replace msleep() by thread signalling in comms.c

[proxmark3-svn] / armsrc / appmain.c

diff --git a/armsrc/appmain.c b/armsrc/appmain.c
index cdc784c089fa2f6e13d684cb3e03d68438e9bdd0..4f0a19b9282da939760e155eff77bfea880d0487 100644 (file)
--- a/armsrc/appmain.c
+++ b/armsrc/appmain.c
@@ -13,7 +13,6 @@
 #include <stdarg.h>
 
 #include "usb_cdc.h"
 #include <stdarg.h>
 
 #include "usb_cdc.h"

-#include "cmd.h"

 #include "proxmark3.h"
 #include "apps.h"
 #include "fpga.h"
 #include "proxmark3.h"
 #include "apps.h"
 #include "fpga.h"


@@ -24,21 +23,27 @@
 #include "legicrfsim.h"
 #include "hitag2.h"
 #include "hitagS.h"
 #include "legicrfsim.h"
 #include "hitag2.h"
 #include "hitagS.h"

+#include "iclass.h"
+#include "iso14443b.h"

 #include "iso15693.h"
 #include "lfsampling.h"
 #include "BigBuf.h"
 #include "iso15693.h"
 #include "lfsampling.h"
 #include "BigBuf.h"

+#include "mifarecmd.h"

 #include "mifareutil.h"
 #include "mifareutil.h"

+#include "mifaresim.h"

 #include "pcf7931.h"
 #include "i2c.h"
 #include "pcf7931.h"
 #include "i2c.h"

+#include "hfsnoop.h"
+#include "fpgaloader.h"

 #ifdef WITH_LCD
 #ifdef WITH_LCD

- #include "LCD.h"
+       #include "LCD.h"

 #endif
 
 static uint32_t hw_capabilities;
 
 // Craig Young - 14a stand-alone code
 #ifdef WITH_ISO14443a
 #endif
 
 static uint32_t hw_capabilities;
 
 // Craig Young - 14a stand-alone code
 #ifdef WITH_ISO14443a

- #include "iso14443a.h"
+       #include "iso14443a.h"

 #endif
 
 //=============================================================================
 #endif
 
 //=============================================================================


@@ -47,33 +52,31 @@ static uint32_t hw_capabilities;
 // is the order in which they go out on the wire.
 //=============================================================================
 
 // is the order in which they go out on the wire.
 //=============================================================================
 

-#define TOSEND_BUFFER_SIZE (9*MAX_FRAME_SIZE + 1 + 1 + 2)  // 8 data bits and 1 parity bit per payload byte, 1 correction bit, 1 SOC bit, 2 EOC bits 
+#define TOSEND_BUFFER_SIZE (9*MAX_FRAME_SIZE + 1 + 1 + 2)  // 8 data bits and 1 parity bit per payload byte, 1 correction bit, 1 SOC bit, 2 EOC bits

 uint8_t ToSend[TOSEND_BUFFER_SIZE];
 int ToSendMax;
 static int ToSendBit;
 struct common_area common_area __attribute__((section(".commonarea")));
 
 uint8_t ToSend[TOSEND_BUFFER_SIZE];
 int ToSendMax;
 static int ToSendBit;
 struct common_area common_area __attribute__((section(".commonarea")));
 

-void ToSendReset(void)
-{
+void ToSendReset(void) {

        ToSendMax = -1;
        ToSendBit = 8;
 }
 
        ToSendMax = -1;
        ToSendBit = 8;
 }
 

-void ToSendStuffBit(int b)
-{
-       if(ToSendBit >= 8) {
+void ToSendStuffBit(int b) {
+       if (ToSendBit >= 8) {

                ToSendMax++;
                ToSend[ToSendMax] = 0;
                ToSendBit = 0;
        }
 
                ToSendMax++;
                ToSend[ToSendMax] = 0;
                ToSendBit = 0;
        }
 

-       if(b) {
+       if (b) {

                ToSend[ToSendMax] |= (1 << (7 - ToSendBit));
        }
 
        ToSendBit++;
 
                ToSend[ToSendMax] |= (1 << (7 - ToSendBit));
        }
 
        ToSendBit++;
 

-       if(ToSendMax >= sizeof(ToSend)) {
+       if (ToSendMax >= sizeof(ToSend)) {

                ToSendBit = 0;
                DbpString("ToSendStuffBit overflowed!");
        }
                ToSendBit = 0;
                DbpString("ToSendStuffBit overflowed!");
        }


@@ -83,19 +86,11 @@ void ToSendStuffBit(int b)
 // Debug print functions, to go out over USB, to the usual PC-side client.
 //=============================================================================
 
 // Debug print functions, to go out over USB, to the usual PC-side client.
 //=============================================================================
 

-void DbpString(char *str)
-{
-  byte_t len = strlen(str);
-  cmd_send(CMD_DEBUG_PRINT_STRING,len,0,0,(byte_t*)str,len);
+void DbpString(char *str) {
+       uint8_t len = strlen(str);
+       cmd_send(CMD_DEBUG_PRINT_STRING,len,0,0,(uint8_t*)str,len);

 }
 
 }
 

-#if 0
-void DbpIntegers(int x1, int x2, int x3)
-{
-  cmd_send(CMD_DEBUG_PRINT_INTEGERS,x1,x2,x3,0,0);
-}
-#endif
-

 void Dbprintf(const char *fmt, ...) {
 // should probably limit size here; oh well, let's just use a big buffer
        char output_string[128];
 void Dbprintf(const char *fmt, ...) {
 // should probably limit size here; oh well, let's just use a big buffer
        char output_string[128];


@@ -112,26 +107,26 @@ void Dbprintf(const char *fmt, ...) {
 void Dbhexdump(int len, uint8_t *d, bool bAsci) {
        int l=0,i;
        char ascii[9];
 void Dbhexdump(int len, uint8_t *d, bool bAsci) {
        int l=0,i;
        char ascii[9];

-    
+

        while (len>0) {
                if (len>8) l=8;
                else l=len;
        while (len>0) {
                if (len>8) l=8;
                else l=len;

-               
+

                memcpy(ascii,d,l);
                ascii[l]=0;
                memcpy(ascii,d,l);
                ascii[l]=0;

-               
+

                // filter safe ascii
                // filter safe ascii

-               for (i=0;i<l;i++)
-                       if (ascii[i]<32 || ascii[i]>126) ascii[i]='.';
-        
+               for (i = 0; i < l; i++)
+                       if (ascii[i]<32 || ascii[i]>126) ascii[i] = '.';
+

                if (bAsci) {
                if (bAsci) {

-                       Dbprintf("%-8s %*D",ascii,l,d," ");
+                       Dbprintf("%-8s %*D",ascii, l, d, " ");

                } else {
                } else {

-                       Dbprintf("%*D",l,d," ");
+                       Dbprintf("%*D", l, d, " ");

                }
                }

-        
-               len-=8;
-               d+=8;           
+
+               len -= 8;
+               d += 8;

        }
 }
 
        }
 }
 


@@ -140,12 +135,11 @@ void Dbhexdump(int len, uint8_t *d, bool bAsci) {
 // in ADC units (0 to 1023). Also a routine to average 32 samples and
 // return that.
 //-----------------------------------------------------------------------------
 // in ADC units (0 to 1023). Also a routine to average 32 samples and
 // return that.
 //-----------------------------------------------------------------------------

-static int ReadAdc(int ch)
-{      
-       // Note: ADC_MODE_PRESCALE and ADC_MODE_SAMPLE_HOLD_TIME are set to the maximum allowed value. 
+static int ReadAdc(int ch) {
+       // Note: ADC_MODE_PRESCALE and ADC_MODE_SAMPLE_HOLD_TIME are set to the maximum allowed value.

        // AMPL_HI is a high impedance (10MOhm || 1MOhm) output, the input capacitance of the ADC is 12pF (typical). This results in a time constant
        // AMPL_HI is a high impedance (10MOhm || 1MOhm) output, the input capacitance of the ADC is 12pF (typical). This results in a time constant

-       // of RC = (0.91MOhm) * 12pF = 10.9us. Even after the maximum configurable sample&hold time of 40us the input capacitor will not be fully charged. 
-       // 
+       // of RC = (0.91MOhm) * 12pF = 10.9us. Even after the maximum configurable sample&hold time of 40us the input capacitor will not be fully charged.
+       //

        // The maths are:
        // If there is a voltage v_in at the input, the voltage v_cap at the capacitor (this is what we are measuring) will be
        //
        // The maths are:
        // If there is a voltage v_in at the input, the voltage v_cap at the capacitor (this is what we are measuring) will be
        //


@@ -153,20 +147,19 @@ static int ReadAdc(int ch)
 
