// Low frequency T55xx commands\r
//-----------------------------------------------------------------------------\r
\r
+#include "cmdlft55xx.h"\r
+\r
#include <stdio.h>\r
#include <string.h>\r
#include <inttypes.h>\r
#include <ctype.h>\r
#include <time.h>\r
-#include "proxmark3.h"\r
+#include "comms.h"\r
#include "ui.h"\r
#include "graph.h"\r
#include "cmdmain.h"\r
#include "cmdparser.h"\r
#include "cmddata.h"\r
#include "cmdlf.h"\r
-#include "cmdlft55xx.h"\r
#include "util.h"\r
-#include "data.h"\r
#include "lfdemod.h"\r
-#include "cmdhf14a.h" //for getTagInfo\r
#include "protocols.h"\r
+#include "taginfo.h"\r
\r
#define T55x7_CONFIGURATION_BLOCK 0x00\r
#define T55x7_PAGE0 0x00\r
PrintAndLog(" p <password> - OPTIONAL password (8 hex characters)");\r
PrintAndLog(" o - OPTIONAL override safety check");\r
PrintAndLog(" 1 - OPTIONAL read Page 1 instead of Page 0");\r
+ PrintAndLog(" r <mode> - OPTIONAL downlink encoding '0' fixed bit length (default), '1' long leading reference");\r
+ PrintAndLog(" '2' leading zero, '3' 1 of 4 coding reference"); \r
PrintAndLog(" ****WARNING****");\r
PrintAndLog(" Use of read with password on a tag not configured for a pwd");\r
PrintAndLog(" can damage the tag");\r
PrintAndLog(" p <password> - OPTIONAL password 4bytes (8 hex characters)");\r
PrintAndLog(" 1 - OPTIONAL write Page 1 instead of Page 0");\r
PrintAndLog(" t - OPTIONAL test mode write - ****DANGER****"); \r
+ PrintAndLog(" r <mode> - OPTIONAL downlink encoding '0' fixed bit length (default), '1' long leading reference");\r
+ PrintAndLog(" '2' leading zero, '3' 1 of 4 coding reference"); \r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
PrintAndLog(" lf t55xx write b 3 d 11223344 - write 11223344 to block 3");\r
PrintAndLog("Options:");\r
PrintAndLog(" 1 - if set, use Graphbuffer otherwise read data from tag.");\r
PrintAndLog(" p <password> - OPTIONAL password (8 hex characters)");\r
+ PrintAndLog(" r <mode> - OPTIONAL downlink encoding '0' fixed bit length (default), '1' long leading reference");\r
+ PrintAndLog(" '2' leading zero, '3' 1 of 4 coding reference"); \r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
PrintAndLog(" lf t55xx detect");\r
return 0;\r
}\r
int usage_t55xx_detectP1(){\r
- PrintAndLog("Usage: lf t55xx page1detect [1] [p <password>]");\r
+ PrintAndLog("Command: Detect Page 1 of a t55xx chip");\r
+ PrintAndLog("Usage: lf t55xx p1detect [1] [p <password>]");\r
PrintAndLog("Options:");\r
PrintAndLog(" 1 - if set, use Graphbuffer otherwise read data from tag.");\r
PrintAndLog(" p <password> - OPTIONAL password (8 hex characters)");\r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
- PrintAndLog(" lf t55xx page1detect");\r
- PrintAndLog(" lf t55xx page1detect 1");\r
- PrintAndLog(" lf t55xx page1detect p 11223344");\r
+ PrintAndLog(" lf t55xx p1detect");\r
+ PrintAndLog(" lf t55xx p1detect 1");\r
+ PrintAndLog(" lf t55xx p1detect p 11223344");\r
PrintAndLog("");\r
return 0;\r
}\r
