#include "proxmark3.h"\r
#include "ui.h"\r
#include "graph.h"\r
+#include "cmdmain.h"\r
#include "cmdparser.h"\r
#include "cmddata.h"\r
#include "cmdlf.h"\r
#include "cmdlft55xx.h"\r
+#include "util.h"\r
+#include "data.h"\r
+#include "lfdemod.h"\r
+#include "../common/crc.h"\r
+#include "../common/iso14443crc.h"\r
+#include "cmdhf14a.h"\r
+\r
+// Default configuration\r
+t55xx_conf_block_t config = { .modulation = DEMOD_ASK, .inversed = FALSE, .offset = 0x00, .block0 = 0x00};\r
+\r
+int usage_t55xx_config(){\r
+ PrintAndLog("Usage: lf t55xx config [d <demodulation>] [i 1] [o <offset>]");\r
+ PrintAndLog("Options: ");\r
+ PrintAndLog(" h This help");\r
+ PrintAndLog(" d <FSK|ASK|PSK1|PSK2|NZ|BI> Set demodulation FSK / ASK / PSK / NZ / Biphase");\r
+ PrintAndLog(" i [1] Inverse data signal, defaults to normal");\r
+ PrintAndLog(" o [offset] Set offset, where data should start decode in bitstream");\r
+ PrintAndLog("");\r
+ PrintAndLog("Examples:");\r
+ PrintAndLog(" lf t55xx config d FSK - FSK demodulation");\r
+ PrintAndLog(" lf t55xx config d FSK i 1 - FSK demodulation, inverse data");\r
+ PrintAndLog(" lf t55xx config d FSK i 1 o 3 - FSK demodulation, inverse data, offset=3,start from bitpos 3 to decode data");\r
+ PrintAndLog("");\r
+ return 0;\r
+}\r
+int usage_t55xx_read(){\r
+ PrintAndLog("Usage: lf t55xx read <block> <password>");\r
+ PrintAndLog(" <block>, block number to read. Between 0-7");\r
+ PrintAndLog(" <password>, OPTIONAL password (8 hex characters)");\r
+ PrintAndLog("");\r
+ PrintAndLog("Examples:");\r
+ PrintAndLog(" lf t55xx read 0 - read data from block 0");\r
+ PrintAndLog(" lf t55xx read 0 feedbeef - read data from block 0 password feedbeef");\r
+ PrintAndLog("");\r
+ return 0;\r
+}\r
+int usage_t55xx_write(){\r
+ PrintAndLog("Usage: lf t55xx wr <block> <data> [password]");\r
+ PrintAndLog(" <block>, block number to read. Between 0-7");\r
+ PrintAndLog(" <data>, 4 bytes of data to write (8 hex characters)");\r
+ PrintAndLog(" [password], OPTIONAL password 4bytes (8 hex characters)");\r
+ PrintAndLog("");\r
+ PrintAndLog("Examples:");\r
+ PrintAndLog(" lf t55xx wd 3 11223344 - write 11223344 to block 3");\r
+ PrintAndLog(" lf t55xx wd 3 11223344 feedbeef - write 11223344 to block 3 password feedbeef");\r
+ PrintAndLog("");\r
+ return 0;\r
+}\r
+int usage_t55xx_trace() {\r
+ PrintAndLog("Usage: lf t55xx trace [1]");\r
+ PrintAndLog(" [graph buffer data], if set, use Graphbuffer otherwise read data from tag.");\r
+ PrintAndLog("");\r
+ PrintAndLog("Examples:");\r
+ PrintAndLog(" lf t55xx trace");\r
+ PrintAndLog(" lf t55xx trace 1");\r
+ PrintAndLog("");\r
+ return 0;\r
+}\r
+int usage_t55xx_info() {\r
+ PrintAndLog("Usage: lf t55xx info [1]");\r
+ PrintAndLog(" [graph buffer data], if set, use Graphbuffer otherwise read data from tag.");\r
+ PrintAndLog("");\r
+ PrintAndLog("Examples:");\r
+ PrintAndLog(" lf t55xx info");\r
+ PrintAndLog(" lf t55xx info 1");\r
+ PrintAndLog("");\r
+ return 0;\r
+}\r
+int usage_t55xx_dump(){\r
+ PrintAndLog("Usage: lf t55xx dump <password>");\r
+ PrintAndLog(" <password>, OPTIONAL password 4bytes (8 hex symbols)");\r
+ PrintAndLog("");\r
+ PrintAndLog("Examples:");\r
+ PrintAndLog(" lf t55xx dump");\r
+ PrintAndLog(" lf t55xx dump feedbeef");\r
+ PrintAndLog("");\r
+ return 0;\r
+}\r
+int usage_t55xx_detect(){\r
+ PrintAndLog("Usage: lf t55xx detect");\r
+ PrintAndLog("");\r
+ PrintAndLog("Examples:");\r
+ PrintAndLog(" lf t55xx detect");\r
+ PrintAndLog(" lf t55xx detect 1");\r
+ PrintAndLog("");\r
+ return 0;\r
+}\r
\r
static int CmdHelp(const char *Cmd);\r
\r
+int CmdT55xxSetConfig(const char *Cmd){\r
\r
-int CmdReadBlk(const char *Cmd)\r
+ uint8_t offset = 0;\r
