iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
clear_trace();\r
+ set_tracing(true);\r
\r
LED_A_ON();\r
LED_B_OFF();\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
clear_trace();\r
+ set_tracing(true);\r
\r
if(!iso14443a_select_card(NULL, NULL, NULL, true, 0)) {\r
if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card");\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
clear_trace();\r
+ set_tracing(true);\r
\r
int len = iso14443a_select_card(NULL, NULL, NULL, true, 0);\r
if(!len) {\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
clear_trace();\r
-\r
+ set_tracing(true);\r
+ \r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
// free eventually allocated BigBuf memory\r
BigBuf_free();\r
clear_trace();\r
-\r
+ set_tracing(true);\r
+ \r
// params\r
uint8_t blockNo = arg0;\r
uint16_t blocks = arg1;\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
clear_trace();\r
-\r
+ set_tracing(true);\r
+ \r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
LED_A_ON(); LED_B_OFF(); LED_C_OFF();\r
\r
clear_trace();\r
+ set_tracing(true);\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
if(!iso14443a_select_card(uid, NULL, NULL, true, 0)) {\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
clear_trace();\r
-\r
+ set_tracing(true);\r
+ \r
if(!iso14443a_select_card(NULL, NULL, NULL, true, 0)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");\r
OnError(0);\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
clear_trace();\r
-\r
+ set_tracing(true);\r
+ \r
if(!iso14443a_select_card(NULL, NULL, NULL, true, 0)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");\r
OnError(0);\r
uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE] = {0x00};\r
\r
uint32_t auth1_time, auth2_time;\r
- static uint16_t delta_time;\r
+ static uint16_t delta_time = 0;\r
\r
LED_A_ON();\r
LED_C_OFF();\r
rtr--;\r
continue;\r
};\r
+ auth2_time = (delta_time) ? auth1_time + delta_time : 0;\r
\r
- if (delta_time) {\r
- auth2_time = auth1_time + delta_time;\r
- } else {\r
- auth2_time = 0;\r
- }\r
if(mifare_classic_authex(pcs, cuid, blockNo, keyType, ui64Key, AUTH_NESTED, &nt2, &auth2_time)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Nested: Auth2 error");\r
rtr--;\r
\r
nttmp = prng_successor(nt1, 100); //NXP Mifare is typical around 840,but for some unlicensed/compatible mifare card this can be 160\r
for (i = 101; i < 1200; i++) {\r
- nttmp = prng_successor(nttmp, 1);\r
+ nttmp = prng_successor_one(nttmp);\r
if (nttmp == nt2) break;\r
}\r
\r
\r
// nested authentication\r
auth2_time = auth1_time + delta_time;\r
+\r
len = mifare_sendcmd_short(pcs, AUTH_NESTED, 0x60 + (targetKeyType & 0x01), targetBlockNo, receivedAnswer, par, &auth2_time);\r
if (len != 4) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Nested: Auth2 error len=%d", len);\r
if (MF_DBGLEVEL >= 3) Dbprintf("Nonce#%d: Testing nt1=%08x nt2enc=%08x nt2par=%02x", i+1, nt1, nt2, par[0]);\r
\r
// Parity validity check\r
- for (j = 0; j < 4; j++) {\r
- par_array[j] = (oddparity8(receivedAnswer[j]) != ((par[0] >> (7-j)) & 0x01));\r
- }\r
+// for (j = 0; j < 4; j++) {\r
+// par_array[j] = (oddparity8(receivedAnswer[j]) != ((par[0] >> (7-j)) & 0x01));\r
+// }\r