PrintAndLog(" <password> - [required] password 4bytes (8 hex symbols)");\r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
- PrintAndLog(" lf t55xx wakeup 11223344 - send wakeup password");\r
+ PrintAndLog(" lf t55xx wakeup 11223344 - send wakeup password");\r
return 0;\r
}\r
int usage_t55xx_bruteforce(){\r
PrintAndLog(" password must be 4 bytes (8 hex symbols)");\r
PrintAndLog("Options:");\r
PrintAndLog(" h - this help");\r
+ PrintAndLog(" r <mode> - OPTIONAL downlink encoding '0' fixed bit length (default)"); \r
+ PrintAndLog(" '1' long leading reference, '2' leading zero ");\r
+ PrintAndLog(" '3' 1 of 4 coding reference, '4' special - try all downlink modes");\r
PrintAndLog(" <start_pwd> - 4 byte hex value to start pwd search at");\r
PrintAndLog(" <end_pwd> - 4 byte hex value to end pwd search at");\r
PrintAndLog(" i <*.dic> - loads a default keys dictionary file <*.dic>");\r
PrintAndLog("");\r
PrintAndLog("Examples:");\r
- PrintAndLog(" lf t55xx bruteforce aaaaaaaa bbbbbbbb");\r
- PrintAndLog(" lf t55xx bruteforce i default_pwd.dic");\r
+ PrintAndLog(" lf t55xx bruteforce [r 2] aaaaaaaa bbbbbbbb");\r
+ PrintAndLog(" lf t55xx bruteforce [r 2] i default_pwd.dic");\r
PrintAndLog("");\r
return 0;\r
}\r
int CmdT55xxSetConfig(const char *Cmd) {\r
\r
uint8_t offset = 0;\r
- char modulation[5] = {0x00};\r
+ char modulation[6] = {0x00};\r
char tmp = 0x00;\r
uint8_t bitRate = 0;\r
uint8_t rates[9] = {8,16,32,40,50,64,100,128,0};\r
cmdp+=2;\r
break;\r
case 'd':\r
- param_getstr(Cmd, cmdp+1, modulation);\r
+ param_getstr(Cmd, cmdp+1, modulation, sizeof(modulation));\r
cmdp += 2;\r
\r
if ( strcmp(modulation, "FSK" ) == 0) {\r
}\r
\r
// No args\r
- if (cmdp == 0) return printConfiguration( config );\r
+ if (cmdp == 0) return printConfiguration( config);\r
\r
//Validations\r
if (errors) return usage_t55xx_config();\r
\r
config.block0 = 0;\r
- return printConfiguration ( config );\r
+ return printConfiguration ( config);\r
}\r
\r
-int T55xxReadBlock(uint8_t block, bool page1, bool usepwd, bool override, uint32_t password){\r
+int T55xxReadBlock(uint8_t block, bool page1, bool usepwd, bool override, uint32_t password, uint8_t downlink_mode){\r
//Password mode\r
if ( usepwd ) {\r
// try reading the config block and verify that PWD bit is set before doing this!\r
if ( !override ) {\r
- if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, false, 0 ) ) return 0;\r
+ if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, false, 0,downlink_mode ) ) return 0;\r
if ( !tryDetectModulation() ) {\r
PrintAndLog("Safety Check: Could not detect if PWD bit is set in config block. Exits.");\r
return 0;\r
}\r
}\r
\r
- if (!AquireData(page1, block, usepwd, password) ) return 0;\r
+ if (!AquireData(page1, block, usepwd, password,downlink_mode) ) return 0;\r
if (!DecodeT55xxBlock()) return 0;\r
\r
char blk[10]={0};\r
int CmdT55xxReadBlock(const char *Cmd) {\r
uint8_t block = REGULAR_READ_MODE_BLOCK;\r
uint32_t password = 0; //default to blank Block 7\r