        AT91C_BASE_ADC->ADC_CR = AT91C_ADC_SWRST;
        AT91C_BASE_ADC->ADC_MR =
 
        AT91C_BASE_ADC->ADC_CR = AT91C_ADC_SWRST;
        AT91C_BASE_ADC->ADC_MR =

-               ADC_MODE_PRESCALE(63) |                                                 // ADC_CLK = MCK / ((63+1) * 2) = 48MHz / 128 = 375kHz
-               ADC_MODE_STARTUP_TIME(1) |                                              // Startup Time = (1+1) * 8 / ADC_CLK = 16 / 375kHz = 42,7us     Note: must be > 20us
-               ADC_MODE_SAMPLE_HOLD_TIME(15);                                  // Sample & Hold Time SHTIM = 15 / ADC_CLK = 15 / 375kHz = 40us
+               ADC_MODE_PRESCALE(63) |                         // ADC_CLK = MCK / ((63+1) * 2) = 48MHz / 128 = 375kHz
+               ADC_MODE_STARTUP_TIME(1) |                      // Startup Time = (1+1) * 8 / ADC_CLK = 16 / 375kHz = 42,7us     Note: must be > 20us
+               ADC_MODE_SAMPLE_HOLD_TIME(15);                  // Sample & Hold Time SHTIM = 15 / ADC_CLK = 15 / 375kHz = 40us

 
        AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ch);
        AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
 
        while(!(AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ch))) {};
 
        AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ch);
        AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
 
        while(!(AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ch))) {};

-       
+

        return AT91C_BASE_ADC->ADC_CDR[ch] & 0x3ff;
 }
 
        return AT91C_BASE_ADC->ADC_CDR[ch] & 0x3ff;
 }
 

-int AvgAdc(int ch) // was static - merlok
-{
+int AvgAdc(int ch) { // was static - merlok{

        int i;
        int a = 0;
 
        int i;
        int a = 0;
 


@@ -177,10 +170,9 @@ int AvgAdc(int ch) // was static - merlok
        return (a + 15) >> 5;
 }
 
        return (a + 15) >> 5;
 }
 

-static int AvgAdc_Voltage_HF(void)
-{
+static int AvgAdc_Voltage_HF(void) {

        int AvgAdc_Voltage_Low, AvgAdc_Voltage_High;
        int AvgAdc_Voltage_Low, AvgAdc_Voltage_High;

-       
+

        AvgAdc_Voltage_Low= (MAX_ADC_HF_VOLTAGE_LOW * AvgAdc(ADC_CHAN_HF_LOW)) >> 10;
        // if voltage range is about to be exceeded, use high voltage ADC channel if available (RDV40 only)
        if (AvgAdc_Voltage_Low > MAX_ADC_HF_VOLTAGE_LOW - 300) {
        AvgAdc_Voltage_Low= (MAX_ADC_HF_VOLTAGE_LOW * AvgAdc(ADC_CHAN_HF_LOW)) >> 10;
        // if voltage range is about to be exceeded, use high voltage ADC channel if available (RDV40 only)
        if (AvgAdc_Voltage_Low > MAX_ADC_HF_VOLTAGE_LOW - 300) {


@@ -192,13 +184,11 @@ static int AvgAdc_Voltage_HF(void)
        return AvgAdc_Voltage_Low;
 }
 
        return AvgAdc_Voltage_Low;
 }
 

-static int AvgAdc_Voltage_LF(void)
-{
+static int AvgAdc_Voltage_LF(void) {

        return (MAX_ADC_LF_VOLTAGE * AvgAdc(ADC_CHAN_LF)) >> 10;
 }
 
        return (MAX_ADC_LF_VOLTAGE * AvgAdc(ADC_CHAN_LF)) >> 10;
 }
 

-void MeasureAntennaTuningLfOnly(int *vLf125, int *vLf134, int *peakf, int *peakv, uint8_t LF_Results[])
-{
+void MeasureAntennaTuningLfOnly(int *vLf125, int *vLf134, int *peakf, int *peakv, uint8_t LF_Results[]) {

        int i, adcval = 0, peak = 0;
 
 /*
        int i, adcval = 0, peak = 0;
 
 /*


@@ -213,17 +203,17 @@ void MeasureAntennaTuningLfOnly(int *vLf125, int *vLf134, int *peakf, int *peakv
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
        SpinDelay(50);
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
        SpinDelay(50);

-       
-       for (i=255; i>=19; i--) {
+
+       for (i = 255; i >= 19; i--) {

                WDT_HIT();
                FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);
                SpinDelay(20);
                adcval = AvgAdc_Voltage_LF();
                WDT_HIT();
                FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);
                SpinDelay(20);
                adcval = AvgAdc_Voltage_LF();

-               if (i==95) *vLf125 = adcval; // voltage at 125Khz
-               if (i==89) *vLf134 = adcval; // voltage at 134Khz
+               if (i == 95) *vLf125 = adcval; // voltage at 125Khz
+               if (i == 89) *vLf134 = adcval; // voltage at 134Khz

 
                LF_Results[i] = adcval >> 9; // scale int to fit in byte for graphing purposes
 
                LF_Results[i] = adcval >> 9; // scale int to fit in byte for graphing purposes

-               if(LF_Results[i] > peak) {
+               if (LF_Results[i] > peak) {

                        *peakv = adcval;
                        peak = LF_Results[i];
                        *peakf = i;
                        *peakv = adcval;
                        peak = LF_Results[i];
                        *peakf = i;


@@ -231,25 +221,23 @@ void MeasureAntennaTuningLfOnly(int *vLf125, int *vLf134, int *peakf, int *peakv
                }
        }
 
                }
        }
 

-       for (i=18; i >= 0; i--) LF_Results[i] = 0;
+       for (i = 18; i >= 0; i--) LF_Results[i] = 0;

 
        return;
 }
 
 
        return;
 }
 

-void MeasureAntennaTuningHfOnly(int *vHf)
-{
+void MeasureAntennaTuningHfOnly(int *vHf) {

        // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
        LED_A_ON();
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
        // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
        LED_A_ON();
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

-       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER);

        SpinDelay(20);
        *vHf = AvgAdc_Voltage_HF();
        LED_A_OFF();
        return;
 }
 
        SpinDelay(20);
        *vHf = AvgAdc_Voltage_HF();
        LED_A_OFF();
        return;
 }
 

-void MeasureAntennaTuning(int mode)
-{
+void MeasureAntennaTuning(int mode) {

        uint8_t LF_Results[256] = {0};
        int peakv = 0, peakf = 0;
        int vLf125 = 0, vLf134 = 0, vHf = 0; // in mV
        uint8_t LF_Results[256] = {0};
        int peakv = 0, peakf = 0;
        int vLf125 = 0, vLf134 = 0, vHf = 0; // in mV


@@ -275,15 +263,14 @@ void MeasureAntennaTuning(int mode)
        return;
 }
 
        return;
 }
 

-void MeasureAntennaTuningHf(void)
-{
-       int vHf = 0;    // in mV
+void MeasureAntennaTuningHf(void) {
+       int vHf = 0;    // in mV

 
        DbpString("Measuring HF antenna, press button to exit");
 
        // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 
        DbpString("Measuring HF antenna, press button to exit");
 
        // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);

-       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER);

 
        for (;;) {
                SpinDelay(500);
 
        for (;;) {
                SpinDelay(500);


@@ -299,8 +286,7 @@ void MeasureAntennaTuningHf(void)
 }
 
 
 }
 
 

-void ReadMem(int addr)
-{
+void ReadMem(int addr) {

        const uint8_t *data = ((uint8_t *)addr);
 
        Dbprintf("%x: %02x %02x %02x %02x %02x %02x %02x %02x",
        const uint8_t *data = ((uint8_t *)addr);
 
        Dbprintf("%x: %02x %02x %02x %02x %02x %02x %02x %02x",


@@ -313,22 +299,21 @@ extern struct version_information version_information;
 extern char *_bootphase1_version_pointer, _flash_start, _flash_end, _bootrom_start, _bootrom_end, __data_src_start__;
 
 
 extern char *_bootphase1_version_pointer, _flash_start, _flash_end, _bootrom_start, _bootrom_end, __data_src_start__;
 
 

-void set_hw_capabilities(void)
-{
+void set_hw_capabilities(void) {

        if (I2C_is_available()) {
                hw_capabilities |= HAS_SMARTCARD_SLOT;
        }
        if (I2C_is_available()) {
                hw_capabilities |= HAS_SMARTCARD_SLOT;
        }

-       
+

        if (false) { // TODO: implement a test
                hw_capabilities |= HAS_EXTRA_FLASH_MEM;
        }
        if (false) { // TODO: implement a test
                hw_capabilities |= HAS_EXTRA_FLASH_MEM;
        }

-}      
+}

 
 
 
 

-void SendVersion(void)
-{
+void SendVersion(void) {
+       LED_A_ON();

        set_hw_capabilities();
        set_hw_capabilities();

-       
+

        char temp[USB_CMD_DATA_SIZE]; /* Limited data payload in USB packets */
        char VersionString[USB_CMD_DATA_SIZE] = { '\0' };
 
        char temp[USB_CMD_DATA_SIZE]; /* Limited data payload in USB packets */
        char VersionString[USB_CMD_DATA_SIZE] = { '\0' };
 


@@ -337,7 +322,7 @@ void SendVersion(void)
         * pointer, then use it.
         */
        char *bootrom_version = *(char**)&_bootphase1_version_pointer;
         * pointer, then use it.
         */
        char *bootrom_version = *(char**)&_bootphase1_version_pointer;

-       if( bootrom_version < &_flash_start || bootrom_version >= &_flash_end ) {
+       if (bootrom_version < &_flash_start || bootrom_version >= &_flash_end) {

                strcat(VersionString, "bootrom version information appears invalid\n");
        } else {
                FormatVersionInformation(temp, sizeof(temp), "bootrom: ", bootrom_version);
                strcat(VersionString, "bootrom version information appears invalid\n");
        } else {
                FormatVersionInformation(temp, sizeof(temp), "bootrom: ", bootrom_version);


