-int CmdHFiClassReader_Dump(const char *Cmd)
-{
- uint8_t readerType = 0;
- uint8_t MAC[4]={0x00,0x00,0x00,0x00};
- uint8_t KEY[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t CSN[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t CCNR[12]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- //uint8_t CC_temp[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t div_key[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t keytable[128] = {0};
- int elite = 0;
- uint8_t *used_key;
- int i;
- if (strlen(Cmd)<1)
- {
- PrintAndLog("Usage: hf iclass dump <Key> [e]");
- PrintAndLog(" Key - A 16 byte master key");
- PrintAndLog(" e - If 'e' is specified, the key is interpreted as the 16 byte");
- PrintAndLog(" Custom Key (KCus), which can be obtained via reader-attack");
- PrintAndLog(" See 'hf iclass sim 2'. This key should be on iclass-format");
- PrintAndLog(" sample: hf iclass dump 0011223344556677");
-
-
- return 0;
- }
-
- if (param_gethex(Cmd, 0, KEY, 16))
- {
- PrintAndLog("KEY must include 16 HEX symbols");
- return 1;
- }
-
- if (param_getchar(Cmd, 1) == 'e')
- {
- PrintAndLog("Elite switch on");
- elite = 1;
-
- //calc h2
- hash2(KEY, keytable);
- printarr_human_readable("keytable", keytable, 128);
-
- }
-
- UsbCommand resp;
- uint8_t key_sel[8] = {0};
- uint8_t key_sel_p[8] = { 0 };
-
- //HACK -- Below is for testing without access to a tag
- uint8_t fake_dummy_test = false;
- if(fake_dummy_test)
- {
- uint8_t xdata[16] = {0x01,0x02,0x03,0x04,0xF7,0xFF,0x12,0xE0, //CSN from http://www.proxmark.org/forum/viewtopic.php?pid=11230#p11230
- 0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}; // Just a random CC. Would be good to add a real testcase here
- memcpy(resp.d.asBytes,xdata, 16);
- resp.arg[0] = 2;
- }
-
- //End hack
-
-
- UsbCommand c = {CMD_READER_ICLASS, {0}};
- c.arg[0] = FLAG_ICLASS_READER_ONLY_ONCE| FLAG_ICLASS_READER_GET_CC;
- if(!fake_dummy_test)
- SendCommand(&c);
-
-
-
- if (fake_dummy_test || WaitForResponseTimeout(CMD_ACK,&resp,4500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- uint8_t * data = resp.d.asBytes;
-
- memcpy(CSN,data,8);
- memcpy(CCNR,data+8,8);
-
- PrintAndLog("isOk:%02x", isOK);
-
- if(isOK > 0)
- {
- PrintAndLog("CSN: %s",sprint_hex(CSN,8));
- }
- if(isOK > 1)
- {
- if(elite)
- {
- //Get the key index (hash1)
- uint8_t key_index[8] = {0};
-
- hash1(CSN, key_index);
- printvar("hash1", key_index,8);
- for(i = 0; i < 8 ; i++)
- key_sel[i] = keytable[key_index[i]] & 0xFF;
- PrintAndLog("Pre-fortified 'permuted' HS key that would be needed by an iclass reader to talk to above CSN:");
- printvar("k_sel", key_sel,8);
- //Permute from iclass format to standard format
- permutekey_rev(key_sel,key_sel_p);
- used_key = key_sel_p;
- }else{
- //Perhaps this should also be permuted to std format?
- // Something like the code below? I have no std system
- // to test this with /Martin
-
- //uint8_t key_sel_p[8] = { 0 };
- //permutekey_rev(KEY,key_sel_p);
- //used_key = key_sel_p;
-
- used_key = KEY;
-
- }
-
- PrintAndLog("Pre-fortified key that would be needed by the OmniKey reader to talk to above CSN:");
- printvar("Used key",used_key,8);
- diversifyKey(CSN,used_key, div_key);
- PrintAndLog("Hash0, a.k.a diversified key, that is computed using Ksel and stored in the card (Block 3):");
- printvar("Div key", div_key, 8);
- printvar("CC_NR:",CCNR,12);
- doMAC(CCNR,12,div_key, MAC);
- printvar("MAC", MAC, 4);
-
- UsbCommand d = {CMD_READER_ICLASS_REPLAY, {readerType}};
- memcpy(d.d.asBytes, MAC, 4);
- if(!fake_dummy_test) SendCommand(&d);
-
- }else{
- PrintAndLog("Failed to obtain CC! Aborting");
- }
- } else {
- PrintAndLog("Command execute timeout");
- }
-
- return 0;
-}
-
-int CmdHFiClass_iso14443A_write(const char *Cmd)
-{
- uint8_t readerType = 0;
- uint8_t MAC[4]={0x00,0x00,0x00,0x00};
- uint8_t KEY[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t CSN[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t CCNR[12]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t div_key[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
-
- uint8_t blockNo=0;
- uint8_t bldata[8]={0};
-
- if (strlen(Cmd)<3)
- {
- PrintAndLog("Usage: hf iclass write <Key> <Block> <Data>");
- PrintAndLog(" sample: hf iclass write 0011223344556677 10 AAAAAAAAAAAAAAAA");
