (i = 0; i < 8; i+= 2)\r
- DbpIntegers(0, data[i], data[i+1]);\r
+ Dbprintf("Reading memory at address %x: %02x %02x %02x %02x %02x %02x %02x %02x",\r
+ addr, data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7]);\r
}\r
\r
/* osimage version information is linked in */\r
DbpString(temp);\r
}\r
\r
+#ifdef WITH_LF\r
// samy's sniff and repeat routine\r
void SamyRun()\r
{\r
SpinDelay(500);\r
\r
CmdHIDdemodFSK(1, &high[selected], &low[selected], 0);\r
- DbpString("Recorded");\r
- DbpIntegers(selected, high[selected], low[selected]);\r
+ Dbprintf("Recorded %x %x %x", selected, high[selected], low[selected]);\r
\r
LEDsoff();\r
LED(selected + 1, 0);\r
// wait for button to be released\r
while(BUTTON_PRESS())\r
WDT_HIT();\r
- DbpIntegers(selected, high[selected], low[selected]);\r
+ Dbprintf("%x %x %x", selected, high[selected], low[selected]);\r
CmdHIDsimTAG(high[selected], low[selected], 0);\r
DbpString("Done playing");\r
if (BUTTON_HELD(1000) > 0)\r
}\r
}\r
}\r
-\r
+#endif\r
\r
/*\r
OBJECTIVE\r
lf_av=lf_max=ReadAdc(ADC_CHAN_LF);\r
\r
if(limit != HF_ONLY) {\r
- DbpString("LF 125/134 Baseline:");\r
- DbpIntegers(lf_av,0,0);\r
- lf_baseline= lf_av;\r
+ Dbprintf("LF 125/134 Baseline: %d", lf_av);\r
+ lf_baseline = lf_av;\r
}\r
\r
hf_av=hf_max=ReadAdc(ADC_CHAN_HF);\r
\r
if (limit != LF_ONLY) {\r
- DbpString("HF 13.56 Baseline:");\r
- DbpIntegers(hf_av,0,0);\r
- hf_baseline= hf_av;\r
+ Dbprintf("HF 13.56 Baseline: %d", hf_av);\r
+ hf_baseline = hf_av;\r
}\r
\r
for(;;) {\r
lf_av_new= ReadAdc(ADC_CHAN_LF);\r
// see if there's a significant change\r
if(abs(lf_av - lf_av_new) > 10) {\r
- DbpString("LF 125/134 Field Change:");\r
- DbpIntegers(lf_av,lf_av_new,lf_count);\r
- lf_av= lf_av_new;\r
+ Dbprintf("LF 125/134 Field Change: %x %x %x", lf_av, lf_av_new, lf_count);\r
+ lf_av = lf_av_new;\r
if (lf_av > lf_max)\r
lf_max = lf_av;\r
lf_count= 0;\r
hf_av_new= ReadAdc(ADC_CHAN_HF);\r
// see if there's a significant change\r
if(abs(hf_av - hf_av_new) > 10) {\r
- DbpString("HF 13.56 Field Change:");\r
- DbpIntegers(hf_av,hf_av_new,hf_count);\r
- hf_av= hf_av_new;\r
+ Dbprintf("HF 13.56 Field Change: %x %x %x", hf_av, hf_av_new, hf_count);\r
+ hf_av = hf_av_new;\r
if (hf_av > hf_max)\r
hf_max = hf_av;\r
hf_count= 0;\r
UsbCommand *c = (UsbCommand *)packet;\r
\r
switch(c->cmd) {\r
+#ifdef WITH_LF\r
case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:\r
- AcquireRawAdcSamples125k(c->ext1);\r
+ AcquireRawAdcSamples125k(c->arg[0]);\r
break;\r
+#endif\r
\r
+#ifdef WITH_LF\r
case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K:\r
- ModThenAcquireRawAdcSamples125k(c->ext1,c->ext2,c->ext3,c->d.asBytes);\r
+ ModThenAcquireRawAdcSamples125k(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);\r
break;\r
+#endif\r