@@ -351,54 +336,52 @@ void SendVersion(void)
                strncat(VersionString, fpga_version_information[i], sizeof(VersionString) - strlen(VersionString) - 1);
                strncat(VersionString, "\n", sizeof(VersionString) - strlen(VersionString) - 1);
        }
                strncat(VersionString, fpga_version_information[i], sizeof(VersionString) - strlen(VersionString) - 1);
                strncat(VersionString, "\n", sizeof(VersionString) - strlen(VersionString) - 1);
        }

-       
+

        // test availability of SmartCard slot
        if (I2C_is_available()) {
                strncat(VersionString, "SmartCard Slot: available\n", sizeof(VersionString) - strlen(VersionString) - 1);
        } else {
                strncat(VersionString, "SmartCard Slot: not available\n", sizeof(VersionString) - strlen(VersionString) - 1);
        }
        // test availability of SmartCard slot
        if (I2C_is_available()) {
                strncat(VersionString, "SmartCard Slot: available\n", sizeof(VersionString) - strlen(VersionString) - 1);
        } else {
                strncat(VersionString, "SmartCard Slot: not available\n", sizeof(VersionString) - strlen(VersionString) - 1);
        }

-       
+

        // Send Chip ID and used flash memory
        uint32_t text_and_rodata_section_size = (uint32_t)&__data_src_start__ - (uint32_t)&_flash_start;
        uint32_t compressed_data_section_size = common_area.arg1;
        // Send Chip ID and used flash memory
        uint32_t text_and_rodata_section_size = (uint32_t)&__data_src_start__ - (uint32_t)&_flash_start;
        uint32_t compressed_data_section_size = common_area.arg1;

-       cmd_send(CMD_ACK, *(AT91C_DBGU_CIDR), text_and_rodata_section_size + compressed_data_section_size, hw_capabilities, VersionString, strlen(VersionString));
+       cmd_send(CMD_ACK, *(AT91C_DBGU_CIDR), text_and_rodata_section_size + compressed_data_section_size, hw_capabilities, VersionString, strlen(VersionString) + 1);
+       LED_A_OFF();

 }
 
 // measure the USB Speed by sending SpeedTestBufferSize bytes to client and measuring the elapsed time.
 // Note: this mimics GetFromBigbuf(), i.e. we have the overhead of the UsbCommand structure included.
 }
 
 // measure the USB Speed by sending SpeedTestBufferSize bytes to client and measuring the elapsed time.
 // Note: this mimics GetFromBigbuf(), i.e. we have the overhead of the UsbCommand structure included.

-void printUSBSpeed(void) 
-{
+void printUSBSpeed(void) {

        Dbprintf("USB Speed:");
        Dbprintf("  Sending USB packets to client...");
 
        Dbprintf("USB Speed:");
        Dbprintf("  Sending USB packets to client...");
 

-       #define USB_SPEED_TEST_MIN_TIME 1500    // in milliseconds
+       #define USB_SPEED_TEST_MIN_TIME 1500    // in milliseconds

        uint8_t *test_data = BigBuf_get_addr();
        uint32_t end_time;
 
        uint32_t start_time = end_time = GetTickCount();
        uint32_t bytes_transferred = 0;
        uint8_t *test_data = BigBuf_get_addr();
        uint32_t end_time;
 
        uint32_t start_time = end_time = GetTickCount();
        uint32_t bytes_transferred = 0;

-       
-       LED_B_ON();
-       while(end_time < start_time + USB_SPEED_TEST_MIN_TIME) {
+
+       while (end_time < start_time + USB_SPEED_TEST_MIN_TIME) {

                cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K, 0, USB_CMD_DATA_SIZE, 0, test_data, USB_CMD_DATA_SIZE);
                end_time = GetTickCount();
                bytes_transferred += USB_CMD_DATA_SIZE;
        }
                cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K, 0, USB_CMD_DATA_SIZE, 0, test_data, USB_CMD_DATA_SIZE);
                end_time = GetTickCount();
                bytes_transferred += USB_CMD_DATA_SIZE;
        }

-       LED_B_OFF();

 
        Dbprintf("  Time elapsed:      %dms", end_time - start_time);
        Dbprintf("  Bytes transferred: %d", bytes_transferred);
 
        Dbprintf("  Time elapsed:      %dms", end_time - start_time);
        Dbprintf("  Bytes transferred: %d", bytes_transferred);

-       Dbprintf("  USB Transfer Speed PM3 -> Client = %d Bytes/s", 
+       Dbprintf("  USB Transfer Speed PM3 -> Client = %d Bytes/s",

                1000 * bytes_transferred / (end_time - start_time));
 
 }
                1000 * bytes_transferred / (end_time - start_time));
 
 }

-       
+

 /**
   * Prints runtime information about the PM3.
 **/
 /**
   * Prints runtime information about the PM3.
 **/

-void SendStatus(void)
-{
+void SendStatus(void) {
+       LED_A_ON();

        BigBuf_print_status();
        Fpga_print_status();
 #ifdef WITH_SMARTCARD
        BigBuf_print_status();
        Fpga_print_status();
 #ifdef WITH_SMARTCARD


@@ -411,27 +394,26 @@ void SendStatus(void)
        Dbprintf("  ToSendMax..........%d", ToSendMax);
        Dbprintf("  ToSendBit..........%d", ToSendBit);
 
        Dbprintf("  ToSendMax..........%d", ToSendMax);
        Dbprintf("  ToSendBit..........%d", ToSendBit);
 

-       cmd_send(CMD_ACK,1,0,0,0,0);
+       cmd_send(CMD_ACK, 1, 0, 0, 0, 0);
+       LED_A_OFF();

 }
 
 #if defined(WITH_ISO14443a_StandAlone) || defined(WITH_LF_StandAlone)
 
 #define OPTS 2
 
 }
 
 #if defined(WITH_ISO14443a_StandAlone) || defined(WITH_LF_StandAlone)
 
 #define OPTS 2
 

-void StandAloneMode()
-{
+void StandAloneMode() {

        DbpString("Stand-alone mode! No PC necessary.");
        // Oooh pretty -- notify user we're in elite samy mode now
        DbpString("Stand-alone mode! No PC necessary.");
        // Oooh pretty -- notify user we're in elite samy mode now

-       LED(LED_RED,    200);
+       LED(LED_RED,    200);

        LED(LED_ORANGE, 200);
        LED(LED_ORANGE, 200);

-       LED(LED_GREEN,  200);
+       LED(LED_GREEN,  200);

        LED(LED_ORANGE, 200);
        LED(LED_ORANGE, 200);

-       LED(LED_RED,    200);
+       LED(LED_RED,    200);

        LED(LED_ORANGE, 200);
        LED(LED_ORANGE, 200);

-       LED(LED_GREEN,  200);
+       LED(LED_GREEN,  200);

        LED(LED_ORANGE, 200);
        LED(LED_ORANGE, 200);

-       LED(LED_RED,    200);
-
+       LED(LED_RED,    200);

 }
 
 #endif
 }
 
 #endif


@@ -439,8 +421,7 @@ void StandAloneMode()
 
 
 #ifdef WITH_ISO14443a_StandAlone
 
 
 #ifdef WITH_ISO14443a_StandAlone

-void StandAloneMode14a()
-{
+void StandAloneMode14a() {

        StandAloneMode();
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 
        StandAloneMode();
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 


@@ -456,14 +437,12 @@ void StandAloneMode14a()
 
        LED(selected + 1, 0);
 
 
        LED(selected + 1, 0);
 

-       for (;;)
-       {
+       for (;;) {

                usb_poll();
                WDT_HIT();
                SpinDelay(300);
 
                usb_poll();
                WDT_HIT();
                SpinDelay(300);
 

-               if (GotoRecord || !cardRead[selected])
-               {
+               if (GotoRecord || !cardRead[selected]) {

                        GotoRecord = false;
                        LEDsoff();
                        LED(selected + 1, 0);
                        GotoRecord = false;
                        LEDsoff();
                        LED(selected + 1, 0);


@@ -478,48 +457,42 @@ void StandAloneMode14a()
                        uint32_t cuid;
                        iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
 
                        uint32_t cuid;
                        iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
 

-                       for ( ; ; )
-                       {
+                       for ( ; ; ) {

                                WDT_HIT();
                                if (BUTTON_PRESS()) {
                                        if (cardRead[selected]) {
                                                Dbprintf("Button press detected -- replaying card in bank[%d]", selected);
                                                break;
                                WDT_HIT();
                                if (BUTTON_PRESS()) {
                                        if (cardRead[selected]) {
                                                Dbprintf("Button press detected -- replaying card in bank[%d]", selected);
                                                break;

-                                       }
-                                       else if (cardRead[(selected+1)%OPTS]) {
+                                       } else if (cardRead[(selected+1)%OPTS]) {

                                                Dbprintf("Button press detected but no card in bank[%d] so playing from bank[%d]", selected, (selected+1)%OPTS);
                                                selected = (selected+1)%OPTS;
                                                break;
                                                Dbprintf("Button press detected but no card in bank[%d] so playing from bank[%d]", selected, (selected+1)%OPTS);
                                                selected = (selected+1)%OPTS;
                                                break;