- return 0;
- }
-
- if (param_gethex(Cmd, 0, KEY, 16))
- {
- PrintAndLog("KEY must include 16 HEX symbols");
- return 1;
- }
-
- blockNo = param_get8(Cmd, 1);
- if (blockNo>32)
- {
- PrintAndLog("Error: Maximum number of blocks is 32 for iClass 2K Cards!");
- return 1;
- }
- if (param_gethex(Cmd, 2, bldata, 8))
- {
- PrintAndLog("Block data must include 8 HEX symbols");
- return 1;
- }
-
- UsbCommand c = {CMD_ICLASS_ISO14443A_WRITE, {0}};
- SendCommand(&c);
- UsbCommand resp;
-
- if (WaitForResponseTimeout(CMD_ACK,&resp,4500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- uint8_t * data = resp.d.asBytes;
-
- memcpy(CSN,data,8);
- memcpy(CCNR,data+8,8);
- PrintAndLog("DEBUG: %s",sprint_hex(CSN,8));
- PrintAndLog("DEBUG: %s",sprint_hex(CCNR,8));
- PrintAndLog("isOk:%02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- }
-
- diversifyKey(CSN,KEY, div_key);
-
- PrintAndLog("Div Key: %s",sprint_hex(div_key,8));
- doMAC(CCNR, 12,div_key, MAC);
-
- UsbCommand c2 = {CMD_ICLASS_ISO14443A_WRITE, {readerType,blockNo}};
- memcpy(c2.d.asBytes, bldata, 8);
- memcpy(c2.d.asBytes+8, MAC, 4);
- SendCommand(&c2);
-
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- uint8_t * data = resp.d.asBytes;
-
- if (isOK)
- PrintAndLog("isOk:%02x data:%s", isOK, sprint_hex(data, 4));
- else
- PrintAndLog("isOk:%02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- }
- return 0;
+int iclassEmlSetMem(uint8_t *data, int blockNum, int blocksCount) {
+ UsbCommand c = {CMD_MIFARE_EML_MEMSET, {blockNum, blocksCount, 0}};
+ memcpy(c.d.asBytes, data, blocksCount * 16);
+ SendCommand(&c);
+ return 0;
+}
+
+int hf_iclass_eload_usage(void) {
+ PrintAndLog("Loads iclass tag-dump into emulator memory on device");
+ PrintAndLog("Usage: hf iclass eload f <filename>");
+ PrintAndLog("");
+ PrintAndLog("Example: hf iclass eload f iclass_tagdump-aa162d30f8ff12f1.bin");
+ return 0;
+}
+
+int CmdHFiClassELoad(const char *Cmd) {
+
+ char opt = param_getchar(Cmd, 0);
+ if (strlen(Cmd)<1 || opt == 'h')
+ return hf_iclass_eload_usage();
+
+ //File handling and reading
+ FILE *f;
+ char filename[FILE_PATH_SIZE];
+ if(opt == 'f' && param_getstr(Cmd, 1, filename, sizeof(filename)) > 0)
+ {
+ f = fopen(filename, "rb");
+ }else{
+ return hf_iclass_eload_usage();
+ }
+
+ if(!f) {
+ PrintAndLog("Failed to read from file '%s'", filename);
+ return 1;
+ }
+
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+
+ if (fsize < 0) {
+ PrintAndLog("Error, when getting filesize");
+ fclose(f);
+ return 1;
+ }
+
+ uint8_t *dump = malloc(fsize);
+
+ size_t bytes_read = fread(dump, 1, fsize, f);
+ fclose(f);
+
+ printIclassDumpInfo(dump);
+ //Validate
+
+ if (bytes_read < fsize)
+ {
+ prnlog("Error, could only read %d bytes (should be %d)",bytes_read, fsize );
+ free(dump);
+ return 1;
+ }
+ //Send to device
+ uint32_t bytes_sent = 0;
+ uint32_t bytes_remaining = bytes_read;
+
+ while(bytes_remaining > 0){
+ uint32_t bytes_in_packet = MIN(USB_CMD_DATA_SIZE, bytes_remaining);
+ UsbCommand c = {CMD_ICLASS_EML_MEMSET, {bytes_sent,bytes_in_packet,0}};
+ memcpy(c.d.asBytes, dump, bytes_in_packet);
+ SendCommand(&c);
+ bytes_remaining -= bytes_in_packet;
+ bytes_sent += bytes_in_packet;
+ }
+ free(dump);
+ PrintAndLog("Sent %d bytes of data to device emulator memory", bytes_sent);
+ return 0;
+}
+
+static int readKeyfile(const char *filename, size_t len, uint8_t* buffer) {
+ FILE *f = fopen(filename, "rb");
+ if(!f) {
+ PrintAndLog("Failed to read from file '%s'", filename);
+ return 1;
+ }
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+ size_t bytes_read = fread(buffer, 1, len, f);
+ fclose(f);
+ if(fsize != len)
+ {
+ PrintAndLog("Warning, file size is %d, expected %d", fsize, len);
+ return 1;
+ }
+ if(bytes_read != len)
+ {
+ PrintAndLog("Warning, could only read %d bytes, expected %d" ,bytes_read, len);
+ return 1;
+ }
+ return 0;
+}
+
+int usage_hf_iclass_decrypt(void) {
+ PrintAndLog("Usage: hf iclass decrypt f <tagdump>");
+ PrintAndLog("");
+ PrintAndLog("OBS! In order to use this function, the file 'iclass_decryptionkey.bin' must reside");
+ PrintAndLog("in the working directory. The file should be 16 bytes binary data");
+ PrintAndLog("");
+ PrintAndLog("example: hf iclass decrypt f tagdump_12312342343.bin");