+ bool errors = FALSE;\r
+ uint8_t cmdp = 0;\r
+ char modulation[5] = {0x00};\r
+ char tmp = 0x00;\r
+ \r
+ while(param_getchar(Cmd, cmdp) != 0x00 && !errors)\r
+ {\r
+ tmp = param_getchar(Cmd, cmdp);\r
+ switch(tmp)\r
+ {\r
+ case 'h':\r
+ case 'H':\r
+ return usage_t55xx_config();\r
+ case 'd':\r
+ param_getstr(Cmd, cmdp+1, modulation);\r
+ cmdp += 2;\r
+ \r
+ if ( strcmp(modulation, "FSK" ) == 0)\r
+ config.modulation = DEMOD_FSK;\r
+ else if ( strcmp(modulation, "ASK" ) == 0)\r
+ config.modulation = DEMOD_ASK;\r
+ else if ( strcmp(modulation, "NRZ" ) == 0)\r
+ config.modulation = DEMOD_NRZ;\r
+ else if ( strcmp(modulation, "PSK1" ) == 0)\r
+ config.modulation = DEMOD_PSK1;\r
+ else if ( strcmp(modulation, "PSK2" ) == 0)\r
+ config.modulation = DEMOD_PSK2;\r
+ else if ( strcmp(modulation, "BI" ) == 0)\r
+ config.modulation = DEMOD_BI;\r
+ else {\r
+ PrintAndLog("Unknown modulation '%s'", modulation);\r
+ errors = TRUE;\r
+ }\r
+ break;\r
+ case 'i':\r
+ config.inversed = param_getchar(Cmd,cmdp+1) == '1';\r
+ cmdp+=2;\r
+ break;\r
+ case 'o':\r
+ errors |= param_getdec(Cmd, cmdp+1,&offset);\r
+ if ( !errors )\r
+ config.offset = offset;\r
+ cmdp += 2;\r
+ break;\r
+ default:\r
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
+ errors = TRUE;\r
+ break;\r
+ }\r
+ }\r
+\r
+ // No args\r
+ if (cmdp == 0) {\r
+ printConfiguration( config );\r
+ return 0;\r
+ }\r
+ //Validations\r
+ if (errors)\r
+ return usage_t55xx_config();\r
+ config.block0 = 0;\r
+ printConfiguration( config );\r
+ return 0;\r
+}\r
+\r
+int CmdT55xxReadBlock(const char *Cmd)\r
{\r
- int Block = 8; //default to invalid block\r
- UsbCommand c;\r
+ int block = -1;\r
+ int password = 0xFFFFFFFF; //default to blank Block 7\r
\r
- sscanf(Cmd, "%d", &Block);\r
+ char cmdp = param_getchar(Cmd, 0);\r
+ if (cmdp == 'h' || cmdp == 'H')\r
+ return usage_t55xx_read();\r
\r
- if (Block > 7) {\r
- PrintAndLog("Block must be between 0 and 7");\r
- return 1;\r
- } \r
+ int res = sscanf(Cmd, "%d %x", &block, &password);\r
\r
- PrintAndLog("Reading block %d", Block);\r
+ if ( res < 1 || res > 2 )\r
+ return usage_t55xx_read();\r
\r
- c.cmd = CMD_T55XX_READ_BLOCK;\r
- c.d.asBytes[0] = 0x0; //Normal mode\r
- c.arg[0] = 0;\r
- c.arg[1] = Block;\r
- c.arg[2] = 0;\r
- SendCommand(&c);\r
- return 0;\r
+ \r
+ if ((block < 0) | (block > 7)) {\r
+ PrintAndLog("Block must be between 0 and 7");\r
+ return 1;\r
+ } \r
+\r
+ UsbCommand c = {CMD_T55XX_READ_BLOCK, {0, block, 0}};\r
+ c.d.asBytes[0] = 0x0; \r
+\r
+ //Password mode\r
+ if ( res == 2 ) {\r
+ c.arg[2] = password;\r
+ c.d.asBytes[0] = 0x1; \r
+ }\r
+\r
+ SendCommand(&c);\r
+ if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {\r
+ PrintAndLog("command execution time out");\r
+ return 2;\r
+ }\r
+ \r
+ uint8_t got[12000];\r
+ GetFromBigBuf(got,sizeof(got),0);\r
+ WaitForResponse(CMD_ACK,NULL);\r
+ setGraphBuf(got, 12000);\r
+\r
+ DecodeT55xxBlock();\r
+ printT55xxBlock("");\r
+ return 0;\r
}\r
\r
-int CmdReadBlkPWD(const char *Cmd)\r
-{\r
- int Block = 8; //default to invalid block\r
- int Password = 0xFFFFFFFF; //default to blank Block 7\r
- UsbCommand c;\r
+void DecodeT55xxBlock(){\r
+ \r
+ char buf[8] = {0x00};\r
+ char *cmdStr = buf;\r
\r
- sscanf(Cmd, "%d %x", &Block, &Password);\r
+ // clearing the DemodBuffer.\r
+ DemodBufferLen = 0x00;\r
+ \r
+ // use the configuration\r
+ switch( config.modulation ){\r
+ case DEMOD_FSK:\r
+ sprintf(cmdStr,"0 %d", config.inversed );\r
+ FSKrawDemod(cmdStr, FALSE);\r
+ break;\r
+ case DEMOD_ASK:\r
+ sprintf(cmdStr,"0 %d 1", config.inversed );\r
+ ASKmanDemod(cmdStr, FALSE, FALSE);\r
+ break;\r
+ case DEMOD_PSK1:\r
+ sprintf(cmdStr,"0 %d 1", config.inversed );\r