+ par_array[0] = (oddparity8(receivedAnswer[0]) != ((par[0] >> (7-0)) & 0x01));\r
+ par_array[1] = (oddparity8(receivedAnswer[1]) != ((par[0] >> (7-1)) & 0x01));\r
+ par_array[2] = (oddparity8(receivedAnswer[2]) != ((par[0] >> (7-2)) & 0x01));\r
+ par_array[3] = (oddparity8(receivedAnswer[3]) != ((par[0] >> (7-3)) & 0x01));\r
\r
ncount = 0;\r
nttest = prng_successor(nt1, dmin - 1);\r
for (j = dmin; j < dmax + 1; j++) {\r
- nttest = prng_successor(nttest, 1);\r
+ nttest = prng_successor_one(nttest);\r
ks1 = nt2 ^ nttest;\r
\r
if (valid_nonce(nttest, nt2, ks1, par_array)){\r
// ----------------------------- crypto1 destroy\r
crypto1_destroy(pcs);\r
\r
- byte_t buf[4 + 4 * 4];\r
+ byte_t buf[4 + 4 * 4] = {0};\r
memcpy(buf, &cuid, 4);\r
memcpy(buf+4, &target_nt[0], 4);\r
memcpy(buf+8, &target_ks[0], 4);\r
int OLD_MF_DBGLEVEL = MF_DBGLEVEL; \r
MF_DBGLEVEL = MF_DBG_NONE;\r
\r
+ LEDsoff();\r
LED_A_ON();\r
- LED_B_OFF();\r
- LED_C_OFF();\r
+ \r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
- if (clearTrace) clear_trace();\r
+ if (clearTrace) \r
+ clear_trace();\r
+ \r
set_tracing(TRUE);\r
\r
- for (i = 0; i < keyCount; i++) {\r
- if(mifare_classic_halt(pcs, cuid)) {\r
- if (MF_DBGLEVEL >= 1) Dbprintf("ChkKeys: Halt error");\r
- }\r
+ for (i = 0; i < keyCount; ++i) {\r
\r
- if(!iso14443a_select_card(uid, NULL, &cuid, true, 0)) {\r
+ if (!iso14443a_select_card(uid, NULL, &cuid, true, 0)) {\r
if (OLD_MF_DBGLEVEL >= 1) Dbprintf("ChkKeys: Can't select card");\r
break;\r
- };\r
+ }\r
\r
ui64Key = bytes_to_num(datain + i * 6, 6);\r
- if(mifare_classic_auth(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST)) {\r
+ if (mifare_classic_auth(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST)) {\r
+ if (mifare_classic_halt(pcs, cuid))\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("ChkKeys: Halt error");\r
continue;\r
- };\r
+ }\r
\r
isOK = 1;\r
break;\r
}\r
\r
- // ----------------------------- crypto1 destroy\r
- crypto1_destroy(pcs);\r
- \r
LED_B_ON();\r
cmd_send(CMD_ACK,isOK,0,0,datain + i * 6,6);\r
- LED_B_OFF();\r
\r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
LEDsoff();\r
set_tracing(FALSE);\r
+ crypto1_destroy(pcs);\r
\r
// restore debug level\r
MF_DBGLEVEL = OLD_MF_DBGLEVEL; \r
uint8_t workFlags = arg0;\r
uint8_t blockNo = arg1;\r
\r
- Dbprintf("ICE :: CSetBlocks Flags %02x", workFlags);\r
- \r
// variables\r
+ bool isOK = false; //assume we will get an error\r
+ uint8_t errormsg = 0x00;\r
uint8_t uid[10] = {0x00};\r
uint8_t data[18] = {0x00};\r
uint32_t cuid = 0;\r
\r
- uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE];\r
- uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE];\r
+ uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE] = {0x00};\r
+ uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE] = {0x00};\r
\r
if (workFlags & MAGIC_INIT) {\r
LED_A_ON();\r
set_tracing(TRUE);\r
}\r
\r
- // read UID and return to client\r
- if (workFlags & MAGIC_UID) {\r
- if(!iso14443a_select_card(uid, NULL, &cuid, true, 0)) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card");\r
- OnErrorMagic(MAGIC_UID);\r
+ //loop doesn't loop just breaks out if error\r
+ while (true) {\r
+ // read UID and return to client with write\r
+ if (workFlags & MAGIC_UID) {\r