+ uint8_t downlink_mode = 0;\r
+ \r
bool usepwd = false;\r
bool override = false;\r
bool page1 = false;\r
page1 = true;\r
cmdp++;\r
break;\r
+ case 'r':\r
+ case 'R':\r
+ downlink_mode = param_getchar(Cmd, cmdp+1) - '0';\r
+ if (downlink_mode > 3) downlink_mode = 0;\r
+ cmdp +=2;\r
+ break;\r
default:\r
PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
errors = true;\r
}\r
\r
printT5xxHeader(page1);\r
- return T55xxReadBlock(block, page1, usepwd, override, password);\r
+ return T55xxReadBlock(block, page1, usepwd, override, password, downlink_mode);\r
}\r
\r
bool DecodeT55xxBlock(){\r
break;\r
case DEMOD_PSK1:\r
// skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)\r
- save_restoreGB(1);\r
+ save_restoreGB(GRAPH_SAVE);\r
CmdLtrim("160");\r
snprintf(cmdStr, sizeof(buf),"%d %d 6", bitRate[config.bitrate], config.inverted );\r
ans = PSKDemod(cmdStr, false);\r
//undo trim samples\r
- save_restoreGB(0);\r
+ save_restoreGB(GRAPH_RESTORE);\r
break;\r
case DEMOD_PSK2: //inverted won't affect this\r
case DEMOD_PSK3: //not fully implemented\r
// skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)\r
- save_restoreGB(1);\r
+ save_restoreGB(GRAPH_SAVE);\r
CmdLtrim("160");\r
snprintf(cmdStr, sizeof(buf),"%d 0 6", bitRate[config.bitrate] );\r
ans = PSKDemod(cmdStr, false);\r
psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
//undo trim samples\r
- save_restoreGB(0);\r
+ save_restoreGB(GRAPH_RESTORE);\r
break;\r
case DEMOD_NRZ:\r
snprintf(cmdStr, sizeof(buf),"%d %d 1", bitRate[config.bitrate], config.inverted );\r
return (bool) ASKDemod("64 0 1", false, false, 1);\r
}\r
\r
+void T55xx_Print_DownlinkMode (uint8_t downlink_mode)\r
+{\r
+ char Msg[80];\r
+ sprintf (Msg,"Downlink Mode used : ");\r
+ \r
+ switch (downlink_mode) {\r
+ case 0 : strcat (Msg,"default/fixed bit length"); break;\r
+ case 1 : strcat (Msg,"long leading reference (r 1)"); break;\r
+ case 2 : strcat (Msg,"leading zero reference (r 2)"); break;\r
+ case 3 : strcat (Msg,"1 of 4 coding reference (r 3)"); break;\r
+ default :\r
+ strcat (Msg,"default/fixed bit length"); break;\r
+\r
+ }\r
+ \r
+ PrintAndLog (Msg);\r
+ \r
+}\r
+\r
int CmdT55xxDetect(const char *Cmd){\r
bool errors = false;\r
bool useGB = false;\r
bool usepwd = false;\r
uint32_t password = 0;\r
uint8_t cmdp = 0;\r
+ uint8_t downlink_mode = 0;\r
\r
while(param_getchar(Cmd, cmdp) != 0x00 && !errors) {\r
switch(param_getchar(Cmd, cmdp)) {\r
useGB = true;\r
cmdp++;\r
break;\r
+ case 'r':\r
+ case 'R':\r
+ downlink_mode = param_getchar(Cmd, cmdp+1) - '0';\r
+ if (downlink_mode > 3) downlink_mode = 0;\r
+ cmdp +=2;\r
+ break; \r
default:\r
PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
errors = true;\r
if (errors) return usage_t55xx_detect();\r
\r
if ( !useGB) {\r
- if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, usepwd, password) )\r
+ if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, usepwd, password,downlink_mode) )\r
return 0;\r
}\r
\r
