- // Zero-crossings aren't meaningful unless the signal is zero-mean.
- CmdHpf("");
-
- int sign = 1;
- int zc = 0;
- int lastZc = 0;
-
- for (int i = 0; i < GraphTraceLen; ++i) {
- if (GraphBuffer[i] * sign >= 0) {
- // No change in sign, reproduce the previous sample count.
- zc++;
- GraphBuffer[i] = lastZc;
- } else {
- // Change in sign, reset the sample count.
- sign = -sign;
- GraphBuffer[i] = lastZc;
- if (sign > 0) {
- lastZc = zc;
- zc = 0;
- }
- }
- }
-
- RepaintGraphWindow();
- return 0;
-}
-
-static command_t CommandTable[] =
-{
- {"help", CmdHelp, 1, "This help"},
- {"amp", CmdAmp, 1, "Amplify peaks"},
- {"askdemod", Cmdaskdemod, 1, "<0 or 1> -- Attempt to demodulate simple ASK tags"},
- {"askmandemod", Cmdaskmandemod, 1, "[clock] [invert <0|1>] -- Attempt to demodulate ASK/Manchester tags and output binary"},
- {"askrawdemod", Cmdaskrawdemod, 1, "[clock] [invert <0|1>] -- Attempt to demodulate ASK tags and output binary"},
- {"autocorr", CmdAutoCorr, 1, "<window length> -- Autocorrelation over window"},
- {"biphaserawdecode",CmdBiphaseDecodeRaw,1,"[offset] Biphase decode binary stream already in graph buffer (offset = bit to start decode from)"},
- {"bitsamples", CmdBitsamples, 0, "Get raw samples as bitstring"},
- {"bitstream", CmdBitstream, 1, "[clock rate] -- Convert waveform into a bitstream"},
- {"buffclear", CmdBuffClear, 1, "Clear sample buffer and graph window"},
- {"dec", CmdDec, 1, "Decimate samples"},
- {"detectaskclock",CmdDetectClockRate, 1, "Detect ASK clock rate"},
- {"fskdemod", CmdFSKdemod, 1, "Demodulate graph window as a HID FSK"},
- {"fskhiddemod", CmdFSKdemodHID, 1, "Demodulate graph window as a HID FSK using raw"},
- {"fskiodemod", CmdFSKdemodIO, 1, "Demodulate graph window as an IO Prox FSK using raw"},
- {"fskrawdemod", CmdFSKrawdemod, 1, "[clock rate] [invert] [rchigh] [rclow] Demodulate graph window from FSK to binary (clock = 50)(invert = 1 or 0)(rchigh = 10)(rclow=8)"},
- {"grid", CmdGrid, 1, "<x> <y> -- overlay grid on graph window, use zero value to turn off either"},
- {"hexsamples", CmdHexsamples, 0, "<bytes> [<offset>] -- Dump big buffer as hex bytes"},
- {"hide", CmdHide, 1, "Hide graph window"},
- {"hpf", CmdHpf, 1, "Remove DC offset from trace"},
- {"load", CmdLoad, 1, "<filename> -- Load trace (to graph window"},
- {"ltrim", CmdLtrim, 1, "<samples> -- Trim samples from left of trace"},
- {"rtrim", CmdRtrim, 1, "<location to end trace> -- Trim samples from right of trace"},
- {"mandemod", CmdManchesterDemod, 1, "[i] [clock rate] -- Manchester demodulate binary stream (option 'i' to invert output)"},
- {"manrawdecode", Cmdmandecoderaw, 1, "Manchester decode binary stream already in graph buffer"},
- {"manmod", CmdManchesterMod, 1, "[clock rate] -- Manchester modulate a binary stream"},
- {"norm", CmdNorm, 1, "Normalize max/min to +/-500"},
- {"plot", CmdPlot, 1, "Show graph window (hit 'h' in window for keystroke help)"},
- {"samples", CmdSamples, 0, "[512 - 40000] -- Get raw samples for graph window"},
- {"tune", CmdTuneSamples, 0, "Get hw tune samples for graph window"},
- {"save", CmdSave, 1, "<filename> -- Save trace (from graph window)"},
- {"scale", CmdScale, 1, "<int> -- Set cursor display scale"},
- {"threshold", CmdThreshold, 1, "<threshold> -- Maximize/minimize every value in the graph window depending on threshold"},
- {"zerocrossings", CmdZerocrossings, 1, "Count time between zero-crossings"},
- {"dirthreshold", CmdDirectionalThreshold, 1, "<thres up> <thres down> -- Max rising higher up-thres/ Min falling lower down-thres, keep rest as prev."},
- {NULL, NULL, 0, NULL}
+ // Zero-crossings aren't meaningful unless the signal is zero-mean.