\r
+#ifdef WITH_ISO15693\r
case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693:\r
AcquireRawAdcSamplesIso15693();\r
break;\r
+#endif\r
\r
case CMD_BUFF_CLEAR:\r
BufferClear();\r
break;\r
\r
+#ifdef WITH_ISO15693\r
case CMD_READER_ISO_15693:\r
- ReaderIso15693(c->ext1);\r
+ ReaderIso15693(c->arg[0]);\r
+ break;\r
+#endif\r
+\r
+ case CMD_READER_LEGIC_RF:\r
+ LegicRfReader();\r
break;\r
\r
+#ifdef WITH_ISO15693\r
case CMD_SIMTAG_ISO_15693:\r
- SimTagIso15693(c->ext1);\r
+ SimTagIso15693(c->arg[0]);\r
break;\r
+#endif\r
\r
+#ifdef WITH_ISO14443b\r
case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443:\r
- AcquireRawAdcSamplesIso14443(c->ext1);\r
+ AcquireRawAdcSamplesIso14443(c->arg[0]);\r
break;\r
+#endif\r
\r
+#ifdef WITH_ISO14443b\r
case CMD_READ_SRI512_TAG:\r
- ReadSRI512Iso14443(c->ext1);\r
+ ReadSRI512Iso14443(c->arg[0]);\r
break;\r
+ case CMD_READ_SRIX4K_TAG:\r
+ ReadSRIX4KIso14443(c->arg[0]);\r
+ break;\r
+#endif\r
\r
+#ifdef WITH_ISO14443a\r
case CMD_READER_ISO_14443a:\r
- ReaderIso14443a(c->ext1);\r
+ ReaderIso14443a(c->arg[0]);\r
break;\r
+#endif\r
\r
+#ifdef WITH_ISO14443a\r
+ case CMD_READER_MIFARE:\r
+ ReaderMifare(c->arg[0]);\r
+ break;\r
+#endif\r
+ \r
+#ifdef WITH_ISO14443b\r
case CMD_SNOOP_ISO_14443:\r
SnoopIso14443();\r
break;\r
+#endif\r
\r
+#ifdef WITH_ISO14443a\r
case CMD_SNOOP_ISO_14443a:\r
SnoopIso14443a();\r
break;\r
+#endif\r
\r
case CMD_SIMULATE_TAG_HF_LISTEN:\r
SimulateTagHfListen();\r
break;\r
\r
+#ifdef WITH_ISO14443b\r
case CMD_SIMULATE_TAG_ISO_14443:\r
SimulateIso14443Tag();\r
break;\r
+#endif\r
\r
+#ifdef WITH_ISO14443a\r
case CMD_SIMULATE_TAG_ISO_14443a:\r
- SimulateIso14443aTag(c->ext1, c->ext2); // ## Simulate iso14443a tag - pass tag type & UID\r
- break;\r
-\r
- case CMD_SIMULATE_TAG_LEGIC_RF:\r
- LegicRfSimulate();\r
+ SimulateIso14443aTag(c->arg[0], c->arg[1]); // ## Simulate iso14443a tag - pass tag type & UID\r
break;\r
+#endif\r
\r
case CMD_MEASURE_ANTENNA_TUNING:\r
MeasureAntennaTuning();\r
break;\r
\r
case CMD_LISTEN_READER_FIELD:\r
- ListenReaderField(c->ext1);\r
+ ListenReaderField(c->arg[0]);\r
break;\r
\r
+#ifdef WITH_LF\r
case CMD_HID_DEMOD_FSK:\r
CmdHIDdemodFSK(0, 0, 0, 1); // Demodulate HID tag\r
break;\r
+#endif\r
\r
+#ifdef WITH_LF\r
case CMD_HID_SIM_TAG:\r
- CmdHIDsimTAG(c->ext1, c->ext2, 1); // Simulate HID tag by ID\r
+ CmdHIDsimTAG(c->arg[0], c->arg[1], 1); // Simulate HID tag by ID\r
break;\r
+#endif\r
\r
case CMD_FPGA_MAJOR_MODE_OFF: // ## FPGA Control\r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
LED_D_OFF(); // LED D indicates field ON or OFF\r
break;\r
\r
+#ifdef WITH_LF\r
case CMD_READ_TI_TYPE:\r
ReadTItag();\r
break;\r
+#endif\r
\r
+#ifdef WITH_LF\r
case CMD_WRITE_TI_TYPE:\r
- WriteTItag(c->ext1,c->ext2,c->ext3);\r