if ( !tryDetectModulation() )\r
PrintAndLog("Could not detect modulation automatically. Try setting it manually with \'lf t55xx config\'");\r
-\r
+ else {\r
+ // Add downlink mode for reference.\r
+ T55xx_Print_DownlinkMode (downlink_mode);\r
+ }\r
return 1;\r
}\r
\r
t55xx_conf_block_t tests[15];\r
int bitRate=0;\r
uint8_t fc1 = 0, fc2 = 0, ans = 0;\r
- int clk=0;\r
- ans = fskClocks(&fc1, &fc2, (uint8_t *)&clk, false);\r
+ int clk = 0, firstClockEdge = 0;\r
+ ans = fskClocks(&fc1, &fc2, (uint8_t *)&clk, false, &firstClockEdge);\r
if (ans && ((fc1==10 && fc2==8) || (fc1==8 && fc2==5))) {\r
if ( FSKrawDemod("0 0", false) && test(DEMOD_FSK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
tests[hits].modulation = DEMOD_FSK;\r
clk = GetPskClock("", false, false);\r
if (clk>0) {\r
// allow undo\r
- save_restoreGB(1);\r
+ save_restoreGB(GRAPH_SAVE);\r
// skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)\r
CmdLtrim("160");\r
if ( PSKDemod("0 0 6", false) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
}\r
} // inverse waves does not affect this demod\r
//undo trim samples\r
- save_restoreGB(0);\r
+ save_restoreGB(GRAPH_RESTORE);\r
}\r
} \r
if ( hits == 1) {\r
config.block0 = tests[0].block0;\r
config.Q5 = tests[0].Q5;\r
config.ST = tests[0].ST;\r
- printConfiguration( config );\r
+ \r
+ printConfiguration( config);\r
return true;\r
}\r
\r
PrintAndLog("Found [%d] possible matches for modulation.",hits);\r
for(int i=0; i<hits; ++i){\r
PrintAndLog("--[%d]---------------", i+1);\r
- printConfiguration( tests[i] );\r
+ printConfiguration( tests[i]);\r
}\r
}\r
return false;\r
if (!testBitRate(bitRate, clk)) continue;\r
} else { //extended mode bitrate = same function to calc bitrate as em4x05\r
if (EM4x05_GET_BITRATE(bitRate) != clk) continue;\r
+\r
}\r
//test modulation\r
if (!testModulation(mode, modread)) continue;\r
int printConfiguration( t55xx_conf_block_t b){\r
PrintAndLog("Chip Type : %s", (b.Q5) ? "T5555(Q5)" : "T55x7");\r
PrintAndLog("Modulation : %s", GetSelectedModulationStr(b.modulation) );\r
- PrintAndLog("Bit Rate : %s", GetBitRateStr(b.bitrate, (b.block0 & T55x7_X_MODE)) );\r
+ PrintAndLog("Bit Rate : %s", GetBitRateStr(b.bitrate, (b.block0 & T55x7_X_MODE && (b.block0>>28==6 || b.block0>>28==9))) );\r
PrintAndLog("Inverted : %s", (b.inverted) ? "Yes" : "No" );\r
PrintAndLog("Offset : %d", b.offset);\r
PrintAndLog("Seq. Term. : %s", (b.ST) ? "Yes" : "No" );\r
uint8_t block = 0xFF; //default to invalid block\r
uint32_t data = 0; //default to blank Block \r
uint32_t password = 0; //default to blank Block 7\r
+ uint32_t downlink_mode = 0;\r
+ \r
bool usepwd = false;\r
bool page1 = false; \r
bool gotdata = false;\r
page1 = true;\r
cmdp++;\r
break;\r
+ case 'r':\r
+ case 'R':\r
+ downlink_mode = param_getchar(Cmd, cmdp+1) - '0';\r
+ if (downlink_mode > 3) downlink_mode = 0;\r
+ cmdp +=2;\r
+ break;\r
default:\r
PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
errors = true;\r
UsbCommand resp;\r