+ if(!iso14443a_select_card(uid, NULL, &cuid, true, 0)) {\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card");\r
+ errormsg = MAGIC_UID;\r
+ // break;\r
+ }\r
+ \r
+ if ( mifare_classic_halt_ex(NULL) ) break;\r
}\r
- }\r
\r
- // wipe tag, fill it with zeros\r
- if (workFlags & MAGIC_WIPE){\r
- ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
- if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wupC1 error");\r
- OnErrorMagic(MAGIC_WIPE);\r
- }\r
+ // wipe tag, fill it with zeros\r
+ if (workFlags & MAGIC_WIPE){\r
+ ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
+ if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wupC1 error");\r
+ errormsg = MAGIC_WIPE;\r
+ break;\r
+ }\r
\r
- ReaderTransmit(wipeC, sizeof(wipeC), NULL);\r
- if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wipeC error");\r
- OnErrorMagic(MAGIC_WIPE);\r
- }\r
- } \r
+ ReaderTransmit(wipeC, sizeof(wipeC), NULL);\r
+ if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wipeC error");\r
+ errormsg = MAGIC_WIPE;\r
+ break;\r
+ }\r
\r
- // write block\r
- if (workFlags & MAGIC_WUPC) {\r
- ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
- if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wupC1 error");\r
- OnErrorMagic(MAGIC_WUPC);\r
- }\r
+ if ( mifare_classic_halt_ex(NULL) ) break;\r
+ } \r
\r
- ReaderTransmit(wupC2, sizeof(wupC2), NULL);\r
- if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wupC2 error");\r
- OnErrorMagic(MAGIC_WUPC);\r
+ // write block\r
+ if (workFlags & MAGIC_WUPC) {\r
+ ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
+ if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wupC1 error");\r
+ errormsg = MAGIC_WUPC;\r
+ break;\r
+ }\r
+\r
+ ReaderTransmit(wupC2, sizeof(wupC2), NULL);\r
+ if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wupC2 error");\r
+ errormsg = MAGIC_WUPC;\r
+ break;\r
+ }\r
}\r
- }\r
\r
- if ((mifare_sendcmd_short(NULL, 0, ISO14443A_CMD_WRITEBLOCK, blockNo, receivedAnswer, receivedAnswerPar, NULL) != 1) || (receivedAnswer[0] != 0x0a)) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("write block send command error");\r
- OnErrorMagic(4);\r
- }\r
- \r
- memcpy(data, datain, 16);\r
- AppendCrc14443a(data, 16);\r
+ if ((mifare_sendcmd_short(NULL, 0, ISO14443A_CMD_WRITEBLOCK, blockNo, receivedAnswer, receivedAnswerPar, NULL) != 1) || (receivedAnswer[0] != 0x0a)) {\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("write block send command error");\r
+ errormsg = 4;\r
+ break;\r
+ }\r
\r
- ReaderTransmit(data, sizeof(data), NULL);\r
- if ((ReaderReceive(receivedAnswer, receivedAnswerPar) != 1) || (receivedAnswer[0] != 0x0a)) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("write block send data error");\r
- OnErrorMagic(0);\r
- } \r
+ memcpy(data, datain, 16);\r
+ AppendCrc14443a(data, 16);\r
\r
- if (workFlags & MAGIC_OFF) \r
- mifare_classic_halt_ex(NULL);\r
+ ReaderTransmit(data, sizeof(data), NULL);\r
+ if ((ReaderReceive(receivedAnswer, receivedAnswerPar) != 1) || (receivedAnswer[0] != 0x0a)) {\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("write block send data error");\r
+ errormsg = 0;\r
+ break;\r
+ } \r
\r
- LED_B_ON();\r
- // check if uid is cuid?\r
- cmd_send(CMD_ACK,1,0,0,uid,sizeof(uid));\r
