05 = REQB
1D = ATTRIB
50 = HALT
+
+ BA = PING (reader -> tag)
+ AB = PONG (tag -> reader)
SRIX4K (tag does not respond to 05)
06 00 = INITIATE
0E xx = SELECT ID (xx = Chip-ID)
BA = Enable Privacy
BB = 64bit Password Protection
40 = Long Range CMD (Standard ISO/TR7003:1990)
- */
+
+ISO 7816-4 Basic interindustry commands. For command APDU's.
+ B0 = READ BINARY
+ D0 = WRITE BINARY
+ D6 = UPDATE BINARY
+ 0E = ERASE BINARY
+ B2 = READ RECORDS
+ D2 = WRITE RECORDS
+ E2 = APPEND RECORD
+ DC = UPDATE RECORD
+ CA = GET DATA
+ DA = PUT DATA
+ A4 = SELECT FILE
+ 20 = VERIFY
+ 88 = INTERNAL AUTHENTICATION
+ 82 = EXTERNAL AUTHENTICATION
+ B4 = GET CHALLENGE
+ 70 = MANAGE CHANNEL
+
+ For response APDU's
+ 90 00 = OK
+ 6x xx = ERROR
+*/
#define ICLASS_CMD_ACTALL 0x0A
#define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
#define ISO14443A_CMD_WUPA 0x52
#define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93
#define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95
-#define ISO14443A_CMD_WRITEBLOCK 0xA0 // or 0xA2 ?
+#define ISO14443A_CMD_WRITEBLOCK 0xA0
#define ISO14443A_CMD_HALT 0x50
#define ISO14443A_CMD_RATS 0xE0
#define MIFARE_CMD_RESTORE 0xC2
#define MIFARE_CMD_TRANSFER 0xB0
-#define MIFARE_ULC_WRITE 0xA2
-//#define MIFARE_ULC__COMP_WRITE 0xA0
+#define MIFARE_EV1_PERSONAL_UID 0x40
+#define MIFARE_EV1_SETMODE 0x43
+
+
+#define MIFARE_ULC_WRITE 0xA2
+//#define MIFARE_ULC__COMP_WRITE 0xA0
#define MIFARE_ULC_AUTH_1 0x1A
#define MIFARE_ULC_AUTH_2 0xAF
#define MIFARE_ULEV1_CHECKTEAR 0x3E
#define MIFARE_ULEV1_VCSL 0x4B
+
+// Magic Generation 1, parameter "work flags"
+// bit 0 - need get UID
+// bit 1 - send wupC (wakeup chinese)
+// bit 2 - send HALT cmd after sequence
+// bit 3 - turn on FPGA
+// bit 4 - turn off FPGA
+// bit 5 - set datain instead of issuing USB reply (called via ARM for StandAloneMode14a)
+#define MAGIC_UID 0x01
+#define MAGIC_WUPC 0x02
+#define MAGIC_HALT 0x04
+#define MAGIC_INIT 0x08
+#define MAGIC_OFF 0x10
+#define MAGIC_DATAIN 0x20
+#define MAGIC_WIPE 0x40
+#define MAGIC_SINGLE (MAGIC_WUPC | MAGIC_HALT | MAGIC_INIT | MAGIC_OFF) //0x1E
+
/**
06 00 = INITIATE
0E xx = SELECT ID (xx = Chip-ID)
#define ISO14443B_RESET 0x0C
#define ISO14443B_COMPLETION 0x0F
#define ISO14443B_AUTHENTICATE 0x0A
+#define ISO14443B_PING 0xBA
+#define ISO14443B_PONG 0xAB
//First byte is 26
#define ISO15693_INVENTORY 0x01
#define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes)
-#define ISO_14443A 0
-#define ICLASS 1
-#define ISO_14443B 2
+#define ISO_14443A 0
+#define ICLASS 1
+#define ISO_14443B 2
#define TOPAZ 3
+#define ISO_7816_4 4
//-- Picopass fuses
#define FUSE_FPERS 0x80
#define FUSE_FPROD0 0x02
#define FUSE_RA 0x01
+// ISO 7816-4 Basic interindustry commands. For command APDU's.