c.d.asBytes[0] = (page1) ? 0x2 : 0; \r
c.d.asBytes[0] |= (testMode) ? 0x4 : 0; \r
-\r
+ c.d.asBytes[0] |= (downlink_mode << 3);\r
+ \r
char pwdStr[16] = {0};\r
snprintf(pwdStr, sizeof(pwdStr), "pwd: 0x%08X", password);\r
\r
PrintAndLog("Writing page %d block: %02d data: 0x%08X %s", page1, block, data, (usepwd) ? pwdStr : "" );\r
-\r
+ \r
//Password mode\r
if (usepwd) {\r
c.arg[2] = password;\r
c.d.asBytes[0] |= 0x1; \r
}\r
+ \r
clearCommandBuffer();\r
SendCommand(&c);\r
if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){\r
return usage_t55xx_trace();\r
\r
if (strlen(Cmd)==0)\r
- if ( !AquireData( T55x7_PAGE1, REGULAR_READ_MODE_BLOCK, pwdmode, password ) )\r
+ if ( !AquireData( T55x7_PAGE1, REGULAR_READ_MODE_BLOCK, pwdmode, password,0 ) )\r
return 0;\r
\r
if ( config.Q5 ) {\r
PrintAndLog("-- T55x7 Trace Information ----------------------------------");\r
PrintAndLog("-------------------------------------------------------------");\r
PrintAndLog(" ACL Allocation class (ISO/IEC 15963-1) : 0x%02X (%d)", data.acl, data.acl);\r
- PrintAndLog(" MFC Manufacturer ID (ISO/IEC 7816-6) : 0x%02X (%d) - %s", data.mfc, data.mfc, getTagInfo(data.mfc));\r
+ PrintAndLog(" MFC Manufacturer ID (ISO/IEC 7816-6) : 0x%02X (%d) - %s", data.mfc, data.mfc, getManufacturerName(data.mfc));\r
PrintAndLog(" CID : 0x%02X (%d) - %s", data.cid, data.cid, GetModelStrFromCID(data.cid));\r
PrintAndLog(" ICR IC Revision : %d", data.icr );\r
PrintAndLog(" Manufactured");\r
return usage_t55xx_info();\r
\r
if (strlen(Cmd)==0)\r
- if ( !AquireData( T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, pwdmode, password ) )\r
+ if ( !AquireData( T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, pwdmode, password,0 ) )\r
return 1;\r
\r
if (!DecodeT55xxBlock()) return 1;\r
\r
printT5xxHeader(0);\r
for ( uint8_t i = 0; i <8; ++i)\r
- T55xxReadBlock(i, 0, usepwd, override, password);\r
+ T55xxReadBlock(i, 0, usepwd, override, password,0);\r
\r
printT5xxHeader(1);\r
for ( uint8_t i = 0; i<4; i++)\r
- T55xxReadBlock(i, 1, usepwd, override, password); \r
+ T55xxReadBlock(i, 1, usepwd, override, password,0); \r
\r
return 1;\r
}\r
\r
-int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password ){\r
+int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password, uint8_t downlink_mode ){\r
// arg0 bitmodes:\r
// bit0 = pwdmode\r
// bit1 = page to read from\r
uint8_t arg0 = (page<<1) | pwdmode;\r
+ arg0 |= (downlink_mode << 3);\r
UsbCommand c = {CMD_T55XX_READ_BLOCK, {arg0, block, password}};\r
\r
clearCommandBuffer();\r
PrintAndLog("command execution time out");\r
return 0;\r
}\r
-\r
- uint8_t got[12000];\r
- GetFromBigBuf(got,sizeof(got),0);\r
- WaitForResponse(CMD_ACK,NULL);\r
- setGraphBuf(got, sizeof(got));\r
+ getSamples(12000,true);\r
return 1;\r
}\r
\r
}\r
\r
uint8_t got[BIGBUF_SIZE-1];\r
- GetFromBigBuf(got,sizeof(got),0);\r
- WaitForResponse(CMD_ACK,NULL);\r
+ GetFromBigBuf(got, sizeof(got), 0, NULL, -1 , 0);\r
setGraphBuf(got, sizeof(got));\r