+ PSKDemod(cmdStr, FALSE);\r
+ break;\r
+ case DEMOD_PSK2:\r
+ sprintf(cmdStr,"0 %d 1", config.inversed );\r
+ PSKDemod(cmdStr, FALSE);\r
+ psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
+ break;\r
+ case DEMOD_PSK3:\r
+ sprintf(cmdStr,"0 %d 1", config.inversed );\r
+ PSKDemod(cmdStr, FALSE);\r
+ psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
+ break;\r
+ case DEMOD_NRZ:\r
+ sprintf(cmdStr,"0 %d 1", config.inversed );\r
+ NRZrawDemod(cmdStr, FALSE);\r
+ break;\r
+ case DEMOD_BI:\r
+ sprintf(cmdStr,"0 0 %d 1", config.inversed );\r
+ // DEPENDS ON NEW CODE IN MARSHMELLOWS PULL REQUEST\r
+ //ASKbiphDemod(cmdStr, FALSE);\r
+ break;\r
+ default:\r
+ return;\r
+ }\r
+}\r
\r
- if (Block > 7) {\r
- PrintAndLog("Block must be between 0 and 7");\r
- return 1;\r
- } \r
+int CmdT55xxDetect(const char *Cmd){\r
+ char cmdp = param_getchar(Cmd, 0);\r
+ if (cmdp == 'h' || cmdp == 'H')\r
+ return usage_t55xx_detect();\r
+ \r
+ // read block 0, Page 0. Configuration.\r
+ UsbCommand c = {CMD_T55XX_READ_BLOCK, {0, 0, 0}};\r
+ c.d.asBytes[0] = 0x0; \r
\r
- PrintAndLog("Reading block %d with password %08X", Block, Password);\r
+ //Password mode\r
+ // if ( res == 2 ) {\r
+ // c.arg[2] = password;\r
+ // c.d.asBytes[0] = 0x1; \r
+ // }\r
\r
- c.cmd = CMD_T55XX_READ_BLOCK;\r
- c.d.asBytes[0] = 0x1; //Password mode\r
- c.arg[0] = 0;\r
- c.arg[1] = Block;\r
- c.arg[2] = Password;\r
- SendCommand(&c);\r
- return 0;\r
+ SendCommand(&c);\r
+ if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {\r
+ PrintAndLog("command execution time out");\r
+ return FALSE;\r
+ }\r
+ \r
+ uint8_t got[12000];\r
+ GetFromBigBuf(got,sizeof(got),0);\r
+ WaitForResponse(CMD_ACK,NULL);\r
+ setGraphBuf(got, 12000);\r
+ \r
+ if ( !tryDetectModulation() ){\r
+ PrintAndLog("Could not detect modulation automatically. Try setting it manually with \'lf t55xx config\'");\r
+ }\r
+ return 0;\r
}\r
\r
-int CmdWriteBlk(const char *Cmd)\r
-{\r
- int Block = 8; //default to invalid block\r
- int Data = 0xFFFFFFFF; //default to blank Block \r
- UsbCommand c;\r
+// detect configuration?\r
+bool tryDetectModulation(){\r
+ \r
+ uint8_t hits = 0;\r
+ t55xx_conf_block_t tests[11];\r
+ \r
+ if (GetFskClock("", FALSE, FALSE)){ \r
+ if ( FSKrawDemod("0 0", FALSE) && test(DEMOD_FSK, &tests[hits].offset)){\r
+ tests[hits].modulation = DEMOD_FSK;\r
+ tests[hits].inversed = FALSE;\r
+ ++hits;\r
+ }\r
+ if ( FSKrawDemod("0 1", FALSE) && test(DEMOD_FSK, &tests[hits].offset)) {\r
+ tests[hits].modulation = DEMOD_FSK;\r
+ tests[hits].inversed = TRUE;\r
+ ++hits;\r
+ }\r
+ } else {\r
+ if ( ASKmanDemod("0 0 1", FALSE, FALSE) && test(DEMOD_ASK, &tests[hits].offset)) {\r
+ tests[hits].modulation = DEMOD_ASK;\r
+ tests[hits].inversed = FALSE;\r
+ ++hits;\r
+ }\r
\r
- sscanf(Cmd, "%x %d", &Data, &Block);\r
+ if ( ASKmanDemod("0 1 1", FALSE, FALSE) && test(DEMOD_ASK, &tests[hits].offset)) {\r
+ tests[hits].modulation = DEMOD_ASK;\r
+ tests[hits].inversed = TRUE;\r
+ ++hits;\r
+ }\r
+ \r
+ if ( NRZrawDemod("0 0 1", FALSE) && test(DEMOD_NRZ, &tests[hits].offset)) {\r
+ tests[hits].modulation = DEMOD_NRZ;\r
+ tests[hits].inversed = FALSE;\r
+ ++hits;\r
+ }\r
\r
- if (Block > 7) {\r
- PrintAndLog("Block must be between 0 and 7");\r
- return 1;\r
- } \r
+ if ( NRZrawDemod("0 1 1", FALSE) && test(DEMOD_NRZ, &tests[hits].offset)) {\r
+ tests[hits].modulation = DEMOD_NRZ;\r
+ tests[hits].inversed = TRUE;\r
+ ++hits;\r
+ }\r
+ \r
+ if ( PSKDemod("0 0 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset)) {\r
+ tests[hits].modulation = DEMOD_PSK1;\r
+ tests[hits].inversed = FALSE;\r
+ ++hits;\r
+ }\r
+ \r
+ if ( PSKDemod("0 1 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset)) {\r
