fix clock detection when ST used

[proxmark3-svn] / armsrc / mifarecmd.c

diff --git a/armsrc/mifarecmd.c b/armsrc/mifarecmd.c
index fd6fde63d2b54db97a999b8619954789a57bdcdf..a3d6609db3413a136b6d5415e3296e103f90a28a 100644 (file)
--- a/armsrc/mifarecmd.c
+++ b/armsrc/mifarecmd.c
@@ -1143,6 +1143,7 @@ void MifareCGetBlock(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datai
        // bit 2 - need HALT after sequence\r
        // bit 3 - need init FPGA and field before sequence\r
        // bit 4 - need reset FPGA and LED\r
        // bit 2 - need HALT after sequence\r
        // bit 3 - need init FPGA and field before sequence\r
        // bit 4 - need reset FPGA and LED\r

+       // bit 5 - need to set datain instead of issuing USB reply (called via ARM for StandAloneMode14a)\r

        uint8_t workFlags = arg0;\r
        uint8_t blockNo = arg2;\r
        \r
        uint8_t workFlags = arg0;\r
        uint8_t blockNo = arg2;\r
        \r


@@ -1202,7 +1203,12 @@ void MifareCGetBlock(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datai
        }\r
        \r
        LED_B_ON();\r
        }\r
        \r
        LED_B_ON();\r

-       cmd_send(CMD_ACK,isOK,0,0,data,18);\r
+       if (workFlags & 0x20) {\r
+               if (isOK)\r
+                       memcpy(datain, data, 18);\r
+       }\r
+       else\r
+               cmd_send(CMD_ACK,isOK,0,0,data,18);\r

        LED_B_OFF();\r
 \r
        if ((workFlags & 0x10) || (!isOK)) {\r
        LED_B_OFF();\r
 \r
        if ((workFlags & 0x10) || (!isOK)) {\r