+ PrintAndLog("");
+ PrintAndLog("OBS! This is pretty stupid implementation, it tries to decrypt every block after block 6. ");
+ PrintAndLog("Correct behaviour would be to decrypt only the application areas where the key is valid,");
+ PrintAndLog("which is defined by the configuration block.");
+ return 1;
+}
+
+int CmdHFiClassDecrypt(const char *Cmd) {
+ uint8_t key[16] = { 0 };
+ if(readKeyfile("iclass_decryptionkey.bin", 16, key))
+ {
+ usage_hf_iclass_decrypt();
+ return 1;
+ }
+ PrintAndLog("Decryption file found... ");
+ char opt = param_getchar(Cmd, 0);
+ if (strlen(Cmd)<1 || opt == 'h')
+ return usage_hf_iclass_decrypt();
+
+ //Open the tagdump-file
+ FILE *f;
+ char filename[FILE_PATH_SIZE];
+ if(opt == 'f' && param_getstr(Cmd, 1, filename, sizeof(filename)) > 0) {
+ f = fopen(filename, "rb");
+ if ( f == NULL ) {
+ PrintAndLog("Could not find file %s", filename);
+ return 1;
+ }
+ } else {
+ return usage_hf_iclass_decrypt();
+ }
+
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+ uint8_t enc_dump[8] = {0};
+ uint8_t *decrypted = malloc(fsize);
+ des3_context ctx = { DES_DECRYPT ,{ 0 } };
+ des3_set2key_dec( &ctx, key);
+ size_t bytes_read = fread(enc_dump, 1, 8, f);
+
+ //Use the first block (CSN) for filename
+ char outfilename[FILE_PATH_SIZE] = { 0 };
+ snprintf(outfilename,FILE_PATH_SIZE,"iclass_tagdump-%02x%02x%02x%02x%02x%02x%02x%02x-decrypted",
+ enc_dump[0],enc_dump[1],enc_dump[2],enc_dump[3],
+ enc_dump[4],enc_dump[5],enc_dump[6],enc_dump[7]);
+
+ size_t blocknum =0;
+ while(bytes_read == 8)
+ {
+ if(blocknum < 7)
+ {
+ memcpy(decrypted+(blocknum*8), enc_dump, 8);
+ }else{
+ des3_crypt_ecb(&ctx, enc_dump,decrypted +(blocknum*8) );
+ }
+ printvar("decrypted block", decrypted +(blocknum*8), 8);
+ bytes_read = fread(enc_dump, 1, 8, f);
+ blocknum++;
+ }
+ fclose(f);
+
+ saveFile(outfilename,"bin", decrypted, blocknum*8);
+ free(decrypted);
+ return 0;
+}
+
+int usage_hf_iclass_encrypt(void) {
+ PrintAndLog("Usage: hf iclass encrypt <BlockData>");
+ PrintAndLog("");
+ PrintAndLog("OBS! In order to use this function, the file 'iclass_decryptionkey.bin' must reside");
+ PrintAndLog("in the working directory. The file should be 16 bytes binary data");
+ PrintAndLog("");
+ PrintAndLog("example: hf iclass encrypt 0102030405060708");
+ PrintAndLog("");
+ return 0;
+}
+
+static int iClassEncryptBlkData(uint8_t *blkData) {
+ uint8_t key[16] = { 0 };
+ if(readKeyfile("iclass_decryptionkey.bin", 16, key))
+ {
+ usage_hf_iclass_encrypt();
+ return 1;
+ }
+ PrintAndLog("Decryption file found... ");
+
+ uint8_t encryptedData[16];
+ uint8_t *encrypted = encryptedData;
+ des3_context ctx = { DES_DECRYPT ,{ 0 } };
+ des3_set2key_enc( &ctx, key);
+
+ des3_crypt_ecb(&ctx, blkData,encrypted);
+ //printvar("decrypted block", decrypted, 8);
+ memcpy(blkData,encrypted,8);
+
+ return 1;
+}
+
+int CmdHFiClassEncryptBlk(const char *Cmd) {
+ uint8_t blkData[8] = {0};
+ char opt = param_getchar(Cmd, 0);
+ if (strlen(Cmd)<1 || opt == 'h')
+ return usage_hf_iclass_encrypt();
+
+ //get the bytes to encrypt
+ if (param_gethex(Cmd, 0, blkData, 16))
+ {
+ PrintAndLog("BlockData must include 16 HEX symbols");
+ return 0;
+ }
+ if (!iClassEncryptBlkData(blkData)) return 0;
+
+ printvar("encrypted block", blkData, 8);
+ return 1;
+}
+
+void Calc_wb_mac(uint8_t blockno, uint8_t *data, uint8_t *div_key, uint8_t MAC[4]) {
+ uint8_t WB[9];
+ WB[0] = blockno;
+ memcpy(WB + 1,data,8);
+ doMAC_N(WB,sizeof(WB),div_key,MAC);
+ //printf("Cal wb mac block [%02x][%02x%02x%02x%02x%02x%02x%02x%02x] : MAC [%02x%02x%02x%02x]",WB[0],WB[1],WB[2],WB[3],WB[4],WB[5],WB[6],WB[7],WB[8],MAC[0],MAC[1],MAC[2],MAC[3]);
+}
+
+static bool select_only(uint8_t *CSN, uint8_t *CCNR, bool use_credit_key, bool verbose) {
+ UsbCommand resp;
+
+ UsbCommand c = {CMD_READER_ICLASS, {0}};
+ c.arg[0] = FLAG_ICLASS_READER_ONLY_ONCE | FLAG_ICLASS_READER_CC | FLAG_ICLASS_READER_ONE_TRY;
+ if (use_credit_key)
+ c.arg[0] |= FLAG_ICLASS_READER_CEDITKEY;
+
+ clearCommandBuffer();
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,4500))
+ {
+ PrintAndLog("Command execute timeout");
+ return false;
+ }
+
+ uint8_t isOK = resp.arg[0] & 0xff;
+ uint8_t *data = resp.d.asBytes;
+
+ memcpy(CSN,data,8);