+ tests[hits].modulation = DEMOD_PSK1;\r
+ tests[hits].inversed = TRUE;\r
+ ++hits;\r
+ }\r
\r
- PrintAndLog("Writting block %d with data %08X", Block, Data);\r
+ //PSK2\r
+ if ( PSKDemod("0 0 1", FALSE)) {\r
+ psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
+ if (test(DEMOD_PSK2, &tests[hits].offset)){\r
+ tests[hits].modulation = DEMOD_PSK2;\r
+ tests[hits].inversed = FALSE;\r
+ ++hits;\r
+ }\r
+ }\r
+ if ( PSKDemod("0 1 1", FALSE)) {\r
+ psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
+ if (test(DEMOD_PSK2, &tests[hits].offset)){\r
+ tests[hits].modulation = DEMOD_PSK2;\r
+ tests[hits].inversed = TRUE;\r
+ ++hits;\r
+ }\r
+ }\r
\r
- c.cmd = CMD_T55XX_WRITE_BLOCK;\r
- c.d.asBytes[0] = 0x0; //Normal mode\r
- c.arg[0] = Data;\r
- c.arg[1] = Block;\r
- c.arg[2] = 0;\r
- SendCommand(&c);\r
- return 0;\r
+ /* DEPENDANT ON NEW CODE IN MARSHMELLOWS pull request\r
+ //biphase //offset, clock, invert, maxErr\r
+ if ( ASKbiphaseDemod("0 0 0 1", FALSE) && test(DEMOD_BI, &tests[hits].offset) ) {\r
+ tests[hits].modulation = DEMOD_BI;\r
+ tests[hits].inversed = FALSE;\r
+ ++hits;\r
+ }\r
+ if ( ASKbiphaseDemod("0 0 1 1", FALSE) && test(DEMOD_BI, &tests[hits].offset) ) {\r
+ tests[hits].modulation = DEMOD_BI;\r
+ tests[hits].inversed = TRUE;\r
+ ++hits;\r
+ }\r
+ */\r
+ } \r
+ if ( hits == 1) {\r
+ config.modulation = tests[0].modulation;\r
+ config.inversed = tests[0].inversed;\r
+ config.offset = tests[0].offset;\r
+ printConfiguration( config );\r
+ return TRUE;\r
+ }\r
+ \r
+ if ( hits > 1) {\r
+ PrintAndLog("Found [%d] possible matches for modulation.",hits);\r
+ for(int i=0; i<hits; ++i){\r
+ PrintAndLog("--[%d]---------------", i+1);\r
+ printConfiguration( tests[i] );\r
+ }\r
+ }\r
+ return FALSE;\r
+}\r
+\r
+bool testModulation(uint8_t mode, uint8_t modread){\r
+ switch( mode ){\r
+ case DEMOD_FSK:\r
+ if (modread > 3 && modread < 8) return TRUE;\r
+ break;\r
+ case DEMOD_ASK:\r
+ if (modread == 8) return TRUE;\r
+ break;\r
+ case DEMOD_PSK1:\r
+ if (modread == 1) return TRUE;\r
+ break;\r
+ case DEMOD_PSK2:\r
+ if (modread == 2) return TRUE;\r
+ break;\r
+ case DEMOD_PSK3:\r
+ if (modread == 3) return TRUE;\r
+ break;\r
+ case DEMOD_NRZ:\r
+ if (!modread) return TRUE;\r
+ break;\r
+ case DEMOD_BI:\r
+ if (modread == 16) return TRUE;\r
+ break;\r
+ default:\r
+ return FALSE;\r
+ }\r
+ return FALSE;\r
+}\r
+\r
+bool test(uint8_t mode, uint8_t *offset){\r
+\r
+ if ( !DemodBufferLen) \r
+ return FALSE;\r
+ if ( PackBits(0, 32, DemodBuffer) == 0x00 )\r
+ return FALSE;\r
+ for (uint8_t idx=1; idx<33; idx++){\r
+ uint8_t si = idx;\r
+ uint8_t safer = PackBits(si, 4, DemodBuffer); si += 4; //master key\r
+ uint8_t resv = PackBits(si, 4, DemodBuffer); si += 4; //was 7 & +=7+3 //should be only 4 bits if extended mode\r
+ uint8_t xtRate = PackBits(si, 3, DemodBuffer); si += 3+3; //new\r
+ //uint8_t bitRate = PackBits(si, 3, DemodBuffer); si += 3; //new could check bit rate\r
+ uint8_t extend = PackBits(si, 1, DemodBuffer); si += 1; //bit 15 extended mode\r
+ uint8_t modread = PackBits(si, 5, DemodBuffer); si += 5+2+1; //new\r
+ //uint8_t pskcr = PackBits(si, 2, DemodBuffer); si += 2+1; //new could check psk cr\r
+ uint8_t nml01 = PackBits(si, 1, DemodBuffer); si += 1+5; //bit 24 , 30, 31 could be tested for 0 if not extended mode\r
+ uint8_t nml02 = PackBits(si, 2, DemodBuffer); si += 2;\r
+ \r
+ bool extMode = FALSE;\r
+\r
+ //PrintAndLog("test: %X %X %X ", safer, resv, extend);\r
+ \r
+ // 2nibble must be zeroed.\r
+ if ( resv > 0x00) continue;\r
+\r
+ //if extended mode\r
+ if ( (safer == 0x6 || safer == 0x9) && extend) extMode = TRUE;\r
+\r
+ if (!extMode){\r