-                                       }
-                                       else {
+                                       } else {

                                                Dbprintf("Button press detected but no stored tag to play. (Ignoring button)");
                                                SpinDelay(300);
                                        }
                                }
                                if (!iso14443a_select_card(uid, &hi14a_card[selected], &cuid, true, 0, true))
                                        continue;
                                                Dbprintf("Button press detected but no stored tag to play. (Ignoring button)");
                                                SpinDelay(300);
                                        }
                                }
                                if (!iso14443a_select_card(uid, &hi14a_card[selected], &cuid, true, 0, true))
                                        continue;

-                               else
-                               {
+                               else {

                                        Dbprintf("Read UID:"); Dbhexdump(10,uid,0);
                                        memcpy(readUID,uid,10*sizeof(uint8_t));
                                        uint8_t *dst = (uint8_t *)&uid_tmp1;
                                        // Set UID byte order
                                        Dbprintf("Read UID:"); Dbhexdump(10,uid,0);
                                        memcpy(readUID,uid,10*sizeof(uint8_t));
                                        uint8_t *dst = (uint8_t *)&uid_tmp1;
                                        // Set UID byte order

-                                       for (int i=0; i<4; i++)
+                                       for (int i = 0; i < 4; i++)

                                                dst[i] = uid[3-i];
                                        dst = (uint8_t *)&uid_tmp2;
                                                dst[i] = uid[3-i];
                                        dst = (uint8_t *)&uid_tmp2;

-                                       for (int i=0; i<4; i++)
+                                       for (int i = 0; i < 4; i++)

                                                dst[i] = uid[7-i];
                                                dst[i] = uid[7-i];

-                                       if (uid_1st[(selected+1)%OPTS] == uid_tmp1 && uid_2nd[(selected+1)%OPTS] == uid_tmp2) {
+                                       if (uid_1st[(selected+1) % OPTS] == uid_tmp1 && uid_2nd[(selected+1) % OPTS] == uid_tmp2) {

                                                Dbprintf("Card selected has same UID as what is stored in the other bank. Skipping.");
                                                Dbprintf("Card selected has same UID as what is stored in the other bank. Skipping.");

-                                       }
-                                       else {
+                                       } else {

                                                if (uid_tmp2) {
                                                if (uid_tmp2) {

-                                                       Dbprintf("Bank[%d] received a 7-byte UID",selected);
+                                                       Dbprintf("Bank[%d] received a 7-byte UID", selected);

                                                        uid_1st[selected] = (uid_tmp1)>>8;
                                                        uid_2nd[selected] = (uid_tmp1<<24) + (uid_tmp2>>8);
                                                        uid_1st[selected] = (uid_tmp1)>>8;
                                                        uid_2nd[selected] = (uid_tmp1<<24) + (uid_tmp2>>8);

-                                               }
-                                               else {
-                                                       Dbprintf("Bank[%d] received a 4-byte UID",selected);
+                                               } else {
+                                                       Dbprintf("Bank[%d] received a 4-byte UID", selected);

                                                        uid_1st[selected] = uid_tmp1;
                                                        uid_2nd[selected] = uid_tmp2;
                                                }
                                                        uid_1st[selected] = uid_tmp1;
                                                        uid_2nd[selected] = uid_tmp2;
                                                }


@@ -527,8 +500,8 @@ void StandAloneMode14a()
                                        }
                                }
                        }
                                        }
                                }
                        }

-                       Dbprintf("ATQA = %02X%02X",hi14a_card[selected].atqa[0],hi14a_card[selected].atqa[1]);
-                       Dbprintf("SAK = %02X",hi14a_card[selected].sak);
+                       Dbprintf("ATQA = %02X%02X", hi14a_card[selected].atqa[0], hi14a_card[selected].atqa[1]);
+                       Dbprintf("SAK = %02X", hi14a_card[selected].sak);

                        LEDsoff();
                        LED(LED_GREEN,  200);
                        LED(LED_ORANGE, 200);
                        LEDsoff();
                        LED(LED_GREEN,  200);
                        LED(LED_ORANGE, 200);


@@ -542,10 +515,7 @@ void StandAloneMode14a()
                        playing = true;
 
                        cardRead[selected] = true;
                        playing = true;
 
                        cardRead[selected] = true;

-               }
-               /* MF Classic UID clone */
-               else if (GotoClone)
-               {
+               } else if (GotoClone) { /* MF Classic UID clone */

                        GotoClone=false;
                        LEDsoff();
                        LED(selected + 1, 0);
                        GotoClone=false;
                        LEDsoff();
                        LED(selected + 1, 0);


@@ -556,8 +526,7 @@ void StandAloneMode14a()
                        Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]);
 
                        // wait for button to be released
                        Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]);
 
                        // wait for button to be released

-                       while(BUTTON_PRESS())
-                       {
+                       while(BUTTON_PRESS()) {

                                // Delay cloning until card is in place
                                WDT_HIT();
                        }
                                // Delay cloning until card is in place
                                WDT_HIT();
                        }


@@ -598,29 +567,26 @@ void StandAloneMode14a()
                        if (oldBlock0[0] == 0 && oldBlock0[0] == oldBlock0[1]  && oldBlock0[1] == oldBlock0[2] && oldBlock0[2] == oldBlock0[3]) {
                                Dbprintf("No changeable tag detected. Returning to replay mode for bank[%d]", selected);
                                playing = true;
                        if (oldBlock0[0] == 0 && oldBlock0[0] == oldBlock0[1]  && oldBlock0[1] == oldBlock0[2] && oldBlock0[2] == oldBlock0[3]) {
                                Dbprintf("No changeable tag detected. Returning to replay mode for bank[%d]", selected);
                                playing = true;

-                       }
-                       else {
-                               Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0],oldBlock0[1],oldBlock0[2],oldBlock0[3]);
-                               memcpy(newBlock0,oldBlock0,16);
+                       } else {
+                               Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0], oldBlock0[1], oldBlock0[2], oldBlock0[3]);
+                               memcpy(newBlock0, oldBlock0, 16);

                                // Copy uid_1st for bank (2nd is for longer UIDs not supported if classic)
 
                                // Copy uid_1st for bank (2nd is for longer UIDs not supported if classic)
 

-                               newBlock0[0] = uid_1st[selected]>>24;
-                               newBlock0[1] = 0xFF & (uid_1st[selected]>>16);
-                               newBlock0[2] = 0xFF & (uid_1st[selected]>>8);
+                               newBlock0[0] = uid_1st[selected] >> 24;
+                               newBlock0[1] = 0xFF & (uid_1st[selected] >> 16);
+                               newBlock0[2] = 0xFF & (uid_1st[selected] >> 8);

                                newBlock0[3] = 0xFF & (uid_1st[selected]);
                                newBlock0[3] = 0xFF & (uid_1st[selected]);

-                               newBlock0[4] = newBlock0[0]^newBlock0[1]^newBlock0[2]^newBlock0[3];
+                               newBlock0[4] = newBlock0[0] ^ newBlock0[1] ^ newBlock0[2] ^ newBlock0[3];

                                // arg0 = needWipe, arg1 = workFlags, arg2 = blockNo, datain
                                // arg0 = needWipe, arg1 = workFlags, arg2 = blockNo, datain

-                               MifareCSetBlock(0, 0xFF,0, newBlock0);
+                               MifareCSetBlock(0, 0xFF, 0, newBlock0);

                                MifareCGetBlock(0x3F, 1, 0, testBlock0);
                                MifareCGetBlock(0x3F, 1, 0, testBlock0);

-                               if (memcmp(testBlock0,newBlock0,16)==0)
-                               {
+                               if (memcmp(testBlock0, newBlock0, 16) == 0) {

                                        DbpString("Cloned successfull!");
                                        cardRead[selected] = false; // Only if the card was cloned successfully should we clear it
                                        playing = false;
                                        GotoRecord = true;
                                        selected = (selected+1) % OPTS;
                                        DbpString("Cloned successfull!");
                                        cardRead[selected] = false; // Only if the card was cloned successfully should we clear it
                                        playing = false;
                                        GotoRecord = true;
                                        selected = (selected+1) % OPTS;

-                               }
-                               else {
+                               } else {

                                        Dbprintf("Clone failed. Back to replay mode on bank[%d]", selected);
                                        playing = true;
                                }
                                        Dbprintf("Clone failed. Back to replay mode on bank[%d]", selected);
                                        playing = true;
                                }


@@ -628,10 +594,9 @@ void StandAloneMode14a()
                        LEDsoff();
                        LED(selected + 1, 0);
 
                        LEDsoff();
                        LED(selected + 1, 0);
 

-               }
-               // Change where to record (or begin playing)
-               else if (playing) // button_pressed == BUTTON_SINGLE_CLICK && cardRead[selected])
-               {
+               } else if (playing) {
+                       // button_pressed == BUTTON_SINGLE_CLICK && cardRead[selected])
+                       // Change where to record (or begin playing)

                        LEDsoff();
                        LED(selected + 1, 0);
 
                        LEDsoff();
                        LED(selected + 1, 0);
 