+ if (CCNR!=NULL)memcpy(CCNR,data+16,8);
+ if(isOK > 0)
+ {
+ if (verbose) PrintAndLog("CSN: %s",sprint_hex(CSN,8));
+ }
+ if(isOK <= 1){
+ PrintAndLog("Failed to obtain CC! Aborting");
+ return false;
+ }
+ return true;
+}
+
+static bool select_and_auth(uint8_t *KEY, uint8_t *MAC, uint8_t *div_key, bool use_credit_key, bool elite, bool rawkey, bool verbose) {
+ uint8_t CSN[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CCNR[12]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+
+ if (!select_only(CSN, CCNR, use_credit_key, verbose))
+ return false;
+
+ //get div_key
+ if(rawkey)
+ memcpy(div_key, KEY, 8);
+ else
+ HFiClassCalcDivKey(CSN, KEY, div_key, elite);
+ if (verbose) PrintAndLog("Authing with %s: %02x%02x%02x%02x%02x%02x%02x%02x", rawkey ? "raw key" : "diversified key", div_key[0],div_key[1],div_key[2],div_key[3],div_key[4],div_key[5],div_key[6],div_key[7]);
+
+ doMAC(CCNR, div_key, MAC);
+ UsbCommand resp;
+ UsbCommand d = {CMD_ICLASS_AUTHENTICATION, {0}};
+ memcpy(d.d.asBytes, MAC, 4);
+ clearCommandBuffer();
+ SendCommand(&d);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,4500))
+ {
+ if (verbose) PrintAndLog("Auth Command execute timeout");
+ return false;
+ }
+ uint8_t isOK = resp.arg[0] & 0xff;
+ if (!isOK) {
+ if (verbose) PrintAndLog("Authentication error");
+ return false;
+ }
+ return true;
+}
+
+int usage_hf_iclass_dump(void) {
+ PrintAndLog("Usage: hf iclass dump f <fileName> k <Key> c <CreditKey> e|r\n");
+ PrintAndLog("Options:");
+ PrintAndLog(" f <filename> : specify a filename to save dump to");
+ PrintAndLog(" k <Key> : *Access Key as 16 hex symbols or 1 hex to select key from memory");
+ PrintAndLog(" c <CreditKey>: Credit Key as 16 hex symbols or 1 hex to select key from memory");
+ PrintAndLog(" e : If 'e' is specified, the key is interpreted as the 16 byte");
+ PrintAndLog(" Custom Key (KCus), which can be obtained via reader-attack");
+ PrintAndLog(" See 'hf iclass sim 2'. This key should be on iclass-format");
+ PrintAndLog(" r : If 'r' is specified, the key is interpreted as raw block 3/4");
+ PrintAndLog(" NOTE: * = required");
+ PrintAndLog("Samples:");
+ PrintAndLog(" hf iclass dump k 001122334455667B");
+ PrintAndLog(" hf iclass dump k AAAAAAAAAAAAAAAA c 001122334455667B");
+ PrintAndLog(" hf iclass dump k AAAAAAAAAAAAAAAA e");
+ return 0;
+}
+
+int CmdHFiClassReader_Dump(const char *Cmd) {
+
+ uint8_t MAC[4] = {0x00,0x00,0x00,0x00};
+ uint8_t div_key[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t c_div_key[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t blockno = 0;
+ uint8_t numblks = 0;
+ uint8_t maxBlk = 31;
+ uint8_t app_areas = 1;
+ uint8_t kb = 2;
+ uint8_t KEY[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CreditKEY[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t keyNbr = 0;
+ uint8_t dataLen = 0;
+ uint8_t fileNameLen = 0;
+ char filename[FILE_PATH_SIZE]={0};
+ char tempStr[50] = {0};
+ bool have_debit_key = false;
+ bool have_credit_key = false;
+ bool use_credit_key = false;
+ bool elite = false;
+ bool rawkey = false;
+ bool errors = false;
+ uint8_t cmdp = 0;
+
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_iclass_dump();
+ case 'c':
+ case 'C':
+ have_credit_key = true;
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr, sizeof(tempStr));
+ if (dataLen == 16) {
+ errors = param_gethex(tempStr, 0, CreditKEY, dataLen);
+ } else if (dataLen == 1) {
+ keyNbr = param_get8(Cmd, cmdp+1);
+ if (keyNbr < ICLASS_KEYS_MAX) {
+ memcpy(CreditKEY, iClass_Key_Table[keyNbr], 8);
+ } else {
+ PrintAndLog("\nERROR: Credit KeyNbr is invalid\n");
+ errors = true;
+ }
+ } else {
+ PrintAndLog("\nERROR: Credit Key is incorrect length\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'e':
+ case 'E':
+ elite = true;
+ cmdp++;
+ break;
+ case 'f':
+ case 'F':
+ fileNameLen = param_getstr(Cmd, cmdp+1, filename, sizeof(filename));
+ if (fileNameLen < 1) {
+ PrintAndLog("No filename found after f");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'k':
+ case 'K':
+ have_debit_key = true;
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr, sizeof(tempStr));
+ if (dataLen == 16) {
+ errors = param_gethex(tempStr, 0, KEY, dataLen);
+ } else if (dataLen == 1) {
+ keyNbr = param_get8(Cmd, cmdp+1);