- LED_B_OFF();\r
+ if (workFlags & MAGIC_OFF) \r
+ if ( mifare_classic_halt_ex(NULL) ) break;\r
+ \r
+ isOK = true;\r
+ break;\r
+\r
+ } // end while \r
+\r
+ if (isOK )\r
+ cmd_send(CMD_ACK,1,0,0,uid,sizeof(uid));\r
+ else\r
+ OnErrorMagic(errormsg);\r
\r
if (workFlags & MAGIC_OFF)\r
OnSuccessMagic();\r
\r
uint8_t workFlags = arg0;\r
uint8_t blockNo = arg1;\r
-\r
+ uint8_t errormsg = 0x00;\r
+ bool isOK = false; //assume we will get an error\r
+ \r
// variables\r
uint8_t data[MAX_MIFARE_FRAME_SIZE];\r
- uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE];\r
- uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE];\r
+ uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE] = {0x00};\r
+ uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE] = {0x00};\r
\r
memset(data, 0x00, sizeof(data));\r
\r
set_tracing(TRUE);\r
}\r
\r
- if (workFlags & MAGIC_WUPC) {\r
- ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
- if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wupC1 error");\r
- OnErrorMagic(MAGIC_WUPC);\r
- }\r
+ //loop doesn't loop just breaks out if error or done\r
+ while (true) {\r
+ if (workFlags & MAGIC_WUPC) {\r
+ ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
+ if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wupC1 error");\r
+ errormsg = MAGIC_WUPC;\r
+ break;\r
+ }\r
\r
- ReaderTransmit(wupC2, sizeof(wupC2), NULL);\r
- if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wupC2 error");\r
- OnErrorMagic(MAGIC_WUPC);\r
+ ReaderTransmit(wupC2, sizeof(wupC2), NULL);\r
+ if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("wupC2 error");\r
+ errormsg = MAGIC_WUPC;\r
+ break;\r
+ }\r
}\r
- }\r
\r
- // read block \r
- if ((mifare_sendcmd_short(NULL, 0, ISO14443A_CMD_READBLOCK, blockNo, receivedAnswer, receivedAnswerPar, NULL) != 18)) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("read block send command error");\r
- OnErrorMagic(0);\r
+ // read block \r
+ if ((mifare_sendcmd_short(NULL, 0, ISO14443A_CMD_READBLOCK, blockNo, receivedAnswer, receivedAnswerPar, NULL) != 18)) {\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("read block send command error");\r
+ errormsg = 0;\r
+ break;\r
+ }\r
+ \r
+ memcpy(data, receivedAnswer, sizeof(data));\r
+ \r
+ // send HALT\r
+ if (workFlags & MAGIC_HALT) {\r
+ mifare_classic_halt_ex(NULL);\r
+ break;\r
+ }\r
+ isOK = true;\r
+ break;\r
}\r
- \r
- memcpy(data, receivedAnswer, sizeof(data));\r
- \r
- // send HALT\r
- if (workFlags & MAGIC_HALT) \r
- mifare_classic_halt_ex(NULL);\r
- \r
- LED_B_ON();\r
- \r
// if MAGIC_DATAIN, the data stays on device side.\r
- if (workFlags & MAGIC_DATAIN)\r
- memcpy(datain, data, sizeof(data));\r
- else\r
- cmd_send(CMD_ACK,1,0,0,data,sizeof(data));\r
+ if (workFlags & MAGIC_DATAIN) {\r
+ if (isOK)\r
+ memcpy(datain, data, sizeof(data));\r
+ } else {\r
+ if (isOK) \r
+ cmd_send(CMD_ACK,1,0,0,data,sizeof(data)); \r
+ else \r
+ OnErrorMagic(errormsg); \r
+ }\r
\r
- LED_B_OFF();\r
-\r
if (workFlags & MAGIC_OFF)\r
OnSuccessMagic();\r
}\r
\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
clear_trace();\r
+ set_tracing(true);\r
\r
int len = iso14443a_select_card(uid, NULL, &cuid, true, 0);\r
if(!len) {\r
projects / proxmark3-svn / blobdiff