@@ -643,31 +608,26 @@ void StandAloneMode14a()
                                int button_action = BUTTON_HELD(1000);
                                if (button_action == 0) { // No button action, proceed with sim
                                        uint8_t data[512] = {0}; // in case there is a read command received we shouldn't break
                                int button_action = BUTTON_HELD(1000);
                                if (button_action == 0) { // No button action, proceed with sim
                                        uint8_t data[512] = {0}; // in case there is a read command received we shouldn't break

-                                       Dbprintf("Simulating ISO14443a tag with uid[0]: %08x, uid[1]: %08x [Bank: %u]", uid_1st[selected],uid_2nd[selected],selected);
+                                       Dbprintf("Simulating ISO14443a tag with uid[0]: %08x, uid[1]: %08x [Bank: %u]", uid_1st[selected], uid_2nd[selected], selected);

                                        if (hi14a_card[selected].sak == 8 && hi14a_card[selected].atqa[0] == 4 && hi14a_card[selected].atqa[1] == 0) {
                                                DbpString("Mifare Classic");
                                        if (hi14a_card[selected].sak == 8 && hi14a_card[selected].atqa[0] == 4 && hi14a_card[selected].atqa[1] == 0) {
                                                DbpString("Mifare Classic");

-                                               SimulateIso14443aTag(1,uid_1st[selected], uid_2nd[selected], data); // Mifare Classic
-                                       }
-                                       else if (hi14a_card[selected].sak == 0 && hi14a_card[selected].atqa[0] == 0x44 && hi14a_card[selected].atqa[1] == 0) {
+                                               SimulateIso14443aTag(1, uid_1st[selected], uid_2nd[selected], data); // Mifare Classic
+                                       } else if (hi14a_card[selected].sak == 0 && hi14a_card[selected].atqa[0] == 0x44 && hi14a_card[selected].atqa[1] == 0) {

                                                DbpString("Mifare Ultralight");
                                                DbpString("Mifare Ultralight");

-                                               SimulateIso14443aTag(2,uid_1st[selected],uid_2nd[selected],data); // Mifare Ultralight
-                                       }
-                                       else if (hi14a_card[selected].sak == 20 && hi14a_card[selected].atqa[0] == 0x44 && hi14a_card[selected].atqa[1] == 3) {
+                                               SimulateIso14443aTag(2, uid_1st[selected], uid_2nd[selected], data); // Mifare Ultralight
+                                       } else if (hi14a_card[selected].sak == 20 && hi14a_card[selected].atqa[0] == 0x44 && hi14a_card[selected].atqa[1] == 3) {

                                                DbpString("Mifare DESFire");
                                                DbpString("Mifare DESFire");

-                                               SimulateIso14443aTag(3,uid_1st[selected],uid_2nd[selected],data); // Mifare DESFire
-                                       }
-                                       else {
+                                               SimulateIso14443aTag(3, uid_1st[selected], uid_2nd[selected], data); // Mifare DESFire
+                                       } else {

                                                Dbprintf("Unrecognized tag type -- defaulting to Mifare Classic emulation");
                                                Dbprintf("Unrecognized tag type -- defaulting to Mifare Classic emulation");

-                                               SimulateIso14443aTag(1,uid_1st[selected], uid_2nd[selected], data);
+                                               SimulateIso14443aTag(1, uid_1st[selected], uid_2nd[selected], data);

                                        }
                                        }

-                               }
-                               else if (button_action == BUTTON_SINGLE_CLICK) {
+                               } else if (button_action == BUTTON_SINGLE_CLICK) {

                                        selected = (selected + 1) % OPTS;
                                        Dbprintf("Done playing. Switching to record mode on bank %d",selected);
                                        GotoRecord = true;
                                        break;
                                        selected = (selected + 1) % OPTS;
                                        Dbprintf("Done playing. Switching to record mode on bank %d",selected);
                                        GotoRecord = true;
                                        break;

-                               }
-                               else if (button_action == BUTTON_HOLD) {
+                               } else if (button_action == BUTTON_HOLD) {

                                        Dbprintf("Playtime over. Begin cloning...");
                                        GotoClone = true;
                                        break;
                                        Dbprintf("Playtime over. Begin cloning...");
                                        GotoClone = true;
                                        break;


@@ -682,10 +642,11 @@ void StandAloneMode14a()
                }
        }
 }
                }
        }
 }

+

 #elif WITH_LF_StandAlone
 #elif WITH_LF_StandAlone

+

 // samy's sniff and repeat routine
 // samy's sniff and repeat routine

-void SamyRun()
-{
+void SamyRun() {

        StandAloneMode();
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
 
        StandAloneMode();
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
 


@@ -697,8 +658,7 @@ void SamyRun()
        // Turn on selected LED
        LED(selected + 1, 0);
 
        // Turn on selected LED
        LED(selected + 1, 0);
 

-       for (;;)
-       {
+       for (;;) {

                usb_poll();
                WDT_HIT();
 
                usb_poll();
                WDT_HIT();
 


@@ -707,8 +667,7 @@ void SamyRun()
                SpinDelay(300);
 
                // Button was held for a second, begin recording
                SpinDelay(300);
 
                // Button was held for a second, begin recording

-               if (button_pressed > 0 && cardRead == 0)
-               {
+               if (button_pressed > 0 && cardRead == 0) {

                        LEDsoff();
                        LED(selected + 1, 0);
                        LED(LED_RED2, 0);
                        LEDsoff();
                        LED(selected + 1, 0);
                        LED(LED_RED2, 0);


@@ -736,51 +695,46 @@ void SamyRun()
                        // If we were previously playing, set playing off
                        // so next button push begins playing what we recorded
                        playing = 0;
                        // If we were previously playing, set playing off
                        // so next button push begins playing what we recorded
                        playing = 0;

-                       
+

                        cardRead = 1;
                        cardRead = 1;

-       
-               }

 
 

-               else if (button_pressed > 0 && cardRead == 1)
-               {
-                                       LEDsoff();
-                                       LED(selected + 1, 0);
-                                       LED(LED_ORANGE, 0);
+               } else if (button_pressed > 0 && cardRead == 1) {
+                       LEDsoff();
+                       LED(selected + 1, 0);
+                       LED(LED_ORANGE, 0);
+
+                       // record
+                       if (tops[selected] > 0)
+                               Dbprintf("Cloning %x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);
+                       else
+                               Dbprintf("Cloning %x %x%08x", selected, high[selected], low[selected]);
+
+                       // wait for button to be released
+                       while(BUTTON_PRESS())
+                               WDT_HIT();
+
+                       /* need this delay to prevent catching some weird data */
+                       SpinDelay(500);

 
 

-                                       // record
-                                       if (tops[selected] > 0)
-                                               Dbprintf("Cloning %x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);
-                                       else
-                                               Dbprintf("Cloning %x %x%08x", selected, high[selected], low[selected]);
+                       CopyHIDtoT55x7(tops[selected] & 0x000FFFFF, high[selected], low[selected], (tops[selected] != 0 && ((high[selected]& 0xFFFFFFC0) != 0)), 0x1D);
+                       if (tops[selected] > 0)
+                               Dbprintf("Cloned %x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);
+                       else
+                               Dbprintf("Cloned %x %x%08x", selected, high[selected], low[selected]);

 
 

-                                       // wait for button to be released
-                                       while(BUTTON_PRESS())
-                                               WDT_HIT();
+                       LEDsoff();
+                       LED(selected + 1, 0);
+                       // Finished recording

 
 

-                                       /* need this delay to prevent catching some weird data */
-                                       SpinDelay(500);
+                       // If we were previously playing, set playing off
+                       // so next button push begins playing what we recorded
+                       playing = 0;

 
 

-                                       CopyHIDtoT55x7(tops[selected] & 0x000FFFFF, high[selected], low[selected], (tops[selected] != 0 && ((high[selected]& 0xFFFFFFC0) != 0)), 0x1D);
-                                       if (tops[selected] > 0)
-                                               Dbprintf("Cloned %x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);
-                                       else
-                                               Dbprintf("Cloned %x %x%08x", selected, high[selected], low[selected]);
+                       cardRead = 0;

 
 

-                                       LEDsoff();
-                                       LED(selected + 1, 0);
-                                       // Finished recording
-
-                                       // If we were previously playing, set playing off
-                                       // so next button push begins playing what we recorded
-                                       playing = 0;
-                                       
-                                       cardRead = 0;
-                       
-               }
+               } else if (button_pressed) {

 
 

-               // Change where to record (or begin playing)
-               else if (button_pressed)
-               {
+                       // Change where to record (or begin playing)

                        // Next option if we were previously playing
                        if (playing)
                                selected = (selected + 1) % OPTS;
                        // Next option if we were previously playing
                        if (playing)
                                selected = (selected + 1) % OPTS;


@@ -790,8 +744,7 @@ void SamyRun()
                        LED(selected + 1, 0);
 
                        // Begin transmitting
                        LED(selected + 1, 0);
 
                        // Begin transmitting

-                       if (playing)
-                       {
+                       if (playing) {

                                LED(LED_GREEN, 0);
                                DbpString("Playing");
                                // wait for button to be released
                                LED(LED_GREEN, 0);
                                DbpString("Playing");
                                // wait for button to be released


@@ -801,15 +754,14 @@ void SamyRun()
                                        Dbprintf("%x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);
                                else
                                        Dbprintf("%x %x%08x", selected, high[selected], low[selected]);
                                        Dbprintf("%x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);
                                else
                                        Dbprintf("%x %x%08x", selected, high[selected], low[selected]);