+ CmdHpf("");
+
+ int sign = 1;
+ int zc = 0;
+ int lastZc = 0;
+
+ for (int i = 0; i < GraphTraceLen; ++i) {
+ if (GraphBuffer[i] * sign >= 0) {
+ // No change in sign, reproduce the previous sample count.
+ zc++;
+ GraphBuffer[i] = lastZc;
+ } else {
+ // Change in sign, reset the sample count.
+ sign = -sign;
+ GraphBuffer[i] = lastZc;
+ if (sign > 0) {
+ lastZc = zc;
+ zc = 0;
+ }
+ }
+ }
+
+ RepaintGraphWindow();
+ return 0;
+}
+
+int usage_data_bin2hex(){
+ PrintAndLog("Usage: data bin2hex <binary_digits>");
+ PrintAndLog(" This function will ignore all characters not 1 or 0 (but stop reading on whitespace)");
+ return 0;
+}
+
+/**
+ * @brief Utility for conversion via cmdline.
+ * @param Cmd
+ * @return
+ */
+int Cmdbin2hex(const char *Cmd)
+{
+ int bg =0, en =0;
+ if(param_getptr(Cmd, &bg, &en, 0))
+ {
+ return usage_data_bin2hex();
+ }
+ //Number of digits supplied as argument
+ size_t length = en - bg +1;
+ size_t bytelen = (length+7) / 8;
+ uint8_t* arr = (uint8_t *) malloc(bytelen);
+ memset(arr, 0, bytelen);
+ BitstreamOut bout = { arr, 0, 0 };
+
+ for(; bg <= en ;bg++)
+ {
+ char c = Cmd[bg];
+ if( c == '1') pushBit(&bout, 1);
+ else if( c == '0') pushBit(&bout, 0);
+ else PrintAndLog("Ignoring '%c'", c);
+ }
+
+ if(bout.numbits % 8 != 0)
+ {
+ printf("[padded with %d zeroes]\n", 8-(bout.numbits % 8));
+ }
+
+ //Uses printf instead of PrintAndLog since the latter
+ // adds linebreaks to each printout - this way was more convenient since we don't have to
+ // allocate a string and write to that first...
+ for(size_t x = 0; x < bytelen ; x++)
+ {
+ printf("%02X", arr[x]);
+ }
+ printf("\n");
+ free(arr);
+ return 0;
+}
+
+int usage_data_hex2bin(){
+ PrintAndLog("Usage: data hex2bin <hex_digits>");
+ PrintAndLog(" This function will ignore all non-hexadecimal characters (but stop reading on whitespace)");
+ return 0;
+}
+
+int Cmdhex2bin(const char *Cmd)
+{
+ int bg =0, en =0;
+ if(param_getptr(Cmd, &bg, &en, 0)) return usage_data_hex2bin();
+
+ while(bg <= en )
+ {
+ char x = Cmd[bg++];
+ // capitalize
+ if (x >= 'a' && x <= 'f')
+ x -= 32;
+ // convert to numeric value
+ if (x >= '0' && x <= '9')
+ x -= '0';
+ else if (x >= 'A' && x <= 'F')
+ x -= 'A' - 10;
+ else
+ continue;
+
+ //Uses printf instead of PrintAndLog since the latter
+ // adds linebreaks to each printout - this way was more convenient since we don't have to
+ // allocate a string and write to that first...
