#!/bin/bash
# Some things for you to configure
+BINUTILS_VER="2.19.1"
+GCC_VER="4.3.3"
+GDB_VER="6.8"
+NEWLIB_VER="1.17.0"
+GMP_VER="4.2.4"
+MPFR_VER="2.4.1"
+INSIGHT_VER="6.8"
# Where you want to install the tools
-DESTDIR=/usr/local/gnuarm-4.3.0
+if [ "${1}" = "" ]; then
+ echo "Syntax: ${0} </installation/target/directory> [download & build directory (default ${PWD})]"
+ exit 1
+else
+ DESTDIR="${1}"
+fi
# Where do you want to build the tools. This is where the log files
# will be written (which you can monitor with 'tail' during compilation).
# You can delete this directory after everything is done.
-SRCDIR="/home/lafargue/Documents/Hobbies/RFID/Toolchain/linux"
+if [ ! "${2}" = "" ]; then
+ SRCDIR="${2}"
+else
+ SRCDIR="${PWD}"
+fi
+BUILDDIR=${SRCDIR}/build-gnuarm4
# Where to get each of the toolchain components
-BINUTILS=ftp://ftp.gnu.org/gnu/binutils/binutils-2.18.tar.bz2
-GCCCORE=ftp://ftp.gnu.org/gnu/gcc/gcc-4.3.0/gcc-core-4.3.0.tar.bz2
-GPP=ftp://ftp.gnu.org/gnu/gcc/gcc-4.3.0/gcc-g++-4.3.0.tar.bz2
-NEWLIB=ftp://sources.redhat.com/pub/newlib/newlib-1.16.0.tar.gz
-#INSIGHT=ftp://sourceware.org/pub/insight/releases/insight-6.8.tar.bz2
-INSIGHT=http://mirrors.kernel.org/sources.redhat.com/insight/releases/insight-6.8.tar.bz2
-#INSIGHT=http://www.mirrorservice.org/sites/sources.redhat.com/pub/insight/releases/insight-6.8.tar.bz2
+BINUTILS=ftp://gcc.gnu.org/pub/binutils/releases/binutils-${BINUTILS_VER}.tar.bz2
+GCCCORE=ftp://gcc.gnu.org/pub/gcc/releases/gcc-${GCC_VER}/gcc-core-${GCC_VER}.tar.bz2
+GPP=ftp://gcc.gnu.org/pub/gcc/releases/gcc-${GCC_VER}/gcc-g++-${GCC_VER}.tar.bz2
+NEWLIB=ftp://sources.redhat.com/pub/newlib/newlib-${NEWLIB_VER}.tar.gz
+#INSIGHT=ftp://sourceware.org/pub/insight/releases/insight-${INSIGHT_VER}.tar.bz2
+INSIGHT=http://mirrors.kernel.org/sources.redhat.com/insight/releases/insight-${INSIGHT_VER}.tar.bz2
+#INSIGHT=http://www.mirrorservice.org/sites/sources.redhat.com/pub/insight/releases/insight-${INSIGHT_VER}.tar.bz2
+GDB=ftp://sourceware.org/pub/gdb/releases/gdb-${GDB_VER}.tar.bz2
+GMP=http://ftp.sunet.se/pub/gnu/gmp/gmp-${GMP_VER}.tar.bz2
+MPFR=http://www.mpfr.org/mpfr-current/mpfr-${MPFR_VER}.tar.bz2
# Common configuration options (i.e., things to pass to 'configure')
COMMON_CFG="--enable-interwork --target=arm-elf --program-prefix=arm-elf- --prefix=${DESTDIR} --disable-werror --enable-languages=c,c++ --enable-multilib --disable-shared"
# Extra configuration options for each toolchain component
BINUTILS_CFG=
-GCCCORE_CFG="--disable-libssp --disable-threads --with-newlib" # Not sure about these last 2 options...there to try to make C++ support work
+GCCCORE_CFG="--disable-nls --disable-threads --with-gcc --with-gnu-ld --with-gnu-as --with-dwarf2 --with-newlib --with-headers=../newlib-${NEWLIB_VER}/newlib/libc/include --disable-libssp --disable-libstdcxx-pch --disable-libmudflap --disable-libgomp -v"
NEWLIB_CFG=
INSIGHT_CFG=
+GDB_CFG=
+
+# Make flags
+MAKEFLAGS="-j 4"
+
+# wget options
+# -nv: non-verbose but not too quiet (still print errors/warnings)
+# -nc: no-clobber, do not download a file that already exists
+# -t 0: retry indefinitely
+# -a wget.log: append errors/warnings to wget.log file
+# -c continue
+#WGET_OPTS="-nv -nc -t 0 -a wget.log"
+WGET_OPTS="-c -t 0"
# Compiler flags for compiling Newlib (-O2 is already hard-coded)
NEWLIB_FLAGS="-march=armv4t -mcpu=arm7tdmi -g"
############################################################################
if [[ `whoami` != "root" ]]; then
- echo You must be root to run this script
- exit 1
+ echo "*** Warning! Not running as root!"