-                               
+

                                CmdHIDsimTAG(tops[selected], high[selected], low[selected], 0);
                                DbpString("Done playing");
                                CmdHIDsimTAG(tops[selected], high[selected], low[selected], 0);
                                DbpString("Done playing");

-                               if (BUTTON_HELD(1000) > 0)
-                                       {
+                               if (BUTTON_HELD(1000) > 0) {

                                        DbpString("Exiting");
                                        LEDsoff();
                                        return;
                                        DbpString("Exiting");
                                        LEDsoff();
                                        return;

-                                       }
+                               }

 
                                /* We pressed a button so ignore it here with a delay */
                                SpinDelay(300);
 
                                /* We pressed a button so ignore it here with a delay */
                                SpinDelay(300);


@@ -819,8 +771,7 @@ void SamyRun()
                                playing = !playing;
                                LEDsoff();
                                LED(selected + 1, 0);
                                playing = !playing;
                                LEDsoff();
                                LED(selected + 1, 0);

-                       }
-                       else
+                       } else

                                while(BUTTON_PRESS())
                                        WDT_HIT();
                }
                                while(BUTTON_PRESS())
                                        WDT_HIT();
                }


@@ -828,6 +779,7 @@ void SamyRun()
 }
 
 #endif
 }
 
 #endif

+

 /*
 OBJECTIVE
 Listen and detect an external reader. Determine the best location
 /*
 OBJECTIVE
 Listen and detect an external reader. Determine the best location


@@ -863,10 +815,10 @@ static const char LIGHT_SCHEME[] = {
                0xE, /* -XXX     | 86% of maximum current detected */
                0xF, /* XXXX     | 100% of maximum current detected */
 };
                0xE, /* -XXX     | 86% of maximum current detected */
                0xF, /* XXXX     | 100% of maximum current detected */
 };

+

 static const int LIGHT_LEN = sizeof(LIGHT_SCHEME)/sizeof(LIGHT_SCHEME[0]);
 
 static const int LIGHT_LEN = sizeof(LIGHT_SCHEME)/sizeof(LIGHT_SCHEME[0]);
 

-void ListenReaderField(int limit)
-{
+void ListenReaderField(int limit) {

        int lf_av, lf_av_new=0, lf_baseline= 0, lf_max;
        int hf_av, hf_av_new=0,  hf_baseline= 0, hf_max;
        int mode=1, display_val, display_max, i;
        int lf_av, lf_av_new=0, lf_baseline= 0, lf_max;
        int hf_av, hf_av_new=0,  hf_baseline= 0, hf_max;
        int mode=1, display_val, display_max, i;


@@ -886,13 +838,13 @@ void ListenReaderField(int limit)
 
        lf_av = lf_max = AvgAdc_Voltage_LF();
 
 
        lf_av = lf_max = AvgAdc_Voltage_LF();
 

-       if(limit != HF_ONLY) {
+       if (limit != HF_ONLY) {

                Dbprintf("LF 125/134kHz Baseline: %dmV", lf_av);
                lf_baseline = lf_av;
        }
 
        hf_av = hf_max = AvgAdc_Voltage_HF();
                Dbprintf("LF 125/134kHz Baseline: %dmV", lf_av);
                lf_baseline = lf_av;
        }
 
        hf_av = hf_max = AvgAdc_Voltage_HF();

-       
+

        if (limit != LF_ONLY) {
                Dbprintf("HF 13.56MHz Baseline: %dmV", hf_av);
                hf_baseline = hf_av;
        if (limit != LF_ONLY) {
                Dbprintf("HF 13.56MHz Baseline: %dmV", hf_av);
                hf_baseline = hf_av;


@@ -913,7 +865,8 @@ void ListenReaderField(int limit)
                                        return;
                                        break;
                        }
                                        return;
                                        break;
                        }

-                       while (BUTTON_PRESS());
+                       while (BUTTON_PRESS())
+                               /* wait */;

                }
                WDT_HIT();
 
                }
                WDT_HIT();
 


@@ -927,7 +880,7 @@ void ListenReaderField(int limit)
 
                        lf_av_new = AvgAdc_Voltage_LF();
                        // see if there's a significant change
 
                        lf_av_new = AvgAdc_Voltage_LF();
                        // see if there's a significant change

-                       if (ABS((lf_av - lf_av_new)*100/(lf_av?lf_av:1)) > REPORT_CHANGE_PERCENT) {
+                       if (ABS((lf_av - lf_av_new) * 100 / (lf_av?lf_av:1)) > REPORT_CHANGE_PERCENT) {

                                Dbprintf("LF 125/134kHz Field Change: %5dmV", lf_av_new);
                                lf_av = lf_av_new;
                                if (lf_av > lf_max)
                                Dbprintf("LF 125/134kHz Field Change: %5dmV", lf_av_new);
                                lf_av = lf_av_new;
                                if (lf_av > lf_max)


@@ -944,9 +897,9 @@ void ListenReaderField(int limit)
                        }
 
                        hf_av_new = AvgAdc_Voltage_HF();
                        }
 
                        hf_av_new = AvgAdc_Voltage_HF();

-                       
+

                        // see if there's a significant change
                        // see if there's a significant change

-                       if (ABS((hf_av - hf_av_new)*100/(hf_av?hf_av:1)) > REPORT_CHANGE_PERCENT) {
+                       if (ABS((hf_av - hf_av_new) * 100 / (hf_av?hf_av:1)) > REPORT_CHANGE_PERCENT) {

                                Dbprintf("HF 13.56MHz Field Change: %5dmV", hf_av_new);
                                hf_av = hf_av_new;
                                if (hf_av > hf_max)
                                Dbprintf("HF 13.56MHz Field Change: %5dmV", hf_av_new);
                                hf_av = hf_av_new;
                                if (hf_av > hf_max)


@@ -954,7 +907,7 @@ void ListenReaderField(int limit)
                        }
                }
 
                        }
                }
 

-               if(mode == 2) {
+               if (mode == 2) {

                        if (limit == LF_ONLY) {
                                display_val = lf_av;
                                display_max = lf_max;
                        if (limit == LF_ONLY) {
                                display_val = lf_av;
                                display_max = lf_max;


@@ -970,8 +923,8 @@ void ListenReaderField(int limit)
                                        display_max = lf_max;
                                }
                        }
                                        display_max = lf_max;
                                }
                        }

-                       for (i=0; i<LIGHT_LEN; i++) {
-                               if (display_val >= ((display_max/LIGHT_LEN)*i) && display_val <= ((display_max/LIGHT_LEN)*(i+1))) {
+                       for (i = 0; i < LIGHT_LEN; i++) {
+                               if (display_val >= (display_max / LIGHT_LEN * i) && display_val <= (display_max / LIGHT_LEN * (i+1))) {

                                        if (LIGHT_SCHEME[i] & 0x1) LED_C_ON(); else LED_C_OFF();
                                        if (LIGHT_SCHEME[i] & 0x2) LED_A_ON(); else LED_A_OFF();
                                        if (LIGHT_SCHEME[i] & 0x4) LED_B_ON(); else LED_B_OFF();
                                        if (LIGHT_SCHEME[i] & 0x1) LED_C_ON(); else LED_C_OFF();
                                        if (LIGHT_SCHEME[i] & 0x2) LED_A_ON(); else LED_A_OFF();
                                        if (LIGHT_SCHEME[i] & 0x4) LED_B_ON(); else LED_B_OFF();


@@ -983,16 +936,15 @@ void ListenReaderField(int limit)
        }
 }
 
        }
 }
 

-void UsbPacketReceived(uint8_t *packet, int len)
-{
-       UsbCommand *c = (UsbCommand *)packet;
+
+void UsbPacketReceived(UsbCommand *c) {

 
 //  Dbprintf("received %d bytes, with command: 0x%04x and args: %d %d %d",len,c->cmd,c->arg[0],c->arg[1],c->arg[2]);
 
 //  Dbprintf("received %d bytes, with command: 0x%04x and args: %d %d %d",len,c->cmd,c->arg[0],c->arg[1],c->arg[2]);

-  
+

        switch(c->cmd) {
 #ifdef WITH_LF
                case CMD_SET_LF_SAMPLING_CONFIG:
        switch(c->cmd) {
 #ifdef WITH_LF
                case CMD_SET_LF_SAMPLING_CONFIG:

-                       setSamplingConfig((sample_config *) c->d.asBytes);
+                       setSamplingConfig(c->d.asBytes);

                        break;
                case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:
                        cmd_send(CMD_ACK,SampleLF(c->arg[0], c->arg[1]),0,0,0,0);
                        break;
                case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:
                        cmd_send(CMD_ACK,SampleLF(c->arg[0], c->arg[1]),0,0,0,0);


@@ -1052,7 +1004,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        SimulateTagLowFrequencyBidir(c->arg[0], c->arg[1]);
                        break;
                case CMD_INDALA_CLONE_TAG:
                        SimulateTagLowFrequencyBidir(c->arg[0], c->arg[1]);
                        break;
                case CMD_INDALA_CLONE_TAG:

-                       CopyIndala64toT55x7(c->arg[0], c->arg[1]);                                      
+                       CopyIndala64toT55x7(c->arg[0], c->arg[1]);