+ if (keyNbr < ICLASS_KEYS_MAX) {
+ memcpy(KEY, iClass_Key_Table[keyNbr], 8);
+ } else {
+ PrintAndLog("\nERROR: Credit KeyNbr is invalid\n");
+ errors = true;
+ }
+ } else {
+ PrintAndLog("\nERROR: Credit Key is incorrect length\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'r':
+ case 'R':
+ rawkey = true;
+ cmdp++;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'\n", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ if(errors) return usage_hf_iclass_dump();
+ }
+
+ if (cmdp < 2) return usage_hf_iclass_dump();
+ // if no debit key given try credit key on AA1 (not for iclass but for some picopass this will work)
+ if (!have_debit_key && have_credit_key) use_credit_key = true;
+
+ //get config and first 3 blocks
+ UsbCommand c = {CMD_READER_ICLASS, {FLAG_ICLASS_READER_CSN |
+ FLAG_ICLASS_READER_CONF | FLAG_ICLASS_READER_ONLY_ONCE | FLAG_ICLASS_READER_ONE_TRY}};
+ UsbCommand resp;
+ uint8_t tag_data[255*8];
+
+ clearCommandBuffer();
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 4500)) {
+ PrintAndLog("Command execute timeout");
+ DropField();
+ return 0;
+ }
+ uint8_t readStatus = resp.arg[0] & 0xff;
+ uint8_t *data = resp.d.asBytes;
+
+ if(readStatus == 0){
+ PrintAndLog("No tag found...");
+ DropField();
+ return 0;
+ }
+ if( readStatus & (FLAG_ICLASS_READER_CSN|FLAG_ICLASS_READER_CONF|FLAG_ICLASS_READER_CC)){
+ memcpy(tag_data, data, 8*3);
+ blockno+=2; // 2 to force re-read of block 2 later. (seems to respond differently..)
+ numblks = data[8];
+ getMemConfig(data[13], data[12], &maxBlk, &app_areas, &kb);
+ // large memory - not able to dump pages currently
+ if (numblks > maxBlk) numblks = maxBlk;
+ }
+ DropField();
+ // authenticate debit key and get div_key - later store in dump block 3
+ if (!select_and_auth(KEY, MAC, div_key, use_credit_key, elite, rawkey, false)){
+ //try twice - for some reason it sometimes fails the first time...
+ if (!select_and_auth(KEY, MAC, div_key, use_credit_key, elite, rawkey, false)){
+ DropField();
+ return 0;
+ }
+ }
+
+ // begin dump
+ UsbCommand w = {CMD_ICLASS_DUMP, {blockno, numblks-blockno+1}};
+ clearCommandBuffer();
+ SendCommand(&w);
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 4500)) {
+ PrintAndLog("Command execute time-out 1");
+ DropField();
+ return 1;
+ }
+ uint32_t blocksRead = resp.arg[1];
+ uint8_t isOK = resp.arg[0] & 0xff;
+ if (!isOK && !blocksRead) {
+ PrintAndLog("Read Block Failed");
+ DropField();
+ return 0;
+ }
+ uint32_t startindex = resp.arg[2];
+ if (blocksRead*8 > sizeof(tag_data)-(blockno*8)) {
+ PrintAndLog("Data exceeded Buffer size!");
+ blocksRead = (sizeof(tag_data)/8) - blockno;
+ }
+ // response ok - now get bigbuf content of the dump
+ GetFromBigBuf(tag_data+(blockno*8), blocksRead*8, startindex);
+ WaitForResponse(CMD_ACK,NULL);
+ size_t gotBytes = blocksRead*8 + blockno*8;
+
+ // try AA2
+ if (have_credit_key) {
+ //turn off hf field before authenticating with different key
+ DropField();
+ memset(MAC,0,4);
+ // AA2 authenticate credit key and git c_div_key - later store in dump block 4
+ if (!select_and_auth(CreditKEY, MAC, c_div_key, true, false, false, false)){
+ //try twice - for some reason it sometimes fails the first time...
+ if (!select_and_auth(CreditKEY, MAC, c_div_key, true, false, false, false)){
+ DropField();
+ return 0;
+ }
+ }
+ // do we still need to read more block? (aa2 enabled?)
+ if (maxBlk > blockno+numblks+1) {
+ // setup dump and start
+ w.arg[0] = blockno + blocksRead;
+ w.arg[1] = maxBlk - (blockno + blocksRead);
+ clearCommandBuffer();
+ SendCommand(&w);
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 4500)) {
+ PrintAndLog("Command execute timeout 2");
+ DropField();
+ return 0;
+ }
+ uint8_t isOK = resp.arg[0] & 0xff;
+ blocksRead = resp.arg[1];
+ if (!isOK && !blocksRead) {
+ PrintAndLog("Read Block Failed 2");
+ DropField();
+ return 0;
+ }
+
+ startindex = resp.arg[2];
+ if (blocksRead*8 > sizeof(tag_data)-gotBytes) {
+ PrintAndLog("Data exceeded Buffer size!");
+ blocksRead = (sizeof(tag_data) - gotBytes)/8;
+ }
+ // get dumped data from bigbuf
+ GetFromBigBuf(tag_data+gotBytes, blocksRead*8, startindex);
+ WaitForResponse(CMD_ACK,NULL);
+
+ gotBytes += blocksRead*8;
+ } else { //field is still on - turn it off...
