fixed iso14443b snoop, plus compiling issue of redefined parameter, please take care...

[proxmark3-svn] / common / ldscript.common

diff --git a/common/ldscript.common b/common/ldscript.common
index e149b4524c63a85edc0474997c3cba0caf05e6da..7cde5891d5ef4e17c6649c55777a4f3129cff61f 100644 (file)
--- a/common/ldscript.common
+++ b/common/ldscript.common
@@ -11,18 +11,12 @@
 /* AT91SAM7S256 has 256k Flash and 64k RAM */
 MEMORY 
 {
 /* AT91SAM7S256 has 256k Flash and 64k RAM */
 MEMORY 
 {

-       /* Important note: this memory map has the correct origins for all the flash sections.
-          However, this will confuse the currently deployed flash code which expects logical and and not
-          physical addresses and performs no sanity checks at all. If confronted with physical addresses, 
-          it will happily erase everything and brick the device. So for the time being translate these addresses
-          down in the objcopy call while updating all the flash code with proper sanity checks, then come
-          back later and fix the addresses. -- Henryk Plötz <henryk@ploetzli.ch> 2009-08-27 */
-        bootphase1 : ORIGIN = 0x00100000, LENGTH = 0x200 /* Phase 1 bootloader: Copies real bootloader to RAM */
-        bootphase2 : ORIGIN = 0x00100200, LENGTH = 0x2000 - 0x200 /* Main bootloader code, stored in Flash, executed from RAM */
-        fpgaimage  : ORIGIN = 0x00102000, LENGTH = 64k - 0x2000 /* Place where the FPGA image will end up */
-        osimage    : ORIGIN = 0x00110000, LENGTH = 256K - 64k /* Place where the main OS will end up */
-        ram        : ORIGIN = 0x00200000, LENGTH = 64K - 0x20 /* RAM, minus small common area */
-        commonarea : ORIGIN = 0x00200000 + 64K - 0x20, LENGTH = 0x20 /* Communication between bootloader and main OS */
+       bootphase1 : ORIGIN = 0x00100000, LENGTH = 0x200             /* Phase 1 bootloader: Copies real bootloader to RAM */
+       bootphase2 : ORIGIN = 0x00100200, LENGTH = 0x2000 - 0x200    /* Main bootloader code, stored in Flash, executed from RAM */
+       fpgaimage  : ORIGIN = 0x00102000, LENGTH = 64k - 0x2000      /* Place where the FPGA image will end up */
+       osimage    : ORIGIN = 0x00110000, LENGTH = 256K - 64k        /* Place where the main OS will end up */
+       ram        : ORIGIN = 0x00200000, LENGTH = 64K - 0x20        /* RAM, minus small common area */
+       commonarea : ORIGIN = 0x00200000 + 64K - 0x20, LENGTH = 0x20 /* Communication between bootloader and main OS */

 }
 
 /* Export some information that can be used from within the firmware */
 }
 
 /* Export some information that can be used from within the firmware */