                        break;
                case CMD_INDALA_CLONE_TAG_L:
                        CopyIndala224toT55x7(c->d.asDwords[0], c->d.asDwords[1], c->d.asDwords[2], c->d.asDwords[3], c->d.asDwords[4], c->d.asDwords[5], c->d.asDwords[6]);
                        break;
                case CMD_INDALA_CLONE_TAG_L:
                        CopyIndala224toT55x7(c->d.asDwords[0], c->d.asDwords[1], c->d.asDwords[2], c->d.asDwords[3], c->d.asDwords[4], c->d.asDwords[5], c->d.asDwords[6]);


@@ -1084,6 +1036,9 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_EM4X_WRITE_WORD:
                        EM4xWriteWord(c->arg[0], c->arg[1], c->arg[2]);
                        break;
                case CMD_EM4X_WRITE_WORD:
                        EM4xWriteWord(c->arg[0], c->arg[1], c->arg[2]);
                        break;

+               case CMD_EM4X_PROTECT:
+                       EM4xProtect(c->arg[0], c->arg[1], c->arg[2]);
+                       break;

                case CMD_AWID_DEMOD_FSK: // Set realtime AWID demodulation
                        CmdAWIDdemodFSK(c->arg[0], 0, 0, 1);
                        break;
                case CMD_AWID_DEMOD_FSK: // Set realtime AWID demodulation
                        CmdAWIDdemodFSK(c->arg[0], 0, 0, 1);
                        break;


@@ -1100,16 +1055,16 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        SnoopHitag(c->arg[0]);
                        break;
                case CMD_SIMULATE_HITAG: // Simulate Hitag tag, args = memory content
                        SnoopHitag(c->arg[0]);
                        break;
                case CMD_SIMULATE_HITAG: // Simulate Hitag tag, args = memory content

-                       SimulateHitagTag((bool)c->arg[0],(byte_t*)c->d.asBytes);
+                       SimulateHitagTag((bool)c->arg[0], (uint8_t*)c->d.asBytes);

                        break;
                case CMD_READER_HITAG: // Reader for Hitag tags, args = type and function
                        ReaderHitag((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes);
                        break;
                case CMD_SIMULATE_HITAG_S:// Simulate Hitag s tag, args = memory content
                        break;
                case CMD_READER_HITAG: // Reader for Hitag tags, args = type and function
                        ReaderHitag((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes);
                        break;
                case CMD_SIMULATE_HITAG_S:// Simulate Hitag s tag, args = memory content

-                       SimulateHitagSTag((bool)c->arg[0],(byte_t*)c->d.asBytes);
+                       SimulateHitagSTag((bool)c->arg[0],(uint8_t*)c->d.asBytes);

                        break;
                case CMD_TEST_HITAGS_TRACES:// Tests every challenge within the given file
                        break;
                case CMD_TEST_HITAGS_TRACES:// Tests every challenge within the given file

-                       check_challenges_cmd((bool)c->arg[0], (byte_t*)c->d.asBytes, (uint8_t)c->arg[1]);
+                       check_challenges_cmd((bool)c->arg[0], (uint8_t*)c->d.asBytes, (uint8_t)c->arg[1]);

                        break;
                case CMD_READ_HITAG_S://Reader for only Hitag S tags, args = key or challenge
                        ReadHitagSCmd((hitag_function)c->arg[0], (hitag_data*)c->d.asBytes, (uint8_t)c->arg[1], (uint8_t)c->arg[2], false);
                        break;
                case CMD_READ_HITAG_S://Reader for only Hitag S tags, args = key or challenge
                        ReadHitagSCmd((hitag_function)c->arg[0], (hitag_data*)c->d.asBytes, (uint8_t)c->arg[1], (uint8_t)c->arg[2], false);


@@ -1131,19 +1086,19 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693:
                        AcquireRawAdcSamplesIso15693();
                        break;
                case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693:
                        AcquireRawAdcSamplesIso15693();
                        break;

-                       
+

                case CMD_SNOOP_ISO_15693:
                case CMD_SNOOP_ISO_15693:

-                       SnoopIso15693();
+                       SnoopIso15693(0, NULL);

                        break;
                        break;

-                       
+

                case CMD_ISO_15693_COMMAND:
                        DirectTag15693Command(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
                        break;
                case CMD_ISO_15693_COMMAND:
                        DirectTag15693Command(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
                        break;

-                                       
+

                case CMD_ISO_15693_FIND_AFI:
                        BruteforceIso15693Afi(c->arg[0]);
                case CMD_ISO_15693_FIND_AFI:
                        BruteforceIso15693Afi(c->arg[0]);

-                       break;  
-                       
+                       break;
+

                case CMD_ISO_15693_DEBUG:
                        SetDebugIso15693(c->arg[0]);
                        break;
                case CMD_ISO_15693_DEBUG:
                        SetDebugIso15693(c->arg[0]);
                        break;


@@ -1151,9 +1106,14 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_READER_ISO_15693:
                        ReaderIso15693(c->arg[0]);
                        break;
                case CMD_READER_ISO_15693:
                        ReaderIso15693(c->arg[0]);
                        break;

+

                case CMD_SIMTAG_ISO_15693:
                        SimTagIso15693(c->arg[0], c->d.asBytes);
                        break;
                case CMD_SIMTAG_ISO_15693:
                        SimTagIso15693(c->arg[0], c->d.asBytes);
                        break;

+
+               case CMD_CSETUID_ISO_15693:
+                       SetTag15693Uid(c->d.asBytes);
+                       break;

 #endif
 
 #ifdef WITH_LEGICRF
 #endif
 
 #ifdef WITH_LEGICRF


@@ -1198,14 +1158,14 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_SIMULATE_TAG_ISO_14443a:
                        SimulateIso14443aTag(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);  // ## Simulate iso14443a tag - pass tag type & UID
                        break;
                case CMD_SIMULATE_TAG_ISO_14443a:
                        SimulateIso14443aTag(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);  // ## Simulate iso14443a tag - pass tag type & UID
                        break;

-                       
+

                case CMD_EPA_PACE_COLLECT_NONCE:
                        EPA_PACE_Collect_Nonce(c);
                        break;
                case CMD_EPA_PACE_REPLAY:
                        EPA_PACE_Replay(c);
                        break;
                case CMD_EPA_PACE_COLLECT_NONCE:
                        EPA_PACE_Collect_Nonce(c);
                        break;
                case CMD_EPA_PACE_REPLAY:
                        EPA_PACE_Replay(c);
                        break;

-                       
+

                case CMD_READER_MIFARE:
                        ReaderMifare(c->arg[0]);
                        break;
                case CMD_READER_MIFARE:
                        ReaderMifare(c->arg[0]);
                        break;


@@ -1221,7 +1181,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_MIFAREU_READCARD:
                        MifareUReadCard(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFAREU_READCARD:
                        MifareUReadCard(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;

-               case CMD_MIFAREUC_SETPWD: 
+               case CMD_MIFAREUC_SETPWD:

                        MifareUSetPwd(c->arg[0], c->d.asBytes);
                        break;
                case CMD_MIFARE_READSC:
                        MifareUSetPwd(c->arg[0], c->d.asBytes);
                        break;
                case CMD_MIFARE_READSC:


@@ -1230,6 +1190,9 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_MIFARE_WRITEBL:
                        MifareWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_WRITEBL:
                        MifareWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;

+               case CMD_MIFARE_PERSONALIZE_UID:
+                       MifarePersonalizeUID(c->arg[0], c->arg[1], c->d.asBytes);
+                       break;

                //case CMD_MIFAREU_WRITEBL_COMPAT:
                        //MifareUWriteBlockCompat(c->arg[0], c->d.asBytes);
                        //break;
                //case CMD_MIFAREU_WRITEBL_COMPAT:
                        //MifareUWriteBlockCompat(c->arg[0], c->d.asBytes);
                        //break;


@@ -1246,9 +1209,9 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        MifareChkKeys(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_SIMULATE_MIFARE_CARD:
                        MifareChkKeys(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_SIMULATE_MIFARE_CARD:

-                       Mifare1ksim(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+                       MifareSim(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);

                        break;
                        break;

-               
+

                // emulator
                case CMD_MIFARE_SET_DBGMODE:
                        MifareSetDbgLvl(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                // emulator
                case CMD_MIFARE_SET_DBGMODE:
                        MifareSetDbgLvl(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);


@@ -1265,7 +1228,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_MIFARE_EML_CARDLOAD:
                        MifareECardLoad(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_EML_CARDLOAD:
                        MifareECardLoad(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;

-                       
+

                // Work with "magic Chinese" card
                case CMD_MIFARE_CWIPE:
                        MifareCWipe(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                // Work with "magic Chinese" card
                case CMD_MIFARE_CWIPE:
                        MifareCWipe(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);


@@ -1279,7 +1242,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_MIFARE_CIDENT:
                        MifareCIdent();
                        break;
                case CMD_MIFARE_CIDENT:
                        MifareCIdent();
                        break;

-                       
+

                // mifare sniffer
                case CMD_MIFARE_SNIFFER:
                        SniffMifare(c->arg[0]);
                // mifare sniffer
                case CMD_MIFARE_SNIFFER:
                        SniffMifare(c->arg[0]);