+ DropField();
+ }
+ }
+
+ // add diversified keys to dump
+ if (have_debit_key) memcpy(tag_data+(3*8),div_key,8);
+ if (have_credit_key) memcpy(tag_data+(4*8),c_div_key,8);
+ // print the dump
+ printf("------+--+-------------------------+\n");
+ printf("CSN |00| %s|\n",sprint_hex(tag_data, 8));
+ printIclassDumpContents(tag_data, 1, (gotBytes/8), gotBytes);
+
+ if (filename[0] == 0){
+ snprintf(filename, FILE_PATH_SIZE,"iclass_tagdump-%02x%02x%02x%02x%02x%02x%02x%02x",
+ tag_data[0],tag_data[1],tag_data[2],tag_data[3],
+ tag_data[4],tag_data[5],tag_data[6],tag_data[7]);
+ }
+
+ // save the dump to .bin file
+ PrintAndLog("Saving dump file - %d blocks read", gotBytes/8);
+ saveFile(filename, "bin", tag_data, gotBytes);
+ return 1;
+}
+
+static int WriteBlock(uint8_t blockno, uint8_t *bldata, uint8_t *KEY, bool use_credit_key, bool elite, bool rawkey, bool verbose) {
+ uint8_t MAC[4]={0x00,0x00,0x00,0x00};
+ uint8_t div_key[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ if (!select_and_auth(KEY, MAC, div_key, use_credit_key, elite, rawkey, verbose))
+ return 0;
+
+ UsbCommand resp;
+
+ Calc_wb_mac(blockno,bldata,div_key,MAC);
+ UsbCommand w = {CMD_ICLASS_WRITEBLOCK, {blockno}};
+ memcpy(w.d.asBytes, bldata, 8);
+ memcpy(w.d.asBytes + 8, MAC, 4);
+
+ clearCommandBuffer();
+ SendCommand(&w);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,4500))
+ {
+ PrintAndLog("Write Command execute timeout");
+ return 0;
+ }
+ uint8_t isOK = resp.arg[0] & 0xff;
+ if (!isOK) {
+ PrintAndLog("Write Block Failed");
+ return 0;
+ }
+ PrintAndLog("Write Block Successful");
+ return 1;
+}
+
+int usage_hf_iclass_writeblock(void) {
+ PrintAndLog("Options:");
+ PrintAndLog(" b <Block> : The block number as 2 hex symbols");
+ PrintAndLog(" d <data> : Set the Data to write as 16 hex symbols");
+ PrintAndLog(" k <Key> : Access Key as 16 hex symbols or 1 hex to select key from memory");
+ PrintAndLog(" c : If 'c' is specified, the key set is assumed to be the credit key\n");
+ PrintAndLog(" e : If 'e' is specified, elite computations applied to key");
+ PrintAndLog(" r : If 'r' is specified, no computations applied to key");
+ PrintAndLog("Samples:");
+ PrintAndLog(" hf iclass writeblk b 0A d AAAAAAAAAAAAAAAA k 001122334455667B");
+ PrintAndLog(" hf iclass writeblk b 1B d AAAAAAAAAAAAAAAA k 001122334455667B c");
+ PrintAndLog(" hf iclass writeblk b 0A d AAAAAAAAAAAAAAAA n 0");
+ return 0;
+}
+
+int CmdHFiClass_WriteBlock(const char *Cmd) {
+ uint8_t blockno=0;
+ uint8_t bldata[8]={0,0,0,0,0,0,0,0};
+ uint8_t KEY[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t keyNbr = 0;
+ uint8_t dataLen = 0;
+ char tempStr[50] = {0};
+ bool use_credit_key = false;
+ bool elite = false;
+ bool rawkey= false;
+ bool errors = false;
+ uint8_t cmdp = 0;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_iclass_writeblock();
+ case 'b':
+ case 'B':
+ if (param_gethex(Cmd, cmdp+1, &blockno, 2)) {
+ PrintAndLog("Block No must include 2 HEX symbols\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'c':
+ case 'C':
+ use_credit_key = true;
+ cmdp++;
+ break;
+ case 'd':
+ case 'D':
+ if (param_gethex(Cmd, cmdp+1, bldata, 16))
+ {
+ PrintAndLog("KEY must include 16 HEX symbols\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'e':
+ case 'E':
+ elite = true;
+ cmdp++;
+ break;
+ case 'k':
+ case 'K':
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr, sizeof(tempStr));
+ if (dataLen == 16) {
+ errors = param_gethex(tempStr, 0, KEY, dataLen);
+ } else if (dataLen == 1) {
+ keyNbr = param_get8(Cmd, cmdp+1);
+ if (keyNbr < ICLASS_KEYS_MAX) {
+ memcpy(KEY, iClass_Key_Table[keyNbr], 8);
+ } else {
+ PrintAndLog("\nERROR: Credit KeyNbr is invalid\n");
+ errors = true;
+ }
+ } else {
+ PrintAndLog("\nERROR: Credit Key is incorrect length\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'r':
+ case 'R':
+ rawkey = true;
+ cmdp++;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'\n", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ if(errors) return usage_hf_iclass_writeblock();
+ }
+
+ if (cmdp < 6) return usage_hf_iclass_writeblock();
+ int ans = WriteBlock(blockno, bldata, KEY, use_credit_key, elite, rawkey, true);
+ DropField();
+ return ans;
+}
+
+int usage_hf_iclass_clone(void) {
+ PrintAndLog("Usage: hf iclass clone f <tagfile.bin> b <first block> l <last block> k <KEY> c e|r");