+ if (nml01 || nml02 || xtRate) continue;\r
+ }\r
+\r
+ //test modulation\r
+ if (!testModulation(mode, modread)) continue;\r
+ *offset = idx;\r
+ return TRUE;\r
+ }\r
+ return FALSE;\r
+}\r
+\r
+void printT55xxBlock(const char *demodStr){\r
+ \r
+ uint32_t blockData = 0;\r
+ uint8_t bits[64] = {0x00};\r
+ \r
+ if ( !DemodBufferLen) \r
+ return;\r
+ \r
+ if ( config.offset + 32 > DemodBufferLen){\r
+ PrintAndLog("The configured offset is too big. (%d > %d)", config.offset, DemodBufferLen);\r
+ return;\r
+ }\r
+ \r
+ int i = config.offset;\r
+ int pos = 32 + config.offset;\r
+ for (; i < pos; ++i)\r
+ bits[i - config.offset]=DemodBuffer[i];\r
+ \r
+ blockData = PackBits(0, 32, bits);\r
+ PrintAndLog("0x%08X %s [%s]", blockData, sprint_bin(bits,32), demodStr);\r
+}\r
+\r
+int special(const char *Cmd) {\r
+ uint32_t blockData = 0;\r
+ uint8_t bits[32] = {0x00};\r
+\r
+ PrintAndLog("[OFFSET] [DATA] [BINARY]");\r
+ PrintAndLog("----------------------------------------------------");\r
+ int i,j = 0;\r
+ for (; j < 128; ++j){\r
+ \r
+ for (i = 0; i < 32; ++i)\r
+ bits[i]=DemodBuffer[j+i];\r
+ \r
+ blockData = PackBits(0, 32, bits);\r
+ PrintAndLog("[%d] 0x%08X %s",j , blockData, sprint_bin(bits,32)); \r
+ }\r
+ \r
+ return 0;\r
}\r
\r
-int CmdWriteBlkPWD(const char *Cmd)\r
+void printConfiguration( t55xx_conf_block_t b){\r
+ PrintAndLog("Modulation : %s", GetSelectedModulationStr(b.modulation) );\r
+ PrintAndLog("Inverted : %s", (b.inversed) ? "Yes" : "No" );\r
+ PrintAndLog("Offset : %d", b.offset);\r
+ PrintAndLog("Block0 : %08X", b.block0);\r
+ PrintAndLog("");\r
+}\r
+\r
+int CmdT55xxWriteBlock(const char *Cmd)\r
{\r
- int Block = 8; //default to invalid block\r
- int Data = 0xFFFFFFFF; //default to blank Block \r
- int Password = 0xFFFFFFFF; //default to blank Block 7\r
- UsbCommand c;\r
-\r
- sscanf(Cmd, "%x %d %x", &Data, &Block, &Password);\r
-\r
- if (Block > 7) {\r
- PrintAndLog("Block must be between 0 and 7");\r
- return 1;\r
- } \r
-\r
- PrintAndLog("Writting block %d with data %08X and password %08X", Block, Data, Password);\r
-\r
- c.cmd = CMD_T55XX_WRITE_BLOCK;\r
- c.d.asBytes[0] = 0x1; //Password mode\r
- c.arg[0] = Data;\r
- c.arg[1] = Block;\r
- c.arg[2] = Password;\r
- SendCommand(&c);\r
- return 0;\r
+ int block = 8; //default to invalid block\r
+ int data = 0xFFFFFFFF; //default to blank Block \r
+ int password = 0xFFFFFFFF; //default to blank Block 7\r
+ \r
+ char cmdp = param_getchar(Cmd, 0);\r
+ if (cmdp == 'h' || cmdp == 'H') {\r
+ usage_t55xx_write();\r
+ return 0;\r
+ }\r
+ \r
+ int res = sscanf(Cmd, "%d %x %x",&block, &data, &password);\r
+ \r
+ if ( res < 2 || res > 3) {\r
+ usage_t55xx_write();\r
+ return 1;\r
+ }\r
+\r
+ if (block > 7) {\r
+ PrintAndLog("Block must be between 0 and 7");\r
+ return 1;\r
+ }\r
+ \r
+ UsbCommand c = {CMD_T55XX_WRITE_BLOCK, {data, block, 0}};\r
+ c.d.asBytes[0] = 0x0; \r
+\r
+ PrintAndLog("Writing to T55x7");\r
+ PrintAndLog("block : %d", block);\r
+ PrintAndLog("data : 0x%08X", data);\r
+\r
+ //Password mode\r
+ if (res == 3) {\r
+ c.arg[2] = password;\r
+ c.d.asBytes[0] = 0x1; \r
+ PrintAndLog("pwd : 0x%08X", password);\r
+ }\r
+ SendCommand(&c);\r
+ return 0;\r
}\r
\r
-int CmdReadTrace(const char *Cmd)\r
+int CmdT55xxReadTrace(const char *Cmd)\r
{\r
+ char cmdp = param_getchar(Cmd, 0);\r
+ \r
+ if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') \r
+ return usage_t55xx_trace();\r
+\r
+ if ( strlen(Cmd)==0){\r
+ \r
+ UsbCommand c = {CMD_T55XX_READ_TRACE, {0, 0, 0}};\r
+ SendCommand(&c);\r
+ if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {\r
+ PrintAndLog("command execution time out");\r
+ return 1;\r
+ }\r
\r
- PrintAndLog("Reading traceability data");\r