+ echo "Installation may fail if you do not have appropriate permissions!"
fi
-mkdir -p ${SRCDIR}
+mkdir -p ${BUILDDIR}
cd ${SRCDIR}
-if [[ -f `basename ${BINUTILS}` ]]; then
- echo Looks like BINUTILS has already been downloaded.
-else
- echo Now downloading BINUTILS...
- # -nv: non-verbose but not too quiet (still print errors/warnings)
- # -nc: no-clobber, do not download a file that already exists
- # -t 0: retry indefinitely
- # -a wget.log: append errors/warnings to wget.log file
- wget -nv -nc -t 0 -a wget.log ${BINUTILS}
-fi
+echo Now downloading BINUTILS...
+wget ${WGET_OPTS} ${BINUTILS}
-if [[ -f `basename ${GCCCORE}` ]]; then
- echo Looks like GCC has already been downloaded.
-else
- echo Now downloading GCC...
- wget -nv -nc -t 0 -a wget.log ${GCCCORE}
-fi
+echo Now downloading GCC...
+wget ${WGET_OPTS} ${GCCCORE}
-if [[ -f `basename ${GPP}` ]]; then
- echo Looks like G++ has already been downloaded.
-else
- echo Now downloading G++...
- wget -nv -nc -t 0 -a wget.log ${GPP}
-fi
+echo Now downloading G++...
+wget ${WGET_OPTS} ${GPP}
-if [[ -f `basename ${NEWLIB}` ]]; then
- echo Looks like NEWLIB has already been downloaded.
-else
- echo Now downloading NEWLIB...
- wget -nv -nc -t 0 -a wget.log ${NEWLIB}
-fi
+echo Now downloading NEWLIB...
+wget ${WGET_OPTS} ${NEWLIB}
-if [[ -f `basename ${INSIGHT}` ]]; then
- echo Looks like INSIGHT has already been downloaded.
-else
- echo Now downloading INSIGHT...
- wget -nv -nc -t 0 -a wget.log ${INSIGHT}
-fi
+echo Now downloading INSIGHT...
+wget ${WGET_OPTS} ${INSIGHT}
+
+echo Now downloading GDB...
+wget ${WGET_OPTS} ${GDB}
+
+echo Now downloading GMP...
+wget ${WGET_OPTS} ${GMP}
+
+echo Now downloading MPFR...
+wget ${WGET_OPTS} ${MPFR}
+cd ${BUILDDIR}
if [[ -f binutils.built ]]; then
echo Looks like BINUTILS was already built.
else
echo Building BINUTILS...
- tar -xjf `basename ${BINUTILS}`
+ tar -xjf ../`basename ${BINUTILS}`
echo ___________________ > make.log
echo Building binutils... >> make.log
cd `find . -maxdepth 1 -type d -name 'binutils*'`
mkdir gnuarm
cd gnuarm
../configure ${COMMON_CFG} ${BINUTILS_CFG} >> ../../make.log 2>&1
- make MAKEINFO=`which makeinfo` >> ../../make.log 2>&1
+ make ${MAKEFLAGS} MAKEINFO=`which makeinfo` >> ../../make.log 2>&1
make install >> ../../make.log 2>&1
cd ../..
touch binutils.built
echo Looks like GCC was already built.
else
echo Building GCC...