+ PrintAndLog("Options:");
+ PrintAndLog(" f <filename>: specify a filename to clone from");
+ PrintAndLog(" b <Block> : The first block to clone as 2 hex symbols");
+ PrintAndLog(" l <Last Blk>: Set the Data to write as 16 hex symbols");
+ PrintAndLog(" k <Key> : Access Key as 16 hex symbols or 1 hex to select key from memory");
+ PrintAndLog(" c : If 'c' is specified, the key set is assumed to be the credit key\n");
+ PrintAndLog(" e : If 'e' is specified, elite computations applied to key");
+ PrintAndLog(" r : If 'r' is specified, no computations applied to key");
+ PrintAndLog("Samples:");
+ PrintAndLog(" hf iclass clone f iclass_tagdump-121345.bin b 06 l 1A k 1122334455667788 e");
+ PrintAndLog(" hf iclass clone f iclass_tagdump-121345.bin b 05 l 19 k 0");
+ PrintAndLog(" hf iclass clone f iclass_tagdump-121345.bin b 06 l 19 k 0 e");
+ return -1;
+}
+
+int CmdHFiClassCloneTag(const char *Cmd) {
+ char filename[FILE_PATH_SIZE] = {0};
+ char tempStr[50]={0};
+ uint8_t KEY[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t keyNbr = 0;
+ uint8_t fileNameLen = 0;
+ uint8_t startblock = 0;
+ uint8_t endblock = 0;
+ uint8_t dataLen = 0;
+ bool use_credit_key = false;
+ bool elite = false;
+ bool rawkey = false;
+ bool errors = false;
+ uint8_t cmdp = 0;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_iclass_clone();
+ case 'b':
+ case 'B':
+ if (param_gethex(Cmd, cmdp+1, &startblock, 2)) {
+ PrintAndLog("Start Block No must include 2 HEX symbols\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'c':
+ case 'C':
+ use_credit_key = true;
+ cmdp++;
+ break;
+ case 'e':
+ case 'E':
+ elite = true;
+ cmdp++;
+ break;
+ case 'f':
+ case 'F':
+ fileNameLen = param_getstr(Cmd, cmdp+1, filename, sizeof(filename));
+ if (fileNameLen < 1) {
+ PrintAndLog("No filename found after f");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'k':
+ case 'K':
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr, sizeof(tempStr));
+ if (dataLen == 16) {
+ errors = param_gethex(tempStr, 0, KEY, dataLen);
+ } else if (dataLen == 1) {
+ keyNbr = param_get8(Cmd, cmdp+1);
+ if (keyNbr < ICLASS_KEYS_MAX) {
+ memcpy(KEY, iClass_Key_Table[keyNbr], 8);
+ } else {
+ PrintAndLog("\nERROR: Credit KeyNbr is invalid\n");
+ errors = true;
+ }
+ } else {
+ PrintAndLog("\nERROR: Credit Key is incorrect length\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'l':
+ case 'L':
+ if (param_gethex(Cmd, cmdp+1, &endblock, 2)) {
+ PrintAndLog("Start Block No must include 2 HEX symbols\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'r':
+ case 'R':
+ rawkey = true;
+ cmdp++;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'\n", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ if(errors) return usage_hf_iclass_clone();
+ }
+
+ if (cmdp < 8) return usage_hf_iclass_clone();
+
+ FILE *f;
+
+ iclass_block_t tag_data[USB_CMD_DATA_SIZE/12];
+
+ if ((endblock-startblock+1)*12 > USB_CMD_DATA_SIZE) {
+ PrintAndLog("Trying to write too many blocks at once. Max: %d", USB_CMD_DATA_SIZE/8);
+ }
+ // file handling and reading
+ f = fopen(filename,"rb");
+ if(!f) {
+ PrintAndLog("Failed to read from file '%s'", filename);
+ return 1;
+ }
+
+ if (startblock<5) {
+ PrintAndLog("You cannot write key blocks this way. yet... make your start block > 4");
+ fclose(f);
+ return 0;
+ }
+ // now read data from the file from block 6 --- 19
+ // ok we will use this struct [data 8 bytes][MAC 4 bytes] for each block calculate all mac number for each data
+ // then copy to usbcommand->asbytes; the max is 32 - 6 = 24 block 12 bytes each block 288 bytes then we can only accept to clone 21 blocks at the time,
+ // else we have to create a share memory
+ int i;
+ fseek(f,startblock*8,SEEK_SET);
+ if ( fread(tag_data,sizeof(iclass_block_t),endblock - startblock + 1,f) == 0 ) {
+ PrintAndLog("File reading error.");
+ fclose(f);
+ return 2;
+ }
+
+ uint8_t MAC[4]={0x00,0x00,0x00,0x00};
+ uint8_t div_key[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+
+ if (!select_and_auth(KEY, MAC, div_key, use_credit_key, elite, rawkey, true))
+ return 0;
+
+ UsbCommand w = {CMD_ICLASS_CLONE,{startblock,endblock}};
+ uint8_t *ptr;
+ // calculate all mac for every the block we will write
+ for (i = startblock; i <= endblock; i++){
+ Calc_wb_mac(i,tag_data[i - startblock].d,div_key,MAC);