+ WriteTItag(c->arg[0],c->arg[1],c->arg[2]);\r
break;\r
+#endif\r
\r
case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K: {\r
UsbCommand n;\r
} else {\r
n.cmd = CMD_DOWNLOADED_RAW_BITS_TI_TYPE;\r
}\r
- n.ext1 = c->ext1;\r
- memcpy(n.d.asDwords, BigBuf+c->ext1, 12*sizeof(DWORD));\r
+ n.arg[0] = c->arg[0];\r
+ memcpy(n.d.asDwords, BigBuf+c->arg[0], 12*sizeof(DWORD));\r
UsbSendPacket((BYTE *)&n, sizeof(n));\r
break;\r
}\r
+\r
case CMD_DOWNLOADED_SIM_SAMPLES_125K: {\r
BYTE *b = (BYTE *)BigBuf;\r
- memcpy(b+c->ext1, c->d.asBytes, 48);\r
+ memcpy(b+c->arg[0], c->d.asBytes, 48);\r
break;\r
}\r
+\r
+#ifdef WITH_LF\r
case CMD_SIMULATE_TAG_125K:\r
LED_A_ON();\r
- SimulateTagLowFrequency(c->ext1, 1);\r
+ SimulateTagLowFrequency(c->arg[0], 1);\r
LED_A_OFF();\r
break;\r
+#endif\r
+\r
case CMD_READ_MEM:\r
- ReadMem(c->ext1);\r
+ ReadMem(c->arg[0]);\r
break;\r
+\r
case CMD_SET_LF_DIVISOR:\r
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->ext1);\r
+ FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->arg[0]);\r
break;\r
+\r
case CMD_SET_ADC_MUX:\r
- switch(c->ext1) {\r
- case 0: SetAdcMuxFor(GPIO_MUXSEL_LOPKD); break;\r
- case 1: SetAdcMuxFor(GPIO_MUXSEL_LORAW); break;\r
- case 2: SetAdcMuxFor(GPIO_MUXSEL_HIPKD); break;\r
- case 3: SetAdcMuxFor(GPIO_MUXSEL_HIRAW); break;\r
+ switch(c->arg[0]) {\r
+ case 0: SetAdcMuxFor(GPIO_MUXSEL_LOPKD); break;\r
+ case 1: SetAdcMuxFor(GPIO_MUXSEL_LORAW); break;\r
+ case 2: SetAdcMuxFor(GPIO_MUXSEL_HIPKD); break;\r
+ case 3: SetAdcMuxFor(GPIO_MUXSEL_HIRAW); break;\r
}\r
break;\r
+\r
case CMD_VERSION:\r
SendVersion();\r
break;\r
+\r
+#ifdef WITH_LF\r
case CMD_LF_SIMULATE_BIDIR:\r
- SimulateTagLowFrequencyBidir(c->ext1, c->ext2);\r
+ SimulateTagLowFrequencyBidir(c->arg[0], c->arg[1]);\r
break;\r
+#endif\r
+\r
#ifdef WITH_LCD\r
case CMD_LCD_RESET:\r
LCDReset();\r
break;\r
case CMD_LCD:\r
- LCDSend(c->ext1);\r
+ LCDSend(c->arg[0]);\r
break;\r
#endif\r
case CMD_SETUP_WRITE:\r
// We're going to reset, and the bootrom will take control.\r
}\r
break;\r
+\r
case CMD_START_FLASH:\r
if(common_area.flags.bootrom_present) {\r
common_area.command = COMMON_AREA_COMMAND_ENTER_FLASH_MODE;\r
case CMD_DEVICE_INFO: {\r
UsbCommand c;\r
c.cmd = CMD_DEVICE_INFO;\r
- c.ext1 = DEVICE_INFO_FLAG_OSIMAGE_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_OS;\r
- if(common_area.flags.bootrom_present) c.ext1 |= DEVICE_INFO_FLAG_BOOTROM_PRESENT;\r
+ c.arg[0] = DEVICE_INFO_FLAG_OSIMAGE_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_OS;\r
+ if(common_area.flags.bootrom_present) c.arg[0] |= DEVICE_INFO_FLAG_BOOTROM_PRESENT;\r
UsbSendPacket((BYTE*)&c, sizeof(c));\r
}\r
break;\r
UsbPoll(FALSE);\r
WDT_HIT();\r
\r
+#ifdef WITH_LF\r
if (BUTTON_HELD(1000) > 0)\r
SamyRun();\r
+#endif\r
}\r
}\r