@@ -1290,7 +1253,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 #ifdef WITH_ICLASS
                // Makes use of ISO14443a FPGA Firmware
                case CMD_SNOOP_ICLASS:
 #ifdef WITH_ICLASS
                // Makes use of ISO14443a FPGA Firmware
                case CMD_SNOOP_ICLASS:

-                       SnoopIClass();
+                       SnoopIClass(c->arg[0], c->d.asBytes);

                        break;
                case CMD_SIMULATE_TAG_ICLASS:
                        SimulateIClass(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_SIMULATE_TAG_ICLASS:
                        SimulateIClass(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);


@@ -1298,23 +1261,20 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_READER_ICLASS:
                        ReaderIClass(c->arg[0]);
                        break;
                case CMD_READER_ICLASS:
                        ReaderIClass(c->arg[0]);
                        break;

-               case CMD_READER_ICLASS_REPLAY:
-                       ReaderIClass_Replay(c->arg[0], c->d.asBytes);
-                       break;

                case CMD_ICLASS_EML_MEMSET:
                        emlSet(c->d.asBytes,c->arg[0], c->arg[1]);
                        break;
                case CMD_ICLASS_WRITEBLOCK:
                        iClass_WriteBlock(c->arg[0], c->d.asBytes);
                        break;
                case CMD_ICLASS_EML_MEMSET:
                        emlSet(c->d.asBytes,c->arg[0], c->arg[1]);
                        break;
                case CMD_ICLASS_WRITEBLOCK:
                        iClass_WriteBlock(c->arg[0], c->d.asBytes);
                        break;

-               case CMD_ICLASS_READCHECK:  // auth step 1
-                       iClass_ReadCheck(c->arg[0], c->arg[1]);
-                       break;

                case CMD_ICLASS_READBLOCK:
                        iClass_ReadBlk(c->arg[0]);
                        break;
                case CMD_ICLASS_READBLOCK:
                        iClass_ReadBlk(c->arg[0]);
                        break;

-               case CMD_ICLASS_AUTHENTICATION: //check
-                       iClass_Authentication(c->d.asBytes);
+               case CMD_ICLASS_CHECK:
+                       iClass_Check(c->d.asBytes);
+                       break;
+               case CMD_ICLASS_READCHECK:
+                       iClass_Readcheck(c->arg[0], c->arg[1]);

                        break;
                case CMD_ICLASS_DUMP:
                        iClass_Dump(c->arg[0], c->arg[1]);
                        break;
                case CMD_ICLASS_DUMP:
                        iClass_Dump(c->arg[0], c->arg[1]);


@@ -1323,11 +1283,16 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        iClass_Clone(c->arg[0], c->arg[1], c->d.asBytes);
                        break;
 #endif
                        iClass_Clone(c->arg[0], c->arg[1], c->d.asBytes);
                        break;
 #endif

+

 #ifdef WITH_HFSNOOP
                case CMD_HF_SNIFFER:
                        HfSnoop(c->arg[0], c->arg[1]);
                        break;
 #ifdef WITH_HFSNOOP
                case CMD_HF_SNIFFER:
                        HfSnoop(c->arg[0], c->arg[1]);
                        break;

+               case CMD_HF_PLOT:
+                       HfPlot();
+                       break;

 #endif
 #endif

+

 #ifdef WITH_SMARTCARD
                case CMD_SMART_ATR: {
                        SmartCardAtr();
 #ifdef WITH_SMARTCARD
                case CMD_SMART_ATR: {
                        SmartCardAtr();


@@ -1370,14 +1335,15 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        ListenReaderField(c->arg[0]);
                        break;
 
                        ListenReaderField(c->arg[0]);
                        break;
 

-               case CMD_FPGA_MAJOR_MODE_OFF:           // ## FPGA Control
+               case CMD_FPGA_MAJOR_MODE_OFF:       // ## FPGA Control
+                       LED_A_ON();

                        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
                        SpinDelay(200);
                        LED_D_OFF(); // LED D indicates field ON or OFF
                        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
                        SpinDelay(200);
                        LED_D_OFF(); // LED D indicates field ON or OFF

+                       LED_A_OFF();

                        break;
 
                case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K:
                        break;
 
                case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K:

-

                        LED_B_ON();
                        uint8_t *BigBuf = BigBuf_get_addr();
                        for(size_t i=0; i<c->arg[1]; i += USB_CMD_DATA_SIZE) {
                        LED_B_ON();
                        uint8_t *BigBuf = BigBuf_get_addr();
                        for(size_t i=0; i<c->arg[1]; i += USB_CMD_DATA_SIZE) {


@@ -1391,8 +1357,8 @@ void UsbPacketReceived(uint8_t *packet, int len)
 
                case CMD_DOWNLOADED_SIM_SAMPLES_125K: {
                        // iceman; since changing fpga_bitstreams clears bigbuff, Its better to call it before.
 
                case CMD_DOWNLOADED_SIM_SAMPLES_125K: {
                        // iceman; since changing fpga_bitstreams clears bigbuff, Its better to call it before.

-                       // to be able to use this one for uploading data to device 
-                       // arg1 = 0 upload for LF usage 
+                       // to be able to use this one for uploading data to device
+                       // arg1 = 0 upload for LF usage

                        //        1 upload for HF usage
                        if (c->arg[1] == 0)
                                FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
                        //        1 upload for HF usage
                        if (c->arg[1] == 0)
                                FpgaDownloadAndGo(FPGA_BITSTREAM_LF);


@@ -1403,7 +1369,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        memcpy(b+c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);
                        cmd_send(CMD_ACK,0,0,0,0,0);
                        break;
                        memcpy(b+c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);
                        cmd_send(CMD_ACK,0,0,0,0,0);
                        break;

-               }       
+               }

                case CMD_READ_MEM:
                        ReadMem(c->arg[0]);
                        break;
                case CMD_READ_MEM:
                        ReadMem(c->arg[0]);
                        break;


@@ -1463,7 +1429,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_DEVICE_INFO: {
                        uint32_t dev_info = DEVICE_INFO_FLAG_OSIMAGE_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_OS;
                        if(common_area.flags.bootrom_present) dev_info |= DEVICE_INFO_FLAG_BOOTROM_PRESENT;
                case CMD_DEVICE_INFO: {
                        uint32_t dev_info = DEVICE_INFO_FLAG_OSIMAGE_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_OS;
                        if(common_area.flags.bootrom_present) dev_info |= DEVICE_INFO_FLAG_BOOTROM_PRESENT;

-                       cmd_send(CMD_DEVICE_INFO,dev_info,0,0,0,0);     
+                       cmd_send_old(CMD_DEVICE_INFO,dev_info,0,0,0,0);

                        break;
                }
                default:
                        break;
                }
                default:


@@ -1472,8 +1438,9 @@ void UsbPacketReceived(uint8_t *packet, int len)
        }
 }
 
        }
 }
 

-void  __attribute__((noreturn)) AppMain(void)
-{
+
+void  __attribute__((noreturn)) AppMain(void) {
+

        SpinDelay(100);
        clear_trace();
        if(common_area.magic != COMMON_AREA_MAGIC || common_area.version != 1) {
        SpinDelay(100);
        clear_trace();
        if(common_area.magic != COMMON_AREA_MAGIC || common_area.version != 1) {


@@ -1484,10 +1451,7 @@ void  __attribute__((noreturn)) AppMain(void)
        }
        common_area.flags.osimage_present = 1;
 
        }
        common_area.flags.osimage_present = 1;
 

-       LED_D_OFF();
-       LED_C_OFF();
-       LED_B_OFF();
-       LED_A_OFF();
+       LEDsoff();

 
        // Init USB device
        usb_enable();
 
        // Init USB device
        usb_enable();


@@ -1511,34 +1475,26 @@ void  __attribute__((noreturn)) AppMain(void)
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 
        StartTickCount();
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 
        StartTickCount();

-       
+

 #ifdef WITH_LCD
        LCDInit();
 #endif
 
 #ifdef WITH_LCD
        LCDInit();
 #endif
 

-  byte_t rx[sizeof(UsbCommand)];
-       size_t rx_len;
+       UsbCommand rx;

   
        for(;;) {
   
        for(;;) {

-    if (usb_poll()) {
-      rx_len = usb_read(rx,sizeof(UsbCommand));
-      if (rx_len) {
-        UsbPacketReceived(rx,rx_len);
-      }
-    }

                WDT_HIT();
                WDT_HIT();

-
-#ifdef WITH_LF_StandAlone
-#ifndef WITH_ISO14443a_StandAlone
-               if (BUTTON_HELD(1000) > 0)
-                       SamyRun();
-#endif
-#endif
-#ifdef WITH_ISO14443a
-#ifdef WITH_ISO14443a_StandAlone
-               if (BUTTON_HELD(1000) > 0)
-                       StandAloneMode14a();
+               if (cmd_receive(&rx)) {
+                       UsbPacketReceived(&rx);
+               } else {
+#if defined(WITH_LF_StandAlone) && !defined(WITH_ISO14443a_StandAlone)
+                       if (BUTTON_HELD(1000) > 0)
+                               SamyRun();

 #endif
 #endif

+#if defined(WITH_ISO14443a) && defined(WITH_ISO14443a_StandAlone)
+                       if (BUTTON_HELD(1000) > 0)
+                               StandAloneMode14a();

 #endif
 #endif

+               }

        }
 }
        }
 }