+ // usb command d start pointer = d + (i - 6) * 12
+ // memcpy(pointer,tag_data[i - 6],8) 8 bytes
+ // memcpy(pointer + 8,mac,sizoof(mac) 4 bytes;
+ // next one
+ ptr = w.d.asBytes + (i - startblock) * 12;
+ memcpy(ptr, &(tag_data[i - startblock].d[0]), 8);
+ memcpy(ptr + 8,MAC, 4);
+ }
+ uint8_t p[12];
+ for (i = 0; i <= endblock - startblock;i++){
+ memcpy(p,w.d.asBytes + (i * 12),12);
+ printf("Block |%02x|",i + startblock);
+ printf(" %02x%02x%02x%02x%02x%02x%02x%02x |",p[0],p[1],p[2],p[3],p[4],p[5],p[6],p[7]);
+ printf(" MAC |%02x%02x%02x%02x|\n",p[8],p[9],p[10],p[11]);
+ }
+ UsbCommand resp;
+ SendCommand(&w);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,4500))
+ {
+ PrintAndLog("Command execute timeout");
+ return 0;
+ }
+ return 1;
+}
+
+static int ReadBlock(uint8_t *KEY, uint8_t blockno, uint8_t keyType, bool elite, bool rawkey, bool verbose, bool auth) {
+ uint8_t MAC[4]={0x00,0x00,0x00,0x00};
+ uint8_t div_key[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+
+ if (auth) {
+ if (!select_and_auth(KEY, MAC, div_key, (keyType==0x18), elite, rawkey, verbose))
+ return 0;
+ } else {
+ uint8_t CSN[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CCNR[12]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ if (!select_only(CSN, CCNR, (keyType==0x18), verbose))
+ return 0;
+ }
+
+ UsbCommand resp;
+ UsbCommand w = {CMD_ICLASS_READBLOCK, {blockno}};
+ clearCommandBuffer();
+ SendCommand(&w);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,4500))
+ {
+ PrintAndLog("Command execute timeout");
+ return 0;
+ }
+ uint8_t isOK = resp.arg[0] & 0xff;
+ if (!isOK) {
+ PrintAndLog("Read Block Failed");
+ return 0;
+ }
+ //data read is stored in: resp.d.asBytes[0-15]
+ if (verbose) PrintAndLog("Block %02X: %s\n",blockno, sprint_hex(resp.d.asBytes,8));
+ return 1;
+}
+
+int usage_hf_iclass_readblock(void) {
+ PrintAndLog("Usage: hf iclass readblk b <Block> k <Key> c e|r\n");
+ PrintAndLog("Options:");
+ PrintAndLog(" b <Block> : The block number as 2 hex symbols");
+ PrintAndLog(" k <Key> : Access Key as 16 hex symbols or 1 hex to select key from memory");
+ PrintAndLog(" c : If 'c' is specified, the key set is assumed to be the credit key\n");
+ PrintAndLog(" e : If 'e' is specified, elite computations applied to key");
+ PrintAndLog(" r : If 'r' is specified, no computations applied to key");
+ PrintAndLog("Samples:");
+ PrintAndLog(" hf iclass readblk b 06 k 0011223344556677");
+ PrintAndLog(" hf iclass readblk b 1B k 0011223344556677 c");
+ PrintAndLog(" hf iclass readblk b 0A k 0");
+ return 0;
+}
+
+int CmdHFiClass_ReadBlock(const char *Cmd) {
+ uint8_t blockno=0;
+ uint8_t keyType = 0x88; //debit key
+ uint8_t KEY[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t keyNbr = 0;
+ uint8_t dataLen = 0;
+ char tempStr[50] = {0};
+ bool elite = false;
+ bool rawkey = false;
+ bool errors = false;
+ bool auth = false;
+ uint8_t cmdp = 0;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_iclass_readblock();
+ case 'b':
+ case 'B':
+ if (param_gethex(Cmd, cmdp+1, &blockno, 2)) {
+ PrintAndLog("Block No must include 2 HEX symbols\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'c':
+ case 'C':
+ keyType = 0x18;
+ cmdp++;
+ break;
+ case 'e':
+ case 'E':
+ elite = true;
+ cmdp++;
+ break;
+ case 'k':
+ case 'K':
+ auth = true;
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr, sizeof(tempStr));
+ if (dataLen == 16) {
+ errors = param_gethex(tempStr, 0, KEY, dataLen);
+ } else if (dataLen == 1) {
+ keyNbr = param_get8(Cmd, cmdp+1);
+ if (keyNbr < ICLASS_KEYS_MAX) {
+ memcpy(KEY, iClass_Key_Table[keyNbr], 8);
+ } else {
+ PrintAndLog("\nERROR: Credit KeyNbr is invalid\n");
+ errors = true;
+ }
+ } else {
+ PrintAndLog("\nERROR: Credit Key is incorrect length\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'r':
+ case 'R':
+ rawkey = true;
+ cmdp++;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'\n", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ if(errors) return usage_hf_iclass_readblock();
+ }
+
+ if (cmdp < 2) return usage_hf_iclass_readblock();
+ if (!auth)
+ PrintAndLog("warning: no authentication used with read, only a few specific blocks can be read accurately without authentication.");
+ return ReadBlock(KEY, blockno, keyType, elite, rawkey, true, auth);
projects / proxmark3-svn / blobdiff