+ uint8_t got[12000];\r
+ GetFromBigBuf(got,sizeof(got),0);\r
+ WaitForResponse(CMD_ACK,NULL);\r
+ setGraphBuf(got, 12000);\r
+ }\r
+ \r
+ DecodeT55xxBlock();\r
\r
- UsbCommand c = {CMD_T55XX_READ_TRACE, {0, 0, 0}};\r
- SendCommand(&c);\r
+ if ( !DemodBufferLen) \r
+ return 2;\r
+ \r
+ RepaintGraphWindow();\r
+ uint8_t repeat = 0;\r
+ if (config.offset > 5) repeat = 32;\r
+ uint8_t si = config.offset+repeat;\r
+ uint32_t bl0 = PackBits(si, 32, DemodBuffer);\r
+ uint32_t bl1 = PackBits(si+32, 32, DemodBuffer);\r
+ \r
+ uint32_t acl = PackBits(si, 8, DemodBuffer); si += 8;\r
+ uint32_t mfc = PackBits(si, 8, DemodBuffer); si += 8;\r
+ uint32_t cid = PackBits(si, 5, DemodBuffer); si += 5;\r
+ uint32_t icr = PackBits(si, 3, DemodBuffer); si += 3;\r
+ uint32_t year = PackBits(si, 4, DemodBuffer); si += 4;\r
+ uint32_t quarter = PackBits(si, 2, DemodBuffer); si += 2;\r
+ uint32_t lotid = PackBits(si, 12, DemodBuffer); si += 12;\r
+ uint32_t wafer = PackBits(si, 5, DemodBuffer); si += 5;\r
+ uint32_t dw = PackBits(si, 15, DemodBuffer); \r
+ \r
+ year += 2000;\r
+ \r
+ PrintAndLog("");\r
+ PrintAndLog("-- T55xx Trace Information ----------------------------------");\r
+ PrintAndLog("-------------------------------------------------------------");\r
+ PrintAndLog(" ACL Allocation class (ISO/IEC 15963-1) : 0x%02X (%d)", acl, acl);\r
+ PrintAndLog(" MFC Manufacturer ID (ISO/IEC 7816-6) : 0x%02X (%d) - %s", mfc, mfc, getTagInfo(mfc));\r
+ PrintAndLog(" CID : 0x%02X (%d) - %s", cid, cid, GetModelStrFromCID(cid));\r
+ PrintAndLog(" ICR IC Revision : %d",icr );\r
+ PrintAndLog(" Manufactured");\r
+ PrintAndLog(" Year/Quarter : %d/%d",year, quarter );\r
+ PrintAndLog(" Lot ID : %d", lotid );\r
+ PrintAndLog(" Wafer number : %d", wafer);\r
+ PrintAndLog(" Die Number : %d", dw);\r
+ PrintAndLog("-------------------------------------------------------------");\r
+ PrintAndLog(" Raw Data - Page 1");\r
+ PrintAndLog(" Block 0 : 0x%08X %s", bl0, sprint_bin(DemodBuffer+config.offset+repeat,32) );\r
+ PrintAndLog(" Block 1 : 0x%08X %s", bl1, sprint_bin(DemodBuffer+config.offset+repeat+32,32) );\r
+ PrintAndLog("-------------------------------------------------------------");\r
+ /*\r
+ TRACE - BLOCK O\r
+ Bits Definition HEX\r
+ 1-8 ACL Allocation class (ISO/IEC 15963-1) 0xE0 \r
+ 9-16 MFC Manufacturer ID (ISO/IEC 7816-6) 0x15 Atmel Corporation\r
+ 17-21 CID 0x1 = Atmel ATA5577M1 0x2 = Atmel ATA5577M2 \r
+ 22-24 ICR IC revision\r
+ 25-28 YEAR (BCD encoded) 9 (= 2009)\r
+ 29-30 QUARTER 1,2,3,4 \r
+ 31-32 LOT ID\r
+ \r
+ TRACE - BLOCK 1\r
+ 1-12 LOT ID \r
+ 13-17 Wafer number\r
+ 18-32 DW, die number sequential\r
+ */\r
+ \r
return 0;\r
}\r
\r
+int CmdT55xxInfo(const char *Cmd){\r
+ /*\r
+ Page 0 Block 0 Configuration data.\r
+ Normal mode\r
+ Extended mode\r
+ */\r
+ char cmdp = param_getchar(Cmd, 0);\r
+\r
+ if (cmdp == 'h' || cmdp == 'H')\r
+ return usage_t55xx_info();\r
+ \r
+ if (strlen(Cmd)==0){\r
+ \r
+ // read block 0, Page 0. Configuration.\r
+ UsbCommand c = {CMD_T55XX_READ_BLOCK, {0, 0, 0}};\r
+ c.d.asBytes[0] = 0x0; \r
+\r
+ //Password mode\r
+ // if ( res == 2 ) {\r
+ // c.arg[2] = password;\r
+ // c.d.asBytes[0] = 0x1; \r
+ // }\r
+\r
+ SendCommand(&c);\r
+ if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {\r
+ PrintAndLog("command execution time out");\r
+ return 1;\r
+ }\r
+\r
+ uint8_t got[12000];\r
+ GetFromBigBuf(got,sizeof(got),0);\r
+ WaitForResponse(CMD_ACK,NULL);\r
+ setGraphBuf(got, 12000);\r
+ }\r
+ \r
+ DecodeT55xxBlock();\r
+\r
+ if ( !DemodBufferLen) \r
+ return 2;\r
+ \r
+ \r
+ uint8_t si = config.offset;\r
+ uint32_t bl0 = PackBits(si, 32, DemodBuffer);\r
+ \r
+ uint32_t safer = PackBits(si, 4, DemodBuffer); si += 4; \r