+
+ for(int i= 0 ; i < 4 ; ++i)
+ printf("%d",(x >> (3 - i)) & 1);
+ }
+ printf("\n");
+
+ return 0;
+}
+
+static command_t CommandTable[] =
+{
+ {"help", CmdHelp, 1, "This help"},
+ {"askedgedetect", CmdAskEdgeDetect, 1, "[threshold] Adjust Graph for manual ask demod using the length of sample differences to detect the edge of a wave (use 20-45, def:25)"},
+ {"askem410xdemod", CmdAskEM410xDemod, 1, "[clock] [invert<0|1>] [maxErr] -- Demodulate an EM410x tag from GraphBuffer (args optional)"},
+ {"askgproxiidemod", CmdG_Prox_II_Demod, 1, "Demodulate a G Prox II tag from GraphBuffer"},
+ {"askvikingdemod", CmdVikingDemod, 1, "Demodulate a Viking AM tag from GraphBuffer"},
+ {"autocorr", CmdAutoCorr, 1, "[window length] [g] -- Autocorrelation over window - g to save back to GraphBuffer (overwrite)"},
+ {"biphaserawdecode",CmdBiphaseDecodeRaw,1, "[offset] [invert<0|1>] [maxErr] -- Biphase decode bin stream in DemodBuffer (offset = 0|1 bits to shift the decode start)"},
+ {"bin2hex", Cmdbin2hex, 1, "bin2hex <digits> -- Converts binary to hexadecimal"},
+ {"bitsamples", CmdBitsamples, 0, "Get raw samples as bitstring"},
+ {"buffclear", CmdBuffClear, 1, "Clear sample buffer and graph window"},
+ {"dec", CmdDec, 1, "Decimate samples"},
+ {"detectclock", CmdDetectClockRate, 1, "[modulation] Detect clock rate of wave in GraphBuffer (options: 'a','f','n','p' for ask, fsk, nrz, psk respectively)"},
+ {"fdxbdemod", CmdFDXBdemodBI , 1, "Demodulate a FDX-B ISO11784/85 Biphase tag from GraphBuffer"},
+ {"fskawiddemod", CmdFSKdemodAWID, 1, "Demodulate an AWID FSK tag from GraphBuffer"},
+ //{"fskfcdetect", CmdFSKfcDetect, 1, "Try to detect the Field Clock of an FSK wave"},
+ {"fskhiddemod", CmdFSKdemodHID, 1, "Demodulate a HID FSK tag from GraphBuffer"},
+ {"fskiodemod", CmdFSKdemodIO, 1, "Demodulate an IO Prox FSK tag from GraphBuffer"},
+ {"fskpyramiddemod", CmdFSKdemodPyramid, 1, "Demodulate a Pyramid FSK tag from GraphBuffer"},
+ {"fskparadoxdemod", CmdFSKdemodParadox, 1, "Demodulate a Paradox FSK tag from GraphBuffer"},
+ {"getbitstream", CmdGetBitStream, 1, "Convert GraphBuffer's >=1 values to 1 and <1 to 0"},
+ {"grid", CmdGrid, 1, "<x> <y> -- overlay grid on graph window, use zero value to turn off either"},
+ {"hexsamples", CmdHexsamples, 0, "<bytes> [<offset>] -- Dump big buffer as hex bytes"},
+ {"hex2bin", Cmdhex2bin, 1, "hex2bin <hexadecimal> -- Converts hexadecimal to binary"},
+ {"hide", CmdHide, 1, "Hide graph window"},
+ {"hpf", CmdHpf, 1, "Remove DC offset from trace"},
+ {"load", CmdLoad, 1, "<filename> -- Load trace (to graph window"},
+ {"ltrim", CmdLtrim, 1, "<samples> -- Trim samples from left of trace"},
+ {"rtrim", CmdRtrim, 1, "<location to end trace> -- Trim samples from right of trace"},
+ {"manrawdecode", Cmdmandecoderaw, 1, "[invert] [maxErr] -- Manchester decode binary stream in DemodBuffer"},
+ {"norm", CmdNorm, 1, "Normalize max/min to +/-128"},
+ {"plot", CmdPlot, 1, "Show graph window (hit 'h' in window for keystroke help)"},
+ {"printdemodbuffer",CmdPrintDemodBuff, 1, "[x] [o] <offset> [l] <length> -- print the data in the DemodBuffer - 'x' for hex output"},
+ {"pskindalademod", CmdIndalaDecode, 1, "[clock] [invert<0|1>] -- Demodulate an indala tag (PSK1) from GraphBuffer (args optional)"},
+ {"psknexwatchdemod",CmdPSKNexWatch, 1, "Demodulate a NexWatch tag (nexkey, quadrakey) (PSK1) from GraphBuffer"},
+ {"rawdemod", CmdRawDemod, 1, "[modulation] ... <options> -see help (h option) -- Demodulate the data in the GraphBuffer and output binary"},
+ {"samples", CmdSamples, 0, "[512 - 40000] -- Get raw samples for graph window (GraphBuffer)"},
+ {"save", CmdSave, 1, "<filename> -- Save trace (from graph window)"},
+ {"scale", CmdScale, 1, "<int> -- Set cursor display scale"},
+ {"setdebugmode", CmdSetDebugMode, 1, "<0|1|2> -- Turn on or off Debugging Level for lf demods"},
+ {"shiftgraphzero", CmdGraphShiftZero, 1, "<shift> -- Shift 0 for Graphed wave + or - shift value"},
+ {"dirthreshold", CmdDirectionalThreshold, 1, "<thres up> <thres down> -- Max rising higher up-thres/ Min falling lower down-thres, keep rest as prev."},
+ {"tune", CmdTuneSamples, 0, "Get hw tune samples for graph window"},
+ {"undec", CmdUndec, 1, "Un-decimate samples by 2"},
+ {"zerocrossings", CmdZerocrossings, 1, "Count time between zero-crossings"},
+ {NULL, NULL, 0, NULL}
projects / proxmark3-svn / blobdiff