return 1;\r
}\r
uint32_t start_password = 0x00000000; //start password\r
uint32_t end_password = 0xFFFFFFFF; //end password\r
bool found = false;\r
-\r
+ uint8_t downlink_mode = 0;\r
+ bool try_all_dl_modes = false;\r
+ uint8_t dl_mode = 0;\r
+ uint8_t cmd_offset = 0;\r
+ int cmd_opt = 0;\r
+ \r
char cmdp = param_getchar(Cmd, 0);\r
+ \r
if (cmdp == 'h' || cmdp == 'H') return usage_t55xx_bruteforce();\r
+ if (cmdp == 'r' || cmdp == 'R') {\r
+ downlink_mode = param_getchar(Cmd, 1) - '0'; // get 2nd option, as this is fixed order.\r
+ if (downlink_mode == 4) try_all_dl_modes = true;\r
+ if (downlink_mode > 3) downlink_mode = 0;\r
+ cmd_opt += 2; // To help start/end passwords for range to be found\r
+ cmd_offset += 4; // r <sp> x <sp> To help the string offset for filename start position in cmd\r
+ cmdp = param_getchar(Cmd, 2); // get 3rd option, as this is fixed order.\r
+ }\r
\r
keyBlock = calloc(stKeyBlock, 6);\r
if (keyBlock == NULL) return 1;\r
\r
int len = strlen(Cmd+2);\r
if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;\r
- memcpy(filename, Cmd+2, len);\r
+ memcpy(filename, Cmd+2+cmd_offset, len);\r
\r
FILE * f = fopen( filename , "r");\r
\r
//The line start with # is comment, skip\r
if( buf[0]=='#' ) continue;\r
\r
- if (!isxdigit(buf[0])) {\r
+ if (!isxdigit((unsigned char)buf[0])) {\r
PrintAndLog("File content error. '%s' must include 8 HEX symbols", buf);\r
continue;\r
}\r
testpwd = bytes_to_num(keyBlock + 4*c, 4);\r
\r
PrintAndLog("Testing %08X", testpwd);\r
+ \r
+ // Try each downlink_mode if asked to \r
+ // donwlink_mode will = 0 if > 3 or set to 0, so loop from 0 - 3\r
+ for (dl_mode = downlink_mode; dl_mode <= 3; dl_mode++){\r
+ if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, testpwd, dl_mode)) {\r
+ PrintAndLog("Acquiring data from device failed. Quitting");\r
+ free(keyBlock);\r
+ return 0;\r
+ }\r
\r
- if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, testpwd)) {\r
- PrintAndLog("Aquireing data from device failed. Quitting");\r
- free(keyBlock);\r
- return 0;\r
- }\r
+ found = tryDetectModulation();\r
\r
- found = tryDetectModulation();\r
+ if ( found ) {\r
+ PrintAndLog("Found valid password: [%08X]", testpwd);\r
+ free(keyBlock);\r
+ \r
+ T55xx_Print_DownlinkMode (dl_mode);\r
\r
- if ( found ) {\r
- PrintAndLog("Found valid password: [%08X]", testpwd);\r
- free(keyBlock);\r
- return 0;\r
- }\r
+ return 0;\r
+ }\r
+ if (!try_all_dl_modes) // Exit loop if not trying all downlink modes\r
+ dl_mode = 4;\r
+ } \r
}\r
PrintAndLog("Password NOT found.");\r
free(keyBlock);\r
// Try to read Block 7, first :)\r
\r
// incremental pwd range search\r
- start_password = param_get32ex(Cmd, 0, 0, 16);\r
- end_password = param_get32ex(Cmd, 1, 0, 16);\r
+ start_password = param_get32ex(Cmd, cmd_opt , 0, 16);\r
+ end_password = param_get32ex(Cmd, cmd_opt+1 , 0, 16);\r
\r
if ( start_password >= end_password ) {\r
free(keyBlock);\r
free(keyBlock);\r
return 0;\r
}\r