+ uint32_t resv = PackBits(si, 7, DemodBuffer); si += 7;\r
+ uint32_t dbr = PackBits(si, 3, DemodBuffer); si += 3;\r
+ uint32_t extend = PackBits(si, 1, DemodBuffer); si += 1;\r
+ uint32_t datamod = PackBits(si, 5, DemodBuffer); si += 5;\r
+ uint32_t pskcf = PackBits(si, 2, DemodBuffer); si += 2;\r
+ uint32_t aor = PackBits(si, 1, DemodBuffer); si += 1; \r
+ uint32_t otp = PackBits(si, 1, DemodBuffer); si += 1; \r
+ uint32_t maxblk = PackBits(si, 3, DemodBuffer); si += 3;\r
+ uint32_t pwd = PackBits(si, 1, DemodBuffer); si += 1; \r
+ uint32_t sst = PackBits(si, 1, DemodBuffer); si += 1; \r
+ uint32_t fw = PackBits(si, 1, DemodBuffer); si += 1;\r
+ uint32_t inv = PackBits(si, 1, DemodBuffer); si += 1; \r
+ uint32_t por = PackBits(si, 1, DemodBuffer); si += 1;\r
+ \r
+ PrintAndLog("");\r
+ PrintAndLog("-- T55xx Configuration & Tag Information --------------------");\r
+ PrintAndLog("-------------------------------------------------------------");\r
+ PrintAndLog(" Safer key : %s", GetSaferStr(safer));\r
+ PrintAndLog(" reserved : %d", resv);\r
+ PrintAndLog(" Data bit rate : %s", GetBitRateStr(dbr));\r
+ PrintAndLog(" eXtended mode : %s", (extend) ? "Yes - Warning":"No");\r
+ PrintAndLog(" Modulation : %s", GetModulationStr(datamod));\r
+ PrintAndLog(" PSK clock freq : %d", pskcf);\r
+ PrintAndLog(" AOR - Answer on Request : %s", (aor) ? "Yes":"No");\r
+ PrintAndLog(" OTP - One Time Pad : %s", (otp) ? "Yes - Warning":"No" );\r
+ PrintAndLog(" Max block : %d", maxblk);\r
+ PrintAndLog(" Password mode : %s", (pwd) ? "Yes":"No");\r
+ PrintAndLog(" Sequence Start Terminator : %s", (sst) ? "Yes":"No");\r
+ PrintAndLog(" Fast Write : %s", (fw) ? "Yes":"No");\r
+ PrintAndLog(" Inverse data : %s", (inv) ? "Yes":"No");\r
+ PrintAndLog(" POR-Delay : %s", (por) ? "Yes":"No");\r
+ PrintAndLog("-------------------------------------------------------------");\r
+ PrintAndLog(" Raw Data - Page 0");\r
+ PrintAndLog(" Block 0 : 0x%08X %s", bl0, sprint_bin(DemodBuffer+config.offset,32) );\r
+ PrintAndLog("-------------------------------------------------------------");\r
+ \r
+ return 0;\r
+}\r
+\r
+int CmdT55xxDump(const char *Cmd){\r
+\r
+ char s[20] = {0x00};\r
+ uint8_t pwd[4] = {0x00};\r
+\r
+ char cmdp = param_getchar(Cmd, 0);\r
+ if ( cmdp == 'h' || cmdp == 'H') {\r
+ usage_t55xx_dump();\r
+ return 0;\r
+ }\r
+\r
+ bool hasPwd = ( strlen(Cmd) > 0); \r
+ if ( hasPwd ){\r
+ if (param_gethex(Cmd, 0, pwd, 8)) {\r
+ PrintAndLog("password must include 8 HEX symbols");\r
+ return 1;\r
+ }\r
+ }\r
+ \r
+ for ( int i = 0; i <8; ++i){\r
+ memset(s,0,sizeof(s));\r
+ if ( hasPwd ) {\r
+ sprintf(s,"%d %02x%02x%02x%02x", i, pwd[0],pwd[1],pwd[2],pwd[3]);\r
+ } else {\r
+ sprintf(s,"%d", i);\r
+ }\r
+ CmdT55xxReadBlock(s);\r
+ }\r
+ return 0;\r
+}\r
+\r
+char * GetBitRateStr(uint32_t id){\r
+ static char buf[40];\r
+ char *retStr = buf;\r
+ switch (id){\r
+ case 0: \r
+ sprintf(retStr,"%d - RF/8",id);\r
+ break;\r
+ case 1:\r
+ sprintf(retStr,"%d - RF/16",id);\r
+ break;\r
+ case 2: \r
+ sprintf(retStr,"%d - RF/32",id);\r
+ break;\r
+ case 3:\r
+ sprintf(retStr,"%d - RF/40",id);\r
+ break;\r
+ case 4:\r
+ sprintf(retStr,"%d - RF/50",id);\r
+ break;\r
+ case 5:\r
+ sprintf(retStr,"%d - RF/64",id);\r
+ break;\r
+ case 6:\r
+ sprintf(retStr,"%d - RF/100",id);\r
+ break;\r
+ case 7:\r
+ sprintf(retStr,"%d - RF/128",id);\r
+ break;\r
+ default:\r
+ sprintf(retStr,"%d - (Unknown)",id);\r
+ break;\r
+ }\r
+\r
+ return buf;\r
+}\r
+\r
+char * GetSaferStr(uint32_t id){\r
+ static char buf[40];\r
+ char *retStr = buf;\r
+ \r
+ sprintf(retStr,"%d",id);\r
+ if (id == 6) {\r
+ sprintf(retStr,"%d - passwd",id);\r
+ }\r
+ if (id == 9 ){\r