+#define ISO7816_READ_BINARY 0xB0
+#define ISO7816_WRITE_BINARY 0xD0
+#define ISO7816_UPDATE_BINARY 0xD6
+#define ISO7816_ERASE_BINARY 0x0E
+#define ISO7816_READ_RECORDS 0xB2
+#define ISO7816_WRITE_RECORDS 0xD2
+#define ISO7816_APPEND_RECORD 0xE2
+#define ISO7816_UPDATE_RECORD 0xDC
+#define ISO7816_GET_DATA 0xCA
+#define ISO7816_PUT_DATA 0xDA
+#define ISO7816_SELECT_FILE 0xA4
+#define ISO7816_VERIFY 0x20
+#define ISO7816_INTERNAL_AUTHENTICATION 0x88
+#define ISO7816_EXTERNAL_AUTHENTICATION 0x82
+#define ISO7816_GET_CHALLENGE 0xB4
+#define ISO7816_MANAGE_CHANNEL 0x70
+// ISO7816-4 For response APDU's
+#define ISO7816_OK 0x9000
+// 6x xx = ERROR
+
void printIclassDumpInfo(uint8_t* iclass_dump);
+void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);
+
+/* T55x7 configuration register definitions */
+#define T55x7_POR_DELAY 0x00000001
+#define T55x7_ST_TERMINATOR 0x00000008
+#define T55x7_PWD 0x00000010
+#define T55x7_MAXBLOCK_SHIFT 5
+#define T55x7_AOR 0x00000200
+#define T55x7_PSKCF_RF_2 0
+#define T55x7_PSKCF_RF_4 0x00000400
+#define T55x7_PSKCF_RF_8 0x00000800
+#define T55x7_MODULATION_DIRECT 0
+#define T55x7_MODULATION_PSK1 0x00001000
+#define T55x7_MODULATION_PSK2 0x00002000
+#define T55x7_MODULATION_PSK3 0x00003000
+#define T55x7_MODULATION_FSK1 0x00004000
+#define T55x7_MODULATION_FSK2 0x00005000
+#define T55x7_MODULATION_FSK1a 0x00006000
+#define T55x7_MODULATION_FSK2a 0x00007000
+#define T55x7_MODULATION_MANCHESTER 0x00008000
+#define T55x7_MODULATION_BIPHASE 0x00010000
+#define T55x7_MODULATION_DIPHASE 0x00018000
+#define T55x7_BITRATE_RF_8 0
+#define T55x7_BITRATE_RF_16 0x00040000
+#define T55x7_BITRATE_RF_32 0x00080000
+#define T55x7_BITRATE_RF_40 0x000C0000
+#define T55x7_BITRATE_RF_50 0x00100000
+#define T55x7_BITRATE_RF_64 0x00140000
+#define T55x7_BITRATE_RF_100 0x00180000
+#define T55x7_BITRATE_RF_128 0x001C0000
+
+/* T5555 (Q5) configuration register definitions */
+#define T5555_ST_TERMINATOR 0x00000001
+#define T5555_MAXBLOCK_SHIFT 0x00000001
+#define T5555_MODULATION_MANCHESTER 0
+#define T5555_MODULATION_PSK1 0x00000010
+#define T5555_MODULATION_PSK2 0x00000020
+#define T5555_MODULATION_PSK3 0x00000030
+#define T5555_MODULATION_FSK1 0x00000040
+#define T5555_MODULATION_FSK2 0x00000050
+#define T5555_MODULATION_BIPHASE 0x00000060
+#define T5555_MODULATION_DIRECT 0x00000070
+#define T5555_INVERT_OUTPUT 0x00000080
+#define T5555_PSK_RF_2 0
+#define T5555_PSK_RF_4 0x00000100
+#define T5555_PSK_RF_8 0x00000200
+#define T5555_USE_PWD 0x00000400
+#define T5555_USE_AOR 0x00000800
+#define T5555_BITRATE_SHIFT 12 //(RF=2n+2) ie 64=2*0x1F+2 or n = (RF-2)/2
+#define T5555_FAST_WRITE 0x00004000
+#define T5555_PAGE_SELECT 0x00008000
+
+uint32_t GetT55xxClockBit(uint32_t clock);
-#endif // PROTOCOLS_H
+#endif
+// PROTOCOLS_H
projects / proxmark3-svn / blobdiff