- tar -xjf `basename ${GCCCORE}`
- tar -xjf `basename ${GPP}`
+ tar -xjf ../`basename ${GCCCORE}`
+ tar -xjf ../`basename ${GPP}`
+ tar -xjf ../`basename ${GMP}`
+ ln -s "${BUILDDIR}/gmp-${GMP_VER}" "${BUILDDIR}/gcc-${GCC_VER}/gmp"
+ tar -xjf ../`basename ${MPFR}`
+ ln -s "${BUILDDIR}/mpfr-${MPFR_VER}" "${BUILDDIR}/gcc-${GCC_VER}/mpfr"
+
echo ___________________ >> make.log
cat << EOF > gcc.patch
---- gcc-4.2.2.orig/gcc/config/arm/t-arm-elf 2006-11-06 13:13:53.000000000 +0100
-+++ gcc-4.2.2.mod/gcc/config/arm/t-arm-elf 2007-10-05 12:13:00.000000000 +0200
-@@ -23,8 +23,8 @@
+--- gcc-4.3.3.orig/gcc/config/arm/t-arm-elf
++++ gcc-4.3.3.mod/gcc/config/arm/t-arm-elf
+@@ -33,8 +33,8 @@
# MULTILIB_DIRNAMES += fpu soft
# MULTILIB_EXCEPTIONS += *mthumb/*mhard-float*
#
mkdir gnuarm
cd gnuarm
../configure ${COMMON_CFG} ${GCCCORE_CFG} >> ../../make.log 2>&1
- make >> ../../make.log 2>&1
+ make ${MAKEFLAGS} all-gcc >> ../../make.log 2>&1
make install >> ../../make.log 2>&1
cd ../..
touch gcc.built
echo Looks like NEWLIB was already built.
else
echo Building NEWLIB...
- tar -xzf `basename ${NEWLIB}`
+ tar -xzf ../`basename ${NEWLIB}`
echo ___________________ >> make.log
echo Building newlib... >> make.log
cd `find . -maxdepth 1 -type d -name 'newlib*'`
# This line adds our NEWLIB_CFLAGS to the configure.host file in the
# newlib subdirectory. This is the only way I could find to tell Newlib to
# compile itself with the -mmarch=armv4t and -mcpu=arm7tdmi flags.
- sed -i "/^newlib_cflags=/s/=.*\$/=\"${NEWLIB_FLAGS}\"/" ../newlib/configure.host
- make >> ../../make.log 2>&1
+# sed -i "/^newlib_cflags=/s/=.*\$/=\"${NEWLIB_FLAGS}\"/" ../newlib/configure.host
+ make ${MAKEFLAGS} >> ../../make.log 2>&1
make install >> ../../make.log 2>&1
cd ../..
touch newlib.built
echo "Now that newlib is built, second pass for GCC..." >> make.log
cd `find . -maxdepth 1 -type d -name 'gcc*'`
cd gnuarm
- make >> ../../make.log 2>&1
+ make ${MAKEFLAGS} >> ../../make.log 2>&1
make install >> ../../make.log 2>&1
cd ../..
echo Looks like INSIGHT was already built.
else
echo Building INSIGHT...
- tar -xjf `basename ${INSIGHT}`
+ tar -xjf ../`basename ${INSIGHT}`
echo ___________________ >> make.log
echo Building insight... >> make.log
cd `find . -maxdepth 1 -type d -name 'insight*'`
mkdir gnuarm
cd gnuarm
../configure ${COMMON_CFG} ${INSIGHT_CFG} >> ../../make.log 2>&1
- make >> ../../make.log 2>&1
+ make ${MAKEFLAGS} >> ../../make.log 2>&1
make install >> ../../make.log 2>&1
cd ../..
touch insight.built
fi
+if [[ -f gdb.built ]]; then
+ echo Looks like GDB was already built.
+else
+ echo Building GDB...
+ tar -xjf ../`basename ${GDB}`
+ echo ___________________ >> make.log
+ echo Building insight... >> make.log
+ cd `find . -maxdepth 1 -type d -name 'gdb*'`
+ mkdir gnuarm
+ cd gnuarm
+ ../configure ${COMMON_CFG} ${GDB_CFG} >> ../../make.log 2>&1
+ make ${MAKEFLAGS} >> ../../make.log 2>&1
+ make install >> ../../make.log 2>&1
+ cd ../..
+ touch gdb.built
+fi
+
echo ___________________ >> make.log
echo Build complete. >> make.log
cd ${DESTDIR}
chmod -R a+rX .
+echo Downloaded archives are in ${SRCDIR}
+echo build driectory: ${BUILDDIR}
+echo set environment variable ARMLIB to ${DESTDIR}/lib/gcc/arm-elf/4.3.3/interwork for Makefile.linux
exit 0
projects / proxmark3-svn / blobdiff