FIX: a shot at fixing the "_" underscore problem in fileutils.c. This one uses _ifde...

[proxmark3-svn] / armsrc / iso14443a.c

diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c
index 7dfa53e7351834bf44263471a4ab44cf3b23455d..8399c6f84bb7e24eeeeee8258622dd7b60930d95 100644 (file)
--- a/armsrc/iso14443a.c
+++ b/armsrc/iso14443a.c
@@ -310,10 +310,11 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time)
        if (Uart.state == STATE_UNSYNCD) {                                                                                      // not yet synced
        
                if (Uart.highCnt < 7) {                                                                                                 // wait for a stable unmodulated signal
-                       if (Uart.twoBits == 0xffff)
+                       if (Uart.twoBits == 0xffff) {
                                Uart.highCnt++;
-                       else
+                       } else {
                                Uart.highCnt = 0;
+                       }
                } else {
                        Uart.syncBit = 0xFFFF; // not set
                        // look for 00xx1111 (the start bit)
@@ -393,8 +394,12 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time)
                                } else if (Uart.len & 0x0007) {                 // there are some parity bits to store
                                        Uart.parityBits <<= (8 - (Uart.len & 0x0007)); // left align remaining parity bits
                                        Uart.parity[Uart.parityLen++] = Uart.parityBits; // and store them
-                                       return TRUE;                                            // we are finished with decoding the raw data sequence
                                        }
+                                       if ( Uart.len) {
+                                       return TRUE;                                            // we are finished with decoding the raw data sequence
+                                       } else {
+                                               UartReset();                                    // Nothing receiver - start over
+                                       }                                       
                                }
                                if (Uart.state == STATE_START_OF_COMMUNICATION) {                               // error - must not follow directly after SOC
                                        UartReset();
@@ -555,6 +560,8 @@ static RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non
                                        } else if (Demod.len & 0x0007) { // there are some parity bits to store
                                                Demod.parityBits <<= (8 - (Demod.len & 0x0007)); // left align remaining parity bits
                                                Demod.parity[Demod.parityLen++] = Demod.parityBits; // and store them
+                                       }
+                                       if (Demod.len) {
                                        return TRUE; // we are finished with decoding the raw data sequence
                                } else {                                                                                                // nothing received. Start over
                                        DemodReset();
@@ -1602,8 +1609,7 @@ int EmSendCmdPar(uint8_t *resp, uint16_t respLen, uint8_t *par){
 bool EmLogTrace(uint8_t *reader_data, uint16_t reader_len, uint32_t reader_StartTime, uint32_t reader_EndTime, uint8_t *reader_Parity,
                                 uint8_t *tag_data, uint16_t tag_len, uint32_t tag_StartTime, uint32_t tag_EndTime, uint8_t *tag_Parity)
 {
-       if (!tracing) return true;
-
+       if (tracing) {
        // we cannot exactly measure the end and start of a received command from reader. However we know that the delay from
        // end of the received command to start of the tag's (simulated by us) answer is n*128+20 or n*128+84 resp.
        // with n >= 9. The start of the tags answer can be measured and therefore the end of the received command be calculated:
@@ -1614,8 +1620,10 @@ bool EmLogTrace(uint8_t *reader_data, uint16_t reader_len, uint32_t reader_Start
        reader_StartTime = reader_EndTime - reader_modlen;
        if (!LogTrace(reader_data, reader_len, reader_StartTime, reader_EndTime, reader_Parity, TRUE)) {
                return FALSE;
-       } else 
-               return(!LogTrace(tag_data, tag_len, tag_StartTime, tag_EndTime, tag_Parity, FALSE));
+               } else return(!LogTrace(tag_data, tag_len, tag_StartTime, tag_EndTime, tag_Parity, FALSE));
+       } else {
+               return TRUE;
+       }
 }
 