+ sprintf(retStr,"%d - testmode",id);\r
+ }\r
+ \r
+ return buf;\r
+}\r
+char * GetModulationStr( uint32_t id){\r
+ static char buf[40];\r
+ char *retStr = buf;\r
+ \r
+ switch (id){\r
+ case 0: \r
+ sprintf(retStr,"%d - DIRECT (ASK/NRZ)",id);\r
+ break;\r
+ case 1:\r
+ sprintf(retStr,"%d - PSK 1 phase change when input changes",id);\r
+ break;\r
+ case 2: \r
+ sprintf(retStr,"%d - PSK 2 phase change on bitclk if input high",id);\r
+ break;\r
+ case 3:\r
+ sprintf(retStr,"%d - PSK 3 phase change on rising edge of input",id);\r
+ break;\r
+ case 4:\r
+ sprintf(retStr,"%d - FSK 1 RF/8 RF/5",id);\r
+ break;\r
+ case 5:\r
+ sprintf(retStr,"%d - FSK 2 RF/8 RF/10",id);\r
+ break;\r
+ case 6:\r
+ sprintf(retStr,"%d - FSK 1a RF/5 RF/8",id);\r
+ break;\r
+ case 7:\r
+ sprintf(retStr,"%d - FSK 2a RF/10 RF/8",id);\r
+ break;\r
+ case 8:\r
+ sprintf(retStr,"%d - Manschester",id);\r
+ break;\r
+ case 16:\r
+ sprintf(retStr,"%d - Biphase",id);\r
+ break;\r
+ case 17:\r
+ sprintf(retStr,"%d - Reserved",id);\r
+ break;\r
+ default:\r
+ sprintf(retStr,"0x%02X (Unknown)",id);\r
+ break;\r
+ }\r
+ return buf;\r
+}\r
+\r
+char * GetModelStrFromCID(uint32_t cid){\r
+ \r
+ static char buf[10];\r
+ char *retStr = buf;\r
+ \r
+ if (cid == 1) sprintf(retStr,"ATA5577M1");\r
+ if (cid == 2) sprintf(retStr,"ATA5577M2"); \r
+ return buf;\r
+}\r
+\r
+char * GetSelectedModulationStr( uint8_t id){\r
+\r
+ static char buf[16];\r
+ char *retStr = buf;\r
+ \r
+ switch (id){\r
+ case DEMOD_FSK:\r
+ sprintf(retStr,"FSK (%d)",id);\r
+ break;\r
+ case DEMOD_ASK: \r
+ sprintf(retStr,"ASK (%d)",id);\r
+ break;\r
+ case DEMOD_NRZ:\r
+ sprintf(retStr,"DIRECT/NRZ (%d)",id);\r
+ break;\r
+ case DEMOD_PSK1:\r
+ sprintf(retStr,"PSK1 (%d)",id);\r
+ break;\r
+ case DEMOD_PSK2:\r
+ sprintf(retStr,"PSK2 (%d)",id);\r
+ break;\r
+ case DEMOD_BI:\r
+ sprintf(retStr,"BIPHASE (%d)",id);\r
+ break;\r
+ default:\r
+ sprintf(retStr,"(Unknown)");\r
+ break;\r
+ }\r
+ return buf;\r
+}\r
+\r
+uint32_t PackBits(uint8_t start, uint8_t len, uint8_t* bits){\r
+ \r
+ int i = start;\r
+ int j = len-1;\r
+ if (len > 32) {\r
+ return 0;\r
+ }\r
+ uint32_t tmp = 0;\r
+ for (; j >= 0; --j, ++i){\r
+ tmp |= bits[i] << j;\r
+ }\r
+ return tmp;\r
+}\r
+\r
static command_t CommandTable[] =\r
{\r
- {"help", CmdHelp, 1, "This help"},\r
- {"readblock", CmdReadBlk, 1, "<Block> -- Read T55xx block data (page 0)"},\r
- {"readblockPWD", CmdReadBlkPWD, 1, "<Block> <Password> -- Read T55xx block data in password mode(page 0)"},\r
- {"writeblock", CmdWriteBlk, 1, "<Data> <Block> -- Write T55xx block data (page 0)"},\r
- {"writeblockPWD", CmdWriteBlkPWD, 1, "<Data> <Block> <Password> -- Write T55xx block data in password mode(page 0)"},\r
- {"readtrace", CmdReadTrace, 1, "Read T55xx traceability data (page 1)"},\r
+ {"help", CmdHelp, 1, "This help"},\r
+ {"config", CmdT55xxSetConfig, 1, "Set T55XX config for modulation, inversed data"},\r
+ {"detect", CmdT55xxDetect, 0, "Try detecting the tag modulation from reading the configuration block."},\r
+ {"read", CmdT55xxReadBlock, 0, "<block> [password] -- Read T55xx block data (page 0) [optional password]"},\r
+ {"write", CmdT55xxWriteBlock,0, "<block> <data> [password] -- Write T55xx block data (page 0) [optional password]"},\r
+ {"trace", CmdT55xxReadTrace, 0, "[1] Show T55xx traceability data (page 1/ blk 0-1)"},\r
+ {"info", CmdT55xxInfo, 0, "[1] Show T55xx configuration data (page 0/ blk 0)"},\r
+ {"dump", CmdT55xxDump, 0, "[password] Dump T55xx card block 0-7. [optional password]"},\r
+ {"special", special, 0, "Shows how a datablock changes with 32 different offsets"},\r
{NULL, NULL, 0, NULL}\r
};\r
\r
projects / proxmark3-svn / blobdiff