+ // Try each downlink_mode if asked to \r
+ // donwlink_mode will = 0 if > 3 or set to 0, so loop from 0 - 3\r
+ for (dl_mode = downlink_mode; dl_mode <= 3; dl_mode++){\r
+ if (!AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, i,dl_mode)) {\r
+ PrintAndLog("Acquiring data from device failed. Quitting");\r
+ free(keyBlock);\r
+ return 0;\r
+ }\r
+ found = tryDetectModulation();\r
\r
- if (!AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, i)) {\r
- PrintAndLog("Aquireing data from device failed. Quitting");\r
- free(keyBlock);\r
- return 0;\r
+ if (found) break;\r
+ if (!try_all_dl_modes) // Exit loop if not trying all downlink modes\r
+ dl_mode = 4; \r
}\r
- found = tryDetectModulation();\r
-\r
if (found) break;\r
i++;\r
}\r
\r
- PrintAndLog("");\r
-\r
- if (found)\r
+ if (found){\r
PrintAndLog("Found valid password: [%08x]", i);\r
- else\r
+ T55xx_Print_DownlinkMode (downlink_mode);\r
+ }\r
+ else{\r
+ PrintAndLog("");\r
PrintAndLog("Password NOT found. Last tried: [%08x]", --i);\r
+ }\r
\r
free(keyBlock);\r
return 0;\r
}\r
-\r
// note length of data returned is different for different chips. \r
// some return all page 1 (64 bits) and others return just that block (32 bits) \r
// unfortunately the 64 bits makes this more likely to get a false positive...\r
uint8_t preamble[] = {1,1,1,0,0,0,0,0,0,0,0,1,0,1,0,1};\r
size_t startIdx = 0;\r
uint8_t fc1 = 0, fc2 = 0, ans = 0;\r
- int clk = 0;\r
+ int clk = 0, firstClockEdge = 0;\r
bool st = true;\r
\r
if ( getData ) {\r
- if ( !AquireData(T55x7_PAGE1, 1, false, 0) )\r
+ if ( !AquireData(T55x7_PAGE1, 1, false, 0,0) )\r
return false;\r
}\r
\r
// try fsk clock detect. if successful it cannot be any other type of modulation... (in theory...)\r
- ans = fskClocks(&fc1, &fc2, (uint8_t *)&clk, false);\r
+ ans = fskClocks(&fc1, &fc2, (uint8_t *)&clk, false, &firstClockEdge);\r
if (ans && ((fc1==10 && fc2==8) || (fc1==8 && fc2==5))) {\r
if ( FSKrawDemod("0 0", false) && \r
preambleSearchEx(DemodBuffer,preamble,sizeof(preamble),&DemodBufferLen,&startIdx,false) && \r
if (errors) return usage_t55xx_detectP1();\r
\r
if ( !useGB ) {\r
- if ( !AquireData(T55x7_PAGE1, 1, usepwd, password) )\r
+ if ( !AquireData(T55x7_PAGE1, 1, usepwd, password,0) )\r
return false;\r
}\r
bool success = tryDetectP1(false);\r
\r
static command_t CommandTable[] = {\r
{"help", CmdHelp, 1, "This help"},\r
- {"bruteforce",CmdT55xxBruteForce,0, "<start password> <end password> [i <*.dic>] Simple bruteforce attack to find password"},\r
+ {"bruteforce",CmdT55xxBruteForce,0, "<start password> <end password> [i <*.dic>] Simple bruteforce attack to find password"},\r
{"config", CmdT55xxSetConfig, 1, "Set/Get T55XX configuration (modulation, inverted, offset, rate)"},\r
{"detect", CmdT55xxDetect, 1, "[1] Try detecting the tag modulation from reading the configuration block."},\r
{"p1detect", CmdT55xxDetectPage1,1, "[1] Try detecting if this is a t55xx tag by reading page 1"},\r
projects / proxmark3-svn / blobdiff