 //-----------------------------------------------------------------------------
@@ -1625,7 +1633,7 @@ bool EmLogTrace(uint8_t *reader_data, uint16_t reader_len, uint32_t reader_Start
 //-----------------------------------------------------------------------------
 static int GetIso14443aAnswerFromTag(uint8_t *receivedResponse, uint8_t *receivedResponsePar, uint16_t offset)
 {
-       uint16_t c;
+       uint32_t c;
        
        // Set FPGA mode to "reader listen mode", no modulation (listen
        // only, since we are receiving, not transmitting).
@@ -1703,7 +1711,6 @@ int ReaderReceiveOffset(uint8_t* receivedAnswer, uint16_t offset, uint8_t *parit
 int ReaderReceive(uint8_t *receivedAnswer, uint8_t *parity)
 {
        if (!GetIso14443aAnswerFromTag(receivedAnswer, parity, 0)) return FALSE;
-
        if (tracing) {
                LogTrace(receivedAnswer, Demod.len, Demod.startTime*16 - DELAY_AIR2ARM_AS_READER, Demod.endTime*16 - DELAY_AIR2ARM_AS_READER, parity, FALSE);
        }
@@ -1714,7 +1721,9 @@ int ReaderReceive(uint8_t *receivedAnswer, uint8_t *parity)
  * fills the uid pointer unless NULL
  * fills resp_data unless NULL */
 int iso14443a_select_card(byte_t* uid_ptr, iso14a_card_select_t* p_hi14a_card, uint32_t* cuid_ptr) {
-       //uint8_t halt[]       = { 0x50 };  // HALT
+       
+       //uint8_t deselect[]   = {0xc2};  //DESELECT
+       //uint8_t halt[]       = { 0x50, 0x00, 0x57, 0xCD };  // HALT
        uint8_t wupa[]       = { 0x52 };  // WAKE-UP
        //uint8_t reqa[]       = { 0x26 };  // REQUEST A
        uint8_t sel_all[]    = { 0x93,0x20 };
@@ -1727,10 +1736,11 @@ int iso14443a_select_card(byte_t* uid_ptr, iso14a_card_select_t* p_hi14a_card, u
        size_t uid_resp_len;
        uint8_t sak = 0x04; // cascade uid
        int cascade_level = 0;
-       int len;
+       int len =0;
        
        // test for the SKYLANDERS TOY.
-       //ReaderTransmit(halt,sizeof(halt), NULL);
+       // ReaderTransmit(deselect,sizeof(deselect), NULL);
+       // len = ReaderReceive(resp, resp_par);
        
        // Broadcast for a card, WUPA (0x52) will force response from all cards in the field
        ReaderTransmitBitsPar(wupa,7,0, NULL);
@@ -1806,9 +1816,12 @@ int iso14443a_select_card(byte_t* uid_ptr, iso14a_card_select_t* p_hi14a_card, u
     ReaderTransmit(sel_uid,sizeof(sel_uid), NULL);
 
     // Receive the SAK
-    if (!ReaderReceive(resp, resp_par)) return 0;
+    if (!ReaderReceive(resp, resp_par)){
+               return 0;
+       }
+       
+       
     sak = resp[0];
-
        
     // Test if more parts of the uid are coming
     if ((sak & 0x04) /* && uid_resp[0] == 0x88 */) {
@@ -1836,16 +1849,16 @@ int iso14443a_select_card(byte_t* uid_ptr, iso14a_card_select_t* p_hi14a_card, u
     p_hi14a_card->ats_len = 0;
   }
 
-       if( (sak & 0x20) == 0) {
-               return 2; // non iso14443a compliant tag
-       }
-
+       // non iso14443a compliant tag
+       if( (sak & 0x20) == 0) return 2; 
+       
        // Request for answer to select
        AppendCrc14443a(rats, 2);
        ReaderTransmit(rats, sizeof(rats), NULL);
+       
+       if (!(len = ReaderReceive(resp, resp_par))) return 0;
 
-       if (!(len = ReaderReceive(resp, resp_par))) return 2;
-
+       
        if(p_hi14a_card) {
                memcpy(p_hi14a_card->ats, resp, sizeof(p_hi14a_card->ats));
                p_hi14a_card->ats_len = len;